* [U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
2018-10-10 5:49 ` Jagan Teki
2018-10-09 21:43 ` [U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option Angelo Dureghello
` (9 subsequent siblings)
10 siblings, 1 reply; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
This patch adds a basic group of devicetrees, one for each
cpu family, including actually just uart and dspi devices,
since these are the drivers supporting devicetree (support
added in this patch-set).
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- add mcf54xx.dtsi and mcf537x.dtsi
---
arch/m68k/dts/mcf5208.dtsi | 36 ++++++++
arch/m68k/dts/mcf5227x.dtsi | 48 ++++++++++
arch/m68k/dts/mcf523x.dtsi | 44 ++++++++++
arch/m68k/dts/mcf5249.dtsi | 38 ++++++++
arch/m68k/dts/mcf5253.dtsi | 44 ++++++++++
arch/m68k/dts/mcf5271.dtsi | 44 ++++++++++
arch/m68k/dts/mcf5272.dtsi | 38 ++++++++
arch/m68k/dts/mcf5275.dtsi | 44 ++++++++++
arch/m68k/dts/mcf5282.dtsi | 44 ++++++++++
arch/m68k/dts/mcf5301x.dtsi | 48 ++++++++++
arch/m68k/dts/mcf5307.dtsi | 39 +++++++++
arch/m68k/dts/mcf5329.dtsi | 36 ++++++++
arch/m68k/dts/mcf537x.dtsi | 36 ++++++++
arch/m68k/dts/mcf5441x.dtsi | 87 +++++++++++++++++++
arch/m68k/dts/mcf5445x.dtsi | 48 ++++++++++
arch/m68k/dts/mcf54xx.dtsi | 40 +++++++++
doc/device-tree-bindings/serial/mcf-uart.txt | 19 ++++
doc/device-tree-bindings/spi/spi-mcf-dspi.txt | 30 +++++++
18 files changed, 763 insertions(+)
create mode 100644 arch/m68k/dts/mcf5208.dtsi
create mode 100644 arch/m68k/dts/mcf5227x.dtsi
create mode 100644 arch/m68k/dts/mcf523x.dtsi
create mode 100644 arch/m68k/dts/mcf5249.dtsi
create mode 100644 arch/m68k/dts/mcf5253.dtsi
create mode 100644 arch/m68k/dts/mcf5271.dtsi
create mode 100644 arch/m68k/dts/mcf5272.dtsi
create mode 100644 arch/m68k/dts/mcf5275.dtsi
create mode 100644 arch/m68k/dts/mcf5282.dtsi
create mode 100644 arch/m68k/dts/mcf5301x.dtsi
create mode 100644 arch/m68k/dts/mcf5307.dtsi
create mode 100644 arch/m68k/dts/mcf5329.dtsi
create mode 100644 arch/m68k/dts/mcf537x.dtsi
create mode 100644 arch/m68k/dts/mcf5441x.dtsi
create mode 100644 arch/m68k/dts/mcf5445x.dtsi
create mode 100644 arch/m68k/dts/mcf54xx.dtsi
create mode 100644 doc/device-tree-bindings/serial/mcf-uart.txt
create mode 100644 doc/device-tree-bindings/spi/spi-mcf-dspi.txt
diff --git a/arch/m68k/dts/mcf5208.dtsi b/arch/m68k/dts/mcf5208.dtsi
new file mode 100644
index 0000000000..558d8bf41a
--- /dev/null
+++ b/arch/m68k/dts/mcf5208.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5208";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5227x.dtsi b/arch/m68k/dts/mcf5227x.dtsi
new file mode 100644
index 0000000000..8c95edddb6
--- /dev/null
+++ b/arch/m68k/dts/mcf5227x.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5227x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi at fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf523x.dtsi b/arch/m68k/dts/mcf523x.dtsi
new file mode 100644
index 0000000000..9e79d472ec
--- /dev/null
+++ b/arch/m68k/dts/mcf523x.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf523x";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar at 4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at 280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5249.dtsi b/arch/m68k/dts/mcf5249.dtsi
new file mode 100644
index 0000000000..248b3dc68b
--- /dev/null
+++ b/arch/m68k/dts/mcf5249.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5249";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar at 10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart at 1c0 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x1c0 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5253.dtsi b/arch/m68k/dts/mcf5253.dtsi
new file mode 100644
index 0000000000..3bde2d6202
--- /dev/null
+++ b/arch/m68k/dts/mcf5253.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5253";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar at 10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart at 1c0 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x1c0 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart3: uart at c00 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xc00 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5271.dtsi b/arch/m68k/dts/mcf5271.dtsi
new file mode 100644
index 0000000000..29355528d0
--- /dev/null
+++ b/arch/m68k/dts/mcf5271.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5271";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar at 4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at 280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5272.dtsi b/arch/m68k/dts/mcf5272.dtsi
new file mode 100644
index 0000000000..a56117728b
--- /dev/null
+++ b/arch/m68k/dts/mcf5272.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5272";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar at 10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart at 100 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x100 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 140 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x140 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5275.dtsi b/arch/m68k/dts/mcf5275.dtsi
new file mode 100644
index 0000000000..b375609d4a
--- /dev/null
+++ b/arch/m68k/dts/mcf5275.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5275";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar at 4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at 280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5282.dtsi b/arch/m68k/dts/mcf5282.dtsi
new file mode 100644
index 0000000000..3ad1be7bb5
--- /dev/null
+++ b/arch/m68k/dts/mcf5282.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5282";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ipsbar: ipsbar at 4000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40000000 0x40000000>;
+ reg = <0x40000000 0x40000000>;
+
+ uart0: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 240 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x240 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at 280 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x280 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5301x.dtsi b/arch/m68k/dts/mcf5301x.dtsi
new file mode 100644
index 0000000000..0891e4dfd5
--- /dev/null
+++ b/arch/m68k/dts/mcf5301x.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5301x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi at fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5307.dtsi b/arch/m68k/dts/mcf5307.dtsi
new file mode 100644
index 0000000000..e199cf9991
--- /dev/null
+++ b/arch/m68k/dts/mcf5307.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5307";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MBAR */
+ mbar: mbar at 10000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x10000000 0x10000>;
+ reg = <0x10000000 0x10000>;
+
+ uart0: uart at 1c0 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x1c0 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at 200 {
+ compatible = "fsl,mcf-uart";
+ reg = <0x200 0x40>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5329.dtsi b/arch/m68k/dts/mcf5329.dtsi
new file mode 100644
index 0000000000..aeaa6430af
--- /dev/null
+++ b/arch/m68k/dts/mcf5329.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5329";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf537x.dtsi b/arch/m68k/dts/mcf537x.dtsi
new file mode 100644
index 0000000000..aeaa6430af
--- /dev/null
+++ b/arch/m68k/dts/mcf537x.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5329";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5441x.dtsi b/arch/m68k/dts/mcf5441x.dtsi
new file mode 100644
index 0000000000..71b392adc3
--- /dev/null
+++ b/arch/m68k/dts/mcf5441x.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5441x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ uart3: uart at fc06c000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc06c000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi at fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+
+ dspi1: dspi at fc03c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc03c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+
+ dspi2: dspi at ec038000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xec038000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+
+ dspi3: dspi at ec03c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xec03c00 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf5445x.dtsi b/arch/m68k/dts/mcf5445x.dtsi
new file mode 100644
index 0000000000..ccbee29a6c
--- /dev/null
+++ b/arch/m68k/dts/mcf5445x.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf5445x";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+
+ uart1: uart at fc064000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc064000 0x40>;
+ status = "disabled";
+ };
+
+ uart2: uart at fc068000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc068000 0x40>;
+ status = "disabled";
+ };
+
+ dspi0: dspi at fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/m68k/dts/mcf54xx.dtsi b/arch/m68k/dts/mcf54xx.dtsi
new file mode 100644
index 0000000000..537bb424f3
--- /dev/null
+++ b/arch/m68k/dts/mcf54xx.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/ {
+ compatible = "fsl,mcf54x5";
+
+ aliases {
+ /* TO DO, clarify on serial, this SoC seems to have SPC and
+ * no UARTS.
+ */
+ spi0 = &dspi0;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mbar: mbar at 80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x80000000 0x10000>;
+ reg = <0x80000000 0x10000>;
+
+ dspi0: dspi at 8a00 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x8a00 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/doc/device-tree-bindings/serial/mcf-uart.txt b/doc/device-tree-bindings/serial/mcf-uart.txt
new file mode 100644
index 0000000000..d73f764c01
--- /dev/null
+++ b/doc/device-tree-bindings/serial/mcf-uart.txt
@@ -0,0 +1,19 @@
+Freescale ColdFire UART
+
+Required properties:
+- compatible : should be "fsl,mcf-uart"
+- reg: start address and size of the registers
+
+Example:
+
+soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart at fc060000 {
+ compatible = "fsl,mcf-uart";
+ reg = <0xfc060000 0x40>;
+ status = "disabled";
+ };
+};
diff --git a/doc/device-tree-bindings/spi/spi-mcf-dspi.txt b/doc/device-tree-bindings/spi/spi-mcf-dspi.txt
new file mode 100644
index 0000000000..860eb8ac85
--- /dev/null
+++ b/doc/device-tree-bindings/spi/spi-mcf-dspi.txt
@@ -0,0 +1,30 @@
+Freescale ColdFire DSPI controller
+
+Required properties:
+- compatible : "fsl,mcf-dspi"
+- #address-cells: <1>, as required by generic SPI binding
+- #size-cells: <0>, also as required by generic SPI binding
+- reg : offset and length of the register set for the device
+
+Optional properties:
+- spi-max-frequency : max supported spi frequency
+- num-cs : the number of the chipselect signals
+- spi-mode: spi motorola mode, 0 to 3
+- ctar-params: CTAR0 to 7 register configuration, as an array
+ of 8 integer fields for each register, where each register
+ is defined as: <fmsz, pcssck, pasc, pdt, cssck, asc, dt, br>.
+
+Example:
+
+dspi0: dspi at fc05c000 {
+ compatible = "fsl,mcf-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfc05c000 0x100>;
+ spi-max-frequency = <50000000>;
+ num-cs = <4>;
+ spi-mode = <0>;
+ ctar-fields = <7, 0, 0, 0, 0, 0, 1, 6>,
+ <7, 0, 0, 0, 0, 0, 1, 6>,
+ <7, 0, 0, 0, 0, 0, 1, 6>;
+};
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees
2018-10-09 21:43 ` [U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees Angelo Dureghello
@ 2018-10-10 5:49 ` Jagan Teki
2018-10-10 9:38 ` Angelo Dureghello
0 siblings, 1 reply; 18+ messages in thread
From: Jagan Teki @ 2018-10-10 5:49 UTC (permalink / raw)
To: u-boot
On Wed, Oct 10, 2018 at 5:09 AM Angelo Dureghello <angelo@sysam.it> wrote:
>
> This patch adds a basic group of devicetrees, one for each
> cpu family, including actually just uart and dspi devices,
> since these are the drivers supporting devicetree (support
> added in this patch-set).
I hope this is Linux DT sync? if yes better to mention the sync commit id.
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees
2018-10-10 5:49 ` Jagan Teki
@ 2018-10-10 9:38 ` Angelo Dureghello
0 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-10 9:38 UTC (permalink / raw)
To: u-boot
On Wed, Oct 10, 2018 at 11:19:26AM +0530, Jagan Teki wrote:
> On Wed, Oct 10, 2018 at 5:09 AM Angelo Dureghello <angelo@sysam.it> wrote:
> >
> > This patch adds a basic group of devicetrees, one for each
> > cpu family, including actually just uart and dspi devices,
> > since these are the drivers supporting devicetree (support
> > added in this patch-set).
>
> I hope this is Linux DT sync? if yes better to mention the sync commit id.
>
There is no linux DT support for m68k,
ColdFire uses the old style platform driver.
> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
2018-10-10 5:51 ` Jagan Teki
2018-10-09 21:43 ` [U-Boot] [PATCH v2 03/11] drivers: spi: cf_spi: migrate to DM and DT Angelo Dureghello
` (8 subsequent siblings)
10 siblings, 1 reply; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- new patch
---
drivers/spi/Kconfig | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 196767a3f6..6340453870 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -87,6 +87,12 @@ config CADENCE_QSPI
used to access the SPI NOR flash on platforms embedding this
Cadence IP core.
+config CF_SPI
+ bool "ColdFire SPI driver"
+ help
+ Enable the ColdFire SPI driver. This driver can be used on
+ some m68k SoCs.
+
config DESIGNWARE_SPI
bool "Designware SPI driver"
help
@@ -259,18 +265,18 @@ config ZYNQMP_GQSPI
endif # if DM_SPI
-config SOFT_SPI
- bool "Soft SPI driver"
- help
- Enable Soft SPI driver. This driver is to use GPIO simulate
- the SPI protocol.
-
config CF_SPI
bool "ColdFire SPI driver"
help
Enable the ColdFire SPI driver. This driver can be used on
some m68k SoCs.
+config SOFT_SPI
+ bool "Soft SPI driver"
+ help
+ Enable Soft SPI driver. This driver is to use GPIO simulate
+ the SPI protocol.
+
config FSL_ESPI
bool "Freescale eSPI driver"
help
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option
2018-10-09 21:43 ` [U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option Angelo Dureghello
@ 2018-10-10 5:51 ` Jagan Teki
2018-10-10 9:40 ` Angelo Dureghello
0 siblings, 1 reply; 18+ messages in thread
From: Jagan Teki @ 2018-10-10 5:51 UTC (permalink / raw)
To: u-boot
On Wed, Oct 10, 2018 at 11:14 AM Angelo Dureghello <angelo@sysam.it> wrote:
>
Commit message?
> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
> ---
> Changes for v2:
> - new patch
> ---
> drivers/spi/Kconfig | 18 ++++++++++++------
> 1 file changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 196767a3f6..6340453870 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -87,6 +87,12 @@ config CADENCE_QSPI
> used to access the SPI NOR flash on platforms embedding this
> Cadence IP core.
>
> +config CF_SPI
> + bool "ColdFire SPI driver"
> + help
> + Enable the ColdFire SPI driver. This driver can be used on
> + some m68k SoCs.
> +
> config DESIGNWARE_SPI
> bool "Designware SPI driver"
> help
> @@ -259,18 +265,18 @@ config ZYNQMP_GQSPI
>
> endif # if DM_SPI
>
> -config SOFT_SPI
> - bool "Soft SPI driver"
> - help
> - Enable Soft SPI driver. This driver is to use GPIO simulate
> - the SPI protocol.
> -
> config CF_SPI
> bool "ColdFire SPI driver"
> help
> Enable the ColdFire SPI driver. This driver can be used on
> some m68k SoCs.
>
> +config SOFT_SPI
> + bool "Soft SPI driver"
> + help
> + Enable Soft SPI driver. This driver is to use GPIO simulate
> + the SPI protocol.
> +
Why this move?
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option
2018-10-10 5:51 ` Jagan Teki
@ 2018-10-10 9:40 ` Angelo Dureghello
0 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-10 9:40 UTC (permalink / raw)
To: u-boot
On Wed, Oct 10, 2018 at 11:21:45AM +0530, Jagan Teki wrote:
> On Wed, Oct 10, 2018 at 11:14 AM Angelo Dureghello <angelo@sysam.it> wrote:
> >
>
> Commit message?
>
Ok, will add it, v3 in short.
> > Signed-off-by: Angelo Dureghello <angelo@sysam.it>
> > ---
> > Changes for v2:
> > - new patch
> > ---
> > drivers/spi/Kconfig | 18 ++++++++++++------
> > 1 file changed, 12 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> > index 196767a3f6..6340453870 100644
> > --- a/drivers/spi/Kconfig
> > +++ b/drivers/spi/Kconfig
> > @@ -87,6 +87,12 @@ config CADENCE_QSPI
> > used to access the SPI NOR flash on platforms embedding this
> > Cadence IP core.
> >
> > +config CF_SPI
> > + bool "ColdFire SPI driver"
> > + help
> > + Enable the ColdFire SPI driver. This driver can be used on
> > + some m68k SoCs.
> > +
> > config DESIGNWARE_SPI
> > bool "Designware SPI driver"
> > help
> > @@ -259,18 +265,18 @@ config ZYNQMP_GQSPI
> >
> > endif # if DM_SPI
> >
> > -config SOFT_SPI
> > - bool "Soft SPI driver"
> > - help
> > - Enable Soft SPI driver. This driver is to use GPIO simulate
> > - the SPI protocol.
> > -
> > config CF_SPI
> > bool "ColdFire SPI driver"
> > help
> > Enable the ColdFire SPI driver. This driver can be used on
> > some m68k SoCs.
> >
> > +config SOFT_SPI
> > + bool "Soft SPI driver"
> > + help
> > + Enable Soft SPI driver. This driver is to use GPIO simulate
> > + the SPI protocol.
> > +
>
> Why this move?
Kconfig must keep alphabetical order.
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v2 03/11] drivers: spi: cf_spi: migrate to DM and DT
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 01/11] m68k: add basic set of devicetrees Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
2018-10-10 5:58 ` Jagan Teki
2018-10-09 21:43 ` [U-Boot] [PATCH v2 04/11] drivers: serial: mcfuart: add DT support Angelo Dureghello
` (7 subsequent siblings)
10 siblings, 1 reply; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
Adding DM and DT support and removing old non-DM code.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- removed non DM code part
- add default setup of CTAR registers
- add DT CTAR register setup support
---
drivers/spi/cf_spi.c | 510 +++++++++++++++---------
include/dm/platform_data/spi_coldfire.h | 29 ++
2 files changed, 346 insertions(+), 193 deletions(-)
create mode 100644 include/dm/platform_data/spi_coldfire.h
diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c
index 522631cbbf..55e2c9d7b7 100644
--- a/drivers/spi/cf_spi.c
+++ b/drivers/spi/cf_spi.c
@@ -6,16 +6,28 @@
*
* Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew at freescale.com)
+ *
+ * Support for DM and DT, non-DM code removed.
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ *
+ * TODO: fsl_dspi.c should work as a driver for the DSPI module.
*/
#include <common.h>
+#include <dm.h>
+#include <dm/platform_data/spi_coldfire.h>
#include <spi.h>
#include <malloc.h>
#include <asm/immap.h>
+#include <asm/io.h>
-struct cf_spi_slave {
+struct coldfire_spi_priv {
+#ifndef CONFIG_DM_SPI
struct spi_slave slave;
+#endif
+ struct dspi *regs;
uint baudrate;
+ int mode;
int charbit;
};
@@ -38,14 +50,30 @@ DECLARE_GLOBAL_DATA_PTR;
#define SPI_MODE_MOD 0x00200000
#define SPI_DBLRATE 0x00100000
-static inline struct cf_spi_slave *to_cf_spi_slave(struct spi_slave *slave)
-{
- return container_of(slave, struct cf_spi_slave, slave);
-}
+#define MCF_DSPI_MAX_CTAR_REGS 8
+
+/* Default values */
+#define MCF_DSPI_DEFAULT_SCK_FREQ 10000000
+#define MCF_DSPI_DEFAULT_MAX_CS 4
+#define MCF_DSPI_DEFAULT_MODE 0
-static void cfspi_init(void)
+#define MCF_DSPI_DEFAULT_CTAR (DSPI_CTAR_TRSZ(7) | \
+ DSPI_CTAR_PCSSCK_1CLK | \
+ DSPI_CTAR_PASC(0) | \
+ DSPI_CTAR_PDT(0) | \
+ DSPI_CTAR_CSSCK(0) | \
+ DSPI_CTAR_ASC(0) | \
+ DSPI_CTAR_DT(1) | \
+ DSPI_CTAR_BR(6))
+
+static void __spi_init(struct coldfire_spi_priv *cfspi)
{
- volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+ struct dspi *dspi = cfspi->regs;
+ int i;
+
+ /* Default CTARs */
+ for (i = 0; i < MCF_DSPI_MAX_CTAR_REGS; i++)
+ writel(MCF_DSPI_DEFAULT_CTAR, &dspi->ctar[i]);
cfspi_port_conf(); /* port configuration */
@@ -53,128 +81,9 @@ static void cfspi_init(void)
DSPI_MCR_CSIS5 | DSPI_MCR_CSIS4 | DSPI_MCR_CSIS3 |
DSPI_MCR_CSIS2 | DSPI_MCR_CSIS1 | DSPI_MCR_CSIS0 |
DSPI_MCR_CRXF | DSPI_MCR_CTXF;
-
- /* Default setting in platform configuration */
-#ifdef CONFIG_SYS_DSPI_CTAR0
- dspi->ctar[0] = CONFIG_SYS_DSPI_CTAR0;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR1
- dspi->ctar[1] = CONFIG_SYS_DSPI_CTAR1;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR2
- dspi->ctar[2] = CONFIG_SYS_DSPI_CTAR2;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR3
- dspi->ctar[3] = CONFIG_SYS_DSPI_CTAR3;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR4
- dspi->ctar[4] = CONFIG_SYS_DSPI_CTAR4;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR5
- dspi->ctar[5] = CONFIG_SYS_DSPI_CTAR5;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR6
- dspi->ctar[6] = CONFIG_SYS_DSPI_CTAR6;
-#endif
-#ifdef CONFIG_SYS_DSPI_CTAR7
- dspi->ctar[7] = CONFIG_SYS_DSPI_CTAR7;
-#endif
-}
-
-static void cfspi_tx(u32 ctrl, u16 data)
-{
- volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
-
- while ((dspi->sr & 0x0000F000) >= 4) ;
-
- dspi->tfr = (ctrl | data);
-}
-
-static u16 cfspi_rx(void)
-{
- volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
-
- while ((dspi->sr & 0x000000F0) == 0) ;
-
- return (dspi->rfr & 0xFFFF);
-}
-
-static int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout,
- void *din, ulong flags)
-{
- struct cf_spi_slave *cfslave = to_cf_spi_slave(slave);
- u16 *spi_rd16 = NULL, *spi_wr16 = NULL;
- u8 *spi_rd = NULL, *spi_wr = NULL;
- static u32 ctrl = 0;
- uint len = bitlen >> 3;
-
- if (cfslave->charbit == 16) {
- bitlen >>= 1;
- spi_wr16 = (u16 *) dout;
- spi_rd16 = (u16 *) din;
- } else {
- spi_wr = (u8 *) dout;
- spi_rd = (u8 *) din;
- }
-
- if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN)
- ctrl |= DSPI_TFR_CONT;
-
- ctrl = (ctrl & 0xFF000000) | ((1 << slave->cs) << 16);
-
- if (len > 1) {
- int tmp_len = len - 1;
- while (tmp_len--) {
- if (dout != NULL) {
- if (cfslave->charbit == 16)
- cfspi_tx(ctrl, *spi_wr16++);
- else
- cfspi_tx(ctrl, *spi_wr++);
- cfspi_rx();
- }
-
- if (din != NULL) {
- cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL);
- if (cfslave->charbit == 16)
- *spi_rd16++ = cfspi_rx();
- else
- *spi_rd++ = cfspi_rx();
- }
- }
-
- len = 1; /* remaining byte */
- }
-
- if ((flags & SPI_XFER_END) == SPI_XFER_END)
- ctrl &= ~DSPI_TFR_CONT;
-
- if (len) {
- if (dout != NULL) {
- if (cfslave->charbit == 16)
- cfspi_tx(ctrl, *spi_wr16);
- else
- cfspi_tx(ctrl, *spi_wr);
- cfspi_rx();
- }
-
- if (din != NULL) {
- cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL);
- if (cfslave->charbit == 16)
- *spi_rd16 = cfspi_rx();
- else
- *spi_rd = cfspi_rx();
- }
- } else {
- /* dummy read */
- cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL);
- cfspi_rx();
- }
-
- return 0;
}
-static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave,
- uint mode)
+int __spi_set_speed(struct coldfire_spi_priv *cfspi, uint bus)
{
/*
* bit definition for mode:
@@ -189,7 +98,7 @@ static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave,
* 11 - 8: Delay after transfer scaler
* 7 - 0: SPI_CPHA, SPI_CPOL, SPI_LSB_FIRST
*/
- volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+ struct dspi *dspi = cfspi->regs;
int prescaler[] = { 2, 3, 5, 7 };
int scaler[] = {
2, 4, 6, 8,
@@ -199,56 +108,38 @@ static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave,
};
int i, j, pbrcnt, brcnt, diff, tmp, dbr = 0;
int best_i, best_j, bestmatch = 0x7FFFFFFF, baud_speed;
- u32 bus_setup = 0;
+ u32 bus_setup;
+
+ /* Read current setup */
+ bus_setup = readl(&dspi->ctar[bus]);
tmp = (prescaler[3] * scaler[15]);
/* Maximum and minimum baudrate it can handle */
- if ((cfslave->baudrate > (gd->bus_clk >> 1)) ||
- (cfslave->baudrate < (gd->bus_clk / tmp))) {
+ if ((cfspi->baudrate > (gd->bus_clk >> 1)) ||
+ (cfspi->baudrate < (gd->bus_clk / tmp))) {
printf("Exceed baudrate limitation: Max %d - Min %d\n",
(int)(gd->bus_clk >> 1), (int)(gd->bus_clk / tmp));
- return NULL;
+ return -1;
}
/* Activate Double Baud when it exceed 1/4 the bus clk */
- if ((CONFIG_SYS_DSPI_CTAR0 & DSPI_CTAR_DBR) ||
- (cfslave->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) {
+ if ((bus_setup & DSPI_CTAR_DBR) ||
+ (cfspi->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) {
bus_setup |= DSPI_CTAR_DBR;
dbr = 1;
}
- if (mode & SPI_CPOL)
- bus_setup |= DSPI_CTAR_CPOL;
- if (mode & SPI_CPHA)
- bus_setup |= DSPI_CTAR_CPHA;
- if (mode & SPI_LSB_FIRST)
- bus_setup |= DSPI_CTAR_LSBFE;
-
/* Overwrite default value set in platform configuration file */
- if (mode & SPI_MODE_MOD) {
-
- if ((mode & 0xF0000000) == 0)
- bus_setup |=
- dspi->ctar[cfslave->slave.bus] & 0x78000000;
- else
- bus_setup |= ((mode & 0xF0000000) >> 1);
-
+ if (cfspi->mode & SPI_MODE_MOD) {
/*
* Check to see if it is enabled by default in platform
* config, or manual setting passed by mode parameter
*/
- if (mode & SPI_DBLRATE) {
+ if (cfspi->mode & SPI_DBLRATE) {
bus_setup |= DSPI_CTAR_DBR;
dbr = 1;
}
- bus_setup |= (mode & 0x0FC00000) >> 4; /* PSCSCK, PASC, PDT */
- bus_setup |= (mode & 0x000FFF00) >> 4; /* CSSCK, ASC, DT */
- } else
- bus_setup |= (dspi->ctar[cfslave->slave.bus] & 0x78FCFFF0);
-
- cfslave->charbit =
- ((dspi->ctar[cfslave->slave.bus] & 0x78000000) ==
- 0x78000000) ? 16 : 8;
+ }
pbrcnt = sizeof(prescaler) / sizeof(int);
brcnt = sizeof(scaler) / sizeof(int);
@@ -259,10 +150,10 @@ static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave,
for (j = 0; j < brcnt; j++) {
tmp = (baud_speed / scaler[j]) * (1 + dbr);
- if (tmp > cfslave->baudrate)
- diff = tmp - cfslave->baudrate;
+ if (tmp > cfspi->baudrate)
+ diff = tmp - cfspi->baudrate;
else
- diff = cfslave->baudrate - tmp;
+ diff = cfspi->baudrate - tmp;
if (diff < bestmatch) {
bestmatch = diff;
@@ -271,65 +162,298 @@ static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave,
}
}
}
+
+ bus_setup &= ~(DSPI_CTAR_PBR(0x03) | DSPI_CTAR_BR(0x0f));
bus_setup |= (DSPI_CTAR_PBR(best_i) | DSPI_CTAR_BR(best_j));
- dspi->ctar[cfslave->slave.bus] = bus_setup;
+ writel(bus_setup, &dspi->ctar[bus]);
- return &cfslave->slave;
+ return 0;
}
-#endif /* CONFIG_CF_DSPI */
-#ifdef CONFIG_CMD_SPI
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+static int __spi_set_mode(struct coldfire_spi_priv *cfspi, uint bus)
{
- if (((cs >= 0) && (cs < 8)) && ((bus >= 0) && (bus < 8)))
- return 1;
- else
- return 0;
+ struct dspi *dspi = cfspi->regs;
+ u32 bus_setup = 0;
+
+ if (cfspi->mode & SPI_CPOL)
+ bus_setup |= DSPI_CTAR_CPOL;
+ if (cfspi->mode & SPI_CPHA)
+ bus_setup |= DSPI_CTAR_CPHA;
+ if (cfspi->mode & SPI_LSB_FIRST)
+ bus_setup |= DSPI_CTAR_LSBFE;
+
+ /* Overwrite default value set in platform configuration file */
+ if (cfspi->mode & SPI_MODE_MOD) {
+ if ((cfspi->mode & 0xF0000000) == 0)
+ bus_setup |=
+ readl(&dspi->ctar[bus]) & 0x78000000;
+ else
+ bus_setup |= ((cfspi->mode & 0xF0000000) >> 1);
+
+ /* PSCSCK, PASC, PDT */
+ bus_setup |= (cfspi->mode & 0x0FC00000) >> 4;
+ /* CSSCK, ASC, DT */
+ bus_setup |= (cfspi->mode & 0x000FFF00) >> 4;
+ } else {
+ bus_setup |= (readl(&dspi->ctar[bus]) & 0x78FCFFF0);
+ }
+
+ cfspi->charbit =
+ ((readl(&dspi->ctar[bus]) & 0x78000000) == 0x78000000) ? 16 : 8;
+
+ setbits_be32(&dspi->ctar[bus], bus_setup);
+
+ return 0;
+}
+
+static inline void __cfspi_tx(struct coldfire_spi_priv *cfspi,
+ u32 ctrl, u16 data)
+{
+ while ((readl(&cfspi->regs->sr) & 0x0000F000) >= 4)
+ ;
+
+ writel(ctrl | data, &cfspi->regs->tfr);
+}
+
+static inline u16 __cfspi_rx(struct coldfire_spi_priv *cfspi)
+{
+ while ((readl(&cfspi->regs->sr) & 0x000000F0) == 0)
+ ;
+
+ return readw(&cfspi->regs->rfr);
+}
+
+static int __spi_xfer(struct coldfire_spi_priv *cfspi, uint cs, uint bitlen,
+ const void *dout, void *din, ulong flags)
+{
+ u16 *spi_rd16 = NULL, *spi_wr16 = NULL;
+ u8 *spi_rd = NULL, *spi_wr = NULL;
+ static u32 ctrl;
+ uint len = bitlen >> 3;
+
+ if (cfspi->charbit == 16) {
+ bitlen >>= 1;
+ spi_wr16 = (u16 *)dout;
+ spi_rd16 = (u16 *)din;
+ } else {
+ spi_wr = (u8 *)dout;
+ spi_rd = (u8 *)din;
+ }
+
+ if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN)
+ ctrl |= DSPI_TFR_CONT;
+
+ ctrl = (ctrl & 0xFF000000) | ((1 << cs) << 16);
+
+ if (len > 1) {
+ int tmp_len = len - 1;
+
+ while (tmp_len--) {
+ if (dout) {
+ if (cfspi->charbit == 16)
+ __cfspi_tx(cfspi, ctrl, *spi_wr16++);
+ else
+ __cfspi_tx(cfspi, ctrl, *spi_wr++);
+ __cfspi_rx(cfspi);
+ }
+
+ if (din) {
+ __cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL);
+ if (cfspi->charbit == 16)
+ *spi_rd16++ = __cfspi_rx(cfspi);
+ else
+ *spi_rd++ = __cfspi_rx(cfspi);
+ }
+ }
+
+ len = 1; /* remaining byte */
+ }
+
+ if ((flags & SPI_XFER_END) == SPI_XFER_END)
+ ctrl &= ~DSPI_TFR_CONT;
+
+ if (len) {
+ if (dout) {
+ if (cfspi->charbit == 16)
+ __cfspi_tx(cfspi, ctrl, *spi_wr16);
+ else
+ __cfspi_tx(cfspi, ctrl, *spi_wr);
+ __cfspi_rx(cfspi);
+ }
+
+ if (din) {
+ __cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL);
+ if (cfspi->charbit == 16)
+ *spi_rd16 = __cfspi_rx(cfspi);
+ else
+ *spi_rd = __cfspi_rx(cfspi);
+ }
+ } else {
+ /* dummy read */
+ __cfspi_tx(cfspi, ctrl, CONFIG_SPI_IDLE_VAL);
+ __cfspi_rx(cfspi);
+ }
+
+ return 0;
}
void spi_init(void)
{
- cfspi_init();
}
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
+static int coldfire_spi_claim_bus(struct udevice *dev)
{
- struct cf_spi_slave *cfslave;
+ struct udevice *bus = dev->parent;
+ struct dm_spi_slave_platdata *slave_plat =
+ dev_get_parent_platdata(dev);
- if (!spi_cs_is_valid(bus, cs))
- return NULL;
+ return cfspi_claim_bus(bus->seq, slave_plat->cs);
+}
- cfslave = spi_alloc_slave(struct cf_spi_slave, bus, cs);
- if (!cfslave)
- return NULL;
+static int coldfire_spi_release_bus(struct udevice *dev)
+{
+ struct udevice *bus = dev->parent;
+ struct dm_spi_slave_platdata *slave_plat =
+ dev_get_parent_platdata(dev);
- cfslave->baudrate = max_hz;
+ cfspi_release_bus(bus->seq, slave_plat->cs);
- /* specific setup */
- return cfspi_setup_slave(cfslave, mode);
+ return 0;
}
-void spi_free_slave(struct spi_slave *slave)
+static int coldfire_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din,
+ unsigned long flags)
{
- struct cf_spi_slave *cfslave = to_cf_spi_slave(slave);
+ struct udevice *bus = dev_get_parent(dev);
+ struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
- free(cfslave);
+ return __spi_xfer(cfspi, slave_plat->cs, bitlen, dout, din, flags);
}
-int spi_claim_bus(struct spi_slave *slave)
+static int coldfire_spi_set_speed(struct udevice *bus, uint max_hz)
{
- return cfspi_claim_bus(slave->bus, slave->cs);
+ struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
+
+ cfspi->baudrate = max_hz;
+
+ return __spi_set_speed(cfspi, bus->seq);
}
-void spi_release_bus(struct spi_slave *slave)
+static int coldfire_spi_set_mode(struct udevice *bus, uint mode)
{
- cfspi_release_bus(slave->bus, slave->cs);
+ struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
+
+ cfspi->mode = mode;
+
+ return __spi_set_mode(cfspi, bus->seq);
}
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
- void *din, unsigned long flags)
+static int coldfire_spi_probe(struct udevice *bus)
{
- return cfspi_xfer(slave, bitlen, dout, din, flags);
+ struct coldfire_spi_platdata *plat = dev_get_platdata(bus);
+ struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
+ int i;
+
+ cfspi->regs = (struct dspi *)plat->regs_addr;
+
+ cfspi->baudrate = plat->speed_hz;
+ cfspi->mode = plat->mode;
+
+ for (i = 0; i < MCF_DSPI_MAX_CTAR_REGS; i++) {
+ unsigned int ctar = 0;
+
+ if (plat->ctar[i][0] == 0)
+ break;
+
+ ctar = DSPI_CTAR_TRSZ(plat->ctar[i][0]) |
+ DSPI_CTAR_PCSSCK(plat->ctar[i][1]) |
+ DSPI_CTAR_PASC(plat->ctar[i][2]) |
+ DSPI_CTAR_PDT(plat->ctar[i][3]) |
+ DSPI_CTAR_CSSCK(plat->ctar[i][4]) |
+ DSPI_CTAR_ASC(plat->ctar[i][5]) |
+ DSPI_CTAR_DT(plat->ctar[i][6]) |
+ DSPI_CTAR_BR(plat->ctar[i][7]);
+
+ writel(ctar, &cfspi->regs->ctar[i]);
+ }
+
+ __spi_init(cfspi);
+
+ return 0;
}
-#endif /* CONFIG_CMD_SPI */
+
+static int coldfire_dspi_ofdata_to_platdata(struct udevice *bus)
+{
+ fdt_addr_t addr;
+ struct coldfire_spi_platdata *plat = bus->platdata;
+ const void *blob = gd->fdt_blob;
+ int node = dev_of_offset(bus);
+ int *ctar, len;
+
+ addr = devfdt_get_addr(bus);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("DSPI: Can't get base address or size\n");
+ return -ENOMEM;
+ }
+ plat->regs_addr = addr;
+
+ plat->num_cs = fdtdec_get_int(blob, node, "num-cs",
+ MCF_DSPI_DEFAULT_MAX_CS);
+
+ plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
+ MCF_DSPI_DEFAULT_SCK_FREQ);
+
+ plat->mode = fdtdec_get_int(blob, node, "spi-mode",
+ MCF_DSPI_DEFAULT_MODE);
+
+ memset(plat->ctar, 0, sizeof(plat->ctar));
+
+ ctar = (int *)fdt_getprop(blob, node, "ctar-params", &len);
+
+ if (ctar && len) {
+ int i, q, ctar_regs;
+
+ ctar_regs = len / sizeof(unsigned int) / MAX_CTAR_FIELDS;
+
+ if (ctar_regs > MAX_CTAR_REGS)
+ ctar_regs = MAX_CTAR_REGS;
+
+ for (i = 0; i < ctar_regs; i++) {
+ for (q = 0; q < MAX_CTAR_FIELDS; q++)
+ plat->ctar[i][q] = *ctar++;
+ }
+ }
+
+ debug("DSPI: regs=%pa, max-frequency=%d, num-cs=%d, mode=%d\n",
+ (void *)plat->regs_addr,
+ plat->speed_hz, plat->num_cs, plat->mode);
+
+ return 0;
+}
+
+static const struct dm_spi_ops coldfire_spi_ops = {
+ .claim_bus = coldfire_spi_claim_bus,
+ .release_bus = coldfire_spi_release_bus,
+ .xfer = coldfire_spi_xfer,
+ .set_speed = coldfire_spi_set_speed,
+ .set_mode = coldfire_spi_set_mode,
+};
+
+static const struct udevice_id coldfire_spi_ids[] = {
+ { .compatible = "fsl,mcf-dspi" },
+ { }
+};
+
+U_BOOT_DRIVER(coldfire_spi) = {
+ .name = "spi_coldfire",
+ .id = UCLASS_SPI,
+ .of_match = coldfire_spi_ids,
+ .probe = coldfire_spi_probe,
+ .ops = &coldfire_spi_ops,
+ .platdata_auto_alloc_size = sizeof(struct coldfire_spi_platdata),
+ .ofdata_to_platdata = coldfire_dspi_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct coldfire_spi_priv),
+};
+#endif /* CONFIG_CF_DSPI */
diff --git a/include/dm/platform_data/spi_coldfire.h b/include/dm/platform_data/spi_coldfire.h
new file mode 100644
index 0000000000..8ad8eaedfd
--- /dev/null
+++ b/include/dm/platform_data/spi_coldfire.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+#ifndef __spi_coldfire_h
+#define __spi_coldfire_h
+
+#define MAX_CTAR_REGS 8
+#define MAX_CTAR_FIELDS 8
+
+/*
+ * struct coldfire_spi_platdata - information about a coldfire spi module
+ *
+ * @regs_addr: base address for module registers
+ * @speed_hz: default SCK frequency
+ * @mode: default SPI mode
+ * @num_cs: number of DSPI chipselect signals
+ */
+struct coldfire_spi_platdata {
+ fdt_addr_t regs_addr;
+ uint speed_hz;
+ uint mode;
+ uint num_cs;
+ uint ctar[MAX_CTAR_REGS][MAX_CTAR_FIELDS];
+};
+
+#endif /* __spi_coldfire_h */
+
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 03/11] drivers: spi: cf_spi: migrate to DM and DT
2018-10-09 21:43 ` [U-Boot] [PATCH v2 03/11] drivers: spi: cf_spi: migrate to DM and DT Angelo Dureghello
@ 2018-10-10 5:58 ` Jagan Teki
2018-10-10 9:57 ` Angelo Dureghello
0 siblings, 1 reply; 18+ messages in thread
From: Jagan Teki @ 2018-10-10 5:58 UTC (permalink / raw)
To: u-boot
On Wed, Oct 10, 2018 at 5:10 AM Angelo Dureghello <angelo@sysam.it> wrote:
>
> Adding DM and DT support and removing old non-DM code.
Commit head can be: spi: cf_spi: Convert to driver model
>
> Signed-off-by: Angelo Dureghello <angelo@sysam.it>
> ---
> Changes for v2:
> - removed non DM code part
> - add default setup of CTAR registers
> - add DT CTAR register setup support
> ---
> drivers/spi/cf_spi.c | 510 +++++++++++++++---------
> include/dm/platform_data/spi_coldfire.h | 29 ++
> 2 files changed, 346 insertions(+), 193 deletions(-)
> create mode 100644 include/dm/platform_data/spi_coldfire.h
>
> diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c
> index 522631cbbf..55e2c9d7b7 100644
> --- a/drivers/spi/cf_spi.c
> +++ b/drivers/spi/cf_spi.c
> @@ -6,16 +6,28 @@
> *
> * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
> * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
> + *
> + * Support for DM and DT, non-DM code removed.
> + * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
> + *
> + * TODO: fsl_dspi.c should work as a driver for the DSPI module.
what is this for?
> */
>
> #include <common.h>
> +#include <dm.h>
> +#include <dm/platform_data/spi_coldfire.h>
> #include <spi.h>
> #include <malloc.h>
> #include <asm/immap.h>
> +#include <asm/io.h>
>
> -struct cf_spi_slave {
> +struct coldfire_spi_priv {
> +#ifndef CONFIG_DM_SPI
> struct spi_slave slave;
> +#endif
do you still maintain non-dm code? if yes can't we get rid of?
> + struct dspi *regs;
> uint baudrate;
> + int mode;
> int charbit;
> };
>
> @@ -38,14 +50,30 @@ DECLARE_GLOBAL_DATA_PTR;
> #define SPI_MODE_MOD 0x00200000
> #define SPI_DBLRATE 0x00100000
>
> -static inline struct cf_spi_slave *to_cf_spi_slave(struct spi_slave *slave)
> -{
> - return container_of(slave, struct cf_spi_slave, slave);
> -}
> +#define MCF_DSPI_MAX_CTAR_REGS 8
> +
> +/* Default values */
> +#define MCF_DSPI_DEFAULT_SCK_FREQ 10000000
> +#define MCF_DSPI_DEFAULT_MAX_CS 4
> +#define MCF_DSPI_DEFAULT_MODE 0
>
> -static void cfspi_init(void)
> +#define MCF_DSPI_DEFAULT_CTAR (DSPI_CTAR_TRSZ(7) | \
> + DSPI_CTAR_PCSSCK_1CLK | \
> + DSPI_CTAR_PASC(0) | \
> + DSPI_CTAR_PDT(0) | \
> + DSPI_CTAR_CSSCK(0) | \
> + DSPI_CTAR_ASC(0) | \
[snip]
> -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
> - void *din, unsigned long flags)
> +static int coldfire_spi_probe(struct udevice *bus)
> {
> - return cfspi_xfer(slave, bitlen, dout, din, flags);
> + struct coldfire_spi_platdata *plat = dev_get_platdata(bus);
> + struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
> + int i;
> +
> + cfspi->regs = (struct dspi *)plat->regs_addr;
> +
> + cfspi->baudrate = plat->speed_hz;
> + cfspi->mode = plat->mode;
> +
> + for (i = 0; i < MCF_DSPI_MAX_CTAR_REGS; i++) {
> + unsigned int ctar = 0;
> +
> + if (plat->ctar[i][0] == 0)
> + break;
> +
> + ctar = DSPI_CTAR_TRSZ(plat->ctar[i][0]) |
> + DSPI_CTAR_PCSSCK(plat->ctar[i][1]) |
> + DSPI_CTAR_PASC(plat->ctar[i][2]) |
> + DSPI_CTAR_PDT(plat->ctar[i][3]) |
> + DSPI_CTAR_CSSCK(plat->ctar[i][4]) |
> + DSPI_CTAR_ASC(plat->ctar[i][5]) |
> + DSPI_CTAR_DT(plat->ctar[i][6]) |
> + DSPI_CTAR_BR(plat->ctar[i][7]);
> +
> + writel(ctar, &cfspi->regs->ctar[i]);
> + }
> +
> + __spi_init(cfspi);
> +
> + return 0;
> }
> -#endif /* CONFIG_CMD_SPI */
> +
> +static int coldfire_dspi_ofdata_to_platdata(struct udevice *bus)
If you want to support platdata, it shouldn't available for DT so add
ifdef for DT. See recent patches about this change.
^ permalink raw reply [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 03/11] drivers: spi: cf_spi: migrate to DM and DT
2018-10-10 5:58 ` Jagan Teki
@ 2018-10-10 9:57 ` Angelo Dureghello
0 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-10 9:57 UTC (permalink / raw)
To: u-boot
Hi Jagan,
On Wed, Oct 10, 2018 at 11:28:17AM +0530, Jagan Teki wrote:
> On Wed, Oct 10, 2018 at 5:10 AM Angelo Dureghello <angelo@sysam.it> wrote:
> >
> > Adding DM and DT support and removing old non-DM code.
>
> Commit head can be: spi: cf_spi: Convert to driver model
>
Ok, as you prefer. Will do in v3.
> >
> > Signed-off-by: Angelo Dureghello <angelo@sysam.it>
> > ---
> > Changes for v2:
> > - removed non DM code part
> > - add default setup of CTAR registers
> > - add DT CTAR register setup support
> > ---
> > drivers/spi/cf_spi.c | 510 +++++++++++++++---------
> > include/dm/platform_data/spi_coldfire.h | 29 ++
> > 2 files changed, 346 insertions(+), 193 deletions(-)
> > create mode 100644 include/dm/platform_data/spi_coldfire.h
> >
> > diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c
> > index 522631cbbf..55e2c9d7b7 100644
> > --- a/drivers/spi/cf_spi.c
> > +++ b/drivers/spi/cf_spi.c
> > @@ -6,16 +6,28 @@
> > *
> > * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
> > * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
> > + *
> > + * Support for DM and DT, non-DM code removed.
> > + * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
> > + *
> > + * TODO: fsl_dspi.c should work as a driver for the DSPI module.
>
> what is this for?
>
cf_spi.c is here for historical reasons, but may probably
be removed completely, since fsl_dspi.c is for the same
Freescale DSPI hardware module, with the minimal difference
of the FIFO size, that is raised to 16 words (from 4) in ColdFire.
If you look fsl_dspi.c you will find some CONFIG_M68K references
so this means someone already tried to use it for m68k, even if
actually still only cf_spi.c is used from the ColdFire family.
In linux i mainlined usage of fsl_dspi for ColdFire, so very likely
it is possible to use fsl_dspi and remove totally cf_spi also
in u-boot).
But this would need a further step to verify feasibility and to
test it carefully.
> > */
> >
> > #include <common.h>
> > +#include <dm.h>
> > +#include <dm/platform_data/spi_coldfire.h>
> > #include <spi.h>
> > #include <malloc.h>
> > #include <asm/immap.h>
> > +#include <asm/io.h>
> >
> > -struct cf_spi_slave {
> > +struct coldfire_spi_priv {
> > +#ifndef CONFIG_DM_SPI
> > struct spi_slave slave;
> > +#endif
>
> do you still maintain non-dm code? if yes can't we get rid of?
>
Ack, will rmeove.
> > + struct dspi *regs;
> > uint baudrate;
> > + int mode;
> > int charbit;
> > };
> >
> > @@ -38,14 +50,30 @@ DECLARE_GLOBAL_DATA_PTR;
> > #define SPI_MODE_MOD 0x00200000
> > #define SPI_DBLRATE 0x00100000
> >
> > -static inline struct cf_spi_slave *to_cf_spi_slave(struct spi_slave *slave)
> > -{
> > - return container_of(slave, struct cf_spi_slave, slave);
> > -}
> > +#define MCF_DSPI_MAX_CTAR_REGS 8
> > +
> > +/* Default values */
> > +#define MCF_DSPI_DEFAULT_SCK_FREQ 10000000
> > +#define MCF_DSPI_DEFAULT_MAX_CS 4
> > +#define MCF_DSPI_DEFAULT_MODE 0
> >
> > -static void cfspi_init(void)
> > +#define MCF_DSPI_DEFAULT_CTAR (DSPI_CTAR_TRSZ(7) | \
> > + DSPI_CTAR_PCSSCK_1CLK | \
> > + DSPI_CTAR_PASC(0) | \
> > + DSPI_CTAR_PDT(0) | \
> > + DSPI_CTAR_CSSCK(0) | \
> > + DSPI_CTAR_ASC(0) | \
>
> [snip]
>
> > -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
> > - void *din, unsigned long flags)
> > +static int coldfire_spi_probe(struct udevice *bus)
> > {
> > - return cfspi_xfer(slave, bitlen, dout, din, flags);
> > + struct coldfire_spi_platdata *plat = dev_get_platdata(bus);
> > + struct coldfire_spi_priv *cfspi = dev_get_priv(bus);
> > + int i;
> > +
> > + cfspi->regs = (struct dspi *)plat->regs_addr;
> > +
> > + cfspi->baudrate = plat->speed_hz;
> > + cfspi->mode = plat->mode;
> > +
> > + for (i = 0; i < MCF_DSPI_MAX_CTAR_REGS; i++) {
> > + unsigned int ctar = 0;
> > +
> > + if (plat->ctar[i][0] == 0)
> > + break;
> > +
> > + ctar = DSPI_CTAR_TRSZ(plat->ctar[i][0]) |
> > + DSPI_CTAR_PCSSCK(plat->ctar[i][1]) |
> > + DSPI_CTAR_PASC(plat->ctar[i][2]) |
> > + DSPI_CTAR_PDT(plat->ctar[i][3]) |
> > + DSPI_CTAR_CSSCK(plat->ctar[i][4]) |
> > + DSPI_CTAR_ASC(plat->ctar[i][5]) |
> > + DSPI_CTAR_DT(plat->ctar[i][6]) |
> > + DSPI_CTAR_BR(plat->ctar[i][7]);
> > +
> > + writel(ctar, &cfspi->regs->ctar[i]);
> > + }
> > +
> > + __spi_init(cfspi);
> > +
> > + return 0;
> > }
> > -#endif /* CONFIG_CMD_SPI */
> > +
> > +static int coldfire_dspi_ofdata_to_platdata(struct udevice *bus)
>
> If you want to support platdata, it shouldn't available for DT so add
> ifdef for DT. See recent patches about this change.
Ok, will do.
Regards,
Angelo
^ permalink raw reply [flat|nested] 18+ messages in thread
* [U-Boot] [PATCH v2 04/11] drivers: serial: mcfuart: add DT support
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
` (2 preceding siblings ...)
2018-10-09 21:43 ` [U-Boot] [PATCH v2 03/11] drivers: spi: cf_spi: migrate to DM and DT Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 05/11] drivers: serial: mcfuart: add Kconfig option Angelo Dureghello
` (6 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
This patch adds devicetree support to the mcfuart.c driver
and removes non DM code.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- remove non DM code
---
drivers/serial/mcfuart.c | 106 +++++++++++----------------------------
1 file changed, 28 insertions(+), 78 deletions(-)
diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index 1371049de2..066e5a18d8 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -5,6 +5,9 @@
*
* Modified to add device model (DM) support
* (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it>
+ *
+ * Modified to add DM and fdt support, removed non DM code
+ * (C) Copyright 2018 Angelo Dureghello <angelo@sysam.it>
*/
/*
@@ -78,83 +81,6 @@ static void mcf_serial_setbrg_common(uart_t *uart, int baudrate)
writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr);
}
-#ifndef CONFIG_DM_SERIAL
-
-static int mcf_serial_init(void)
-{
- uart_t *uart_base;
- int port_idx;
-
- uart_base = (uart_t *)CONFIG_SYS_UART_BASE;
- port_idx = CONFIG_SYS_UART_PORT;
-
- return mcf_serial_init_common(uart_base, port_idx, gd->baudrate);
-}
-
-static void mcf_serial_putc(const char c)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- if (c == '\n')
- serial_putc('\r');
-
- /* Wait for last character to go. */
- while (!(readb(&uart->usr) & UART_USR_TXRDY))
- ;
-
- writeb(c, &uart->utb);
-}
-
-static int mcf_serial_getc(void)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- /* Wait for a character to arrive. */
- while (!(readb(&uart->usr) & UART_USR_RXRDY))
- ;
-
- return readb(&uart->urb);
-}
-
-static void mcf_serial_setbrg(void)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- mcf_serial_setbrg_common(uart, gd->baudrate);
-}
-
-static int mcf_serial_tstc(void)
-{
- uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
-
- return readb(&uart->usr) & UART_USR_RXRDY;
-}
-
-static struct serial_device mcf_serial_drv = {
- .name = "mcf_serial",
- .start = mcf_serial_init,
- .stop = NULL,
- .setbrg = mcf_serial_setbrg,
- .putc = mcf_serial_putc,
- .puts = default_serial_puts,
- .getc = mcf_serial_getc,
- .tstc = mcf_serial_tstc,
-};
-
-void mcf_serial_initialize(void)
-{
- serial_register(&mcf_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &mcf_serial_drv;
-}
-
-#endif
-
-#ifdef CONFIG_DM_SERIAL
-
static int coldfire_serial_probe(struct udevice *dev)
{
struct coldfire_serial_platdata *plat = dev->platdata;
@@ -212,6 +138,23 @@ static int coldfire_serial_pending(struct udevice *dev, bool input)
return 0;
}
+static int coldfire_ofdata_to_platdata(struct udevice *dev)
+{
+ struct coldfire_serial_platdata *plat = dev_get_platdata(dev);
+ fdt_addr_t addr_base;
+
+ addr_base = devfdt_get_addr(dev);
+ if (addr_base == FDT_ADDR_T_NONE)
+ return -ENODEV;
+
+ plat->base = (uint32_t)addr_base;
+
+ plat->port = dev->seq;
+ plat->baudrate = gd->baudrate;
+
+ return 0;
+}
+
static const struct dm_serial_ops coldfire_serial_ops = {
.putc = coldfire_serial_putc,
.pending = coldfire_serial_pending,
@@ -219,11 +162,18 @@ static const struct dm_serial_ops coldfire_serial_ops = {
.setbrg = coldfire_serial_setbrg,
};
+static const struct udevice_id coldfire_serial_ids[] = {
+ { .compatible = "fsl,mcf-uart" },
+ { }
+};
+
U_BOOT_DRIVER(serial_coldfire) = {
.name = "serial_coldfire",
.id = UCLASS_SERIAL,
+ .of_match = coldfire_serial_ids,
+ .ofdata_to_platdata = coldfire_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct coldfire_serial_platdata),
.probe = coldfire_serial_probe,
.ops = &coldfire_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};
-#endif
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 05/11] drivers: serial: mcfuart: add Kconfig option
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
` (3 preceding siblings ...)
2018-10-09 21:43 ` [U-Boot] [PATCH v2 04/11] drivers: serial: mcfuart: add DT support Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 06/11] m68k: architecture changes to support fdt Angelo Dureghello
` (5 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
This patch adds missing CONFIG_MCFUART to Kconfig.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- better Kconfig help
---
drivers/serial/Kconfig | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 5fa27254e3..56dbfd5759 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -499,6 +499,15 @@ config MVEBU_A3700_UART
Choose this option to add support for UART driver on the Marvell
Armada 3700 SoC. The base address is configured via DT.
+config MCFUART
+ bool "Freescale ColdFire UART support"
+ default n
+ help
+ Choose this option to add support for UART driver on the ColdFire
+ SoC's family. The serial communication channel provides a full-duplex
+ asynchronous/synchronous receiver and transmitter deriving an
+ operating frequency from the internal bus clock or an external clock.
+
config MXC_UART
bool "IMX serial port support"
depends on MX5 || MX6
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 06/11] m68k: architecture changes to support fdt
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
` (4 preceding siblings ...)
2018-10-09 21:43 ` [U-Boot] [PATCH v2 05/11] drivers: serial: mcfuart: add Kconfig option Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 07/11] m68k: add initial dts files for all m68k boards Angelo Dureghello
` (4 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
This patch adds fdt support to the m68k architecture.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- add OF_CONTROL, DM and DM_SERIAL as default config options
for all cpu families
---
arch/Kconfig | 1 +
arch/m68k/Kconfig | 33 +++++++++++++++++++++++++++++++++
arch/m68k/cpu/u-boot.lds | 2 ++
3 files changed, 36 insertions(+)
diff --git a/arch/Kconfig b/arch/Kconfig
index c988c17f37..deb7579ae2 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -28,6 +28,7 @@ config M68K
select HAVE_PRIVATE_LIBGCC
select SYS_BOOT_GET_CMDLINE
select SYS_BOOT_GET_KBD
+ select SUPPORT_OF_CONTROL
config MICROBLAZE
bool "MicroBlaze architecture"
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 1f6df5c870..fef108105b 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -6,36 +6,69 @@ config SYS_ARCH
# processor family
config MCF520x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF52x2
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF523x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF530x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF5301x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF532x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF537x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF5441x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF5445x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF5227x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
config MCF547x_8x
+ select OF_CONTROL
+ select DM
+ select DM_SERIAL
bool
# processor type
diff --git a/arch/m68k/cpu/u-boot.lds b/arch/m68k/cpu/u-boot.lds
index 96451208e5..e61630db20 100644
--- a/arch/m68k/cpu/u-boot.lds
+++ b/arch/m68k/cpu/u-boot.lds
@@ -75,6 +75,8 @@ SECTIONS
. = ALIGN(256);
__init_end = .;
+ _end = .;
+
__bss_start = .;
.bss (NOLOAD) :
{
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 07/11] m68k: add initial dts files for all m68k boards
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
` (5 preceding siblings ...)
2018-10-09 21:43 ` [U-Boot] [PATCH v2 06/11] m68k: architecture changes to support fdt Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 08/11] m68k: enabling long jumps on mcf54x5 SoCs Angelo Dureghello
` (3 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
This patch adds basic dts files for all the m68k boards.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- new patch
---
arch/m68k/dts/M5208EVBE.dts | 22 +++++++
arch/m68k/dts/M52277EVB.dts | 25 ++++++++
arch/m68k/dts/M52277EVB_stmicro.dts | 22 +++++++
arch/m68k/dts/M5235EVB.dts | 22 +++++++
arch/m68k/dts/M5235EVB_Flash32.dts | 22 +++++++
arch/m68k/dts/M5249EVB.dts | 22 +++++++
arch/m68k/dts/M5253DEMO.dts | 22 +++++++
arch/m68k/dts/M5272C3.dts | 22 +++++++
arch/m68k/dts/M5275EVB.dts | 22 +++++++
arch/m68k/dts/M5282EVB.dts | 22 +++++++
arch/m68k/dts/M53017EVB.dts | 22 +++++++
arch/m68k/dts/M5329AFEE.dts | 22 +++++++
arch/m68k/dts/M5329BFEE.dts | 22 +++++++
arch/m68k/dts/M5373EVB.dts | 22 +++++++
arch/m68k/dts/M54418TWR.dts | 25 ++++++++
arch/m68k/dts/M54418TWR_nand_mii.dts | 25 ++++++++
arch/m68k/dts/M54418TWR_nand_rmii.dts | 25 ++++++++
arch/m68k/dts/M54418TWR_nand_rmii_lowfreq.dts | 25 ++++++++
arch/m68k/dts/M54418TWR_serial_mii.dts | 25 ++++++++
arch/m68k/dts/M54418TWR_serial_rmii.dts | 25 ++++++++
arch/m68k/dts/M54451EVB.dts | 25 ++++++++
arch/m68k/dts/M54451EVB_stmicro.dts | 25 ++++++++
arch/m68k/dts/M54455EVB.dts | 25 ++++++++
arch/m68k/dts/M54455EVB_a66.dts | 25 ++++++++
arch/m68k/dts/M54455EVB_i66.dts | 25 ++++++++
arch/m68k/dts/M54455EVB_intel.dts | 26 +++++++++
arch/m68k/dts/M54455EVB_stm33.dts | 25 ++++++++
arch/m68k/dts/M5475AFE.dts | 13 +++++
arch/m68k/dts/M5475BFE.dts | 13 +++++
arch/m68k/dts/M5475CFE.dts | 13 +++++
arch/m68k/dts/M5475DFE.dts | 13 +++++
arch/m68k/dts/M5475EFE.dts | 13 +++++
arch/m68k/dts/M5475FFE.dts | 13 +++++
arch/m68k/dts/M5475GFE.dts | 13 +++++
arch/m68k/dts/M5485AFE.dts | 17 ++++++
arch/m68k/dts/M5485BFE.dts | 17 ++++++
arch/m68k/dts/M5485CFE.dts | 17 ++++++
arch/m68k/dts/M5485DFE.dts | 17 ++++++
arch/m68k/dts/M5485EFE.dts | 17 ++++++
arch/m68k/dts/M5485FFE.dts | 17 ++++++
arch/m68k/dts/M5485GFE.dts | 17 ++++++
arch/m68k/dts/M5485HFE.dts | 17 ++++++
arch/m68k/dts/Makefile | 58 +++++++++++++++++++
arch/m68k/dts/amcore.dts | 22 +++++++
arch/m68k/dts/astro_mcf5373l.dts | 22 +++++++
arch/m68k/dts/cobra5272.dts | 22 +++++++
arch/m68k/dts/eb_cpu5282.dts | 22 +++++++
arch/m68k/dts/eb_cpu5282_internal.dts | 22 +++++++
arch/m68k/dts/stmark2.dts | 34 +++++++++++
49 files changed, 1066 insertions(+)
create mode 100644 arch/m68k/dts/M5208EVBE.dts
create mode 100644 arch/m68k/dts/M52277EVB.dts
create mode 100644 arch/m68k/dts/M52277EVB_stmicro.dts
create mode 100644 arch/m68k/dts/M5235EVB.dts
create mode 100644 arch/m68k/dts/M5235EVB_Flash32.dts
create mode 100644 arch/m68k/dts/M5249EVB.dts
create mode 100644 arch/m68k/dts/M5253DEMO.dts
create mode 100644 arch/m68k/dts/M5272C3.dts
create mode 100644 arch/m68k/dts/M5275EVB.dts
create mode 100644 arch/m68k/dts/M5282EVB.dts
create mode 100644 arch/m68k/dts/M53017EVB.dts
create mode 100644 arch/m68k/dts/M5329AFEE.dts
create mode 100644 arch/m68k/dts/M5329BFEE.dts
create mode 100644 arch/m68k/dts/M5373EVB.dts
create mode 100644 arch/m68k/dts/M54418TWR.dts
create mode 100644 arch/m68k/dts/M54418TWR_nand_mii.dts
create mode 100644 arch/m68k/dts/M54418TWR_nand_rmii.dts
create mode 100644 arch/m68k/dts/M54418TWR_nand_rmii_lowfreq.dts
create mode 100644 arch/m68k/dts/M54418TWR_serial_mii.dts
create mode 100644 arch/m68k/dts/M54418TWR_serial_rmii.dts
create mode 100644 arch/m68k/dts/M54451EVB.dts
create mode 100644 arch/m68k/dts/M54451EVB_stmicro.dts
create mode 100644 arch/m68k/dts/M54455EVB.dts
create mode 100644 arch/m68k/dts/M54455EVB_a66.dts
create mode 100644 arch/m68k/dts/M54455EVB_i66.dts
create mode 100644 arch/m68k/dts/M54455EVB_intel.dts
create mode 100644 arch/m68k/dts/M54455EVB_stm33.dts
create mode 100644 arch/m68k/dts/M5475AFE.dts
create mode 100644 arch/m68k/dts/M5475BFE.dts
create mode 100644 arch/m68k/dts/M5475CFE.dts
create mode 100644 arch/m68k/dts/M5475DFE.dts
create mode 100644 arch/m68k/dts/M5475EFE.dts
create mode 100644 arch/m68k/dts/M5475FFE.dts
create mode 100644 arch/m68k/dts/M5475GFE.dts
create mode 100644 arch/m68k/dts/M5485AFE.dts
create mode 100644 arch/m68k/dts/M5485BFE.dts
create mode 100644 arch/m68k/dts/M5485CFE.dts
create mode 100644 arch/m68k/dts/M5485DFE.dts
create mode 100644 arch/m68k/dts/M5485EFE.dts
create mode 100644 arch/m68k/dts/M5485FFE.dts
create mode 100644 arch/m68k/dts/M5485GFE.dts
create mode 100644 arch/m68k/dts/M5485HFE.dts
create mode 100644 arch/m68k/dts/Makefile
create mode 100644 arch/m68k/dts/amcore.dts
create mode 100644 arch/m68k/dts/astro_mcf5373l.dts
create mode 100644 arch/m68k/dts/cobra5272.dts
create mode 100644 arch/m68k/dts/eb_cpu5282.dts
create mode 100644 arch/m68k/dts/eb_cpu5282_internal.dts
create mode 100644 arch/m68k/dts/stmark2.dts
diff --git a/arch/m68k/dts/M5208EVBE.dts b/arch/m68k/dts/M5208EVBE.dts
new file mode 100644
index 0000000000..e78513f3b8
--- /dev/null
+++ b/arch/m68k/dts/M5208EVBE.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5208.dtsi"
+
+/ {
+ model = "Freescale M5208EVBE";
+ compatible = "fsl,M5208EVBE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M52277EVB.dts b/arch/m68k/dts/M52277EVB.dts
new file mode 100644
index 0000000000..a2210c8811
--- /dev/null
+++ b/arch/m68k/dts/M52277EVB.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5227x.dtsi"
+
+/ {
+ model = "Freescale M52277EVB";
+ compatible = "fsl,M52277EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M52277EVB_stmicro.dts b/arch/m68k/dts/M52277EVB_stmicro.dts
new file mode 100644
index 0000000000..5fd3ca5efd
--- /dev/null
+++ b/arch/m68k/dts/M52277EVB_stmicro.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5227x.dtsi"
+
+/ {
+ model = "Freescale M52277_stmicro";
+ compatible = "fsl,M52277_stmicro";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M5235EVB.dts b/arch/m68k/dts/M5235EVB.dts
new file mode 100644
index 0000000000..1a32539323
--- /dev/null
+++ b/arch/m68k/dts/M5235EVB.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf523x.dtsi"
+
+/ {
+ model = "Freescale M5235EVB";
+ compatible = "fsl,M5235EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M5235EVB_Flash32.dts b/arch/m68k/dts/M5235EVB_Flash32.dts
new file mode 100644
index 0000000000..fcbffb23f5
--- /dev/null
+++ b/arch/m68k/dts/M5235EVB_Flash32.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf523x.dtsi"
+
+/ {
+ model = "Freescale M5235EVB_Flash32";
+ compatible = "fsl,M5235EVB_Flash32";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M5249EVB.dts b/arch/m68k/dts/M5249EVB.dts
new file mode 100644
index 0000000000..b2a1be9090
--- /dev/null
+++ b/arch/m68k/dts/M5249EVB.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5249.dtsi"
+
+/ {
+ model = "Freescale M5249EVB";
+ compatible = "fsl,M5249EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M5253DEMO.dts b/arch/m68k/dts/M5253DEMO.dts
new file mode 100644
index 0000000000..7ebaa9a2e0
--- /dev/null
+++ b/arch/m68k/dts/M5253DEMO.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5253.dtsi"
+
+/ {
+ model = "Freescale M5253DEMO";
+ compatible = "fsl,M5253DEMO";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M5272C3.dts b/arch/m68k/dts/M5272C3.dts
new file mode 100644
index 0000000000..6efb8a4cc5
--- /dev/null
+++ b/arch/m68k/dts/M5272C3.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5272.dtsi"
+
+/ {
+ model = "Freescale M5272C3";
+ compatible = "fsl,M5272C3";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M5275EVB.dts b/arch/m68k/dts/M5275EVB.dts
new file mode 100644
index 0000000000..cd9eb7d145
--- /dev/null
+++ b/arch/m68k/dts/M5275EVB.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5275.dtsi"
+
+/ {
+ model = "Freescale M5275EVB";
+ compatible = "fsl,M5275EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M5282EVB.dts b/arch/m68k/dts/M5282EVB.dts
new file mode 100644
index 0000000000..9527caafc2
--- /dev/null
+++ b/arch/m68k/dts/M5282EVB.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5282.dtsi"
+
+/ {
+ model = "Freescale M5282EVB";
+ compatible = "fsl,M5282EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M53017EVB.dts b/arch/m68k/dts/M53017EVB.dts
new file mode 100644
index 0000000000..b267488e0f
--- /dev/null
+++ b/arch/m68k/dts/M53017EVB.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5301x.dtsi"
+
+/ {
+ model = "Freescale M53017EVB";
+ compatible = "fsl,M53017EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M5329AFEE.dts b/arch/m68k/dts/M5329AFEE.dts
new file mode 100644
index 0000000000..7d121d68e7
--- /dev/null
+++ b/arch/m68k/dts/M5329AFEE.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5329.dtsi"
+
+/ {
+ model = "Freescale M5329AFEE";
+ compatible = "fsl,M5329AFEE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M5329BFEE.dts b/arch/m68k/dts/M5329BFEE.dts
new file mode 100644
index 0000000000..cd087b6ea6
--- /dev/null
+++ b/arch/m68k/dts/M5329BFEE.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5329.dtsi"
+
+/ {
+ model = "Freescale M5329BFEE";
+ compatible = "fsl,M5329BFEE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M5373EVB.dts b/arch/m68k/dts/M5373EVB.dts
new file mode 100644
index 0000000000..930f911d4a
--- /dev/null
+++ b/arch/m68k/dts/M5373EVB.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf537x.dtsi"
+
+/ {
+ model = "Freescale M5373EVB";
+ compatible = "fsl,M5373EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M54418TWR.dts b/arch/m68k/dts/M54418TWR.dts
new file mode 100644
index 0000000000..7765c7abbb
--- /dev/null
+++ b/arch/m68k/dts/M54418TWR.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR";
+ compatible = "fsl,M54418TWR";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54418TWR_nand_mii.dts b/arch/m68k/dts/M54418TWR_nand_mii.dts
new file mode 100644
index 0000000000..9b1cb85325
--- /dev/null
+++ b/arch/m68k/dts/M54418TWR_nand_mii.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR_nand_mii";
+ compatible = "fsl,M54418TWR_nand_mii";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54418TWR_nand_rmii.dts b/arch/m68k/dts/M54418TWR_nand_rmii.dts
new file mode 100644
index 0000000000..824a66af48
--- /dev/null
+++ b/arch/m68k/dts/M54418TWR_nand_rmii.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR_nand_rmii";
+ compatible = "fsl,M54418TWR_nand_rmii";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54418TWR_nand_rmii_lowfreq.dts b/arch/m68k/dts/M54418TWR_nand_rmii_lowfreq.dts
new file mode 100644
index 0000000000..74fa197ea9
--- /dev/null
+++ b/arch/m68k/dts/M54418TWR_nand_rmii_lowfreq.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR_nand_rmii_lowfreq";
+ compatible = "fsl,M54418TWR_nand_rmii_lowfreq";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54418TWR_serial_mii.dts b/arch/m68k/dts/M54418TWR_serial_mii.dts
new file mode 100644
index 0000000000..22f27b5612
--- /dev/null
+++ b/arch/m68k/dts/M54418TWR_serial_mii.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR_serial_mii";
+ compatible = "fsl,M54418TWR_serial_mii";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54418TWR_serial_rmii.dts b/arch/m68k/dts/M54418TWR_serial_rmii.dts
new file mode 100644
index 0000000000..0ddefd9da2
--- /dev/null
+++ b/arch/m68k/dts/M54418TWR_serial_rmii.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Freescale M54418TWR_serial_rmii";
+ compatible = "fsl,M54418TWR_serial_rmii";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54451EVB.dts b/arch/m68k/dts/M54451EVB.dts
new file mode 100644
index 0000000000..b57bfea2cb
--- /dev/null
+++ b/arch/m68k/dts/M54451EVB.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54451EVB";
+ compatible = "fsl,M54451EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54451EVB_stmicro.dts b/arch/m68k/dts/M54451EVB_stmicro.dts
new file mode 100644
index 0000000000..9a088e16d0
--- /dev/null
+++ b/arch/m68k/dts/M54451EVB_stmicro.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54451EVB_stmicro";
+ compatible = "fsl,M54451EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54455EVB.dts b/arch/m68k/dts/M54455EVB.dts
new file mode 100644
index 0000000000..dd11181033
--- /dev/null
+++ b/arch/m68k/dts/M54455EVB.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54455EVB";
+ compatible = "fsl,M54455EVB";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54455EVB_a66.dts b/arch/m68k/dts/M54455EVB_a66.dts
new file mode 100644
index 0000000000..70d544b72d
--- /dev/null
+++ b/arch/m68k/dts/M54455EVB_a66.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54455EVB_a66";
+ compatible = "fsl,M54455EVB_a66";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54455EVB_i66.dts b/arch/m68k/dts/M54455EVB_i66.dts
new file mode 100644
index 0000000000..b37a87213f
--- /dev/null
+++ b/arch/m68k/dts/M54455EVB_i66.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54455EVB_i66";
+ compatible = "fsl,M54455EVB_i66";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M54455EVB_intel.dts b/arch/m68k/dts/M54455EVB_intel.dts
new file mode 100644
index 0000000000..c92228fc8b
--- /dev/null
+++ b/arch/m68k/dts/M54455EVB_intel.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54455EVB_intel";
+ compatible = "fsl,M5275EVB_intel";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/M54455EVB_stm33.dts b/arch/m68k/dts/M54455EVB_stm33.dts
new file mode 100644
index 0000000000..9e467f94a1
--- /dev/null
+++ b/arch/m68k/dts/M54455EVB_stm33.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5445x.dtsi"
+
+/ {
+ model = "Freescale M54455EVB_stm33";
+ compatible = "fsl,M5275EVB_stm33";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ status = "okay";
+};
diff --git a/arch/m68k/dts/M5475AFE.dts b/arch/m68k/dts/M5475AFE.dts
new file mode 100644
index 0000000000..0c0a79befa
--- /dev/null
+++ b/arch/m68k/dts/M5475AFE.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475AFE";
+ compatible = "fsl,M5475AFE";
+};
+
diff --git a/arch/m68k/dts/M5475BFE.dts b/arch/m68k/dts/M5475BFE.dts
new file mode 100644
index 0000000000..c4d14097cd
--- /dev/null
+++ b/arch/m68k/dts/M5475BFE.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475BFE";
+ compatible = "fsl,M5475BFE";
+};
+
diff --git a/arch/m68k/dts/M5475CFE.dts b/arch/m68k/dts/M5475CFE.dts
new file mode 100644
index 0000000000..4c92c332ba
--- /dev/null
+++ b/arch/m68k/dts/M5475CFE.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475CFE";
+ compatible = "fsl,M5475CFE";
+};
+
diff --git a/arch/m68k/dts/M5475DFE.dts b/arch/m68k/dts/M5475DFE.dts
new file mode 100644
index 0000000000..c41c1b3c12
--- /dev/null
+++ b/arch/m68k/dts/M5475DFE.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475DFE";
+ compatible = "fsl,M5475DFE";
+};
+
diff --git a/arch/m68k/dts/M5475EFE.dts b/arch/m68k/dts/M5475EFE.dts
new file mode 100644
index 0000000000..5a920b241a
--- /dev/null
+++ b/arch/m68k/dts/M5475EFE.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475EFE";
+ compatible = "fsl,M5475EFE";
+};
+
diff --git a/arch/m68k/dts/M5475FFE.dts b/arch/m68k/dts/M5475FFE.dts
new file mode 100644
index 0000000000..d312a6ae8d
--- /dev/null
+++ b/arch/m68k/dts/M5475FFE.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475FFE";
+ compatible = "fsl,M5475FFE";
+};
+
diff --git a/arch/m68k/dts/M5475GFE.dts b/arch/m68k/dts/M5475GFE.dts
new file mode 100644
index 0000000000..9e794dafa6
--- /dev/null
+++ b/arch/m68k/dts/M5475GFE.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5475GFE";
+ compatible = "fsl,M5475GFE";
+};
+
diff --git a/arch/m68k/dts/M5485AFE.dts b/arch/m68k/dts/M5485AFE.dts
new file mode 100644
index 0000000000..3466751174
--- /dev/null
+++ b/arch/m68k/dts/M5485AFE.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485AFE";
+ compatible = "fsl,M5485AFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
diff --git a/arch/m68k/dts/M5485BFE.dts b/arch/m68k/dts/M5485BFE.dts
new file mode 100644
index 0000000000..6d48795a4d
--- /dev/null
+++ b/arch/m68k/dts/M5485BFE.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485BFE";
+ compatible = "fsl,M5485BFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
diff --git a/arch/m68k/dts/M5485CFE.dts b/arch/m68k/dts/M5485CFE.dts
new file mode 100644
index 0000000000..d1a7d9d383
--- /dev/null
+++ b/arch/m68k/dts/M5485CFE.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485CFE";
+ compatible = "fsl,M5485CFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
diff --git a/arch/m68k/dts/M5485DFE.dts b/arch/m68k/dts/M5485DFE.dts
new file mode 100644
index 0000000000..7c362e26e5
--- /dev/null
+++ b/arch/m68k/dts/M5485DFE.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485DFE";
+ compatible = "fsl,M5485DFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
diff --git a/arch/m68k/dts/M5485EFE.dts b/arch/m68k/dts/M5485EFE.dts
new file mode 100644
index 0000000000..4c688dce2b
--- /dev/null
+++ b/arch/m68k/dts/M5485EFE.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485EFE";
+ compatible = "fsl,M5485EFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
diff --git a/arch/m68k/dts/M5485FFE.dts b/arch/m68k/dts/M5485FFE.dts
new file mode 100644
index 0000000000..87ec2c543d
--- /dev/null
+++ b/arch/m68k/dts/M5485FFE.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485FFE";
+ compatible = "fsl,M5485FFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
diff --git a/arch/m68k/dts/M5485GFE.dts b/arch/m68k/dts/M5485GFE.dts
new file mode 100644
index 0000000000..9f67e5516b
--- /dev/null
+++ b/arch/m68k/dts/M5485GFE.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485GFE";
+ compatible = "fsl,M5485GFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
diff --git a/arch/m68k/dts/M5485HFE.dts b/arch/m68k/dts/M5485HFE.dts
new file mode 100644
index 0000000000..2eb2213d78
--- /dev/null
+++ b/arch/m68k/dts/M5485HFE.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf54xx.dtsi"
+
+/ {
+ model = "Freescale M5485HFE";
+ compatible = "fsl,M5485HFE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
diff --git a/arch/m68k/dts/Makefile b/arch/m68k/dts/Makefile
new file mode 100644
index 0000000000..53a53d6dc8
--- /dev/null
+++ b/arch/m68k/dts/Makefile
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_TARGET_M52277EVB) += M52277EVB.dtb \
+ M52277EVB_stmicro.dtb
+dtb-$(CONFIG_TARGET_M5235EVB) += M5235EVB.dtb \
+ M5235EVB_Flash32.dtb
+dtb-$(CONFIG_TARGET_COBRA5272) += cobra5272.dtb
+dtb-$(CONFIG_TARGET_EB_CPU5282) += eb_cpu5282.dtb \
+ eb_cpu5282_internal.dtb
+dtb-$(CONFIG_TARGET_M5208EVBE) += M5208EVBE.dtb
+dtb-$(CONFIG_TARGET_M5249EVB) += M5249EVB.dtb
+dtb-$(CONFIG_TARGET_M5253DEMO) += M5253DEMO.dtb
+dtb-$(CONFIG_TARGET_M5272C3) += M5272C3.dtb
+dtb-$(CONFIG_TARGET_M5275EVB) += M5275EVB.dtb
+dtb-$(CONFIG_TARGET_M5282EVB) += M5282EVB.dtb
+dtb-$(CONFIG_TARGET_ASTRO_MCF5373L) += astro_mcf5373l.dtb
+dtb-$(CONFIG_TARGET_M53017EVB) += M53017EVB.dtb
+dtb-$(CONFIG_TARGET_M5373EVB) += M5373EVB.dtb
+dtb-$(CONFIG_TARGET_M54418TWR) += M54418TWR.dtb \
+ M54418TWR_nand_mii.dtb \
+ M54418TWR_nand_rmii.dtb \
+ M54418TWR_serial_mii.dtb \
+ M54418TWR_serial_rmii.dtb \
+ M54418TWR_nand_rmii_lowfreq.dtb
+dtb-$(CONFIG_TARGET_M54451EVB) += M54451EVB.dtb \
+ M54451EVB_stmicro.dtb
+dtb-$(CONFIG_TARGET_M54455EVB) += M54455EVB.dtb \
+ M54455EVB_intel.dtb \
+ M54455EVB_stm33.dtb \
+ M54455EVB_a66.dtb \
+ M54455EVB_i66.dtb
+dtb-$(CONFIG_TARGET_AMCORE) += amcore.dtb
+dtb-$(CONFIG_TARGET_STMARK2) += stmark2.dtb
+dtb-$(CONFIG_TARGET_M5475EVB) += M5475AFE.dtb \
+ M5475BFE.dtb \
+ M5475CFE.dtb \
+ M5475DFE.dtb \
+ M5475EFE.dtb \
+ M5475FFE.dtb \
+ M5475GFE.dtb
+dtb-$(CONFIG_TARGET_M5485EVB) += M5485AFE.dtb \
+ M5485BFE.dtb \
+ M5485CFE.dtb \
+ M5485DFE.dtb \
+ M5485EFE.dtb \
+ M5485FFE.dtb \
+ M5485GFE.dtb \
+ M5485HFE.dtb
+
+targets += $(dtb-y)
+
+DTC_FLAGS += -R 4 -p 0x1000
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ @:
+
+clean-files := *.dtb
diff --git a/arch/m68k/dts/amcore.dts b/arch/m68k/dts/amcore.dts
new file mode 100644
index 0000000000..c21fb8ff79
--- /dev/null
+++ b/arch/m68k/dts/amcore.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5307.dtsi"
+
+/ {
+ model = "Sysam AMCORE";
+ compatible = "sysam,AMCORE";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/astro_mcf5373l.dts b/arch/m68k/dts/astro_mcf5373l.dts
new file mode 100644
index 0000000000..1b1a46ac2d
--- /dev/null
+++ b/arch/m68k/dts/astro_mcf5373l.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf537x.dtsi"
+
+/ {
+ model = "Astro mcf5373l";
+ compatible = "astro,mcf5373l";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/cobra5272.dts b/arch/m68k/dts/cobra5272.dts
new file mode 100644
index 0000000000..f3b74975de
--- /dev/null
+++ b/arch/m68k/dts/cobra5272.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5272.dtsi"
+
+/ {
+ model = "Cobra 5272";
+ compatible = "cobra,M5272";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/eb_cpu5282.dts b/arch/m68k/dts/eb_cpu5282.dts
new file mode 100644
index 0000000000..4641e9cb56
--- /dev/null
+++ b/arch/m68k/dts/eb_cpu5282.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5282.dtsi"
+
+/ {
+ model = "BuS eb_cpuM5282";
+ compatible = "bus,eb_cpuM5282";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/eb_cpu5282_internal.dts b/arch/m68k/dts/eb_cpu5282_internal.dts
new file mode 100644
index 0000000000..0acb7935f4
--- /dev/null
+++ b/arch/m68k/dts/eb_cpu5282_internal.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5282.dtsi"
+
+/ {
+ model = "BuS eb_cpu5282_internals";
+ compatible = "bus,eb_cpu5282_internals";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
diff --git a/arch/m68k/dts/stmark2.dts b/arch/m68k/dts/stmark2.dts
new file mode 100644
index 0000000000..fd8ce4fa35
--- /dev/null
+++ b/arch/m68k/dts/stmark2.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+ model = "Sysam stmark2";
+ compatible = "sysam,stmark2";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&dspi0 {
+ spi-mode = <3>;
+ status = "okay";
+
+ flash: is25lp128 at 1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <60000000>;
+ reg = <1>;
+ };
+};
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 08/11] m68k: enabling long jumps on mcf54x5 SoCs
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
` (6 preceding siblings ...)
2018-10-09 21:43 ` [U-Boot] [PATCH v2 07/11] m68k: add initial dts files for all m68k boards Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 09/11] configs: enable use of DT for all m68k boards Angelo Dureghello
` (2 subsequent siblings)
10 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
Growing of binary size asks for long assembly jumps.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- new patch
---
arch/m68k/cpu/mcf547x_8x/start.S | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S
index 7cb5db7ff0..4dd57bf39c 100644
--- a/arch/m68k/cpu/mcf547x_8x/start.S
+++ b/arch/m68k/cpu/mcf547x_8x/start.S
@@ -131,7 +131,8 @@ _start:
* then (and always) gd struct space will be reserved
*/
move.l %sp, -(%sp)
- bsr board_init_f_alloc_reserve
+ move.l #board_init_f_alloc_reserve, %a1
+ jsr (%a1)
/* update stack and frame-pointers */
move.l %d0, %sp
@@ -139,7 +140,8 @@ _start:
/* initialize reserved area */
move.l %d0, -(%sp)
- bsr board_init_f_init_reserve
+ move.l #board_init_f_init_reserve, %a1
+ jsr (%a1)
/* run low-level CPU init code (from flash) */
jbsr cpu_init_f
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 09/11] configs: enable use of DT for all m68k boards
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
` (7 preceding siblings ...)
2018-10-09 21:43 ` [U-Boot] [PATCH v2 08/11] m68k: enabling long jumps on mcf54x5 SoCs Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 10/11] configs: add DM_SPI config option Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 11/11] configs: remove CONFIG_SYS_DSPI_XX references Angelo Dureghello
10 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
Enable DT usage for all m68k boards. To provide a
working single binary, the dts has been kept as embedded.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- new patch
---
configs/M5208EVBE_defconfig | 2 ++
configs/M52277EVB_defconfig | 2 ++
configs/M52277EVB_stmicro_defconfig | 2 ++
configs/M5235EVB_Flash32_defconfig | 2 ++
configs/M5235EVB_defconfig | 2 ++
configs/M5249EVB_defconfig | 2 ++
configs/M5253DEMO_defconfig | 2 ++
configs/M5272C3_defconfig | 2 ++
configs/M5275EVB_defconfig | 3 +++
configs/M5282EVB_defconfig | 2 ++
configs/M53017EVB_defconfig | 2 ++
configs/M5329AFEE_defconfig | 2 ++
configs/M5329BFEE_defconfig | 2 ++
configs/M5373EVB_defconfig | 2 ++
configs/M54418TWR_defconfig | 2 ++
configs/M54418TWR_nand_mii_defconfig | 2 ++
configs/M54418TWR_nand_rmii_defconfig | 2 ++
configs/M54418TWR_nand_rmii_lowfreq_defconfig | 2 ++
configs/M54418TWR_serial_mii_defconfig | 2 ++
configs/M54418TWR_serial_rmii_defconfig | 2 ++
configs/M54451EVB_defconfig | 2 ++
configs/M54451EVB_stmicro_defconfig | 2 ++
configs/M54455EVB_a66_defconfig | 2 ++
configs/M54455EVB_defconfig | 2 ++
configs/M54455EVB_i66_defconfig | 2 ++
configs/M54455EVB_intel_defconfig | 2 ++
configs/M54455EVB_stm33_defconfig | 2 ++
configs/M5475BFE_defconfig | 2 ++
configs/M5475CFE_defconfig | 2 ++
configs/M5475DFE_defconfig | 2 ++
configs/M5475EFE_defconfig | 2 ++
configs/M5475FFE_defconfig | 2 ++
configs/M5475GFE_defconfig | 2 ++
configs/M5485AFE_defconfig | 2 ++
configs/M5485BFE_defconfig | 2 ++
configs/M5485CFE_defconfig | 2 ++
configs/M5485DFE_defconfig | 2 ++
configs/M5485EFE_defconfig | 2 ++
configs/M5485FFE_defconfig | 2 ++
configs/M5485GFE_defconfig | 2 ++
configs/M5485HFE_defconfig | 2 ++
configs/amcore_defconfig | 2 ++
configs/astro_mcf5373l_defconfig | 2 ++
configs/cobra5272_defconfig | 2 ++
configs/eb_cpu5282_defconfig | 2 ++
configs/eb_cpu5282_internal_defconfig | 2 ++
configs/stmark2_defconfig | 2 ++
47 files changed, 95 insertions(+)
diff --git a/configs/M5208EVBE_defconfig b/configs/M5208EVBE_defconfig
index 920476042d..69f44dface 100644
--- a/configs/M5208EVBE_defconfig
+++ b/configs/M5208EVBE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x0
CONFIG_TARGET_M5208EVBE=y
+CONFIG_DEFAULT_DEVICE_TREE="M5208EVBE"
+CONFIG_OF_EMBED=y
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M52277EVB_defconfig b/configs/M52277EVB_defconfig
index 233e258a61..b41209ab6f 100644
--- a/configs/M52277EVB_defconfig
+++ b/configs/M52277EVB_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x0
CONFIG_TARGET_M52277EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M52277EVB"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M52277EVB_stmicro_defconfig b/configs/M52277EVB_stmicro_defconfig
index 573cea9655..d1a3e7db3c 100644
--- a/configs/M52277EVB_stmicro_defconfig
+++ b/configs/M52277EVB_stmicro_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x43E00000
CONFIG_TARGET_M52277EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M52277EVB_stmicro"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M5235EVB_Flash32_defconfig b/configs/M5235EVB_Flash32_defconfig
index 7d3b6d8581..1ae7ed5114 100644
--- a/configs/M5235EVB_Flash32_defconfig
+++ b/configs/M5235EVB_Flash32_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFFC00000
CONFIG_TARGET_M5235EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5235EVB_Flash32"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="NORFLASH_PS32BIT"
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M5235EVB_defconfig b/configs/M5235EVB_defconfig
index 78d8ddc130..5ecdcaccf4 100644
--- a/configs/M5235EVB_defconfig
+++ b/configs/M5235EVB_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFFE00000
CONFIG_TARGET_M5235EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5235EVB"
+CONFIG_OF_EMBED=y
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5249EVB_defconfig b/configs/M5249EVB_defconfig
index 8478136c6b..6c3cb549a9 100644
--- a/configs/M5249EVB_defconfig
+++ b/configs/M5249EVB_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFFE00000
CONFIG_TARGET_M5249EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5249EVB"
+CONFIG_OF_EMBED=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig
index 4685c4eb83..cdfe53c367 100644
--- a/configs/M5253DEMO_defconfig
+++ b/configs/M5253DEMO_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5253DEMO=y
+CONFIG_DEFAULT_DEVICE_TREE="M5253DEMO"
+CONFIG_OF_EMBED=y
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5272C3_defconfig b/configs/M5272C3_defconfig
index 7a4e1d4346..9d3f01aa20 100644
--- a/configs/M5272C3_defconfig
+++ b/configs/M5272C3_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFFE00000
CONFIG_TARGET_M5272C3=y
+CONFIG_DEFAULT_DEVICE_TREE="M5272C3"
+CONFIG_OF_EMBED=y
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5275EVB_defconfig b/configs/M5275EVB_defconfig
index 8619c89996..18ee897bec 100644
--- a/configs/M5275EVB_defconfig
+++ b/configs/M5275EVB_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFFE00000
CONFIG_TARGET_M5275EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5275EVB"
+CONFIG_OF_EMBED=y
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
@@ -17,3 +19,4 @@ CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_MII=y
+CONFIG_DM_SERIAL=y
diff --git a/configs/M5282EVB_defconfig b/configs/M5282EVB_defconfig
index 3f10c15a83..b0965f300f 100644
--- a/configs/M5282EVB_defconfig
+++ b/configs/M5282EVB_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFFE00000
CONFIG_TARGET_M5282EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5282EVB"
+CONFIG_OF_EMBED=y
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M53017EVB_defconfig b/configs/M53017EVB_defconfig
index 5b0430f3ef..65d19ad2aa 100644
--- a/configs/M53017EVB_defconfig
+++ b/configs/M53017EVB_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x0
CONFIG_TARGET_M53017EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M53017EVB"
+CONFIG_OF_EMBED=y
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock3 rw rootfstype=jffs2"
diff --git a/configs/M5329AFEE_defconfig b/configs/M5329AFEE_defconfig
index 0b66da2645..c7545f2fc4 100644
--- a/configs/M5329AFEE_defconfig
+++ b/configs/M5329AFEE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x0
CONFIG_TARGET_M5329EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5329AFEE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=0"
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M5329BFEE_defconfig b/configs/M5329BFEE_defconfig
index b2c97b8485..12eea5713d 100644
--- a/configs/M5329BFEE_defconfig
+++ b/configs/M5329BFEE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x0
CONFIG_TARGET_M5329EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5329BFEE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16"
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M5373EVB_defconfig b/configs/M5373EVB_defconfig
index 38641f42e5..bb29b88961 100644
--- a/configs/M5373EVB_defconfig
+++ b/configs/M5373EVB_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x0
CONFIG_TARGET_M5373EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5373EVB"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16"
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M54418TWR_defconfig b/configs/M54418TWR_defconfig
index f69f405d5a..20fec8a9a7 100644
--- a/configs/M54418TWR_defconfig
+++ b/configs/M54418TWR_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x47E00000
CONFIG_TARGET_M54418TWR=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=50000000"
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.1.1:/tftpboot/192.168.1.2 ip=192.168.1.2:192.168.1.1:192.168.1.1: 255.255.255.0::eth0:off:rw console=ttyS0,115200"
diff --git a/configs/M54418TWR_nand_mii_defconfig b/configs/M54418TWR_nand_mii_defconfig
index 04ca3a8114..b7cf5eca66 100644
--- a/configs/M54418TWR_nand_mii_defconfig
+++ b/configs/M54418TWR_nand_mii_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x47E00000
CONFIG_TARGET_M54418TWR=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_nand_mii"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_INPUT_CLKSRC=25000000"
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro,-(jffs2) console=ttyS0,115200"
diff --git a/configs/M54418TWR_nand_rmii_defconfig b/configs/M54418TWR_nand_rmii_defconfig
index f6acf6019d..fa40036a04 100644
--- a/configs/M54418TWR_nand_rmii_defconfig
+++ b/configs/M54418TWR_nand_rmii_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x47E00000
CONFIG_TARGET_M54418TWR=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_nand_rmii"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_INPUT_CLKSRC=50000000"
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro,-(jffs2) console=ttyS0,115200"
diff --git a/configs/M54418TWR_nand_rmii_lowfreq_defconfig b/configs/M54418TWR_nand_rmii_lowfreq_defconfig
index 6b631d6d4b..95fbb8af7a 100644
--- a/configs/M54418TWR_nand_rmii_lowfreq_defconfig
+++ b/configs/M54418TWR_nand_rmii_lowfreq_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x47E00000
CONFIG_TARGET_M54418TWR=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_nand_rmii_lowfreq"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_INPUT_CLKSRC=50000000"
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro,-(jffs2) console=ttyS0,115200"
diff --git a/configs/M54418TWR_serial_mii_defconfig b/configs/M54418TWR_serial_mii_defconfig
index b2266a0577..39912675c7 100644
--- a/configs/M54418TWR_serial_mii_defconfig
+++ b/configs/M54418TWR_serial_mii_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x47E00000
CONFIG_TARGET_M54418TWR=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_serial_mii"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=25000000"
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.1.1:/tftpboot/192.168.1.2 ip=192.168.1.2:192.168.1.1:192.168.1.1: 255.255.255.0::eth0:off:rw console=ttyS0,115200"
diff --git a/configs/M54418TWR_serial_rmii_defconfig b/configs/M54418TWR_serial_rmii_defconfig
index f69f405d5a..6635133652 100644
--- a/configs/M54418TWR_serial_rmii_defconfig
+++ b/configs/M54418TWR_serial_rmii_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x47E00000
CONFIG_TARGET_M54418TWR=y
+CONFIG_DEFAULT_DEVICE_TREE="M54418TWR_serial_rmii"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=50000000"
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.1.1:/tftpboot/192.168.1.2 ip=192.168.1.2:192.168.1.1:192.168.1.1: 255.255.255.0::eth0:off:rw console=ttyS0,115200"
diff --git a/configs/M54451EVB_defconfig b/configs/M54451EVB_defconfig
index 070c4e7392..81797cbaef 100644
--- a/configs/M54451EVB_defconfig
+++ b/configs/M54451EVB_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x0
CONFIG_TARGET_M54451EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M54451EVB"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_INPUT_CLKSRC=24000000"
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
diff --git a/configs/M54451EVB_stmicro_defconfig b/configs/M54451EVB_stmicro_defconfig
index d819ad4112..a4f12c0dfd 100644
--- a/configs/M54451EVB_stmicro_defconfig
+++ b/configs/M54451EVB_stmicro_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x47E00000
CONFIG_TARGET_M54451EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M54451EVB_stmicro"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_INPUT_CLKSRC=24000000"
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
diff --git a/configs/M54455EVB_a66_defconfig b/configs/M54455EVB_a66_defconfig
index 75d85de27a..26bcab9799 100644
--- a/configs/M54455EVB_a66_defconfig
+++ b/configs/M54455EVB_a66_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_TARGET_M54455EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_a66"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=66666666"
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
diff --git a/configs/M54455EVB_defconfig b/configs/M54455EVB_defconfig
index 84303f11c2..7a18ee01a9 100644
--- a/configs/M54455EVB_defconfig
+++ b/configs/M54455EVB_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_TARGET_M54455EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M54455EVB"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=33333333"
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
diff --git a/configs/M54455EVB_i66_defconfig b/configs/M54455EVB_i66_defconfig
index ec5d69ae9f..61256211c3 100644
--- a/configs/M54455EVB_i66_defconfig
+++ b/configs/M54455EVB_i66_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x0
CONFIG_TARGET_M54455EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_i66"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=66666666"
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
diff --git a/configs/M54455EVB_intel_defconfig b/configs/M54455EVB_intel_defconfig
index 7019cd66d9..ce3d3f0093 100644
--- a/configs/M54455EVB_intel_defconfig
+++ b/configs/M54455EVB_intel_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x0
CONFIG_TARGET_M54455EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_intel"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=33333333"
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
diff --git a/configs/M54455EVB_stm33_defconfig b/configs/M54455EVB_stm33_defconfig
index 62e9d26fa6..0ab2c6bcd8 100644
--- a/configs/M54455EVB_stm33_defconfig
+++ b/configs/M54455EVB_stm33_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x4FE00000
CONFIG_TARGET_M54455EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M54455EVB_stm33"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_INPUT_CLKSRC=33333333"
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
diff --git a/configs/M5475BFE_defconfig b/configs/M5475BFE_defconfig
index 29977f30a1..3a1194d9c5 100644
--- a/configs/M5475BFE_defconfig
+++ b/configs/M5475BFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5475EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475BFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5475CFE_defconfig b/configs/M5475CFE_defconfig
index 14f29469cc..6768b88e15 100644
--- a/configs/M5475CFE_defconfig
+++ b/configs/M5475CFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5475EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475CFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5475DFE_defconfig b/configs/M5475DFE_defconfig
index ee7e45648e..a674cbdf74 100644
--- a/configs/M5475DFE_defconfig
+++ b/configs/M5475DFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5475EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475DFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5475EFE_defconfig b/configs/M5475EFE_defconfig
index 302651f964..fa652b7780 100644
--- a/configs/M5475EFE_defconfig
+++ b/configs/M5475EFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5475EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475EFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5475FFE_defconfig b/configs/M5475FFE_defconfig
index a3f418862c..bdd2f695d5 100644
--- a/configs/M5475FFE_defconfig
+++ b/configs/M5475FFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5475EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475FFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5475GFE_defconfig b/configs/M5475GFE_defconfig
index 39d3409409..bb97851aab 100644
--- a/configs/M5475GFE_defconfig
+++ b/configs/M5475GFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5475EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475GFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=4,SYS_DRAMSZ=64"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5485AFE_defconfig b/configs/M5485AFE_defconfig
index 496db41e34..ca0e186237 100644
--- a/configs/M5485AFE_defconfig
+++ b/configs/M5485AFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5485EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485AFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5485BFE_defconfig b/configs/M5485BFE_defconfig
index b5b5153199..2b2999bed7 100644
--- a/configs/M5485BFE_defconfig
+++ b/configs/M5485BFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5485EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485BFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5485CFE_defconfig b/configs/M5485CFE_defconfig
index a0446feac0..6c6752c6c3 100644
--- a/configs/M5485CFE_defconfig
+++ b/configs/M5485CFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5485EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485CFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5485DFE_defconfig b/configs/M5485DFE_defconfig
index ba4f03c5bf..d351622538 100644
--- a/configs/M5485DFE_defconfig
+++ b/configs/M5485DFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5485EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485DFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5485EFE_defconfig b/configs/M5485EFE_defconfig
index 0c24ab7b30..8c3ea2b22f 100644
--- a/configs/M5485EFE_defconfig
+++ b/configs/M5485EFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5485EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485EFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5485FFE_defconfig b/configs/M5485FFE_defconfig
index 1399d91b35..218d708a4e 100644
--- a/configs/M5485FFE_defconfig
+++ b/configs/M5485FFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5485EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485FFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5485GFE_defconfig b/configs/M5485GFE_defconfig
index 162618b00b..1cc284d226 100644
--- a/configs/M5485GFE_defconfig
+++ b/configs/M5485GFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5485EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485GFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/M5485HFE_defconfig b/configs/M5485HFE_defconfig
index 201610c65a..eb0f5c36b7 100644
--- a/configs/M5485HFE_defconfig
+++ b/configs/M5485HFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5485EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5485HFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/amcore_defconfig b/configs/amcore_defconfig
index ce61e16c8d..c9e83ea825 100644
--- a/configs/amcore_defconfig
+++ b/configs/amcore_defconfig
@@ -2,6 +2,8 @@ CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFFC00000
CONFIG_SYS_MALLOC_F_LEN=0x800
CONFIG_TARGET_AMCORE=y
+CONFIG_DEFAULT_DEVICE_TREE="amcore"
+CONFIG_OF_EMBED=y
CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/astro_mcf5373l_defconfig b/configs/astro_mcf5373l_defconfig
index da6ebe7dcd..2456075cc3 100644
--- a/configs/astro_mcf5373l_defconfig
+++ b/configs/astro_mcf5373l_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_TARGET_ASTRO_MCF5373L=y
+CONFIG_DEFAULT_DEVICE_TREE="astro_mcf5373l"
+CONFIG_OF_EMBED=y
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS=" console=ttyS2,115200 rootfstype=romfs loaderversion=$loaderversion"
diff --git a/configs/cobra5272_defconfig b/configs/cobra5272_defconfig
index fc295af114..a0a3a91523 100644
--- a/configs/cobra5272_defconfig
+++ b/configs/cobra5272_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFFE00000
CONFIG_TARGET_COBRA5272=y
+CONFIG_DEFAULT_DEVICE_TREE="cobra5272"
+CONFIG_OF_EMBED=y
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/eb_cpu5282_defconfig b/configs/eb_cpu5282_defconfig
index 08965c9ac4..d5b35536a5 100644
--- a/configs/eb_cpu5282_defconfig
+++ b/configs/eb_cpu5282_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF000000
CONFIG_TARGET_EB_CPU5282=y
+CONFIG_DEFAULT_DEVICE_TREE="eb_cpu5282"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xFF000400"
CONFIG_BOOTDELAY=5
# CONFIG_CONSOLE_MUX is not set
diff --git a/configs/eb_cpu5282_internal_defconfig b/configs/eb_cpu5282_internal_defconfig
index aaee4abe44..013e0cb750 100644
--- a/configs/eb_cpu5282_internal_defconfig
+++ b/configs/eb_cpu5282_internal_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xF0000000
CONFIG_TARGET_EB_CPU5282=y
+CONFIG_DEFAULT_DEVICE_TREE="eb_cpu5282_internal"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xF0000418"
CONFIG_BOOTDELAY=5
# CONFIG_CONSOLE_MUX is not set
diff --git a/configs/stmark2_defconfig b/configs/stmark2_defconfig
index 48e851d4a4..174a2f0a4e 100644
--- a/configs/stmark2_defconfig
+++ b/configs/stmark2_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0x47E00000
CONFIG_TARGET_STMARK2=y
+CONFIG_DEFAULT_DEVICE_TREE="stmark2"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=30000000"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 10/11] configs: add DM_SPI config option
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
` (8 preceding siblings ...)
2018-10-09 21:43 ` [U-Boot] [PATCH v2 09/11] configs: enable use of DT for all m68k boards Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
2018-10-09 21:43 ` [U-Boot] [PATCH v2 11/11] configs: remove CONFIG_SYS_DSPI_XX references Angelo Dureghello
10 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
This patch adds CONFIG_DM_SPI for all m68k boards using
the cf_spi.c driver (DSPI module).
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- new patch
---
configs/M52277EVB_defconfig | 1 +
configs/M52277EVB_stmicro_defconfig | 1 +
configs/M54418TWR_defconfig | 1 +
configs/M54418TWR_nand_mii_defconfig | 1 +
configs/M54418TWR_nand_rmii_defconfig | 1 +
configs/M54418TWR_nand_rmii_lowfreq_defconfig | 1 +
configs/M54418TWR_serial_mii_defconfig | 1 +
configs/M54418TWR_serial_rmii_defconfig | 1 +
configs/M54451EVB_defconfig | 1 +
configs/M54451EVB_stmicro_defconfig | 1 +
configs/M54455EVB_a66_defconfig | 1 +
configs/M54455EVB_defconfig | 1 +
configs/M54455EVB_i66_defconfig | 1 +
configs/M54455EVB_intel_defconfig | 1 +
configs/M54455EVB_stm33_defconfig | 1 +
configs/M5475AFE_defconfig | 2 ++
configs/stmark2_defconfig | 2 ++
17 files changed, 19 insertions(+)
diff --git a/configs/M52277EVB_defconfig b/configs/M52277EVB_defconfig
index b41209ab6f..3e67f6643d 100644
--- a/configs/M52277EVB_defconfig
+++ b/configs/M52277EVB_defconfig
@@ -23,4 +23,5 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M52277EVB_stmicro_defconfig b/configs/M52277EVB_stmicro_defconfig
index d1a3e7db3c..2f3b664b67 100644
--- a/configs/M52277EVB_stmicro_defconfig
+++ b/configs/M52277EVB_stmicro_defconfig
@@ -22,4 +22,5 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_defconfig b/configs/M54418TWR_defconfig
index 20fec8a9a7..e57b24ff23 100644
--- a/configs/M54418TWR_defconfig
+++ b/configs/M54418TWR_defconfig
@@ -27,3 +27,4 @@ CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
CONFIG_CF_SPI=y
+CONFIG_DM_SPI=y
diff --git a/configs/M54418TWR_nand_mii_defconfig b/configs/M54418TWR_nand_mii_defconfig
index b7cf5eca66..dcb1789824 100644
--- a/configs/M54418TWR_nand_mii_defconfig
+++ b/configs/M54418TWR_nand_mii_defconfig
@@ -25,4 +25,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_nand_rmii_defconfig b/configs/M54418TWR_nand_rmii_defconfig
index fa40036a04..f483b15258 100644
--- a/configs/M54418TWR_nand_rmii_defconfig
+++ b/configs/M54418TWR_nand_rmii_defconfig
@@ -25,4 +25,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_nand_rmii_lowfreq_defconfig b/configs/M54418TWR_nand_rmii_lowfreq_defconfig
index 95fbb8af7a..848eeca893 100644
--- a/configs/M54418TWR_nand_rmii_lowfreq_defconfig
+++ b/configs/M54418TWR_nand_rmii_lowfreq_defconfig
@@ -25,4 +25,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_serial_mii_defconfig b/configs/M54418TWR_serial_mii_defconfig
index 39912675c7..f3abd72045 100644
--- a/configs/M54418TWR_serial_mii_defconfig
+++ b/configs/M54418TWR_serial_mii_defconfig
@@ -26,4 +26,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54418TWR_serial_rmii_defconfig b/configs/M54418TWR_serial_rmii_defconfig
index 6635133652..d69e5598ff 100644
--- a/configs/M54418TWR_serial_rmii_defconfig
+++ b/configs/M54418TWR_serial_rmii_defconfig
@@ -26,4 +26,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54451EVB_defconfig b/configs/M54451EVB_defconfig
index 81797cbaef..f1a2376231 100644
--- a/configs/M54451EVB_defconfig
+++ b/configs/M54451EVB_defconfig
@@ -28,4 +28,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54451EVB_stmicro_defconfig b/configs/M54451EVB_stmicro_defconfig
index a4f12c0dfd..d3ee1677ca 100644
--- a/configs/M54451EVB_stmicro_defconfig
+++ b/configs/M54451EVB_stmicro_defconfig
@@ -27,4 +27,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54455EVB_a66_defconfig b/configs/M54455EVB_a66_defconfig
index 26bcab9799..5b6ef04674 100644
--- a/configs/M54455EVB_a66_defconfig
+++ b/configs/M54455EVB_a66_defconfig
@@ -32,4 +32,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54455EVB_defconfig b/configs/M54455EVB_defconfig
index 7a18ee01a9..cb45fac3de 100644
--- a/configs/M54455EVB_defconfig
+++ b/configs/M54455EVB_defconfig
@@ -33,4 +33,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54455EVB_i66_defconfig b/configs/M54455EVB_i66_defconfig
index 61256211c3..4ee2aa855e 100644
--- a/configs/M54455EVB_i66_defconfig
+++ b/configs/M54455EVB_i66_defconfig
@@ -32,4 +32,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54455EVB_intel_defconfig b/configs/M54455EVB_intel_defconfig
index ce3d3f0093..24a7ebbb84 100644
--- a/configs/M54455EVB_intel_defconfig
+++ b/configs/M54455EVB_intel_defconfig
@@ -32,4 +32,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M54455EVB_stm33_defconfig b/configs/M54455EVB_stm33_defconfig
index 0ab2c6bcd8..9e68bd3270 100644
--- a/configs/M54455EVB_stm33_defconfig
+++ b/configs/M54455EVB_stm33_defconfig
@@ -32,4 +32,5 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_CF_SPI=y
diff --git a/configs/M5475AFE_defconfig b/configs/M5475AFE_defconfig
index 5f18579d52..59cefb11fb 100644
--- a/configs/M5475AFE_defconfig
+++ b/configs/M5475AFE_defconfig
@@ -1,6 +1,8 @@
CONFIG_M68K=y
CONFIG_SYS_TEXT_BASE=0xFF800000
CONFIG_TARGET_M5475EVB=y
+CONFIG_DEFAULT_DEVICE_TREE="M5475AFE"
+CONFIG_OF_EMBED=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64"
CONFIG_BOOTDELAY=1
# CONFIG_CMDLINE_EDITING is not set
diff --git a/configs/stmark2_defconfig b/configs/stmark2_defconfig
index 174a2f0a4e..247b02da12 100644
--- a/configs/stmark2_defconfig
+++ b/configs/stmark2_defconfig
@@ -28,5 +28,7 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_CF_SPI=y
CONFIG_REGEX=y
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH v2 11/11] configs: remove CONFIG_SYS_DSPI_XX references
2018-10-09 21:43 [U-Boot] [PATCH v2 00/11] m68k: initial devicetree support Angelo Dureghello
` (9 preceding siblings ...)
2018-10-09 21:43 ` [U-Boot] [PATCH v2 10/11] configs: add DM_SPI config option Angelo Dureghello
@ 2018-10-09 21:43 ` Angelo Dureghello
10 siblings, 0 replies; 18+ messages in thread
From: Angelo Dureghello @ 2018-10-09 21:43 UTC (permalink / raw)
To: u-boot
This patch removes CONFIG_SYS_DSPI_XX options from
include/configs "m68k" .h board files, since CTAR
registers are now set with default values in the cf_spi
driver initialization, and configurable by devicetree.
Note, these options cannot be totally removed from the
whitelist, since still used from boards using fsl_dspi.c
(mostly arm-based boards).
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
Changes for v2:
- new patch
---
include/configs/M52277EVB.h | 11 -----------
include/configs/M54418TWR.h | 12 ------------
include/configs/M54451EVB.h | 12 ------------
include/configs/M54455EVB.h | 10 ----------
include/configs/stmark2.h | 11 -----------
5 files changed, 56 deletions(-)
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index 1f79c1505a..07e89c9465 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -104,17 +104,6 @@
#define CONFIG_CF_DSPI
#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE 0x7
-#ifdef CONFIG_CMD_SPI
-# define CONFIG_SYS_DSPI_CS2
-
-# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
- DSPI_CTAR_PCSSCK_1CLK | \
- DSPI_CTAR_PASC(0) | \
- DSPI_CTAR_PDT(0) | \
- DSPI_CTAR_CSSCK(0) | \
- DSPI_CTAR_ASC(0) | \
- DSPI_CTAR_DT(1))
-#endif
/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
index 0d829b4e74..1bf21be734 100644
--- a/include/configs/M54418TWR.h
+++ b/include/configs/M54418TWR.h
@@ -153,18 +153,6 @@
#define CONFIG_SERIAL_FLASH
#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE 0x7
-#ifdef CONFIG_CMD_SPI
-
-# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
- DSPI_CTAR_PCSSCK_1CLK | \
- DSPI_CTAR_PASC(0) | \
- DSPI_CTAR_PDT(0) | \
- DSPI_CTAR_CSSCK(0) | \
- DSPI_CTAR_ASC(0) | \
- DSPI_CTAR_DT(1))
-# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
-# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
-#endif
/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index 5bd1d4f240..15635b33b5 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -118,18 +118,6 @@
#define CONFIG_SERIAL_FLASH
#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE 0x7
-#ifdef CONFIG_CMD_SPI
-
-# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
- DSPI_CTAR_PCSSCK_1CLK | \
- DSPI_CTAR_PASC(0) | \
- DSPI_CTAR_PDT(0) | \
- DSPI_CTAR_CSSCK(0) | \
- DSPI_CTAR_ASC(0) | \
- DSPI_CTAR_DT(1))
-# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
-# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
-#endif
/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 2de51d91a3..118078db3e 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -144,16 +144,6 @@
#define CONFIG_CF_DSPI
#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE 0x13
-#ifdef CONFIG_CMD_SPI
-
-# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
- DSPI_CTAR_PCSSCK_1CLK | \
- DSPI_CTAR_PASC(0) | \
- DSPI_CTAR_PDT(0) | \
- DSPI_CTAR_CSSCK(0) | \
- DSPI_CTAR_ASC(0) | \
- DSPI_CTAR_DT(1))
-#endif
/* PCI */
#ifdef CONFIG_CMD_PCI
diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h
index c408db865e..ed145e1d50 100644
--- a/include/configs/stmark2.h
+++ b/include/configs/stmark2.h
@@ -72,17 +72,6 @@
#define CONFIG_SYS_SBFHDR_SIZE 0x7
-#define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
- DSPI_CTAR_PCSSCK_1CLK | \
- DSPI_CTAR_PASC(0) | \
- DSPI_CTAR_PDT(0) | \
- DSPI_CTAR_CSSCK(0) | \
- DSPI_CTAR_ASC(0) | \
- DSPI_CTAR_DT(1) | \
- DSPI_CTAR_BR(6))
-#define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
-#define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
-
/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK
--
2.19.1
^ permalink raw reply related [flat|nested] 18+ messages in thread