Re: [PATCH v4 5/5] rtc: isl1219: add device tree docu

[Alexandre Belloni <alexandre.belloni@bootlin.com>]

Hi,

On 10/07/2018 09:44:15+0000, Denis OSTERLAND wrote:
> From: Denis Osterland <Denis.Osterland@diehl.com>
> 
> The devicetree documentation for the ISL1219 device tree
> binding is added with an short example. It is not a trivial
> device, because it supports two interrupt souces.
> 
> Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
> ---
>  .../devicetree/bindings/rtc/isil,isl1219.txt  | 29 +++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/isil,isl1219.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1219.txt b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
> new file mode 100644
> index 000000000000..f26f1e9d4bde
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
> @@ -0,0 +1,29 @@
> +Intersil ISL1219 I2C RTC/Alarm chip with event in
> +
> +ISL1219 has additional pins EVIN and #EVDET for tamper detection.
> +
> +Required properties supported by the device:
> +
> + - "compatible": must be "isil,isl1219"
> + - "reg": I2C bus address of the device
> +
> +Optional properties:
> +
> + - "interrupt-names": list which may contains "irq" and "evdet"
> + - "interrupt-parent", "interrupts", "interrupts-extended":
> +   for passing the interrupt line of the SoC connected to #IRQ pin
> +   and #EVDET pin of the RTC chip.
> + - "isil,ev-evienb": if present bit can be set to disable event input pull-up

I would use a clearer name for that property like isil,ev-pull-up-enabled.

Also make it an int so 0 is disabling the pull-up (EVIENB set to 1) 1 is
enabling the pull-up (EVIENB set to 0) and do nothing when the property
is not present.


-- 
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com