[PATCH 4/6] clk: mvebu: ap806: Fix clock name for the cluster

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Actually, the clocks exposed for the cluster are not the CPU clocks, but
the PLL clock used as entry clock for the CPU clocks. The CPU clock will
be managed by a driver submitting in the following patches.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/clk/mvebu/ap806-system-controller.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mvebu/ap806-system-controller.c b/drivers/clk/mvebu/ap806-system-controller.c
index 0a58824ff053..73ba8fd7860f 100644
--- a/drivers/clk/mvebu/ap806-system-controller.c
+++ b/drivers/clk/mvebu/ap806-system-controller.c
@@ -97,7 +97,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	cpuclk_freq *= 1000 * 1000;
 
 	/* CPU clocks depend on the Sample At Reset configuration */
-	name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-0");
+	name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-0");
 	ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
 						0, cpuclk_freq);
 	if (IS_ERR(ap806_clks[0])) {
@@ -105,7 +105,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 		goto fail0;
 	}
 
-	name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-1");
+	name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-1");
 	ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
 						cpuclk_freq);
 	if (IS_ERR(ap806_clks[1])) {
-- 
2.19.0