From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 03/14] mips: mt76xx: Enable SYS_MIPS_CACHE_INIT_RAM_LOAD for cache init
Date: Sun, 28 Oct 2018 20:02:28 +0100 [thread overview]
Message-ID: <32b2bb17-cfe5-8319-c240-d65108183abc@gmail.com> (raw)
In-Reply-To: <20181009065916.31977-3-sr@denx.de>
Am 09.10.18 um 08:59 schrieb Stefan Roese:
> Using CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD should ensure that the cache
> is initialized correctly (parity etc). Even though some issues are
> still seen on the linkit and gardena MT7688 platforms, which could
> be a result of a non-optimal cache configuration / setup.
I thought this doesn't really help? Also if you can't move
CONFIG_MIPS_CACHE_INDEX_BASE to some SRAM space, you need to run your
memory init code before the cache initialisation to have working DRAM
available. But this slows down the boot time.
>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
> ---
> arch/mips/mach-mt7620/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/mips/mach-mt7620/Kconfig b/arch/mips/mach-mt7620/Kconfig
> index 13a7bd2cc0..e42d918ba0 100644
> --- a/arch/mips/mach-mt7620/Kconfig
> +++ b/arch/mips/mach-mt7620/Kconfig
> @@ -13,6 +13,7 @@ choice
> config SOC_MT7620
> bool "MT7620/8"
> select MIPS_L1_CACHE_SHIFT_5
> + select SYS_MIPS_CACHE_INIT_RAM_LOAD
> help
> This supports MediaTek MIPS MT7620 family.
>
>
--
- Daniel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181028/9100d071/attachment.sig>
next prev parent reply other threads:[~2018-10-28 19:02 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-09 6:59 [U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 02/14] mips: mt76xx: lowlevel_init.S: Add missing memory controller reset in DDR init Stefan Roese
2018-10-28 19:42 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 03/14] mips: mt76xx: Enable SYS_MIPS_CACHE_INIT_RAM_LOAD for cache init Stefan Roese
2018-10-28 19:02 ` Daniel Schwierzeck [this message]
2018-10-09 6:59 ` [U-Boot] [PATCH 04/14] mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Stefan Roese
2018-10-28 19:43 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 05/14] mips: mt76xx: Add GPIO DT nodes " Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 06/14] mips: mt76xx: Add watchdog DT node " Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 07/14] mips: mt76xx: Kconfig: Add ethernet and GPIO support Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 08/14] mips: mt76xx: Enable watchdog support Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 09/14] mips: mt76xx: gardena-smart-gateway: Configure GPIOs (digital vs analog) Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 10/14] mips: mt76xx: gardena-smart-gateway: Add LEDs to dts Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 11/14] mips: mt76xx: gardena-smart-gateway: Add board_late_init() to set LED def state Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 12/14] mips: mt76xx: gardena-smart-gateway: Misc updates to dts/config/defconfig Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 13/14] mips: mt76xx: linkit-smart-7688: Use ioremap_nocache to get address Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 14/14] mips: mt76xx: linkit-smart-7688: Misc updates to dts/config/defconfig Stefan Roese
2018-10-09 17:38 ` [U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Anatolij Gustschin
2018-10-10 5:57 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32b2bb17-cfe5-8319-c240-d65108183abc@gmail.com \
--to=daniel.schwierzeck@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.