[PATCH V5 1/6] ARM: dts: imx6sx-sabreauto: add PMIC support

[shawnguo@kernel.org (Shawn Guo)]

On Thu, Apr 26, 2018 at 02:58:13PM +0800, Anson Huang wrote:
> Add pfuze100 support on i.MX6SX Sabre Auto board.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> no changes since V4.
>  arch/arm/boot/dts/imx6sx-sabreauto.dts | 117 +++++++++++++++++++++++++++++++++
>  1 file changed, 117 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> index 57d1ea0..2caca934 100644
> --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> @@ -74,6 +74,14 @@
>  
>  &iomuxc {
>  	imx6x-sabreauto {
> +

Drop this newline.

> +		pinctrl_i2c2_1: i2c2grp-1 {

The suffix "1" doesn't make any sense now.

	pinctrl_i2c2: i2c2grp {

> +			fsl,pins = <
> +				MX6SX_PAD_GPIO1_IO03__I2C2_SDA          0x4001b8b1
> +				MX6SX_PAD_GPIO1_IO02__I2C2_SCL          0x4001b8b1
> +			>;
> +		};
> +
>  		pinctrl_uart1: uart1grp {
>  			fsl,pins = <
>  				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
> @@ -148,3 +156,112 @@
>  		};
>  	};
>  };
> +
> +&i2c2 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2_1>;
> +	status = "okay";
> +
> +	pmic: pfuze100 at 08 {

Use generic name for node, and specific name for label.  Also, drop the
leading zeros in unit-address.

	pfuze100: pmic at 8 {

Shawn

> +		compatible = "fsl,pfuze100";
> +		reg = <0x08>;
> +
> +		regulators {
> +			sw1a_reg: sw1ab {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw1c_reg: sw1c {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw2_reg: sw2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3a_reg: sw3a {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3b_reg: sw3b {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw4_reg: sw4 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			swbst_reg: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +			};
> +
> +			snvs_reg: vsnvs {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vref_reg: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vgen1 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen2_reg: vgen2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen3_reg: vgen3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen4_reg: vgen4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vgen5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vgen6 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.7.4
>