From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 14/14] mips: mt76xx: linkit-smart-7688: Misc updates to dts/config/defconfig
Date: Tue, 9 Oct 2018 08:59:16 +0200 [thread overview]
Message-ID: <20181009065916.31977-14-sr@denx.de> (raw)
In-Reply-To: <20181009065916.31977-1-sr@denx.de>
These misc updates include the following changes:
- Change baudrate from 57600 to 115200
- Enable MIPS_BOOT_CMDLINE_LEGACY
- Enable FIT support
- Enable ethernet support
- Enable SPI support
- Enable GPIO support
- Change max image size from 0x40000 to 0x80000
A note about the baudrate change:
The original Mediatek U-Boot version used 57600 baud. Lets move to a
more common and faster speed of 115200 baud. And remove the "console="
property from the DT as its not needed.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
arch/mips/dts/linkit-smart-7688.dts | 1 -
configs/linkit-smart-7688-ram_defconfig | 22 +++++++++++++++-------
configs/linkit-smart-7688_defconfig | 22 +++++++++++++++-------
include/configs/linkit-smart-7688.h | 2 +-
4 files changed, 31 insertions(+), 16 deletions(-)
diff --git a/arch/mips/dts/linkit-smart-7688.dts b/arch/mips/dts/linkit-smart-7688.dts
index df4bf907c6..c9db136f30 100644
--- a/arch/mips/dts/linkit-smart-7688.dts
+++ b/arch/mips/dts/linkit-smart-7688.dts
@@ -22,7 +22,6 @@
};
chosen {
- bootargs = "console=ttyS0,57600";
stdout-path = &uart2;
};
};
diff --git a/configs/linkit-smart-7688-ram_defconfig b/configs/linkit-smart-7688-ram_defconfig
index 77cd1c1575..bca7449971 100644
--- a/configs/linkit-smart-7688-ram_defconfig
+++ b/configs/linkit-smart-7688-ram_defconfig
@@ -1,35 +1,38 @@
CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x80010000
CONFIG_ARCH_MT7620=y
-# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+CONFIG_BOARD_LINKIT_SMART_7688=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_IMAGE_FORMAT_LEGACY=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
-CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
-# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
-# CONFIG_CMD_NET is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_OF_EMBED=y
CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_HAVE_BLOCK_DEVICE=y
CONFIG_CLK=y
-CONFIG_CPU=y
-CONFIG_DM_GPIO=y
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
@@ -40,12 +43,17 @@ CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_FIXED=y
+CONFIG_MT76XX_ETH=y
CONFIG_PHY=y
CONFIG_POWER_DOMAIN=y
CONFIG_RAM=y
CONFIG_DM_RESET=y
-CONFIG_BAUDRATE=57600
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
+CONFIG_MT7621_SPI=y
CONFIG_SYSRESET_SYSCON=y
+CONFIG_LZMA=y
+CONFIG_LZO=y
diff --git a/configs/linkit-smart-7688_defconfig b/configs/linkit-smart-7688_defconfig
index 62cdda1e0a..4435b06fba 100644
--- a/configs/linkit-smart-7688_defconfig
+++ b/configs/linkit-smart-7688_defconfig
@@ -1,39 +1,42 @@
CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x9c000000
CONFIG_ARCH_MT7620=y
+CONFIG_BOARD_LINKIT_SMART_7688=y
CONFIG_BOOT_ROM=y
CONFIG_ONBOARD_DDR2_SIZE_1024MBIT=y
CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT=y
-# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_IMAGE_FORMAT_LEGACY=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
-CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
-# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
-# CONFIG_CMD_NET is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_OF_EMBED=y
CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_HAVE_BLOCK_DEVICE=y
CONFIG_CLK=y
-CONFIG_CPU=y
-CONFIG_DM_GPIO=y
CONFIG_LED=y
CONFIG_LED_BLINK=y
CONFIG_LED_GPIO=y
@@ -44,12 +47,17 @@ CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_FIXED=y
+CONFIG_MT76XX_ETH=y
CONFIG_PHY=y
CONFIG_POWER_DOMAIN=y
CONFIG_RAM=y
CONFIG_DM_RESET=y
-CONFIG_BAUDRATE=57600
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
+CONFIG_MT7621_SPI=y
CONFIG_SYSRESET_SYSCON=y
+CONFIG_LZMA=y
+CONFIG_LZO=y
diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h
index 78efa23279..3bae92d0ee 100644
--- a/include/configs/linkit-smart-7688.h
+++ b/include/configs/linkit-smart-7688.h
@@ -38,7 +38,7 @@
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/* Environment settings */
-#define CONFIG_ENV_OFFSET 0x40000
+#define CONFIG_ENV_OFFSET 0x80000
#define CONFIG_ENV_SIZE (16 << 10)
#define CONFIG_ENV_SECT_SIZE (64 << 10)
--
2.19.1
next prev parent reply other threads:[~2018-10-09 6:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-09 6:59 [U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 02/14] mips: mt76xx: lowlevel_init.S: Add missing memory controller reset in DDR init Stefan Roese
2018-10-28 19:42 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 03/14] mips: mt76xx: Enable SYS_MIPS_CACHE_INIT_RAM_LOAD for cache init Stefan Roese
2018-10-28 19:02 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 04/14] mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Stefan Roese
2018-10-28 19:43 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 05/14] mips: mt76xx: Add GPIO DT nodes " Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 06/14] mips: mt76xx: Add watchdog DT node " Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 07/14] mips: mt76xx: Kconfig: Add ethernet and GPIO support Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 08/14] mips: mt76xx: Enable watchdog support Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 09/14] mips: mt76xx: gardena-smart-gateway: Configure GPIOs (digital vs analog) Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 10/14] mips: mt76xx: gardena-smart-gateway: Add LEDs to dts Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 11/14] mips: mt76xx: gardena-smart-gateway: Add board_late_init() to set LED def state Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 12/14] mips: mt76xx: gardena-smart-gateway: Misc updates to dts/config/defconfig Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 13/14] mips: mt76xx: linkit-smart-7688: Use ioremap_nocache to get address Stefan Roese
2018-10-09 6:59 ` Stefan Roese [this message]
2018-10-09 17:38 ` [U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Anatolij Gustschin
2018-10-10 5:57 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181009065916.31977-14-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.