All of lore.kernel.org
 help / color / mirror / Atom feed
From: gregory.clement@bootlin.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next v2 0/7] A fix and a few improvements on mvneta
Date: Fri, 13 Jul 2018 18:18:34 +0200	[thread overview]
Message-ID: <20180713161841.11202-1-gregory.clement@bootlin.com> (raw)

Hello,

This series brings some improvements for the mvneta driver and also
adds a fix.

Compared to the v1, the main change is the a new patch fixing a bug
which is visible in net-next. Now the mvneta driver just crashes when
opening on Armada 37xx. As indicated in the patch, the bug was there
since many releases but the problem is only visible now.

The series had been tested on ARM32 (clearfog) and ARM64
(EspressoBin), with and without hardware buffer management.

Gregory

Chnagelog:
v1 -> v2

 - In patch 2, use EXPORT_SYMBOL_GPL for mvneta_bm_get and
   mvneta_bm_put to be used in module, reported by kbuild test robot.

 - In patch 4, add the counter to the driver's ethtool state,
   suggested by David Miller.

 - In patch 6, use a single if, suggested by Marcin Wojtas

Andrew Lunn (1):
  net: ethernet: mvneta: Fix napi structure mixup on armada 3700

Gregory CLEMENT (3):
  net: mvneta: remove data pointer usage from device_node structure
  net: mvneta: discriminate error cause for missed packet
  net: mvneta: Allocate page for the descriptor

Yelena Krivosheev (3):
  net: mvneta: increase number of buffers in RX and TX queue
  net: mvneta: Verify hardware checksum only when offload checksum
    feature is set
  net: mvneta: Improve the buffer allocation method for SWBM

 drivers/net/ethernet/marvell/mvneta.c    | 412 ++++++++++++++---------
 drivers/net/ethernet/marvell/mvneta_bm.c |  15 +
 drivers/net/ethernet/marvell/mvneta_bm.h |   8 +-
 3 files changed, 274 insertions(+), 161 deletions(-)

-- 
2.18.0

WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: "David S. Miller" <davem@davemloft.net>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Cc: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	linux-arm-kernel@lists.infradead.org,
	"Jason Cooper" <jason@lakedaemon.net>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Yelena Krivosheev" <yelena@marvell.com>,
	"Nadav Haklai" <nadavh@marvell.com>,
	"Marcin Wojtas" <mw@semihalf.com>,
	"Dmitri Epshtein" <dima@marvell.com>,
	"Antoine Tenart" <antoine.tenart@bootlin.com>,
	"Miquèl Raynal" <miquel.raynal@bootlin.com>,
	"Maxime Chevallier" <maxime.chevallier@bootlin.com>
Subject: [PATCH net-next v2 0/7] A fix and a few improvements on mvneta
Date: Fri, 13 Jul 2018 18:18:34 +0200	[thread overview]
Message-ID: <20180713161841.11202-1-gregory.clement@bootlin.com> (raw)

Hello,

This series brings some improvements for the mvneta driver and also
adds a fix.

Compared to the v1, the main change is the a new patch fixing a bug
which is visible in net-next. Now the mvneta driver just crashes when
opening on Armada 37xx. As indicated in the patch, the bug was there
since many releases but the problem is only visible now.

The series had been tested on ARM32 (clearfog) and ARM64
(EspressoBin), with and without hardware buffer management.

Gregory

Chnagelog:
v1 -> v2

 - In patch 2, use EXPORT_SYMBOL_GPL for mvneta_bm_get and
   mvneta_bm_put to be used in module, reported by kbuild test robot.

 - In patch 4, add the counter to the driver's ethtool state,
   suggested by David Miller.

 - In patch 6, use a single if, suggested by Marcin Wojtas

Andrew Lunn (1):
  net: ethernet: mvneta: Fix napi structure mixup on armada 3700

Gregory CLEMENT (3):
  net: mvneta: remove data pointer usage from device_node structure
  net: mvneta: discriminate error cause for missed packet
  net: mvneta: Allocate page for the descriptor

Yelena Krivosheev (3):
  net: mvneta: increase number of buffers in RX and TX queue
  net: mvneta: Verify hardware checksum only when offload checksum
    feature is set
  net: mvneta: Improve the buffer allocation method for SWBM

 drivers/net/ethernet/marvell/mvneta.c    | 412 ++++++++++++++---------
 drivers/net/ethernet/marvell/mvneta_bm.c |  15 +
 drivers/net/ethernet/marvell/mvneta_bm.h |   8 +-
 3 files changed, 274 insertions(+), 161 deletions(-)

-- 
2.18.0


             reply	other threads:[~2018-07-13 16:18 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-13 16:18 Gregory CLEMENT [this message]
2018-07-13 16:18 ` [PATCH net-next v2 0/7] A fix and a few improvements on mvneta Gregory CLEMENT
2018-07-13 16:18 ` [PATCH net-next v2 1/7] net: ethernet: mvneta: Fix napi structure mixup on armada 3700 Gregory CLEMENT
2018-07-13 16:18   ` Gregory CLEMENT
2018-07-13 16:18 ` [PATCH net-next v2 2/7] net: mvneta: remove data pointer usage from device_node structure Gregory CLEMENT
2018-07-13 16:18   ` Gregory CLEMENT
2018-07-13 16:18 ` [PATCH net-next v2 3/7] net: mvneta: increase number of buffers in RX and TX queue Gregory CLEMENT
2018-07-13 16:18   ` Gregory CLEMENT
2018-07-13 19:17   ` Russell King - ARM Linux
2018-07-13 19:17     ` Russell King - ARM Linux
2018-07-18 15:37     ` Gregory CLEMENT
2018-07-18 15:37       ` Gregory CLEMENT
2018-07-18 20:55       ` Dave Taht
2018-07-18 20:55         ` Dave Taht
2018-07-13 16:18 ` [PATCH net-next v2 4/7] net: mvneta: discriminate error cause for missed packet Gregory CLEMENT
2018-07-13 16:18   ` Gregory CLEMENT
2018-07-13 16:18 ` [PATCH net-next v2 5/7] net: mvneta: Allocate page for the descriptor Gregory CLEMENT
2018-07-13 16:18   ` Gregory CLEMENT
2018-07-14  1:23   ` David Miller
2018-07-14  1:23     ` David Miller
2018-07-13 16:18 ` [PATCH net-next v2 6/7] net: mvneta: Verify hardware checksum only when offload checksum feature is set Gregory CLEMENT
2018-07-13 16:18   ` Gregory CLEMENT
2018-07-13 16:18 ` [PATCH net-next v2 7/7] net: mvneta: Improve the buffer allocation method for SWBM Gregory CLEMENT
2018-07-13 16:18   ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180713161841.11202-1-gregory.clement@bootlin.com \
    --to=gregory.clement@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.