[PATCH] selftests: net: move fragment forwarding/config up a level

[PATCH] selftests: net: move fragment forwarding/config up a level

[anders.roxell]

'make kselftest-merge' assumes that the config files for the tests are
located under the 'main' tet dir, like tools/testing/selftests/net/ and
not in a subdir to net.

Signed-off-by: Anders Roxell <anders.roxell at linaro.org>
---
 tools/testing/selftests/net/config            | 13 +++++++++----
 tools/testing/selftests/net/forwarding/config | 12 ------------
 2 files changed, 9 insertions(+), 16 deletions(-)
 delete mode 100644 tools/testing/selftests/net/forwarding/config

diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index cd3a2f1545b5..b344619b34f2 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -2,15 +2,20 @@ CONFIG_USER_NS=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_TEST_BPF=m
 CONFIG_NUMA=y
-CONFIG_NET_VRF=y
+CONFIG_NET_VRF=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_IPV6=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_VETH=y
+CONFIG_VETH=m
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_NET_IPVTI=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_IPV6_VTI=y
 CONFIG_DUMMY=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_CGROUP_BPF=y
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
diff --git a/tools/testing/selftests/net/forwarding/config b/tools/testing/selftests/net/forwarding/config
deleted file mode 100644
index 5cd2aed97958..000000000000
--- a/tools/testing/selftests/net/forwarding/config
+++ /dev/null
@@ -1,12 +0,0 @@
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BRIDGE_VLAN_FILTERING=y
-CONFIG_NET_L3_MASTER_DEV=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_NET_VRF=m
-CONFIG_BPF_SYSCALL=y
-CONFIG_CGROUP_BPF=y
-CONFIG_NET_CLS_FLOWER=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_VETH=m
-- 
2.18.0

[PATCH] selftests: net: move fragment forwarding/config up a level

[Anders Roxell]

'make kselftest-merge' assumes that the config files for the tests are
located under the 'main' tet dir, like tools/testing/selftests/net/ and
not in a subdir to net.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
---
 tools/testing/selftests/net/config            | 13 +++++++++----
 tools/testing/selftests/net/forwarding/config | 12 ------------
 2 files changed, 9 insertions(+), 16 deletions(-)
 delete mode 100644 tools/testing/selftests/net/forwarding/config

diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index cd3a2f1545b5..b344619b34f2 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -2,15 +2,20 @@ CONFIG_USER_NS=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_TEST_BPF=m
 CONFIG_NUMA=y
-CONFIG_NET_VRF=y
+CONFIG_NET_VRF=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_IPV6=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_VETH=y
+CONFIG_VETH=m
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_NET_IPVTI=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_IPV6_VTI=y
 CONFIG_DUMMY=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_CGROUP_BPF=y
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
diff --git a/tools/testing/selftests/net/forwarding/config b/tools/testing/selftests/net/forwarding/config
deleted file mode 100644
index 5cd2aed97958..000000000000
--- a/tools/testing/selftests/net/forwarding/config
+++ /dev/null
@@ -1,12 +0,0 @@
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BRIDGE_VLAN_FILTERING=y
-CONFIG_NET_L3_MASTER_DEV=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_NET_VRF=m
-CONFIG_BPF_SYSCALL=y
-CONFIG_CGROUP_BPF=y
-CONFIG_NET_CLS_FLOWER=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_VETH=m
-- 
2.18.0

[PATCH] selftests: net: move fragment forwarding/config up a level

[Anders Roxell]

'make kselftest-merge' assumes that the config files for the tests are
located under the 'main' tet dir, like tools/testing/selftests/net/ and
not in a subdir to net.

Signed-off-by: Anders Roxell <anders.roxell at linaro.org>
---
 tools/testing/selftests/net/config            | 13 +++++++++----
 tools/testing/selftests/net/forwarding/config | 12 ------------
 2 files changed, 9 insertions(+), 16 deletions(-)
 delete mode 100644 tools/testing/selftests/net/forwarding/config

diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index cd3a2f1545b5..b344619b34f2 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -2,15 +2,20 @@ CONFIG_USER_NS=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_TEST_BPF=m
 CONFIG_NUMA=y
-CONFIG_NET_VRF=y
+CONFIG_NET_VRF=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_IPV6=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_VETH=y
+CONFIG_VETH=m
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_NET_IPVTI=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_IPV6_VTI=y
 CONFIG_DUMMY=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_CGROUP_BPF=y
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
diff --git a/tools/testing/selftests/net/forwarding/config b/tools/testing/selftests/net/forwarding/config
deleted file mode 100644
index 5cd2aed97958..000000000000
--- a/tools/testing/selftests/net/forwarding/config
+++ /dev/null
@@ -1,12 +0,0 @@
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BRIDGE_VLAN_FILTERING=y
-CONFIG_NET_L3_MASTER_DEV=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_NET_VRF=m
-CONFIG_BPF_SYSCALL=y
-CONFIG_CGROUP_BPF=y
-CONFIG_NET_CLS_FLOWER=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_VETH=m
-- 
2.18.0

[PATCH] selftests: net: move fragment forwarding/config up a level

[idosch]

On Tue, Aug 21, 2018 at 06:12:12PM +0200, Anders Roxell wrote:
> 'make kselftest-merge' assumes that the config files for the tests are
> located under the 'main' tet dir, like tools/testing/selftests/net/ and
> not in a subdir to net.

The tests under tools/testing/selftests/net/forwarding/ aren't executed
as part of the Makefile. The config file is there mainly so that people
will know which config options they need in order to run the tests.

The tests can be added to the Makefile, but some of them take a few
minutes to complete which is probably against "Don't take too long;"
mentioned in Documentation/dev-tools/kselftest.rst.

Re: [PATCH] selftests: net: move fragment forwarding/config up a level

[Ido Schimmel]

On Tue, Aug 21, 2018 at 06:12:12PM +0200, Anders Roxell wrote:
> 'make kselftest-merge' assumes that the config files for the tests are
> located under the 'main' tet dir, like tools/testing/selftests/net/ and
> not in a subdir to net.

The tests under tools/testing/selftests/net/forwarding/ aren't executed
as part of the Makefile. The config file is there mainly so that people
will know which config options they need in order to run the tests.

The tests can be added to the Makefile, but some of them take a few
minutes to complete which is probably against "Don't take too long;"
mentioned in Documentation/dev-tools/kselftest.rst.

[PATCH] selftests: net: move fragment forwarding/config up a level

[Ido Schimmel]

On Tue, Aug 21, 2018@06:12:12PM +0200, Anders Roxell wrote:
> 'make kselftest-merge' assumes that the config files for the tests are
> located under the 'main' tet dir, like tools/testing/selftests/net/ and
> not in a subdir to net.

The tests under tools/testing/selftests/net/forwarding/ aren't executed
as part of the Makefile. The config file is there mainly so that people
will know which config options they need in order to run the tests.

The tests can be added to the Makefile, but some of them take a few
minutes to complete which is probably against "Don't take too long;"
mentioned in Documentation/dev-tools/kselftest.rst.

[PATCH] selftests: net: move fragment forwarding/config up a level

[shuah]

On 08/21/2018 12:56 PM, Ido Schimmel wrote:
> On Tue, Aug 21, 2018 at 06:12:12PM +0200, Anders Roxell wrote:
>> 'make kselftest-merge' assumes that the config files for the tests are
>> located under the 'main' tet dir, like tools/testing/selftests/net/ and
>> not in a subdir to net.
> 
> The tests under tools/testing/selftests/net/forwarding/ aren't executed
> as part of the Makefile. The config file is there mainly so that people
> will know which config options they need in order to run the tests.
> 
> The tests can be added to the Makefile, but some of them take a few
> minutes to complete which is probably against "Don't take too long;"
> mentioned in Documentation/dev-tools/kselftest.rst.
> 

I don't see any reason why these shouldn't be added. With the number of
tests that get run by default, time has gone up. The goal is to run more
tests not less. There are some stress/destructive tests that continue to
be left out of the Makefile.

thanks,
-- Shuah

Re: [PATCH] selftests: net: move fragment forwarding/config up a level

[Shuah Khan]

On 08/21/2018 12:56 PM, Ido Schimmel wrote:
> On Tue, Aug 21, 2018 at 06:12:12PM +0200, Anders Roxell wrote:
>> 'make kselftest-merge' assumes that the config files for the tests are
>> located under the 'main' tet dir, like tools/testing/selftests/net/ and
>> not in a subdir to net.
> 
> The tests under tools/testing/selftests/net/forwarding/ aren't executed
> as part of the Makefile. The config file is there mainly so that people
> will know which config options they need in order to run the tests.
> 
> The tests can be added to the Makefile, but some of them take a few
> minutes to complete which is probably against "Don't take too long;"
> mentioned in Documentation/dev-tools/kselftest.rst.
> 

I don't see any reason why these shouldn't be added. With the number of
tests that get run by default, time has gone up. The goal is to run more
tests not less. There are some stress/destructive tests that continue to
be left out of the Makefile.

thanks,
-- Shuah

[PATCH] selftests: net: move fragment forwarding/config up a level

[Shuah Khan]

On 08/21/2018 12:56 PM, Ido Schimmel wrote:
> On Tue, Aug 21, 2018@06:12:12PM +0200, Anders Roxell wrote:
>> 'make kselftest-merge' assumes that the config files for the tests are
>> located under the 'main' tet dir, like tools/testing/selftests/net/ and
>> not in a subdir to net.
> 
> The tests under tools/testing/selftests/net/forwarding/ aren't executed
> as part of the Makefile. The config file is there mainly so that people
> will know which config options they need in order to run the tests.
> 
> The tests can be added to the Makefile, but some of them take a few
> minutes to complete which is probably against "Don't take too long;"
> mentioned in Documentation/dev-tools/kselftest.rst.
> 

I don't see any reason why these shouldn't be added. With the number of
tests that get run by default, time has gone up. The goal is to run more
tests not less. There are some stress/destructive tests that continue to
be left out of the Makefile.

thanks,
-- Shuah

[PATCH] selftests: net: move fragment forwarding/config up a level

[idosch]

On Tue, Aug 21, 2018 at 01:41:54PM -0600, Shuah Khan wrote:
> On 08/21/2018 12:56 PM, Ido Schimmel wrote:
> > On Tue, Aug 21, 2018 at 06:12:12PM +0200, Anders Roxell wrote:
> >> 'make kselftest-merge' assumes that the config files for the tests are
> >> located under the 'main' tet dir, like tools/testing/selftests/net/ and
> >> not in a subdir to net.
> > 
> > The tests under tools/testing/selftests/net/forwarding/ aren't executed
> > as part of the Makefile. The config file is there mainly so that people
> > will know which config options they need in order to run the tests.
> > 
> > The tests can be added to the Makefile, but some of them take a few
> > minutes to complete which is probably against "Don't take too long;"
> > mentioned in Documentation/dev-tools/kselftest.rst.
> > 
> 
> I don't see any reason why these shouldn't be added. With the number of
> tests that get run by default, time has gone up. The goal is to run more
> tests not less. There are some stress/destructive tests that continue to
> be left out of the Makefile.

Thanks for clarifying. I'll add the tests.

Re: [PATCH] selftests: net: move fragment forwarding/config up a level

[Ido Schimmel]

On Tue, Aug 21, 2018 at 01:41:54PM -0600, Shuah Khan wrote:
> On 08/21/2018 12:56 PM, Ido Schimmel wrote:
> > On Tue, Aug 21, 2018 at 06:12:12PM +0200, Anders Roxell wrote:
> >> 'make kselftest-merge' assumes that the config files for the tests are
> >> located under the 'main' tet dir, like tools/testing/selftests/net/ and
> >> not in a subdir to net.
> > 
> > The tests under tools/testing/selftests/net/forwarding/ aren't executed
> > as part of the Makefile. The config file is there mainly so that people
> > will know which config options they need in order to run the tests.
> > 
> > The tests can be added to the Makefile, but some of them take a few
> > minutes to complete which is probably against "Don't take too long;"
> > mentioned in Documentation/dev-tools/kselftest.rst.
> > 
> 
> I don't see any reason why these shouldn't be added. With the number of
> tests that get run by default, time has gone up. The goal is to run more
> tests not less. There are some stress/destructive tests that continue to
> be left out of the Makefile.

Thanks for clarifying. I'll add the tests.

[PATCH] selftests: net: move fragment forwarding/config up a level

[Ido Schimmel]

On Tue, Aug 21, 2018@01:41:54PM -0600, Shuah Khan wrote:
> On 08/21/2018 12:56 PM, Ido Schimmel wrote:
> > On Tue, Aug 21, 2018@06:12:12PM +0200, Anders Roxell wrote:
> >> 'make kselftest-merge' assumes that the config files for the tests are
> >> located under the 'main' tet dir, like tools/testing/selftests/net/ and
> >> not in a subdir to net.
> > 
> > The tests under tools/testing/selftests/net/forwarding/ aren't executed
> > as part of the Makefile. The config file is there mainly so that people
> > will know which config options they need in order to run the tests.
> > 
> > The tests can be added to the Makefile, but some of them take a few
> > minutes to complete which is probably against "Don't take too long;"
> > mentioned in Documentation/dev-tools/kselftest.rst.
> > 
> 
> I don't see any reason why these shouldn't be added. With the number of
> tests that get run by default, time has gone up. The goal is to run more
> tests not less. There are some stress/destructive tests that continue to
> be left out of the Makefile.

Thanks for clarifying. I'll add the tests.

[PATCH] selftests: net: move fragment forwarding/config up a level

[shuah]

On 08/22/2018 12:45 AM, Ido Schimmel wrote:
> On Tue, Aug 21, 2018 at 01:41:54PM -0600, Shuah Khan wrote:
>> On 08/21/2018 12:56 PM, Ido Schimmel wrote:
>>> On Tue, Aug 21, 2018 at 06:12:12PM +0200, Anders Roxell wrote:
>>>> 'make kselftest-merge' assumes that the config files for the tests are
>>>> located under the 'main' tet dir, like tools/testing/selftests/net/ and
>>>> not in a subdir to net.
>>>
>>> The tests under tools/testing/selftests/net/forwarding/ aren't executed
>>> as part of the Makefile. The config file is there mainly so that people
>>> will know which config options they need in order to run the tests.
>>>
>>> The tests can be added to the Makefile, but some of them take a few
>>> minutes to complete which is probably against "Don't take too long;"
>>> mentioned in Documentation/dev-tools/kselftest.rst.
>>>
>>
>> I don't see any reason why these shouldn't be added. With the number of
>> tests that get run by default, time has gone up. The goal is to run more
>> tests not less. There are some stress/destructive tests that continue to
>> be left out of the Makefile.
> 
> Thanks for clarifying. I'll add the tests.
> 

Great. This change to move config up one level looks good to me. Dave takes net
selftest patches through net tree usually. So I will leave this up to take it
through his process.

Acked-by: Shuah Khan (Samsung OSG) <shuah at kernel.org>

thanks,
-- Shuah

Re: [PATCH] selftests: net: move fragment forwarding/config up a level

[Shuah Khan]

On 08/22/2018 12:45 AM, Ido Schimmel wrote:
> On Tue, Aug 21, 2018 at 01:41:54PM -0600, Shuah Khan wrote:
>> On 08/21/2018 12:56 PM, Ido Schimmel wrote:
>>> On Tue, Aug 21, 2018 at 06:12:12PM +0200, Anders Roxell wrote:
>>>> 'make kselftest-merge' assumes that the config files for the tests are
>>>> located under the 'main' tet dir, like tools/testing/selftests/net/ and
>>>> not in a subdir to net.
>>>
>>> The tests under tools/testing/selftests/net/forwarding/ aren't executed
>>> as part of the Makefile. The config file is there mainly so that people
>>> will know which config options they need in order to run the tests.
>>>
>>> The tests can be added to the Makefile, but some of them take a few
>>> minutes to complete which is probably against "Don't take too long;"
>>> mentioned in Documentation/dev-tools/kselftest.rst.
>>>
>>
>> I don't see any reason why these shouldn't be added. With the number of
>> tests that get run by default, time has gone up. The goal is to run more
>> tests not less. There are some stress/destructive tests that continue to
>> be left out of the Makefile.
> 
> Thanks for clarifying. I'll add the tests.
> 

Great. This change to move config up one level looks good to me. Dave takes net
selftest patches through net tree usually. So I will leave this up to take it
through his process.

Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>

thanks,
-- Shuah

[PATCH] selftests: net: move fragment forwarding/config up a level

[Shuah Khan]

On 08/22/2018 12:45 AM, Ido Schimmel wrote:
> On Tue, Aug 21, 2018@01:41:54PM -0600, Shuah Khan wrote:
>> On 08/21/2018 12:56 PM, Ido Schimmel wrote:
>>> On Tue, Aug 21, 2018@06:12:12PM +0200, Anders Roxell wrote:
>>>> 'make kselftest-merge' assumes that the config files for the tests are
>>>> located under the 'main' tet dir, like tools/testing/selftests/net/ and
>>>> not in a subdir to net.
>>>
>>> The tests under tools/testing/selftests/net/forwarding/ aren't executed
>>> as part of the Makefile. The config file is there mainly so that people
>>> will know which config options they need in order to run the tests.
>>>
>>> The tests can be added to the Makefile, but some of them take a few
>>> minutes to complete which is probably against "Don't take too long;"
>>> mentioned in Documentation/dev-tools/kselftest.rst.
>>>
>>
>> I don't see any reason why these shouldn't be added. With the number of
>> tests that get run by default, time has gone up. The goal is to run more
>> tests not less. There are some stress/destructive tests that continue to
>> be left out of the Makefile.
> 
> Thanks for clarifying. I'll add the tests.
> 

Great. This change to move config up one level looks good to me. Dave takes net
selftest patches through net tree usually. So I will leave this up to take it
through his process.

Acked-by: Shuah Khan (Samsung OSG) <shuah at kernel.org>

thanks,
-- Shuah