From: ryan@edited.us (Ryan Grachek)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: hikey960: Remove keep-power-in-suspend property
Date: Fri, 13 Jul 2018 10:53:48 -0500 [thread overview]
Message-ID: <20180713155348.24343-1-ryan@edited.us> (raw)
Remove the keep-power-in-suspend property because it keeps wifi power
on during suspend. This property is only required when enabling WoWLAN
and should only be enabled based on need. Also remove dupplicate property
Signed-off-by: Ryan Grachek <ryan@edited.us>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 1 -
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 68c5a6c819ae..a927ce4ec40b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -586,7 +586,6 @@
ti,non-removable;
non-removable;
cap-power-off-card;
- keep-power-in-suspend;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "ok";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 8d477dcbfa58..4588fe4e00a8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1050,7 +1050,6 @@
reset-names = "reset";
card-detect-delay = <200>;
supports-highspeed;
- keep-power-in-suspend;
pinctrl-names = "default";
pinctrl-0 = <&sdio_pmx_func
&sdio_clk_cfg_func
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Ryan Grachek <ryan@edited.us>
Cc: john.stultz@linaro.org, Ryan Grachek <ryan@edited.us>,
Wei Xu <xuwei5@hisilicon.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: hikey960: Remove keep-power-in-suspend property
Date: Fri, 13 Jul 2018 10:53:48 -0500 [thread overview]
Message-ID: <20180713155348.24343-1-ryan@edited.us> (raw)
Remove the keep-power-in-suspend property because it keeps wifi power
on during suspend. This property is only required when enabling WoWLAN
and should only be enabled based on need. Also remove dupplicate property
Signed-off-by: Ryan Grachek <ryan@edited.us>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 1 -
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 68c5a6c819ae..a927ce4ec40b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -586,7 +586,6 @@
ti,non-removable;
non-removable;
cap-power-off-card;
- keep-power-in-suspend;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "ok";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 8d477dcbfa58..4588fe4e00a8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1050,7 +1050,6 @@
reset-names = "reset";
card-detect-delay = <200>;
supports-highspeed;
- keep-power-in-suspend;
pinctrl-names = "default";
pinctrl-0 = <&sdio_pmx_func
&sdio_clk_cfg_func
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Ryan Grachek <ryan@edited.us>
To: unlisted-recipients:; (no To-header on input)
Cc: john.stultz@linaro.org, Ryan Grachek <ryan@edited.us>,
Wei Xu <xuwei5@hisilicon.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: hikey960: Remove keep-power-in-suspend property
Date: Fri, 13 Jul 2018 10:53:48 -0500 [thread overview]
Message-ID: <20180713155348.24343-1-ryan@edited.us> (raw)
Remove the keep-power-in-suspend property because it keeps wifi power
on during suspend. This property is only required when enabling WoWLAN
and should only be enabled based on need. Also remove dupplicate property
Signed-off-by: Ryan Grachek <ryan@edited.us>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 1 -
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 68c5a6c819ae..a927ce4ec40b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -586,7 +586,6 @@
ti,non-removable;
non-removable;
cap-power-off-card;
- keep-power-in-suspend;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "ok";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 8d477dcbfa58..4588fe4e00a8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1050,7 +1050,6 @@
reset-names = "reset";
card-detect-delay = <200>;
supports-highspeed;
- keep-power-in-suspend;
pinctrl-names = "default";
pinctrl-0 = <&sdio_pmx_func
&sdio_clk_cfg_func
--
2.11.0
next reply other threads:[~2018-07-13 15:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-13 15:53 Ryan Grachek [this message]
2018-07-13 15:53 ` [PATCH] arm64: dts: hikey960: Remove keep-power-in-suspend property Ryan Grachek
2018-07-13 15:53 ` Ryan Grachek
2018-07-18 15:33 ` Wei Xu
2018-07-18 15:33 ` Wei Xu
2018-07-18 15:33 ` Wei Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180713155348.24343-1-ryan@edited.us \
--to=ryan@edited.us \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.