From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/14] mips: mt76xx: gardena-smart-gateway: Configure GPIOs (digital vs analog)
Date: Tue, 9 Oct 2018 08:59:11 +0200 [thread overview]
Message-ID: <20181009065916.31977-9-sr@denx.de> (raw)
In-Reply-To: <20181009065916.31977-1-sr@denx.de>
Configure digital vs analog GPIOs as needed on this board.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
board/gardena/smart-gateway-mt7688/board.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/board/gardena/smart-gateway-mt7688/board.c b/board/gardena/smart-gateway-mt7688/board.c
index 5ff546f505..838dfc205b 100644
--- a/board/gardena/smart-gateway-mt7688/board.c
+++ b/board/gardena/smart-gateway-mt7688/board.c
@@ -4,14 +4,17 @@
*/
#include <common.h>
-#include <asm/io.h>
+#include <linux/io.h>
+
+#define MT76XX_AGPIO_CFG 0x1000003c
int board_early_init_f(void)
{
- /*
- * Nothing to be done here for this board (no UART setup etc)
- * right now. We might need some pin muxing, so lets keep this
- * function for now.
- */
+ void __iomem *gpio_mode;
+
+ /* Configure digital vs analog GPIOs */
+ gpio_mode = ioremap_nocache(MT76XX_AGPIO_CFG, 0x100);
+ iowrite32(0x00fe01ff, gpio_mode);
+
return 0;
}
--
2.19.1
next prev parent reply other threads:[~2018-10-09 6:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-09 6:59 [U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 02/14] mips: mt76xx: lowlevel_init.S: Add missing memory controller reset in DDR init Stefan Roese
2018-10-28 19:42 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 03/14] mips: mt76xx: Enable SYS_MIPS_CACHE_INIT_RAM_LOAD for cache init Stefan Roese
2018-10-28 19:02 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 04/14] mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Stefan Roese
2018-10-28 19:43 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 05/14] mips: mt76xx: Add GPIO DT nodes " Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 06/14] mips: mt76xx: Add watchdog DT node " Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 07/14] mips: mt76xx: Kconfig: Add ethernet and GPIO support Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 08/14] mips: mt76xx: Enable watchdog support Stefan Roese
2018-10-09 6:59 ` Stefan Roese [this message]
2018-10-09 6:59 ` [U-Boot] [PATCH 10/14] mips: mt76xx: gardena-smart-gateway: Add LEDs to dts Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 11/14] mips: mt76xx: gardena-smart-gateway: Add board_late_init() to set LED def state Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 12/14] mips: mt76xx: gardena-smart-gateway: Misc updates to dts/config/defconfig Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 13/14] mips: mt76xx: linkit-smart-7688: Use ioremap_nocache to get address Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 14/14] mips: mt76xx: linkit-smart-7688: Misc updates to dts/config/defconfig Stefan Roese
2018-10-09 17:38 ` [U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Anatolij Gustschin
2018-10-10 5:57 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181009065916.31977-9-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.