From: Aaron Lindsay <aaron@os.amperecomputing.com>
To: "qemu-arm@nongnu.org" <qemu-arm@nongnu.org>,
Peter Maydell <peter.maydell@linaro.org>,
Alistair Francis <alistair.francis@xilinx.com>,
Wei Huang <wei@redhat.com>,
Peter Crosthwaite <crosthwaite.peter@gmail.com>,
Richard Henderson <richard.henderson@linaro.org>
Cc: Michael Spradling <mspradli@codeaurora.org>,
Digant Desai <digantd@codeaurora.org>,
"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
Aaron Lindsay <aaron@os.amperecomputing.com>,
Aaron Lindsay <aclindsa@gmail.com>
Subject: [Qemu-devel] [PATCH v7 04/12] target/arm: Filter cycle counter based on PMCCFILTR_EL0
Date: Mon, 5 Nov 2018 18:51:54 +0000 [thread overview]
Message-ID: <20181105185046.2802-5-aaron@os.amperecomputing.com> (raw)
In-Reply-To: <20181105185046.2802-1-aaron@os.amperecomputing.com>
Rename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only
return 'true' if the specified counter is enabled and neither prohibited
or filtered.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/cpu.c | 3 ++
target/arm/cpu.h | 10 ++++-
target/arm/helper.c | 96 +++++++++++++++++++++++++++++++++++++++++----
3 files changed, 101 insertions(+), 8 deletions(-)
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 784a4c2dfc..9e54c56379 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -957,6 +957,9 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
if (!cpu->has_pmu) {
unset_feature(env, ARM_FEATURE_PMU);
cpu->id_aa64dfr0 &= ~0xf00;
+ } else if (!kvm_enabled()) {
+ arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
+ arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
}
if (!arm_feature(env, ARM_FEATURE_EL2)) {
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 50a0862c84..92282cd976 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -985,6 +985,12 @@ void pmccntr_op_finish(CPUARMState *env);
void pmu_op_start(CPUARMState *env);
void pmu_op_finish(CPUARMState *env);
+/**
+ * Functions to register as EL change hooks for PMU mode filtering
+ */
+void pmu_pre_el_change(ARMCPU *cpu, void *ignored);
+void pmu_post_el_change(ARMCPU *cpu, void *ignored);
+
/* SCTLR bit meanings. Several bits have been reused in newer
* versions of the architecture; in that case we define constants
* for both old and new bit meanings. Code which tests against those
@@ -1046,7 +1052,8 @@ void pmu_op_finish(CPUARMState *env);
#define MDCR_EPMAD (1U << 21)
#define MDCR_EDAD (1U << 20)
-#define MDCR_SPME (1U << 17)
+#define MDCR_SPME (1U << 17) /* MDCR_EL3 */
+#define MDCR_HPMD (1U << 17) /* MDCR_EL2 */
#define MDCR_SDD (1U << 16)
#define MDCR_SPD (3U << 14)
#define MDCR_TDRA (1U << 11)
@@ -1056,6 +1063,7 @@ void pmu_op_finish(CPUARMState *env);
#define MDCR_HPME (1U << 7)
#define MDCR_TPM (1U << 6)
#define MDCR_TPMCR (1U << 5)
+#define MDCR_HPMN (0x1fU)
/* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */
#define SDCR_VALID_MASK (MDCR_EPMAD | MDCR_EDAD | MDCR_SPME | MDCR_SPD)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 5deff3d11f..63d4e993f4 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -976,10 +976,24 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
/* Definitions for the PMU registers */
#define PMCRN_MASK 0xf800
#define PMCRN_SHIFT 11
+#define PMCRDP 0x10
#define PMCRD 0x8
#define PMCRC 0x4
#define PMCRE 0x1
+#define PMXEVTYPER_P 0x80000000
+#define PMXEVTYPER_U 0x40000000
+#define PMXEVTYPER_NSK 0x20000000
+#define PMXEVTYPER_NSU 0x10000000
+#define PMXEVTYPER_NSH 0x08000000
+#define PMXEVTYPER_M 0x04000000
+#define PMXEVTYPER_MT 0x02000000
+#define PMXEVTYPER_EVTCOUNT 0x0000ffff
+#define PMXEVTYPER_MASK (PMXEVTYPER_P | PMXEVTYPER_U | PMXEVTYPER_NSK | \
+ PMXEVTYPER_NSU | PMXEVTYPER_NSH | \
+ PMXEVTYPER_M | PMXEVTYPER_MT | \
+ PMXEVTYPER_EVTCOUNT)
+
static inline uint32_t pmu_num_counters(CPUARMState *env)
{
return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT;
@@ -1075,16 +1089,66 @@ static CPAccessResult pmreg_access_ccntr(CPUARMState *env,
return pmreg_access(env, ri, isread);
}
-static inline bool arm_ccnt_enabled(CPUARMState *env)
+/* Returns true if the counter (pass 31 for PMCCNTR) should count events using
+ * the current EL, security state, and register configuration.
+ */
+static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
{
- /* This does not support checking PMCCFILTR_EL0 register */
+ uint64_t filter;
+ bool e, p, u, nsk, nsu, nsh, m;
+ bool enabled, prohibited, filtered;
+ bool secure = arm_is_secure(env);
+ int el = arm_current_el(env);
+ uint8_t hpmn = env->cp15.mdcr_el2 & MDCR_HPMN;
- if (!(env->cp15.c9_pmcr & PMCRE) || !(env->cp15.c9_pmcnten & (1 << 31))) {
- return false;
+ if (!arm_feature(env, ARM_FEATURE_EL2) ||
+ (counter < hpmn || counter == 31)) {
+ e = env->cp15.c9_pmcr & PMCRE;
+ } else {
+ e = env->cp15.mdcr_el2 & MDCR_HPME;
}
+ enabled = e && (env->cp15.c9_pmcnten & (1 << counter));
- return true;
+ if (!secure) {
+ if (el == 2 && (counter < hpmn || counter == 31)) {
+ prohibited = env->cp15.mdcr_el2 & MDCR_HPMD;
+ } else {
+ prohibited = false;
+ }
+ } else {
+ prohibited = arm_feature(env, ARM_FEATURE_EL3) &&
+ (env->cp15.mdcr_el3 & MDCR_SPME);
+ }
+
+ if (prohibited && counter == 31) {
+ prohibited = env->cp15.c9_pmcr & PMCRDP;
+ }
+
+ /* TODO Remove assert, set filter to correct PMEVTYPER */
+ assert(counter == 31);
+ filter = env->cp15.pmccfiltr_el0;
+
+ p = filter & PMXEVTYPER_P;
+ u = filter & PMXEVTYPER_U;
+ nsk = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSK);
+ nsu = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSU);
+ nsh = arm_feature(env, ARM_FEATURE_EL2) && (filter & PMXEVTYPER_NSH);
+ m = arm_el_is_aa64(env, 1) &&
+ arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_M);
+
+ if (el == 0) {
+ filtered = secure ? u : u != nsu;
+ } else if (el == 1) {
+ filtered = secure ? p : p != nsk;
+ } else if (el == 2) {
+ filtered = !nsh;
+ } else { /* EL3 */
+ filtered = m != p;
+ }
+
+ return enabled && !prohibited && !filtered;
}
+
/*
* Ensure c15_ccnt is the guest-visible count so that operations such as
* enabling/disabling the counter or filtering, modifying the count itself,
@@ -1097,7 +1161,7 @@ void pmccntr_op_start(CPUARMState *env)
cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
- if (arm_ccnt_enabled(env)) {
+ if (pmu_counter_enabled(env, 31)) {
uint64_t eff_cycles = cycles;
if (env->cp15.c9_pmcr & PMCRD) {
/* Increment once every 64 processor clock cycles */
@@ -1116,7 +1180,7 @@ void pmccntr_op_start(CPUARMState *env)
*/
void pmccntr_op_finish(CPUARMState *env)
{
- if (arm_ccnt_enabled(env)) {
+ if (pmu_counter_enabled(env, 31)) {
uint64_t prev_cycles = env->cp15.c15_ccnt_delta;
if (env->cp15.c9_pmcr & PMCRD) {
@@ -1138,6 +1202,16 @@ void pmu_op_finish(CPUARMState *env)
pmccntr_op_finish(env);
}
+void pmu_pre_el_change(ARMCPU *cpu, void *ignored)
+{
+ pmu_op_start(&cpu->env);
+}
+
+void pmu_post_el_change(ARMCPU *cpu, void *ignored)
+{
+ pmu_op_finish(&cpu->env);
+}
+
static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
@@ -1209,6 +1283,14 @@ void pmu_op_finish(CPUARMState *env)
{
}
+void pmu_pre_el_change(ARMCPU *cpu, void *ignored)
+{
+}
+
+void pmu_post_el_change(ARMCPU *cpu, void *ignored)
+{
+}
+
#endif
static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri,
--
2.19.1
WARNING: multiple messages have this Message-ID (diff)
From: Aaron Lindsay <aaron@os.amperecomputing.com>
To: "qemu-arm@nongnu.org" <qemu-arm@nongnu.org>,
Peter Maydell <peter.maydell@linaro.org>,
Alistair Francis <alistair.francis@xilinx.com>,
Wei Huang <wei@redhat.com>,
Peter Crosthwaite <crosthwaite.peter@gmail.com>,
Richard Henderson <richard.henderson@linaro.org>
Cc: "qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
Michael Spradling <mspradli@codeaurora.org>,
Digant Desai <digantd@codeaurora.org>,
Aaron Lindsay <aaron@os.amperecomputing.com>,
Aaron Lindsay <alindsay@codeaurora.org>,
Aaron Lindsay <aclindsa@gmail.com>
Subject: [Qemu-devel] [PATCH v7 04/12] target/arm: Filter cycle counter based on PMCCFILTR_EL0
Date: Mon, 5 Nov 2018 18:51:54 +0000 [thread overview]
Message-ID: <20181105185046.2802-5-aaron@os.amperecomputing.com> (raw)
In-Reply-To: <20181105185046.2802-1-aaron@os.amperecomputing.com>
Rename arm_ccnt_enabled to pmu_counter_enabled, and add logic to only
return 'true' if the specified counter is enabled and neither prohibited
or filtered.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
target/arm/cpu.c | 3 ++
target/arm/cpu.h | 10 ++++-
target/arm/helper.c | 96 +++++++++++++++++++++++++++++++++++++++++----
3 files changed, 101 insertions(+), 8 deletions(-)
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 784a4c2dfc..9e54c56379 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -957,6 +957,9 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
if (!cpu->has_pmu) {
unset_feature(env, ARM_FEATURE_PMU);
cpu->id_aa64dfr0 &= ~0xf00;
+ } else if (!kvm_enabled()) {
+ arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
+ arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
}
if (!arm_feature(env, ARM_FEATURE_EL2)) {
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 50a0862c84..92282cd976 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -985,6 +985,12 @@ void pmccntr_op_finish(CPUARMState *env);
void pmu_op_start(CPUARMState *env);
void pmu_op_finish(CPUARMState *env);
+/**
+ * Functions to register as EL change hooks for PMU mode filtering
+ */
+void pmu_pre_el_change(ARMCPU *cpu, void *ignored);
+void pmu_post_el_change(ARMCPU *cpu, void *ignored);
+
/* SCTLR bit meanings. Several bits have been reused in newer
* versions of the architecture; in that case we define constants
* for both old and new bit meanings. Code which tests against those
@@ -1046,7 +1052,8 @@ void pmu_op_finish(CPUARMState *env);
#define MDCR_EPMAD (1U << 21)
#define MDCR_EDAD (1U << 20)
-#define MDCR_SPME (1U << 17)
+#define MDCR_SPME (1U << 17) /* MDCR_EL3 */
+#define MDCR_HPMD (1U << 17) /* MDCR_EL2 */
#define MDCR_SDD (1U << 16)
#define MDCR_SPD (3U << 14)
#define MDCR_TDRA (1U << 11)
@@ -1056,6 +1063,7 @@ void pmu_op_finish(CPUARMState *env);
#define MDCR_HPME (1U << 7)
#define MDCR_TPM (1U << 6)
#define MDCR_TPMCR (1U << 5)
+#define MDCR_HPMN (0x1fU)
/* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */
#define SDCR_VALID_MASK (MDCR_EPMAD | MDCR_EDAD | MDCR_SPME | MDCR_SPD)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 5deff3d11f..63d4e993f4 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -976,10 +976,24 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
/* Definitions for the PMU registers */
#define PMCRN_MASK 0xf800
#define PMCRN_SHIFT 11
+#define PMCRDP 0x10
#define PMCRD 0x8
#define PMCRC 0x4
#define PMCRE 0x1
+#define PMXEVTYPER_P 0x80000000
+#define PMXEVTYPER_U 0x40000000
+#define PMXEVTYPER_NSK 0x20000000
+#define PMXEVTYPER_NSU 0x10000000
+#define PMXEVTYPER_NSH 0x08000000
+#define PMXEVTYPER_M 0x04000000
+#define PMXEVTYPER_MT 0x02000000
+#define PMXEVTYPER_EVTCOUNT 0x0000ffff
+#define PMXEVTYPER_MASK (PMXEVTYPER_P | PMXEVTYPER_U | PMXEVTYPER_NSK | \
+ PMXEVTYPER_NSU | PMXEVTYPER_NSH | \
+ PMXEVTYPER_M | PMXEVTYPER_MT | \
+ PMXEVTYPER_EVTCOUNT)
+
static inline uint32_t pmu_num_counters(CPUARMState *env)
{
return (env->cp15.c9_pmcr & PMCRN_MASK) >> PMCRN_SHIFT;
@@ -1075,16 +1089,66 @@ static CPAccessResult pmreg_access_ccntr(CPUARMState *env,
return pmreg_access(env, ri, isread);
}
-static inline bool arm_ccnt_enabled(CPUARMState *env)
+/* Returns true if the counter (pass 31 for PMCCNTR) should count events using
+ * the current EL, security state, and register configuration.
+ */
+static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
{
- /* This does not support checking PMCCFILTR_EL0 register */
+ uint64_t filter;
+ bool e, p, u, nsk, nsu, nsh, m;
+ bool enabled, prohibited, filtered;
+ bool secure = arm_is_secure(env);
+ int el = arm_current_el(env);
+ uint8_t hpmn = env->cp15.mdcr_el2 & MDCR_HPMN;
- if (!(env->cp15.c9_pmcr & PMCRE) || !(env->cp15.c9_pmcnten & (1 << 31))) {
- return false;
+ if (!arm_feature(env, ARM_FEATURE_EL2) ||
+ (counter < hpmn || counter == 31)) {
+ e = env->cp15.c9_pmcr & PMCRE;
+ } else {
+ e = env->cp15.mdcr_el2 & MDCR_HPME;
}
+ enabled = e && (env->cp15.c9_pmcnten & (1 << counter));
- return true;
+ if (!secure) {
+ if (el == 2 && (counter < hpmn || counter == 31)) {
+ prohibited = env->cp15.mdcr_el2 & MDCR_HPMD;
+ } else {
+ prohibited = false;
+ }
+ } else {
+ prohibited = arm_feature(env, ARM_FEATURE_EL3) &&
+ (env->cp15.mdcr_el3 & MDCR_SPME);
+ }
+
+ if (prohibited && counter == 31) {
+ prohibited = env->cp15.c9_pmcr & PMCRDP;
+ }
+
+ /* TODO Remove assert, set filter to correct PMEVTYPER */
+ assert(counter == 31);
+ filter = env->cp15.pmccfiltr_el0;
+
+ p = filter & PMXEVTYPER_P;
+ u = filter & PMXEVTYPER_U;
+ nsk = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSK);
+ nsu = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSU);
+ nsh = arm_feature(env, ARM_FEATURE_EL2) && (filter & PMXEVTYPER_NSH);
+ m = arm_el_is_aa64(env, 1) &&
+ arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_M);
+
+ if (el == 0) {
+ filtered = secure ? u : u != nsu;
+ } else if (el == 1) {
+ filtered = secure ? p : p != nsk;
+ } else if (el == 2) {
+ filtered = !nsh;
+ } else { /* EL3 */
+ filtered = m != p;
+ }
+
+ return enabled && !prohibited && !filtered;
}
+
/*
* Ensure c15_ccnt is the guest-visible count so that operations such as
* enabling/disabling the counter or filtering, modifying the count itself,
@@ -1097,7 +1161,7 @@ void pmccntr_op_start(CPUARMState *env)
cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
- if (arm_ccnt_enabled(env)) {
+ if (pmu_counter_enabled(env, 31)) {
uint64_t eff_cycles = cycles;
if (env->cp15.c9_pmcr & PMCRD) {
/* Increment once every 64 processor clock cycles */
@@ -1116,7 +1180,7 @@ void pmccntr_op_start(CPUARMState *env)
*/
void pmccntr_op_finish(CPUARMState *env)
{
- if (arm_ccnt_enabled(env)) {
+ if (pmu_counter_enabled(env, 31)) {
uint64_t prev_cycles = env->cp15.c15_ccnt_delta;
if (env->cp15.c9_pmcr & PMCRD) {
@@ -1138,6 +1202,16 @@ void pmu_op_finish(CPUARMState *env)
pmccntr_op_finish(env);
}
+void pmu_pre_el_change(ARMCPU *cpu, void *ignored)
+{
+ pmu_op_start(&cpu->env);
+}
+
+void pmu_post_el_change(ARMCPU *cpu, void *ignored)
+{
+ pmu_op_finish(&cpu->env);
+}
+
static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
@@ -1209,6 +1283,14 @@ void pmu_op_finish(CPUARMState *env)
{
}
+void pmu_pre_el_change(ARMCPU *cpu, void *ignored)
+{
+}
+
+void pmu_post_el_change(ARMCPU *cpu, void *ignored)
+{
+}
+
#endif
static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri,
--
2.19.1
next prev parent reply other threads:[~2018-11-05 18:53 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-05 18:51 [Qemu-arm] [PATCH v7 00/12] More fully implement ARM PMUv3 Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] " Aaron Lindsay
2018-11-05 18:51 ` [Qemu-arm] [PATCH v7 01/12] migration: Add post_save function to VMStateDescription Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] " Aaron Lindsay
2018-11-16 14:42 ` [Qemu-arm] " Peter Maydell
2018-11-16 14:42 ` [Qemu-devel] " Peter Maydell
2018-11-16 16:34 ` [Qemu-arm] " Dr. David Alan Gilbert
2018-11-16 16:34 ` [Qemu-devel] " Dr. David Alan Gilbert
2018-11-05 18:51 ` [Qemu-arm] [PATCH v7 02/12] target/arm: Reorganize PMCCNTR accesses Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] " Aaron Lindsay
2018-11-16 14:50 ` [Qemu-arm] " Peter Maydell
2018-11-16 14:50 ` [Qemu-devel] " Peter Maydell
2018-11-16 15:41 ` [Qemu-arm] " Aaron Lindsay
2018-11-16 15:41 ` [Qemu-devel] " Aaron Lindsay
2018-11-05 18:51 ` [Qemu-arm] [PATCH v7 03/12] target/arm: Swap PMU values before/after migrations Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] " Aaron Lindsay
2018-11-16 14:53 ` [Qemu-arm] " Peter Maydell
2018-11-16 14:53 ` [Qemu-devel] " Peter Maydell
2018-11-16 16:09 ` [Qemu-arm] " Aaron Lindsay
2018-11-16 16:09 ` [Qemu-devel] " Aaron Lindsay
2018-11-16 16:44 ` [Qemu-arm] " Peter Maydell
2018-11-16 16:44 ` [Qemu-devel] " Peter Maydell
2018-11-16 21:06 ` [Qemu-arm] " Aaron Lindsay
2018-11-16 21:06 ` [Qemu-devel] " Aaron Lindsay
2018-11-05 18:51 ` Aaron Lindsay [this message]
2018-11-05 18:51 ` [Qemu-devel] [PATCH v7 04/12] target/arm: Filter cycle counter based on PMCCFILTR_EL0 Aaron Lindsay
2018-11-05 18:51 ` [Qemu-arm] [PATCH v7 05/12] target/arm: Allow AArch32 access for PMCCFILTR Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] " Aaron Lindsay
2018-11-05 18:51 ` [Qemu-arm] [PATCH v7 06/12] target/arm: Implement PMOVSSET Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] " Aaron Lindsay
2018-11-05 18:51 ` [Qemu-arm] [PATCH v7 07/12] target/arm: Add array for supported PMU events, generate PMCEID[01] Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] " Aaron Lindsay
2018-11-16 15:06 ` [Qemu-arm] " Peter Maydell
2018-11-16 15:06 ` [Qemu-devel] " Peter Maydell
2018-11-16 20:09 ` [Qemu-arm] " Aaron Lindsay
2018-11-16 20:09 ` [Qemu-devel] " Aaron Lindsay
2018-11-05 18:51 ` [Qemu-arm] [PATCH v7 08/12] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] " Aaron Lindsay
2018-11-05 18:52 ` [Qemu-arm] [PATCH v7 09/12] target/arm: PMU: Add instruction and cycle events Aaron Lindsay
2018-11-05 18:52 ` [Qemu-devel] " Aaron Lindsay
2018-11-05 18:52 ` [Qemu-arm] [PATCH v7 10/12] target/arm: PMU: Set PMCR.N to 4 Aaron Lindsay
2018-11-05 18:52 ` [Qemu-devel] " Aaron Lindsay
2018-11-16 14:59 ` [Qemu-arm] " Peter Maydell
2018-11-16 14:59 ` [Qemu-devel] " Peter Maydell
2018-11-05 18:52 ` [Qemu-arm] [PATCH v7 11/12] target/arm: Implement PMSWINC Aaron Lindsay
2018-11-05 18:52 ` [Qemu-devel] " Aaron Lindsay
2018-11-05 18:52 ` [Qemu-arm] [PATCH v7 12/12] target/arm: Send interrupts on PMU counter overflow Aaron Lindsay
2018-11-05 18:52 ` [Qemu-devel] " Aaron Lindsay
2018-11-16 21:22 ` Aaron Lindsay
2018-11-16 21:22 ` Aaron Lindsay
2018-11-20 14:35 ` [Qemu-arm] " Peter Maydell
2018-11-20 14:35 ` [Qemu-devel] " Peter Maydell
2018-11-06 8:55 ` [Qemu-devel] [PATCH v7 00/12] More fully implement ARM PMUv3 no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181105185046.2802-5-aaron@os.amperecomputing.com \
--to=aaron@os.amperecomputing.com \
--cc=aclindsa@gmail.com \
--cc=alistair.francis@xilinx.com \
--cc=crosthwaite.peter@gmail.com \
--cc=digantd@codeaurora.org \
--cc=mspradli@codeaurora.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=wei@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.