All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] drm/i915: Always write both TILEOFF and LINOFF plane registers
@ 2018-11-08 15:09 Ville Syrjala
  2018-11-08 16:00 ` ✓ Fi.CI.BAT: success for " Patchwork
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Ville Syrjala @ 2018-11-08 15:09 UTC (permalink / raw)
  To: intel-gfx; +Cc: Rodrigo Vivi

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Reduce the clutter in the sprite update functions by writing
both TILEOFF and LINOFF registers unconditionally. We already
did this for primary planes so might as well do it for the
sprites too.

There is no harm in writing both registers. Which one gets
used depends on the tilimg mode selected in the plane control
registers.

It might even make sense to clear the register that won't
get used. That could make register dumps a little easier to
parse. But I'm not sure it's worth the extra hassle.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_sprite.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 1293182dbcb0..06e8845b071d 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -792,7 +792,6 @@ vlv_update_plane(struct intel_plane *plane,
 		 const struct intel_plane_state *plane_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
-	const struct drm_framebuffer *fb = plane_state->base.fb;
 	enum pipe pipe = plane->pipe;
 	enum plane_id plane_id = plane->id;
 	u32 sprctl = plane_state->ctl;
@@ -829,10 +828,8 @@ vlv_update_plane(struct intel_plane *plane,
 		      plane_state->color_plane[0].stride);
 	I915_WRITE_FW(SPPOS(pipe, plane_id), (crtc_y << 16) | crtc_x);
 
-	if (fb->modifier == I915_FORMAT_MOD_X_TILED)
-		I915_WRITE_FW(SPTILEOFF(pipe, plane_id), (y << 16) | x);
-	else
-		I915_WRITE_FW(SPLINOFF(pipe, plane_id), linear_offset);
+	I915_WRITE_FW(SPTILEOFF(pipe, plane_id), (y << 16) | x);
+	I915_WRITE_FW(SPLINOFF(pipe, plane_id), linear_offset);
 
 	I915_WRITE_FW(SPCONSTALPHA(pipe, plane_id), 0);
 
@@ -950,7 +947,6 @@ ivb_update_plane(struct intel_plane *plane,
 		 const struct intel_plane_state *plane_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
-	const struct drm_framebuffer *fb = plane_state->base.fb;
 	enum pipe pipe = plane->pipe;
 	u32 sprctl = plane_state->ctl, sprscale = 0;
 	u32 sprsurf_offset = plane_state->color_plane[0].offset;
@@ -990,12 +986,12 @@ ivb_update_plane(struct intel_plane *plane,
 
 	/* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
 	 * register */
-	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
 		I915_WRITE_FW(SPROFFSET(pipe), (y << 16) | x);
-	else if (fb->modifier == I915_FORMAT_MOD_X_TILED)
+	} else {
 		I915_WRITE_FW(SPRTILEOFF(pipe), (y << 16) | x);
-	else
 		I915_WRITE_FW(SPRLINOFF(pipe), linear_offset);
+	}
 
 	I915_WRITE_FW(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
 	if (IS_IVYBRIDGE(dev_priv))
@@ -1119,7 +1115,6 @@ g4x_update_plane(struct intel_plane *plane,
 		 const struct intel_plane_state *plane_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
-	const struct drm_framebuffer *fb = plane_state->base.fb;
 	enum pipe pipe = plane->pipe;
 	u32 dvscntr = plane_state->ctl, dvsscale = 0;
 	u32 dvssurf_offset = plane_state->color_plane[0].offset;
@@ -1157,10 +1152,8 @@ g4x_update_plane(struct intel_plane *plane,
 	I915_WRITE_FW(DVSSTRIDE(pipe), plane_state->color_plane[0].stride);
 	I915_WRITE_FW(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
 
-	if (fb->modifier == I915_FORMAT_MOD_X_TILED)
-		I915_WRITE_FW(DVSTILEOFF(pipe), (y << 16) | x);
-	else
-		I915_WRITE_FW(DVSLINOFF(pipe), linear_offset);
+	I915_WRITE_FW(DVSTILEOFF(pipe), (y << 16) | x);
+	I915_WRITE_FW(DVSLINOFF(pipe), linear_offset);
 
 	I915_WRITE_FW(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
 	I915_WRITE_FW(DVSSCALE(pipe), dvsscale);
-- 
2.18.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply related	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2018-11-13 16:00 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-11-08 15:09 [PATCH] drm/i915: Always write both TILEOFF and LINOFF plane registers Ville Syrjala
2018-11-08 16:00 ` ✓ Fi.CI.BAT: success for " Patchwork
2018-11-09  1:38 ` ✓ Fi.CI.IGT: " Patchwork
2018-11-13 15:59 ` [PATCH] " Ville Syrjälä

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.