[PATCH AUTOSEL 4.19 01/73] mac80211_hwsim: fix module init error paths for netlink

[PATCH AUTOSEL 4.19 01/73] mac80211_hwsim: fix module init error paths for netlink

[Sasha Levin]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit 05cc09de4c017663a217630682041066f2f9a5cd ]

There is no unregister netlink notifier and family on error paths
in init_mac80211_hwsim(). Also there is an error path where
hwsim_class is not destroyed.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 62759361eb49 ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mac80211_hwsim.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 07442ada6dd0..6532cb25a333 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -3712,16 +3712,16 @@ static int __init init_mac80211_hwsim(void)
 	if (err)
 		goto out_unregister_pernet;
 
+	err = hwsim_init_netlink();
+	if (err)
+		goto out_unregister_driver;
+
 	hwsim_class = class_create(THIS_MODULE, "mac80211_hwsim");
 	if (IS_ERR(hwsim_class)) {
 		err = PTR_ERR(hwsim_class);
-		goto out_unregister_driver;
+		goto out_exit_netlink;
 	}
 
-	err = hwsim_init_netlink();
-	if (err < 0)
-		goto out_unregister_driver;
-
 	for (i = 0; i < radios; i++) {
 		struct hwsim_new_radio_params param = { 0 };
 
@@ -3827,6 +3827,8 @@ static int __init init_mac80211_hwsim(void)
 	free_netdev(hwsim_mon);
 out_free_radios:
 	mac80211_hwsim_free();
+out_exit_netlink:
+	hwsim_exit_netlink();
 out_unregister_driver:
 	platform_driver_unregister(&mac80211_hwsim_driver);
 out_unregister_pernet:
-- 
2.19.1

[PATCH AUTOSEL 4.19 02/73] Input: hyper-v - fix wakeup from suspend-to-idle

[Sasha Levin]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 10f91c73cc41ceead210a905dbd196398e99c7d2 ]

It makes little sense but still possible to put Hyper-V guests into
suspend-to-idle state. To wake them up two wakeup sources were registered
in the past: hyperv-keyboard and hid-hyperv. However, since
commit eed4d47efe95 ("ACPI / sleep: Ignore spurious SCI wakeups from
suspend-to-idle") pm_wakeup_event() from these devices is ignored. Switch
to pm_wakeup_hard_event() API as these devices are actually the only
possible way to wakeup Hyper-V guests.

Fixes: eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle)
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-hyperv.c              | 2 +-
 drivers/input/serio/hyperv-keyboard.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c
index b372854cf38d..704049e62d58 100644
--- a/drivers/hid/hid-hyperv.c
+++ b/drivers/hid/hid-hyperv.c
@@ -309,7 +309,7 @@ static void mousevsc_on_receive(struct hv_device *device,
 		hid_input_report(input_dev->hid_device, HID_INPUT_REPORT,
 				 input_dev->input_buf, len, 1);
 
-		pm_wakeup_event(&input_dev->device->device, 0);
+		pm_wakeup_hard_event(&input_dev->device->device);
 
 		break;
 	default:
diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c
index 47a0e81a2989..a8b9be3e28db 100644
--- a/drivers/input/serio/hyperv-keyboard.c
+++ b/drivers/input/serio/hyperv-keyboard.c
@@ -177,7 +177,7 @@ static void hv_kbd_on_receive(struct hv_device *hv_dev,
 		 * state because the Enter-UP can trigger a wakeup at once.
 		 */
 		if (!(info & IS_BREAK))
-			pm_wakeup_event(&hv_dev->device, 0);
+			pm_wakeup_hard_event(&hv_dev->device);
 
 		break;
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 02/73] Input: hyper-v - fix wakeup from suspend-to-idle

[Sasha Levin]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 10f91c73cc41ceead210a905dbd196398e99c7d2 ]

It makes little sense but still possible to put Hyper-V guests into
suspend-to-idle state. To wake them up two wakeup sources were registered
in the past: hyperv-keyboard and hid-hyperv. However, since
commit eed4d47efe95 ("ACPI / sleep: Ignore spurious SCI wakeups from
suspend-to-idle") pm_wakeup_event() from these devices is ignored. Switch
to pm_wakeup_hard_event() API as these devices are actually the only
possible way to wakeup Hyper-V guests.

Fixes: eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle)
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-hyperv.c              | 2 +-
 drivers/input/serio/hyperv-keyboard.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c
index b372854cf38d..704049e62d58 100644
--- a/drivers/hid/hid-hyperv.c
+++ b/drivers/hid/hid-hyperv.c
@@ -309,7 +309,7 @@ static void mousevsc_on_receive(struct hv_device *device,
 		hid_input_report(input_dev->hid_device, HID_INPUT_REPORT,
 				 input_dev->input_buf, len, 1);
 
-		pm_wakeup_event(&input_dev->device->device, 0);
+		pm_wakeup_hard_event(&input_dev->device->device);
 
 		break;
 	default:
diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c
index 47a0e81a2989..a8b9be3e28db 100644
--- a/drivers/input/serio/hyperv-keyboard.c
+++ b/drivers/input/serio/hyperv-keyboard.c
@@ -177,7 +177,7 @@ static void hv_kbd_on_receive(struct hv_device *hv_dev,
 		 * state because the Enter-UP can trigger a wakeup at once.
 		 */
 		if (!(info & IS_BREAK))
-			pm_wakeup_event(&hv_dev->device, 0);
+			pm_wakeup_hard_event(&hv_dev->device);
 
 		break;
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 03/73] i2c: rcar: check bus state before reinitializing

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 0b57436f15bf40e432487086c4f2d01fd3529393 ]

We should check the bus state before reinitializing the IP core.
Otherwise, the internal bus busy state which also tracks multi-master
activity is lost.

Credits go to the Renesas BSP team for suggesting this change.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: ae481cc13965 ("i2c: rcar: fix resume by always initializing registers before transfer")
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-rcar.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 4aa7dde876f3..254e6219e538 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -779,6 +779,11 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 
 	pm_runtime_get_sync(dev);
 
+	/* Check bus state before init otherwise bus busy info will be lost */
+	ret = rcar_i2c_bus_barrier(priv);
+	if (ret < 0)
+		goto out;
+
 	/* Gen3 needs a reset before allowing RXDMA once */
 	if (priv->devtype == I2C_RCAR_GEN3) {
 		priv->flags |= ID_P_NO_RXDMA;
@@ -791,10 +796,6 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 
 	rcar_i2c_init(priv);
 
-	ret = rcar_i2c_bus_barrier(priv);
-	if (ret < 0)
-		goto out;
-
 	for (i = 0; i < num; i++)
 		rcar_i2c_request_dma(priv, msgs + i);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 04/73] scsi: libiscsi: Fix NULL pointer dereference in iscsi_eh_session_reset

[Sasha Levin]

From: Fred Herard <fred.herard@oracle.com>

[ Upstream commit 5db6dd14b31397e8cccaaddab2ff44ebec1acf25 ]

This commit addresses NULL pointer dereference in iscsi_eh_session_reset.
Reference should not be made to session->leadconn when session->state is
set to ISCSI_STATE_TERMINATE.

Signed-off-by: Fred Herard <fred.herard@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libiscsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 93c66ebad907..f78d2e5c1471 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2416,8 +2416,8 @@ int iscsi_eh_session_reset(struct scsi_cmnd *sc)
 failed:
 		ISCSI_DBG_EH(session,
 			     "failing session reset: Could not log back into "
-			     "%s, %s [age %d]\n", session->targetname,
-			     conn->persistent_address, session->age);
+			     "%s [age %d]\n", session->targetname,
+			     session->age);
 		spin_unlock_bh(&session->frwd_lock);
 		mutex_unlock(&session->eh_mutex);
 		return FAILED;
-- 
2.19.1

[PATCH AUTOSEL 4.19 05/73] scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during unload

[Sasha Levin]

From: Cathy Avery <cavery@redhat.com>

[ Upstream commit 02f425f811cefcc4d325d7a72272651e622dc97e ]

Currently pvscsi_remove calls free_irq more than once as
pvscsi_release_resources and __pvscsi_shutdown both call
pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ'
warning and stack trace. To solve the problem pvscsi_shutdown_intr has been
moved out of pvscsi_release_resources.

Signed-off-by: Cathy Avery <cavery@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/vmw_pvscsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 0cd947f78b5b..890b8aaf95e1 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -1202,8 +1202,6 @@ static void pvscsi_shutdown_intr(struct pvscsi_adapter *adapter)
 
 static void pvscsi_release_resources(struct pvscsi_adapter *adapter)
 {
-	pvscsi_shutdown_intr(adapter);
-
 	if (adapter->workqueue)
 		destroy_workqueue(adapter->workqueue);
 
@@ -1535,6 +1533,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 out_reset_adapter:
 	ll_adapter_reset(adapter);
 out_release_resources:
+	pvscsi_shutdown_intr(adapter);
 	pvscsi_release_resources(adapter);
 	scsi_host_put(host);
 out_disable_device:
@@ -1543,6 +1542,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 
 out_release_resources_and_disable:
+	pvscsi_shutdown_intr(adapter);
 	pvscsi_release_resources(adapter);
 	goto out_disable_device;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 06/73] tools/bpf: fix two test_btf unit test cases

[sashal]

From: Martin KaFai Lau <kafai at fb.com>

[ Upstream commit 8800cd031af085807028656c6ba7eb7908d78262 ]

There are two unit test cases, which should encode
TYPEDEF type, but instead encode PTR type.
The error is flagged out after enforcing name
checking in the previous patch.

Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests")
Signed-off-by: Martin KaFai Lau <kafai at fb.com>
Signed-off-by: Yonghong Song <yhs at fb.com>
Signed-off-by: Alexei Starovoitov <ast at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/bpf/test_btf.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index 6b5cfeb7a9cc..4909aab4d6ab 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -431,11 +431,11 @@ static struct btf_raw_test raw_tests[] = {
 		/* const void* */	/* [3] */
 		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 2),
 		/* typedef const void * const_void_ptr */
-		BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 3),
-		/* struct A { */	/* [4] */
+		BTF_TYPEDEF_ENC(NAME_TBD, 3),	/* [4] */
+		/* struct A { */	/* [5] */
 		BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), sizeof(void *)),
 		/* const_void_ptr m; */
-		BTF_MEMBER_ENC(NAME_TBD, 3, 0),
+		BTF_MEMBER_ENC(NAME_TBD, 4, 0),
 		/* } */
 		BTF_END_RAW,
 	},
@@ -493,10 +493,10 @@ static struct btf_raw_test raw_tests[] = {
 		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), 0),
 		/* const void* */	/* [3] */
 		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 2),
-		/* typedef const void * const_void_ptr */	/* [4] */
-		BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 3),
-		/* const_void_ptr[4] */	/* [5] */
-		BTF_TYPE_ARRAY_ENC(3, 1, 4),
+		/* typedef const void * const_void_ptr */
+		BTF_TYPEDEF_ENC(NAME_TBD, 3),	/* [4] */
+		/* const_void_ptr[4] */
+		BTF_TYPE_ARRAY_ENC(4, 1, 4),	/* [5] */
 		BTF_END_RAW,
 	},
 	.str_sec = "\0const_void_ptr",
-- 
2.19.1

[PATCH AUTOSEL 4.19 06/73] tools/bpf: fix two test_btf unit test cases

[Sasha Levin]

From: Martin KaFai Lau <kafai@fb.com>

[ Upstream commit 8800cd031af085807028656c6ba7eb7908d78262 ]

There are two unit test cases, which should encode
TYPEDEF type, but instead encode PTR type.
The error is flagged out after enforcing name
checking in the previous patch.

Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_btf.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index 6b5cfeb7a9cc..4909aab4d6ab 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -431,11 +431,11 @@ static struct btf_raw_test raw_tests[] = {
 		/* const void* */	/* [3] */
 		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 2),
 		/* typedef const void * const_void_ptr */
-		BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 3),
-		/* struct A { */	/* [4] */
+		BTF_TYPEDEF_ENC(NAME_TBD, 3),	/* [4] */
+		/* struct A { */	/* [5] */
 		BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), sizeof(void *)),
 		/* const_void_ptr m; */
-		BTF_MEMBER_ENC(NAME_TBD, 3, 0),
+		BTF_MEMBER_ENC(NAME_TBD, 4, 0),
 		/* } */
 		BTF_END_RAW,
 	},
@@ -493,10 +493,10 @@ static struct btf_raw_test raw_tests[] = {
 		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), 0),
 		/* const void* */	/* [3] */
 		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 2),
-		/* typedef const void * const_void_ptr */	/* [4] */
-		BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 3),
-		/* const_void_ptr[4] */	/* [5] */
-		BTF_TYPE_ARRAY_ENC(3, 1, 4),
+		/* typedef const void * const_void_ptr */
+		BTF_TYPEDEF_ENC(NAME_TBD, 3),	/* [4] */
+		/* const_void_ptr[4] */
+		BTF_TYPE_ARRAY_ENC(4, 1, 4),	/* [5] */
 		BTF_END_RAW,
 	},
 	.str_sec = "\0const_void_ptr",
-- 
2.19.1

[PATCH AUTOSEL 4.19 06/73] tools/bpf: fix two test_btf unit test cases

[Sasha Levin]

From: Martin KaFai Lau <kafai@fb.com>

[ Upstream commit 8800cd031af085807028656c6ba7eb7908d78262 ]

There are two unit test cases, which should encode
TYPEDEF type, but instead encode PTR type.
The error is flagged out after enforcing name
checking in the previous patch.

Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests")
Signed-off-by: Martin KaFai Lau <kafai at fb.com>
Signed-off-by: Yonghong Song <yhs at fb.com>
Signed-off-by: Alexei Starovoitov <ast at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/bpf/test_btf.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index 6b5cfeb7a9cc..4909aab4d6ab 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -431,11 +431,11 @@ static struct btf_raw_test raw_tests[] = {
 		/* const void* */	/* [3] */
 		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 2),
 		/* typedef const void * const_void_ptr */
-		BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 3),
-		/* struct A { */	/* [4] */
+		BTF_TYPEDEF_ENC(NAME_TBD, 3),	/* [4] */
+		/* struct A { */	/* [5] */
 		BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), sizeof(void *)),
 		/* const_void_ptr m; */
-		BTF_MEMBER_ENC(NAME_TBD, 3, 0),
+		BTF_MEMBER_ENC(NAME_TBD, 4, 0),
 		/* } */
 		BTF_END_RAW,
 	},
@@ -493,10 +493,10 @@ static struct btf_raw_test raw_tests[] = {
 		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), 0),
 		/* const void* */	/* [3] */
 		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 2),
-		/* typedef const void * const_void_ptr */	/* [4] */
-		BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 3),
-		/* const_void_ptr[4] */	/* [5] */
-		BTF_TYPE_ARRAY_ENC(3, 1, 4),
+		/* typedef const void * const_void_ptr */
+		BTF_TYPEDEF_ENC(NAME_TBD, 3),	/* [4] */
+		/* const_void_ptr[4] */
+		BTF_TYPE_ARRAY_ENC(4, 1, 4),	/* [5] */
 		BTF_END_RAW,
 	},
 	.str_sec = "\0const_void_ptr",
-- 
2.19.1

[PATCH AUTOSEL 4.19 07/73] tools/bpf: add addition type tests to test_btf

[sashal]

From: Yonghong Song <yhs at fb.com>

[ Upstream commit d08489125e04a9f73d9323caea43270fd22d395f ]

The following additional unit testcases are added to test_btf:
...
BTF raw test[42] (typedef (invalid name, name_off = 0)): OK
BTF raw test[43] (typedef (invalid name, invalid identifier)): OK
BTF raw test[44] (ptr type (invalid name, name_off <> 0)): OK
BTF raw test[45] (volatile type (invalid name, name_off <> 0)): OK
BTF raw test[46] (const type (invalid name, name_off <> 0)): OK
BTF raw test[47] (restrict type (invalid name, name_off <> 0)): OK
BTF raw test[48] (fwd type (invalid name, name_off = 0)): OK
BTF raw test[49] (fwd type (invalid name, invalid identifier)): OK
BTF raw test[50] (array type (invalid name, name_off <> 0)): OK
BTF raw test[51] (struct type (name_off = 0)): OK
BTF raw test[52] (struct type (invalid name, invalid identifier)): OK
BTF raw test[53] (struct member (name_off = 0)): OK
BTF raw test[54] (struct member (invalid name, invalid identifier)): OK
BTF raw test[55] (enum type (name_off = 0)): OK
BTF raw test[56] (enum type (invalid name, invalid identifier)): OK
BTF raw test[57] (enum member (invalid name, name_off = 0)): OK
BTF raw test[58] (enum member (invalid name, invalid identifier)): OK
...

Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests")
Acked-by: Martin KaFai Lau <kafai at fb.com>
Signed-off-by: Yonghong Song <yhs at fb.com>
Signed-off-by: Alexei Starovoitov <ast at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/bpf/test_btf.c | 361 +++++++++++++++++++++++++
 1 file changed, 361 insertions(+)

diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index 4909aab4d6ab..29116366a9fc 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -1291,6 +1291,367 @@ static struct btf_raw_test raw_tests[] = {
 	.err_str = "type != 0",
 },
 
+{
+	.descr = "typedef (invalid name, name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),	/* [1] */
+		BTF_TYPEDEF_ENC(0, 1),				/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "typedef_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "typedef (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),	/* [1] */
+		BTF_TYPEDEF_ENC(NAME_TBD, 1),			/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__!int",
+	.str_sec_size = sizeof("\0__!int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "typedef_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "ptr type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 1),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "ptr_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "volatile type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_VOLATILE, 0, 0), 1),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "volatile_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "const type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), 1),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "const_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "restrict type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 1),	/* [2] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_RESTRICT, 0, 0), 2),	/* [3] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "restrict_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "fwd type (invalid name, name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_FWD, 0, 0), 0),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__skb",
+	.str_sec_size = sizeof("\0__skb"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "fwd_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "fwd type (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_FWD, 0, 0), 0),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__!skb",
+	.str_sec_size = sizeof("\0__!skb"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "fwd_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "array type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_ARRAY, 0, 0), 0),	/* [2] */
+		BTF_ARRAY_ENC(1, 1, 4),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__skb",
+	.str_sec_size = sizeof("\0__skb"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "array_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "struct type (name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A",
+	.str_sec_size = sizeof("\0A"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+},
+
+{
+	.descr = "struct type (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A!\0B",
+	.str_sec_size = sizeof("\0A!\0B"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "struct member (name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A",
+	.str_sec_size = sizeof("\0A"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+},
+
+{
+	.descr = "struct member (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A\0B*",
+	.str_sec_size = sizeof("\0A\0B*"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "enum type (name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(NAME_TBD, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A\0B",
+	.str_sec_size = sizeof("\0A\0B"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+},
+
+{
+	.descr = "enum type (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(NAME_TBD, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A!\0B",
+	.str_sec_size = sizeof("\0A!\0B"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "enum member (invalid name, name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(0, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "",
+	.str_sec_size = sizeof(""),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "enum member (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(NAME_TBD, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A!",
+	.str_sec_size = sizeof("\0A!"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
 {
 	.descr = "arraymap invalid btf key (a bit field)",
 	.raw_types = {
-- 
2.19.1

[PATCH AUTOSEL 4.19 07/73] tools/bpf: add addition type tests to test_btf

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit d08489125e04a9f73d9323caea43270fd22d395f ]

The following additional unit testcases are added to test_btf:
...
BTF raw test[42] (typedef (invalid name, name_off = 0)): OK
BTF raw test[43] (typedef (invalid name, invalid identifier)): OK
BTF raw test[44] (ptr type (invalid name, name_off <> 0)): OK
BTF raw test[45] (volatile type (invalid name, name_off <> 0)): OK
BTF raw test[46] (const type (invalid name, name_off <> 0)): OK
BTF raw test[47] (restrict type (invalid name, name_off <> 0)): OK
BTF raw test[48] (fwd type (invalid name, name_off = 0)): OK
BTF raw test[49] (fwd type (invalid name, invalid identifier)): OK
BTF raw test[50] (array type (invalid name, name_off <> 0)): OK
BTF raw test[51] (struct type (name_off = 0)): OK
BTF raw test[52] (struct type (invalid name, invalid identifier)): OK
BTF raw test[53] (struct member (name_off = 0)): OK
BTF raw test[54] (struct member (invalid name, invalid identifier)): OK
BTF raw test[55] (enum type (name_off = 0)): OK
BTF raw test[56] (enum type (invalid name, invalid identifier)): OK
BTF raw test[57] (enum member (invalid name, name_off = 0)): OK
BTF raw test[58] (enum member (invalid name, invalid identifier)): OK
...

Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_btf.c | 361 +++++++++++++++++++++++++
 1 file changed, 361 insertions(+)

diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index 4909aab4d6ab..29116366a9fc 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -1291,6 +1291,367 @@ static struct btf_raw_test raw_tests[] = {
 	.err_str = "type != 0",
 },
 
+{
+	.descr = "typedef (invalid name, name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),	/* [1] */
+		BTF_TYPEDEF_ENC(0, 1),				/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "typedef_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "typedef (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),	/* [1] */
+		BTF_TYPEDEF_ENC(NAME_TBD, 1),			/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__!int",
+	.str_sec_size = sizeof("\0__!int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "typedef_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "ptr type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 1),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "ptr_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "volatile type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_VOLATILE, 0, 0), 1),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "volatile_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "const type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), 1),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "const_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "restrict type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 1),	/* [2] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_RESTRICT, 0, 0), 2),	/* [3] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "restrict_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "fwd type (invalid name, name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_FWD, 0, 0), 0),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__skb",
+	.str_sec_size = sizeof("\0__skb"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "fwd_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "fwd type (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_FWD, 0, 0), 0),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__!skb",
+	.str_sec_size = sizeof("\0__!skb"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "fwd_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "array type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_ARRAY, 0, 0), 0),	/* [2] */
+		BTF_ARRAY_ENC(1, 1, 4),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__skb",
+	.str_sec_size = sizeof("\0__skb"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "array_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "struct type (name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A",
+	.str_sec_size = sizeof("\0A"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+},
+
+{
+	.descr = "struct type (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A!\0B",
+	.str_sec_size = sizeof("\0A!\0B"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "struct member (name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A",
+	.str_sec_size = sizeof("\0A"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+},
+
+{
+	.descr = "struct member (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A\0B*",
+	.str_sec_size = sizeof("\0A\0B*"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "enum type (name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(NAME_TBD, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A\0B",
+	.str_sec_size = sizeof("\0A\0B"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+},
+
+{
+	.descr = "enum type (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(NAME_TBD, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A!\0B",
+	.str_sec_size = sizeof("\0A!\0B"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "enum member (invalid name, name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(0, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "",
+	.str_sec_size = sizeof(""),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "enum member (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(NAME_TBD, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A!",
+	.str_sec_size = sizeof("\0A!"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
 {
 	.descr = "arraymap invalid btf key (a bit field)",
 	.raw_types = {
-- 
2.19.1

[PATCH AUTOSEL 4.19 07/73] tools/bpf: add addition type tests to test_btf

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit d08489125e04a9f73d9323caea43270fd22d395f ]

The following additional unit testcases are added to test_btf:
...
BTF raw test[42] (typedef (invalid name, name_off = 0)): OK
BTF raw test[43] (typedef (invalid name, invalid identifier)): OK
BTF raw test[44] (ptr type (invalid name, name_off <> 0)): OK
BTF raw test[45] (volatile type (invalid name, name_off <> 0)): OK
BTF raw test[46] (const type (invalid name, name_off <> 0)): OK
BTF raw test[47] (restrict type (invalid name, name_off <> 0)): OK
BTF raw test[48] (fwd type (invalid name, name_off = 0)): OK
BTF raw test[49] (fwd type (invalid name, invalid identifier)): OK
BTF raw test[50] (array type (invalid name, name_off <> 0)): OK
BTF raw test[51] (struct type (name_off = 0)): OK
BTF raw test[52] (struct type (invalid name, invalid identifier)): OK
BTF raw test[53] (struct member (name_off = 0)): OK
BTF raw test[54] (struct member (invalid name, invalid identifier)): OK
BTF raw test[55] (enum type (name_off = 0)): OK
BTF raw test[56] (enum type (invalid name, invalid identifier)): OK
BTF raw test[57] (enum member (invalid name, name_off = 0)): OK
BTF raw test[58] (enum member (invalid name, invalid identifier)): OK
...

Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests")
Acked-by: Martin KaFai Lau <kafai at fb.com>
Signed-off-by: Yonghong Song <yhs at fb.com>
Signed-off-by: Alexei Starovoitov <ast at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/bpf/test_btf.c | 361 +++++++++++++++++++++++++
 1 file changed, 361 insertions(+)

diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index 4909aab4d6ab..29116366a9fc 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -1291,6 +1291,367 @@ static struct btf_raw_test raw_tests[] = {
 	.err_str = "type != 0",
 },
 
+{
+	.descr = "typedef (invalid name, name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),	/* [1] */
+		BTF_TYPEDEF_ENC(0, 1),				/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "typedef_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "typedef (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),	/* [1] */
+		BTF_TYPEDEF_ENC(NAME_TBD, 1),			/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__!int",
+	.str_sec_size = sizeof("\0__!int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "typedef_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "ptr type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 1),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "ptr_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "volatile type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_VOLATILE, 0, 0), 1),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "volatile_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "const type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), 1),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "const_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "restrict type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 1),	/* [2] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_RESTRICT, 0, 0), 2),	/* [3] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__int",
+	.str_sec_size = sizeof("\0__int"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "restrict_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "fwd type (invalid name, name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_FWD, 0, 0), 0),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__skb",
+	.str_sec_size = sizeof("\0__skb"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "fwd_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "fwd type (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_FWD, 0, 0), 0),	/* [2] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__!skb",
+	.str_sec_size = sizeof("\0__!skb"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "fwd_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "array type (invalid name, name_off <> 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_ARRAY, 0, 0), 0),	/* [2] */
+		BTF_ARRAY_ENC(1, 1, 4),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0__skb",
+	.str_sec_size = sizeof("\0__skb"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "array_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "struct type (name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A",
+	.str_sec_size = sizeof("\0A"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+},
+
+{
+	.descr = "struct type (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A!\0B",
+	.str_sec_size = sizeof("\0A!\0B"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "struct member (name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A",
+	.str_sec_size = sizeof("\0A"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+},
+
+{
+	.descr = "struct member (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 1), 4),	/* [2] */
+		BTF_MEMBER_ENC(NAME_TBD, 1, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A\0B*",
+	.str_sec_size = sizeof("\0A\0B*"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "struct_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "enum type (name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(NAME_TBD, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A\0B",
+	.str_sec_size = sizeof("\0A\0B"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+},
+
+{
+	.descr = "enum type (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(NAME_TBD,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(NAME_TBD, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A!\0B",
+	.str_sec_size = sizeof("\0A!\0B"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "enum member (invalid name, name_off = 0)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(0, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "",
+	.str_sec_size = sizeof(""),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
+
+{
+	.descr = "enum member (invalid name, invalid identifier)",
+	.raw_types = {
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),		/* [1] */
+		BTF_TYPE_ENC(0,
+			     BTF_INFO_ENC(BTF_KIND_ENUM, 0, 1),
+			     sizeof(int)),				/* [2] */
+		BTF_ENUM_ENC(NAME_TBD, 0),
+		BTF_END_RAW,
+	},
+	.str_sec = "\0A!",
+	.str_sec_size = sizeof("\0A!"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "enum_type_check_btf",
+	.key_size = sizeof(int),
+	.value_size = sizeof(int),
+	.key_type_id = 1,
+	.value_type_id = 1,
+	.max_entries = 4,
+	.btf_load_err = true,
+	.err_str = "Invalid name",
+},
 {
 	.descr = "arraymap invalid btf key (a bit field)",
 	.raw_types = {
-- 
2.19.1

[PATCH AUTOSEL 4.19 08/73] net: ethernet: ave: Replace NET_IP_ALIGN with AVE_FRAME_HEADROOM

[Sasha Levin]

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit 88113957ddb7b7d5451e28cd708c82ea7e63b097 ]

In commit 26a4676faa1a ("arm64: mm: define NET_IP_ALIGN to 0"),
AVE controller affects this modification because the controller forces
to ignore lower 2bits of buffer start address, and make 2-byte headroom,
that is, data reception starts from (buffer + 2).

This patch defines AVE_FRAME_HEADROOM macro as hardware-specific value,
and replaces NET_IP_ALIGN with it.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/socionext/sni_ave.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c
index f7ecceeb1e28..f27d67a4d304 100644
--- a/drivers/net/ethernet/socionext/sni_ave.c
+++ b/drivers/net/ethernet/socionext/sni_ave.c
@@ -194,6 +194,7 @@
 
 /* Parameter for ethernet frame */
 #define AVE_MAX_ETHFRAME	1518
+#define AVE_FRAME_HEADROOM	2
 
 /* Parameter for interrupt */
 #define AVE_INTM_COUNT		20
@@ -585,12 +586,13 @@ static int ave_rxdesc_prepare(struct net_device *ndev, int entry)
 
 	skb = priv->rx.desc[entry].skbs;
 	if (!skb) {
-		skb = netdev_alloc_skb_ip_align(ndev,
-						AVE_MAX_ETHFRAME);
+		skb = netdev_alloc_skb(ndev, AVE_MAX_ETHFRAME);
 		if (!skb) {
 			netdev_err(ndev, "can't allocate skb for Rx\n");
 			return -ENOMEM;
 		}
+		skb->data += AVE_FRAME_HEADROOM;
+		skb->tail += AVE_FRAME_HEADROOM;
 	}
 
 	/* set disable to cmdsts */
@@ -603,12 +605,12 @@ static int ave_rxdesc_prepare(struct net_device *ndev, int entry)
 	 * - Rx buffer begins with 2 byte headroom, and data will be put from
 	 *   (buffer + 2).
 	 * To satisfy this, specify the address to put back the buffer
-	 * pointer advanced by NET_IP_ALIGN by netdev_alloc_skb_ip_align(),
-	 * and expand the map size by NET_IP_ALIGN.
+	 * pointer advanced by AVE_FRAME_HEADROOM, and expand the map size
+	 * by AVE_FRAME_HEADROOM.
 	 */
 	ret = ave_dma_map(ndev, &priv->rx.desc[entry],
-			  skb->data - NET_IP_ALIGN,
-			  AVE_MAX_ETHFRAME + NET_IP_ALIGN,
+			  skb->data - AVE_FRAME_HEADROOM,
+			  AVE_MAX_ETHFRAME + AVE_FRAME_HEADROOM,
 			  DMA_FROM_DEVICE, &paddr);
 	if (ret) {
 		netdev_err(ndev, "can't map skb for Rx\n");
-- 
2.19.1

[PATCH AUTOSEL 4.19 09/73] net: phy: sfp: correct store of detected link modes

[Sasha Levin]

From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit d7f7e0018b96fd1a30a968faa9464eb57372c1ec ]

The link modes that sfp_parse_support() detects are stored in the
'modes' bitmap. There is no reason to make an exception for 1000Base-PX
or 1000Base-BX10.

Fixes: 03145864bd0f ("sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/sfp-bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 83060fb349f4..ad9db652874d 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -162,7 +162,7 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 	/* 1000Base-PX or 1000Base-BX10 */
 	if ((id->base.e_base_px || id->base.e_base_bx10) &&
 	    br_min <= 1300 && br_max >= 1200)
-		phylink_set(support, 1000baseX_Full);
+		phylink_set(modes, 1000baseX_Full);
 
 	/* For active or passive cables, select the link modes
 	 * based on the bit rates and the cable compliance bytes.
-- 
2.19.1

[PATCH AUTOSEL 4.19 10/73] drm/amd/display: Fix 6x4K displays light-up on Vega20 (v2)

[Sasha Levin]

From: Roman Li <Roman.Li@amd.com>

[ Upstream commit c6888879fd55b1ba903c2a770127edbf6aef6f27 ]

[Why]
More than 4x4K didn't lightup on Vega20 due to low dcfclk value.
Powerplay expects valid min requirement for dcfclk from DC.

[How]
Update min_dcfclock_khz based on min_engine_clock value.

v2: backport to 4.20 (Alex)

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index b2f308766a9e..0941f3c689bc 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -2530,6 +2530,8 @@ static void pplib_apply_display_requirements(
 			dc,
 			context->bw.dce.sclk_khz);
 
+	pp_display_cfg->min_dcfclock_khz = pp_display_cfg->min_engine_clock_khz;
+
 	pp_display_cfg->min_engine_clock_deep_sleep_khz
 			= context->bw.dce.sclk_deep_sleep_khz;
 
-- 
2.19.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.19 10/73] drm/amd/display: Fix 6x4K displays light-up on Vega20 (v2)

[Sasha Levin]

From: Roman Li <Roman.Li@amd.com>

[ Upstream commit c6888879fd55b1ba903c2a770127edbf6aef6f27 ]

[Why]
More than 4x4K didn't lightup on Vega20 due to low dcfclk value.
Powerplay expects valid min requirement for dcfclk from DC.

[How]
Update min_dcfclock_khz based on min_engine_clock value.

v2: backport to 4.20 (Alex)

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index b2f308766a9e..0941f3c689bc 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -2530,6 +2530,8 @@ static void pplib_apply_display_requirements(
 			dc,
 			context->bw.dce.sclk_khz);
 
+	pp_display_cfg->min_dcfclock_khz = pp_display_cfg->min_engine_clock_khz;
+
 	pp_display_cfg->min_engine_clock_deep_sleep_khz
 			= context->bw.dce.sclk_deep_sleep_khz;
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 18/73] drm/amdgpu: wait for IB test on first device open

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 3bfa8897e4d08f822d1d58cf6cbbffbccef82e08 ]

Instead of delaying that to the first query. Otherwise we could try to use the
SDMA for VM updates before the IB tests are done.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index bd98cc5fb97b..fd825d30edf1 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -292,9 +292,6 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file
 	if (!info->return_size || !info->return_pointer)
 		return -EINVAL;
 
-	/* Ensure IB tests are run on ring */
-	flush_delayed_work(&adev->late_init_work);
-
 	switch (info->query) {
 	case AMDGPU_INFO_ACCEL_WORKING:
 		ui32 = adev->accel_working;
@@ -861,6 +858,9 @@ int amdgpu_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 	struct amdgpu_fpriv *fpriv;
 	int r, pasid;
 
+	/* Ensure IB tests are run on ring */
+	flush_delayed_work(&adev->late_init_work);
+
 	file_priv->driver_priv = NULL;
 
 	r = pm_runtime_get_sync(dev->dev);
-- 
2.19.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.19 18/73] drm/amdgpu: wait for IB test on first device open

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 3bfa8897e4d08f822d1d58cf6cbbffbccef82e08 ]

Instead of delaying that to the first query. Otherwise we could try to use the
SDMA for VM updates before the IB tests are done.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index bd98cc5fb97b..fd825d30edf1 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -292,9 +292,6 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file
 	if (!info->return_size || !info->return_pointer)
 		return -EINVAL;
 
-	/* Ensure IB tests are run on ring */
-	flush_delayed_work(&adev->late_init_work);
-
 	switch (info->query) {
 	case AMDGPU_INFO_ACCEL_WORKING:
 		ui32 = adev->accel_working;
@@ -861,6 +858,9 @@ int amdgpu_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 	struct amdgpu_fpriv *fpriv;
 	int r, pasid;
 
+	/* Ensure IB tests are run on ring */
+	flush_delayed_work(&adev->late_init_work);
+
 	file_priv->driver_priv = NULL;
 
 	r = pm_runtime_get_sync(dev->dev);
-- 
2.19.1

[PATCH AUTOSEL 4.19 36/73] drm/amd/powerplay: issue pre-display settings for display change event

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 10cb3e6b63bf4266a5198813526fdd7259ffb8be ]

For display config change event only, pre-display config settings are
needed.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c  | 3 +++
 drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c | 2 --
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c
index 8994aa5c8cf8..64596029b696 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c
@@ -365,6 +365,9 @@ int hwmgr_handle_task(struct pp_hwmgr *hwmgr, enum amd_pp_task task_id,
 
 	switch (task_id) {
 	case AMD_PP_TASK_DISPLAY_CONFIG_CHANGE:
+		ret = phm_pre_display_configuration_changed(hwmgr);
+		if (ret)
+			return ret;
 		ret = phm_set_cpu_power_state(hwmgr);
 		if (ret)
 			return ret;
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c
index 91ffb7bc4ee7..56437866d120 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c
@@ -265,8 +265,6 @@ int psm_adjust_power_state_dynamic(struct pp_hwmgr *hwmgr, bool skip,
 	if (skip)
 		return 0;
 
-	phm_pre_display_configuration_changed(hwmgr);
-
 	phm_display_configuration_changed(hwmgr);
 
 	if (hwmgr->ps)
-- 
2.19.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.19 36/73] drm/amd/powerplay: issue pre-display settings for display change event

[Sasha Levin]

From: Evan Quan <evan.quan@amd.com>

[ Upstream commit 10cb3e6b63bf4266a5198813526fdd7259ffb8be ]

For display config change event only, pre-display config settings are
needed.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c  | 3 +++
 drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c | 2 --
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c
index 8994aa5c8cf8..64596029b696 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c
@@ -365,6 +365,9 @@ int hwmgr_handle_task(struct pp_hwmgr *hwmgr, enum amd_pp_task task_id,
 
 	switch (task_id) {
 	case AMD_PP_TASK_DISPLAY_CONFIG_CHANGE:
+		ret = phm_pre_display_configuration_changed(hwmgr);
+		if (ret)
+			return ret;
 		ret = phm_set_cpu_power_state(hwmgr);
 		if (ret)
 			return ret;
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c
index 91ffb7bc4ee7..56437866d120 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/pp_psm.c
@@ -265,8 +265,6 @@ int psm_adjust_power_state_dynamic(struct pp_hwmgr *hwmgr, bool skip,
 	if (skip)
 		return 0;
 
-	phm_pre_display_configuration_changed(hwmgr);
-
 	phm_display_configuration_changed(hwmgr);
 
 	if (hwmgr->ps)
-- 
2.19.1

[PATCH AUTOSEL 4.19 11/73] x86/earlyprintk/efi: Fix infinite loop on some screen widths

[Sasha Levin]

From: YiFei Zhu <zhuyifei1999@gmail.com>

[ Upstream commit 79c2206d369b87b19ac29cb47601059b6bf5c291 ]

An affected screen resolution is 1366 x 768, which width is not
divisible by 8, the default font width. On such screens, when longer
lines are earlyprintk'ed, overflow-to-next-line can never trigger,
due to the left-most x-coordinate of the next character always less
than the screen width. Earlyprintk will infinite loop in trying to
print the rest of the string but unable to, due to the line being
full.

This patch makes the trigger consider the right-most x-coordinate,
instead of left-most, as the value to compare against the screen
width threshold.

Signed-off-by: YiFei Zhu <zhuyifei1999@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/early_printk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c
index 5fdacb322ceb..c3e6be110b7d 100644
--- a/arch/x86/platform/efi/early_printk.c
+++ b/arch/x86/platform/efi/early_printk.c
@@ -179,7 +179,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num)
 			num--;
 		}
 
-		if (efi_x >= si->lfb_width) {
+		if (efi_x + font->width > si->lfb_width) {
 			efi_x = 0;
 			efi_y += font->height;
 		}
-- 
2.19.1

[PATCH AUTOSEL 4.19 11/73] x86/earlyprintk/efi: Fix infinite loop on some screen widths

[Sasha Levin]

From: YiFei Zhu <zhuyifei1999@gmail.com>

[ Upstream commit 79c2206d369b87b19ac29cb47601059b6bf5c291 ]

An affected screen resolution is 1366 x 768, which width is not
divisible by 8, the default font width. On such screens, when longer
lines are earlyprintk'ed, overflow-to-next-line can never trigger,
due to the left-most x-coordinate of the next character always less
than the screen width. Earlyprintk will infinite loop in trying to
print the rest of the string but unable to, due to the line being
full.

This patch makes the trigger consider the right-most x-coordinate,
instead of left-most, as the value to compare against the screen
width threshold.

Signed-off-by: YiFei Zhu <zhuyifei1999@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/early_printk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c
index 5fdacb322ceb..c3e6be110b7d 100644
--- a/arch/x86/platform/efi/early_printk.c
+++ b/arch/x86/platform/efi/early_printk.c
@@ -179,7 +179,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num)
 			num--;
 		}
 
-		if (efi_x >= si->lfb_width) {
+		if (efi_x + font->width > si->lfb_width) {
 			efi_x = 0;
 			efi_y += font->height;
 		}
-- 
2.19.1

[PATCH AUTOSEL 4.19 12/73] drm/msm: Fix task dump in gpu recovery

[Sasha Levin]

From: Sharat Masetty <smasetty@codeaurora.org>

[ Upstream commit 482f96324a4e08818db7d75bb12beaaea6c9561d ]

The current recovery code gets a pointer to the task struct and does a
few things all within the rcu_read_lock. This puts constraints on the
types of gfp flags that can be used within the rcu lock. This patch
instead gets a reference to the task within the rcu lock and releases
the lock immediately, this way the task stays afloat until we need it and
we also get to use the desired gfp flags.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_gpu.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c
index 46e6b82f7b66..52a2146dc1f2 100644
--- a/drivers/gpu/drm/msm/msm_gpu.c
+++ b/drivers/gpu/drm/msm/msm_gpu.c
@@ -425,10 +425,9 @@ static void recover_worker(struct work_struct *work)
 	if (submit) {
 		struct task_struct *task;
 
-		rcu_read_lock();
-		task = pid_task(submit->pid, PIDTYPE_PID);
+		task = get_pid_task(submit->pid, PIDTYPE_PID);
 		if (task) {
-			comm = kstrdup(task->comm, GFP_ATOMIC);
+			comm = kstrdup(task->comm, GFP_KERNEL);
 
 			/*
 			 * So slightly annoying, in other paths like
@@ -441,10 +440,10 @@ static void recover_worker(struct work_struct *work)
 			 * about the submit going away.
 			 */
 			mutex_unlock(&dev->struct_mutex);
-			cmd = kstrdup_quotable_cmdline(task, GFP_ATOMIC);
+			cmd = kstrdup_quotable_cmdline(task, GFP_KERNEL);
+			put_task_struct(task);
 			mutex_lock(&dev->struct_mutex);
 		}
-		rcu_read_unlock();
 
 		if (comm && cmd) {
 			dev_err(dev->dev, "%s: offending task: %s (%s)\n",
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 12/73] drm/msm: Fix task dump in gpu recovery

[Sasha Levin]

From: Sharat Masetty <smasetty@codeaurora.org>

[ Upstream commit 482f96324a4e08818db7d75bb12beaaea6c9561d ]

The current recovery code gets a pointer to the task struct and does a
few things all within the rcu_read_lock. This puts constraints on the
types of gfp flags that can be used within the rcu lock. This patch
instead gets a reference to the task within the rcu lock and releases
the lock immediately, this way the task stays afloat until we need it and
we also get to use the desired gfp flags.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_gpu.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c
index 46e6b82f7b66..52a2146dc1f2 100644
--- a/drivers/gpu/drm/msm/msm_gpu.c
+++ b/drivers/gpu/drm/msm/msm_gpu.c
@@ -425,10 +425,9 @@ static void recover_worker(struct work_struct *work)
 	if (submit) {
 		struct task_struct *task;
 
-		rcu_read_lock();
-		task = pid_task(submit->pid, PIDTYPE_PID);
+		task = get_pid_task(submit->pid, PIDTYPE_PID);
 		if (task) {
-			comm = kstrdup(task->comm, GFP_ATOMIC);
+			comm = kstrdup(task->comm, GFP_KERNEL);
 
 			/*
 			 * So slightly annoying, in other paths like
@@ -441,10 +440,10 @@ static void recover_worker(struct work_struct *work)
 			 * about the submit going away.
 			 */
 			mutex_unlock(&dev->struct_mutex);
-			cmd = kstrdup_quotable_cmdline(task, GFP_ATOMIC);
+			cmd = kstrdup_quotable_cmdline(task, GFP_KERNEL);
+			put_task_struct(task);
 			mutex_lock(&dev->struct_mutex);
 		}
-		rcu_read_unlock();
 
 		if (comm && cmd) {
 			dev_err(dev->dev, "%s: offending task: %s (%s)\n",
-- 
2.19.1

[PATCH AUTOSEL 4.19 13/73] drm/msm/gpu: Fix a couple memory leaks in debugfs

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 51270de91412b819f654b849db3bf92dac0a0855 ]

The msm_gpu_open() function should free "show_priv" on error or it
causes static checker warnings.

Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_debugfs.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_debugfs.c b/drivers/gpu/drm/msm/msm_debugfs.c
index f0da0d3c8a80..d756436c1fcd 100644
--- a/drivers/gpu/drm/msm/msm_debugfs.c
+++ b/drivers/gpu/drm/msm/msm_debugfs.c
@@ -84,7 +84,7 @@ static int msm_gpu_open(struct inode *inode, struct file *file)
 
 	ret = mutex_lock_interruptible(&dev->struct_mutex);
 	if (ret)
-		return ret;
+		goto free_priv;
 
 	pm_runtime_get_sync(&gpu->pdev->dev);
 	show_priv->state = gpu->funcs->gpu_state_get(gpu);
@@ -94,13 +94,20 @@ static int msm_gpu_open(struct inode *inode, struct file *file)
 
 	if (IS_ERR(show_priv->state)) {
 		ret = PTR_ERR(show_priv->state);
-		kfree(show_priv);
-		return ret;
+		goto free_priv;
 	}
 
 	show_priv->dev = dev;
 
-	return single_open(file, msm_gpu_show, show_priv);
+	ret = single_open(file, msm_gpu_show, show_priv);
+	if (ret)
+		goto free_priv;
+
+	return 0;
+
+free_priv:
+	kfree(show_priv);
+	return ret;
 }
 
 static const struct file_operations msm_gpu_fops = {
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 13/73] drm/msm/gpu: Fix a couple memory leaks in debugfs

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 51270de91412b819f654b849db3bf92dac0a0855 ]

The msm_gpu_open() function should free "show_priv" on error or it
causes static checker warnings.

Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_debugfs.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_debugfs.c b/drivers/gpu/drm/msm/msm_debugfs.c
index f0da0d3c8a80..d756436c1fcd 100644
--- a/drivers/gpu/drm/msm/msm_debugfs.c
+++ b/drivers/gpu/drm/msm/msm_debugfs.c
@@ -84,7 +84,7 @@ static int msm_gpu_open(struct inode *inode, struct file *file)
 
 	ret = mutex_lock_interruptible(&dev->struct_mutex);
 	if (ret)
-		return ret;
+		goto free_priv;
 
 	pm_runtime_get_sync(&gpu->pdev->dev);
 	show_priv->state = gpu->funcs->gpu_state_get(gpu);
@@ -94,13 +94,20 @@ static int msm_gpu_open(struct inode *inode, struct file *file)
 
 	if (IS_ERR(show_priv->state)) {
 		ret = PTR_ERR(show_priv->state);
-		kfree(show_priv);
-		return ret;
+		goto free_priv;
 	}
 
 	show_priv->dev = dev;
 
-	return single_open(file, msm_gpu_show, show_priv);
+	ret = single_open(file, msm_gpu_show, show_priv);
+	if (ret)
+		goto free_priv;
+
+	return 0;
+
+free_priv:
+	kfree(show_priv);
+	return ret;
 }
 
 static const struct file_operations msm_gpu_fops = {
-- 
2.19.1

[PATCH AUTOSEL 4.19 14/73] drm/msm: fix handling of cmdstream offset

[Sasha Levin]

From: Rob Clark <robdclark@gmail.com>

[ Upstream commit 47e7f506ee6590ceb2efa1f08aca7f9f2ee5c1d3 ]

Userspace hasn't used submit cmds with submit_offset != 0 for a while,
but this starts cropping up again with cmdstream sub-buffer-allocation
in libdrm_freedreno.

Doesn't do much good to increment the buf ptr before assigning it.

Fixes: 78b8e5b847b4 drm/msm: dump a rd GPUADDR header for all buffers in the command
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_rd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_rd.c b/drivers/gpu/drm/msm/msm_rd.c
index 3aa8a8576abe..f7a0edea4705 100644
--- a/drivers/gpu/drm/msm/msm_rd.c
+++ b/drivers/gpu/drm/msm/msm_rd.c
@@ -316,10 +316,11 @@ static void snapshot_buf(struct msm_rd_state *rd,
 		uint64_t iova, uint32_t size)
 {
 	struct msm_gem_object *obj = submit->bos[idx].obj;
+	unsigned offset = 0;
 	const char *buf;
 
 	if (iova) {
-		buf += iova - submit->bos[idx].iova;
+		offset = iova - submit->bos[idx].iova;
 	} else {
 		iova = submit->bos[idx].iova;
 		size = obj->base.size;
@@ -340,6 +341,8 @@ static void snapshot_buf(struct msm_rd_state *rd,
 	if (IS_ERR(buf))
 		return;
 
+	buf += offset;
+
 	rd_write_section(rd, RD_BUFFER_CONTENTS, buf, size);
 
 	msm_gem_put_vaddr(&obj->base);
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 14/73] drm/msm: fix handling of cmdstream offset

[Sasha Levin]

From: Rob Clark <robdclark@gmail.com>

[ Upstream commit 47e7f506ee6590ceb2efa1f08aca7f9f2ee5c1d3 ]

Userspace hasn't used submit cmds with submit_offset != 0 for a while,
but this starts cropping up again with cmdstream sub-buffer-allocation
in libdrm_freedreno.

Doesn't do much good to increment the buf ptr before assigning it.

Fixes: 78b8e5b847b4 drm/msm: dump a rd GPUADDR header for all buffers in the command
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_rd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_rd.c b/drivers/gpu/drm/msm/msm_rd.c
index 3aa8a8576abe..f7a0edea4705 100644
--- a/drivers/gpu/drm/msm/msm_rd.c
+++ b/drivers/gpu/drm/msm/msm_rd.c
@@ -316,10 +316,11 @@ static void snapshot_buf(struct msm_rd_state *rd,
 		uint64_t iova, uint32_t size)
 {
 	struct msm_gem_object *obj = submit->bos[idx].obj;
+	unsigned offset = 0;
 	const char *buf;
 
 	if (iova) {
-		buf += iova - submit->bos[idx].iova;
+		offset = iova - submit->bos[idx].iova;
 	} else {
 		iova = submit->bos[idx].iova;
 		size = obj->base.size;
@@ -340,6 +341,8 @@ static void snapshot_buf(struct msm_rd_state *rd,
 	if (IS_ERR(buf))
 		return;
 
+	buf += offset;
+
 	rd_write_section(rd, RD_BUFFER_CONTENTS, buf, size);
 
 	msm_gem_put_vaddr(&obj->base);
-- 
2.19.1

[PATCH AUTOSEL 4.19 15/73] drm/msm/dsi: configure VCO rate for 10nm PLL driver

[Sasha Levin]

From: Abhinav Kumar <abhinavk@codeaurora.org>

[ Upstream commit 8531f0587f5c9e1a74cd9543a97617349f5e0706 ]

Currenty the VCO rate in the 10nm PLL driver relies
on the parent rate which is not configured.

Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
index 4c03f0b7343e..41bec570c518 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
@@ -39,6 +39,8 @@
 #define DSI_PIXEL_PLL_CLK		1
 #define NUM_PROVIDED_CLKS		2
 
+#define VCO_REF_CLK_RATE		19200000
+
 struct dsi_pll_regs {
 	u32 pll_prop_gain_rate;
 	u32 pll_lockdet_rate;
@@ -316,7 +318,7 @@ static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
 	    parent_rate);
 
 	pll_10nm->vco_current_rate = rate;
-	pll_10nm->vco_ref_clk_rate = parent_rate;
+	pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
 
 	dsi_pll_setup_config(pll_10nm);
 
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 15/73] drm/msm/dsi: configure VCO rate for 10nm PLL driver

[Sasha Levin]

From: Abhinav Kumar <abhinavk@codeaurora.org>

[ Upstream commit 8531f0587f5c9e1a74cd9543a97617349f5e0706 ]

Currenty the VCO rate in the 10nm PLL driver relies
on the parent rate which is not configured.

Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
index 4c03f0b7343e..41bec570c518 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
@@ -39,6 +39,8 @@
 #define DSI_PIXEL_PLL_CLK		1
 #define NUM_PROVIDED_CLKS		2
 
+#define VCO_REF_CLK_RATE		19200000
+
 struct dsi_pll_regs {
 	u32 pll_prop_gain_rate;
 	u32 pll_lockdet_rate;
@@ -316,7 +318,7 @@ static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
 	    parent_rate);
 
 	pll_10nm->vco_current_rate = rate;
-	pll_10nm->vco_ref_clk_rate = parent_rate;
+	pll_10nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
 
 	dsi_pll_setup_config(pll_10nm);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 16/73] drm/msm: Grab a vblank reference when waiting for commit_done

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit 3b712e43e3876b42b38321ecf790a1f5fe59c834 ]

Similar to the atomic helpers, we should enable vblank while we're
waiting for the commit to finish. DPU needs this, MDP5 seems to work
fine without it.

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_atomic.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_atomic.c b/drivers/gpu/drm/msm/msm_atomic.c
index c1f1779c980f..2b7bb6e166d3 100644
--- a/drivers/gpu/drm/msm/msm_atomic.c
+++ b/drivers/gpu/drm/msm/msm_atomic.c
@@ -32,7 +32,12 @@ static void msm_atomic_wait_for_commit_done(struct drm_device *dev,
 		if (!new_crtc_state->active)
 			continue;
 
+		if (drm_crtc_vblank_get(crtc))
+			continue;
+
 		kms->funcs->wait_for_crtc_commit_done(kms, crtc);
+
+		drm_crtc_vblank_put(crtc);
 	}
 }
 
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 16/73] drm/msm: Grab a vblank reference when waiting for commit_done

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit 3b712e43e3876b42b38321ecf790a1f5fe59c834 ]

Similar to the atomic helpers, we should enable vblank while we're
waiting for the commit to finish. DPU needs this, MDP5 seems to work
fine without it.

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_atomic.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_atomic.c b/drivers/gpu/drm/msm/msm_atomic.c
index c1f1779c980f..2b7bb6e166d3 100644
--- a/drivers/gpu/drm/msm/msm_atomic.c
+++ b/drivers/gpu/drm/msm/msm_atomic.c
@@ -32,7 +32,12 @@ static void msm_atomic_wait_for_commit_done(struct drm_device *dev,
 		if (!new_crtc_state->active)
 			continue;
 
+		if (drm_crtc_vblank_get(crtc))
+			continue;
+
 		kms->funcs->wait_for_crtc_commit_done(kms, crtc);
+
+		drm_crtc_vblank_put(crtc);
 	}
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 17/73] drm/ttm: fix LRU handling in ttm_buffer_object_transfer

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit d6e820fcd4cf08b11d291a1dd7bbd0636914647c ]

We need to set the NO_EVICT flag on the ghost object or otherwise we are
adding it to the LRU.

When it is added to the LRU we can run into a race between destroying
and evicting it again.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_bo_util.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 046a6dda690a..40904e84f883 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -492,8 +492,10 @@ static int ttm_buffer_object_transfer(struct ttm_buffer_object *bo,
 	if (!fbo)
 		return -ENOMEM;
 
-	ttm_bo_get(bo);
 	fbo->base = *bo;
+	fbo->base.mem.placement |= TTM_PL_FLAG_NO_EVICT;
+
+	ttm_bo_get(bo);
 	fbo->bo = bo;
 
 	/**
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 17/73] drm/ttm: fix LRU handling in ttm_buffer_object_transfer

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit d6e820fcd4cf08b11d291a1dd7bbd0636914647c ]

We need to set the NO_EVICT flag on the ghost object or otherwise we are
adding it to the LRU.

When it is added to the LRU we can run into a race between destroying
and evicting it again.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_bo_util.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 046a6dda690a..40904e84f883 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -492,8 +492,10 @@ static int ttm_buffer_object_transfer(struct ttm_buffer_object *bo,
 	if (!fbo)
 		return -ENOMEM;
 
-	ttm_bo_get(bo);
 	fbo->base = *bo;
+	fbo->base.mem.placement |= TTM_PL_FLAG_NO_EVICT;
+
+	ttm_bo_get(bo);
 	fbo->bo = bo;
 
 	/**
-- 
2.19.1

[PATCH AUTOSEL 4.19 19/73] ARC: io.h: Implement reads{x}()/writes{x}()

[Sasha Levin]

From: Jose Abreu <joabreu@synopsys.com>

[ Upstream commit 10d443431dc2bb733cf7add99b453e3fb9047a2e ]

Some ARC CPU's do not support unaligned loads/stores. Currently, generic
implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC.
This can lead to misfunction of some drivers as generic functions do a
plain dereference of a pointer that can be unaligned.

Let's use {get/put}_unaligned() helpers instead of plain dereference of
pointer in order to fix. The helpers allow to get and store data from an
unaligned address whilst preserving the CPU internal alignment.
According to [1], the use of these helpers are costly in terms of
performance so we added an initial check for a buffer already aligned so
that the usage of the helpers can be avoided, when possible.

[1] Documentation/unaligned-memory-access.txt

Cc: Alexey Brodkin <abrodkin at synopsys.com>
Cc: Joao Pinto <jpinto at synopsys.com>
Cc: David Laight <David.Laight at ACULAB.COM>
Tested-by: Vitor Soares <soares at synopsys.com>
Signed-off-by: Jose Abreu <joabreu at synopsys.com>
Signed-off-by: Vineet Gupta <vgupta at synopsys.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arc/include/asm/io.h | 72 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index c22b181e8206..2f39d9b3886e 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ISA_ARCV2
 #include <asm/barrier.h>
@@ -94,6 +95,42 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
 	return w;
 }
 
+/*
+ * {read,write}s{b,w,l}() repeatedly access the same IO address in
+ * native endianness in 8-, 16-, 32-bit chunks {into,from} memory,
+ * @count times
+ */
+#define __raw_readsx(t,f) \
+static inline void __raw_reads##f(const volatile void __iomem *addr,	\
+				  void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			*buf++ = x;					\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			put_unaligned(x, buf++);			\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_readsb __raw_readsb
+__raw_readsx(8, b)
+#define __raw_readsw __raw_readsw
+__raw_readsx(16, w)
+#define __raw_readsl __raw_readsl
+__raw_readsx(32, l)
+
 #define __raw_writeb __raw_writeb
 static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
 {
@@ -126,6 +163,35 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 
 }
 
+#define __raw_writesx(t,f)						\
+static inline void __raw_writes##f(volatile void __iomem *addr, 	\
+				   const void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	const u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			__raw_write##f(*buf++, addr);			\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			__raw_write##f(get_unaligned(buf++), addr);	\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_writesb __raw_writesb
+__raw_writesx(8, b)
+#define __raw_writesw __raw_writesw
+__raw_writesx(16, w)
+#define __raw_writesl __raw_writesl
+__raw_writesx(32, l)
+
 /*
  * MMIO can also get buffered/optimized in micro-arch, so barriers needed
  * Based on ARM model for the typical use case
@@ -141,10 +207,16 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 #define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
 #define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
 #define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+#define readsb(p,d,l)		({ __raw_readsb(p,d,l); __iormb(); })
+#define readsw(p,d,l)		({ __raw_readsw(p,d,l); __iormb(); })
+#define readsl(p,d,l)		({ __raw_readsl(p,d,l); __iormb(); })
 
 #define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
 #define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
 #define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
+#define writesb(p,d,l)		({ __iowmb(); __raw_writesb(p,d,l); })
+#define writesw(p,d,l)		({ __iowmb(); __raw_writesw(p,d,l); })
+#define writesl(p,d,l)		({ __iowmb(); __raw_writesl(p,d,l); })
 
 /*
  * Relaxed API for drivers which can handle barrier ordering themselves
-- 
2.19.1

[PATCH AUTOSEL 4.19 19/73] ARC: io.h: Implement reads{x}()/writes{x}()

[Sasha Levin]

From: Jose Abreu <joabreu@synopsys.com>

[ Upstream commit 10d443431dc2bb733cf7add99b453e3fb9047a2e ]

Some ARC CPU's do not support unaligned loads/stores. Currently, generic
implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC.
This can lead to misfunction of some drivers as generic functions do a
plain dereference of a pointer that can be unaligned.

Let's use {get/put}_unaligned() helpers instead of plain dereference of
pointer in order to fix. The helpers allow to get and store data from an
unaligned address whilst preserving the CPU internal alignment.
According to [1], the use of these helpers are costly in terms of
performance so we added an initial check for a buffer already aligned so
that the usage of the helpers can be avoided, when possible.

[1] Documentation/unaligned-memory-access.txt

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Tested-by: Vitor Soares <soares@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/include/asm/io.h | 72 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index c22b181e8206..2f39d9b3886e 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ISA_ARCV2
 #include <asm/barrier.h>
@@ -94,6 +95,42 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
 	return w;
 }
 
+/*
+ * {read,write}s{b,w,l}() repeatedly access the same IO address in
+ * native endianness in 8-, 16-, 32-bit chunks {into,from} memory,
+ * @count times
+ */
+#define __raw_readsx(t,f) \
+static inline void __raw_reads##f(const volatile void __iomem *addr,	\
+				  void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			*buf++ = x;					\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			put_unaligned(x, buf++);			\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_readsb __raw_readsb
+__raw_readsx(8, b)
+#define __raw_readsw __raw_readsw
+__raw_readsx(16, w)
+#define __raw_readsl __raw_readsl
+__raw_readsx(32, l)
+
 #define __raw_writeb __raw_writeb
 static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
 {
@@ -126,6 +163,35 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 
 }
 
+#define __raw_writesx(t,f)						\
+static inline void __raw_writes##f(volatile void __iomem *addr, 	\
+				   const void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	const u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			__raw_write##f(*buf++, addr);			\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			__raw_write##f(get_unaligned(buf++), addr);	\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_writesb __raw_writesb
+__raw_writesx(8, b)
+#define __raw_writesw __raw_writesw
+__raw_writesx(16, w)
+#define __raw_writesl __raw_writesl
+__raw_writesx(32, l)
+
 /*
  * MMIO can also get buffered/optimized in micro-arch, so barriers needed
  * Based on ARM model for the typical use case
@@ -141,10 +207,16 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 #define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
 #define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
 #define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+#define readsb(p,d,l)		({ __raw_readsb(p,d,l); __iormb(); })
+#define readsw(p,d,l)		({ __raw_readsw(p,d,l); __iormb(); })
+#define readsl(p,d,l)		({ __raw_readsl(p,d,l); __iormb(); })
 
 #define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
 #define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
 #define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
+#define writesb(p,d,l)		({ __iowmb(); __raw_writesb(p,d,l); })
+#define writesw(p,d,l)		({ __iowmb(); __raw_writesw(p,d,l); })
+#define writesl(p,d,l)		({ __iowmb(); __raw_writesl(p,d,l); })
 
 /*
  * Relaxed API for drivers which can handle barrier ordering themselves
-- 
2.19.1

[PATCH AUTOSEL 4.19 20/73] net: stmmac: Move debugfs init/exit to ->probe()/->remove()

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 5f2b8b62786853341a20d4cd4948f9cbca3db002 ]

Setting up and tearing down debugfs is current unbalanced, as seen by
this error during resume from suspend:

    [  752.134067] dwc-eth-dwmac 2490000.ethernet eth0: ERROR failed to create debugfs directory
    [  752.134347] dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: failed debugFS registration

The imbalance happens because the driver creates the debugfs hierarchy
when the device is opened and tears it down when the device is closed.
There's little gain in that, and it could be argued that it is even
surprising because it's not usually done for other devices. Fix the
imbalance by moving the debugfs creation and teardown to the driver's
->probe() and ->remove() implementations instead.

Note that the ring descriptors cannot be read while the interface is
down, so make sure to return an empty file when the descriptors_status
debugfs file is read.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 23 +++++++++++--------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 75896d6ba6e2..99ea5c4ce29c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2547,12 +2547,6 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 			netdev_warn(priv->dev, "PTP init failed\n");
 	}
 
-#ifdef CONFIG_DEBUG_FS
-	ret = stmmac_init_fs(dev);
-	if (ret < 0)
-		netdev_warn(priv->dev, "%s: failed debugFS registration\n",
-			    __func__);
-#endif
 	priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
 
 	if (priv->use_riwt) {
@@ -2753,10 +2747,6 @@ static int stmmac_release(struct net_device *dev)
 
 	netif_carrier_off(dev);
 
-#ifdef CONFIG_DEBUG_FS
-	stmmac_exit_fs(dev);
-#endif
-
 	stmmac_release_ptp(priv);
 
 	return 0;
@@ -3896,6 +3886,9 @@ static int stmmac_sysfs_ring_read(struct seq_file *seq, void *v)
 	u32 tx_count = priv->plat->tx_queues_to_use;
 	u32 queue;
 
+	if ((dev->flags & IFF_UP) == 0)
+		return 0;
+
 	for (queue = 0; queue < rx_count; queue++) {
 		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
 
@@ -4394,6 +4387,13 @@ int stmmac_dvr_probe(struct device *device,
 		goto error_netdev_register;
 	}
 
+#ifdef CONFIG_DEBUG_FS
+	ret = stmmac_init_fs(ndev);
+	if (ret < 0)
+		netdev_warn(priv->dev, "%s: failed debugFS registration\n",
+			    __func__);
+#endif
+
 	return ret;
 
 error_netdev_register:
@@ -4429,6 +4429,9 @@ int stmmac_dvr_remove(struct device *dev)
 
 	netdev_info(priv->dev, "%s: removing driver", __func__);
 
+#ifdef CONFIG_DEBUG_FS
+	stmmac_exit_fs(ndev);
+#endif
 	stmmac_stop_all_dma(priv);
 
 	stmmac_mac_set(priv, priv->ioaddr, false);
-- 
2.19.1

[PATCH AUTOSEL 4.19 21/73] net: aquantia: fix rx checksum offload bits

[Sasha Levin]

From: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>

[ Upstream commit 37c4b91f955fdd5f4ad771956b97d35f1321098e ]

The last set of csum offload fixes had a leak:

Checksum enabled status bits from rx descriptor were incorrectly
interpreted. Consequently all the other valid logic worked on zero bits.
That caused rx checksum offloads never to trigger.

Tested by dumping rx descriptors and validating resulting csum_level.

Reported-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Fixes: ad703c2b9127f ("net: aquantia: invalid checksumm offload implementation")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index 88705dee5b95..56363ff5c891 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -667,7 +667,7 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
 
 		rx_stat = (0x0000003CU & rxd_wb->status) >> 2;
 
-		is_rx_check_sum_enabled = (rxd_wb->type) & (0x3U << 19);
+		is_rx_check_sum_enabled = (rxd_wb->type >> 19) & 0x3U;
 
 		pkt_type = 0xFFU & (rxd_wb->type >> 4);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 22/73] bonding: fix 802.3ad state sent to partner when unbinding slave

[Sasha Levin]

From: Toni Peltonen <peltzi@peltzi.fi>

[ Upstream commit 3b5b3a3331d141e8f2a7aaae3a94dfa1e61ecbe4 ]

Previously when unbinding a slave the 802.3ad implementation only told
partner that the port is not suitable for aggregation by setting the port
aggregation state from aggregatable to individual. This is not enough. If the
physical layer still stays up and we only unbinded this port from the bond there
is nothing in the aggregation status alone to prevent the partner from sending
traffic towards us. To ensure that the partner doesn't consider this
port at all anymore we should also disable collecting and distributing to
signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to
ensure partner exits collecting + distributing state.

I have tested this behaviour againts Arista EOS switches with mlx5 cards
(physical link stays up even when interface is down) and simulated
the same situation virtually Linux <-> Linux with two network namespaces
running two veth device pairs. In both cases setting aggregation to
individual doesn't alone prevent traffic from being to sent towards this
port given that the link stays up in partners end. Partner still keeps
it's end in collecting + distributing state and continues until timeout is
reached. In most cases this means we are losing the traffic partner sends
towards our port while we wait for timeout. This is most visible with slow
periodic time (LACP rate slow).

Other open source implementations like Open VSwitch and libreswitch, and
vendor implementations like Arista EOS, seem to disable collecting +
distributing to when doing similar port disabling/detaching/removing change.
With this patch kernel implementation would behave the same way and ensure
partner doesn't consider our actor viable anymore.

Signed-off-by: Toni Peltonen <peltzi@peltzi.fi>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_3ad.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index f43fb2f958a5..93dfcef8afc4 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2086,6 +2086,9 @@ void bond_3ad_unbind_slave(struct slave *slave)
 		   aggregator->aggregator_identifier);
 
 	/* Tell the partner that this port is not suitable for aggregation */
+	port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
+	port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
+	port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
 	port->actor_oper_port_state &= ~AD_STATE_AGGREGATION;
 	__update_lacpdu_from_port(port);
 	ad_lacpdu_send(port);
-- 
2.19.1

[PATCH AUTOSEL 4.19 23/73] bpf: Fix verifier log string check for bad alignment.

[sashal]

From: David Miller <davem at davemloft.net>

[ Upstream commit c01ac66b38660f2b507ccd0b75d28e3002d56fbb ]

The message got changed a lot time ago.

This was responsible for 36 test case failures on sparc64.

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: David S. Miller <davem at davemloft.net>
Signed-off-by: Alexei Starovoitov <ast at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/bpf/test_verifier.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 67c412d19c09..d80c36465c1c 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -12746,7 +12746,7 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 
 	reject_from_alignment = fd_prog < 0 &&
 				(test->flags & F_NEEDS_EFFICIENT_UNALIGNED_ACCESS) &&
-				strstr(bpf_vlog, "Unknown alignment.");
+				strstr(bpf_vlog, "misaligned");
 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 	if (reject_from_alignment) {
 		printf("FAIL\nFailed due to alignment despite having efficient unaligned access: '%s'!\n",
-- 
2.19.1

[PATCH AUTOSEL 4.19 23/73] bpf: Fix verifier log string check for bad alignment.

[Sasha Levin]

From: David Miller <davem@davemloft.net>

[ Upstream commit c01ac66b38660f2b507ccd0b75d28e3002d56fbb ]

The message got changed a lot time ago.

This was responsible for 36 test case failures on sparc64.

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_verifier.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 67c412d19c09..d80c36465c1c 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -12746,7 +12746,7 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 
 	reject_from_alignment = fd_prog < 0 &&
 				(test->flags & F_NEEDS_EFFICIENT_UNALIGNED_ACCESS) &&
-				strstr(bpf_vlog, "Unknown alignment.");
+				strstr(bpf_vlog, "misaligned");
 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 	if (reject_from_alignment) {
 		printf("FAIL\nFailed due to alignment despite having efficient unaligned access: '%s'!\n",
-- 
2.19.1

[PATCH AUTOSEL 4.19 23/73] bpf: Fix verifier log string check for bad alignment.

[Sasha Levin]

From: David Miller <davem@davemloft.net>

[ Upstream commit c01ac66b38660f2b507ccd0b75d28e3002d56fbb ]

The message got changed a lot time ago.

This was responsible for 36 test case failures on sparc64.

Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: David S. Miller <davem at davemloft.net>
Signed-off-by: Alexei Starovoitov <ast at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/bpf/test_verifier.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 67c412d19c09..d80c36465c1c 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -12746,7 +12746,7 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 
 	reject_from_alignment = fd_prog < 0 &&
 				(test->flags & F_NEEDS_EFFICIENT_UNALIGNED_ACCESS) &&
-				strstr(bpf_vlog, "Unknown alignment.");
+				strstr(bpf_vlog, "misaligned");
 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 	if (reject_from_alignment) {
 		printf("FAIL\nFailed due to alignment despite having efficient unaligned access: '%s'!\n",
-- 
2.19.1

[PATCH AUTOSEL 4.19 24/73] liquidio: read sc->iq_no before release sc

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit c0f53771ba45745e5870daf880127925c93f232f ]

The function lio_vf_rep_packet_sent_callback releases the occupation of
sc via octeon_free_soft_command. sc should not be used after that.
Unfortunately, sc->iq_no is read. To fix this, the patch stores sc->iq_no
into a local variable before releasing sc and then uses the local variable
instead of sc->iq_no.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c
index ddd7431579f4..c99b59fe4c8f 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c
@@ -367,13 +367,15 @@ lio_vf_rep_packet_sent_callback(struct octeon_device *oct,
 	struct octeon_soft_command *sc = (struct octeon_soft_command *)buf;
 	struct sk_buff *skb = sc->ctxptr;
 	struct net_device *ndev = skb->dev;
+	u32 iq_no;
 
 	dma_unmap_single(&oct->pci_dev->dev, sc->dmadptr,
 			 sc->datasize, DMA_TO_DEVICE);
 	dev_kfree_skb_any(skb);
+	iq_no = sc->iq_no;
 	octeon_free_soft_command(oct, sc);
 
-	if (octnet_iq_is_full(oct, sc->iq_no))
+	if (octnet_iq_is_full(oct, iq_no))
 		return;
 
 	if (netif_queue_stopped(ndev))
-- 
2.19.1

[PATCH AUTOSEL 4.19 25/73] nfs: don't dirty kernel pages read by direct-io

[Sasha Levin]

From: Dave Kleikamp <dave.kleikamp@oracle.com>

[ Upstream commit ad3cba223ac02dc769c3bbe88efe277bbb457566 ]

When we use direct_IO with an NFS backing store, we can trigger a
WARNING in __set_page_dirty(), as below, since we're dirtying the page
unnecessarily in nfs_direct_read_completion().

To fix, replicate the logic in commit 53cbf3b157a0 ("fs: direct-io:
don't dirtying pages for ITER_BVEC/ITER_KVEC direct read").

Other filesystems that implement direct_IO handle this; most use
blockdev_direct_IO(). ceph and cifs have similar logic.

mount 127.0.0.1:/export /nfs
dd if=/dev/zero of=/nfs/image bs=1M count=200
losetup --direct-io=on -f /nfs/image
mkfs.btrfs /dev/loop0
mount -t btrfs /dev/loop0 /mnt/

kernel: WARNING: CPU: 0 PID: 8067 at fs/buffer.c:580 __set_page_dirty+0xaf/0xd0
kernel: Modules linked in: loop(E) nfsv3(E) rpcsec_gss_krb5(E) nfsv4(E) dns_resolver(E) nfs(E) fscache(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) fuse(E) tun(E) ip6t_rpfilter(E) ipt_REJECT(E) nf_
kernel:  snd_seq(E) snd_seq_device(E) snd_pcm(E) video(E) snd_timer(E) snd(E) soundcore(E) ip_tables(E) xfs(E) libcrc32c(E) sd_mod(E) sr_mod(E) cdrom(E) ata_generic(E) pata_acpi(E) crc32c_intel(E) ahci(E) li
kernel: CPU: 0 PID: 8067 Comm: kworker/0:2 Tainted: G            E     4.20.0-rc1.master.20181111.ol7.x86_64 #1
kernel: Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
kernel: Workqueue: nfsiod rpc_async_release [sunrpc]
kernel: RIP: 0010:__set_page_dirty+0xaf/0xd0
kernel: Code: c3 48 8b 02 f6 c4 04 74 d4 48 89 df e8 ba 05 f7 ff 48 89 c6 eb cb 48 8b 43 08 a8 01 75 1f 48 89 d8 48 8b 00 a8 04 74 02 eb 87 <0f> 0b eb 83 48 83 e8 01 eb 9f 48 83 ea 01 0f 1f 00 eb 8b 48 83 e8
kernel: RSP: 0000:ffffc1c8825b7d78 EFLAGS: 00013046
kernel: RAX: 000fffffc0020089 RBX: fffff2b603308b80 RCX: 0000000000000001
kernel: RDX: 0000000000000001 RSI: ffff9d11478115c8 RDI: ffff9d11478115d0
kernel: RBP: ffffc1c8825b7da0 R08: 0000646f6973666e R09: 8080808080808080
kernel: R10: 0000000000000001 R11: 0000000000000000 R12: ffff9d11478115d0
kernel: R13: ffff9d11478115c8 R14: 0000000000003246 R15: 0000000000000001
kernel: FS:  0000000000000000(0000) GS:ffff9d115ba00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007f408686f640 CR3: 0000000104d8e004 CR4: 00000000000606f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: Call Trace:
kernel:  __set_page_dirty_buffers+0xb6/0x110
kernel:  set_page_dirty+0x52/0xb0
kernel:  nfs_direct_read_completion+0xc4/0x120 [nfs]
kernel:  nfs_pgio_release+0x10/0x20 [nfs]
kernel:  rpc_free_task+0x30/0x70 [sunrpc]
kernel:  rpc_async_release+0x12/0x20 [sunrpc]
kernel:  process_one_work+0x174/0x390
kernel:  worker_thread+0x4f/0x3e0
kernel:  kthread+0x102/0x140
kernel:  ? drain_workqueue+0x130/0x130
kernel:  ? kthread_stop+0x110/0x110
kernel:  ret_from_fork+0x35/0x40
kernel: ---[ end trace 01341980905412c9 ]---

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

[forward-ported to v4.20]
Signed-off-by: Calum Mackay <calum.mackay@oracle.com>
Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/direct.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index aa12c3063bae..33824a0a57bf 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -98,8 +98,11 @@ struct nfs_direct_req {
 	struct pnfs_ds_commit_info ds_cinfo;	/* Storage for cinfo */
 	struct work_struct	work;
 	int			flags;
+	/* for write */
 #define NFS_ODIRECT_DO_COMMIT		(1)	/* an unstable reply was received */
 #define NFS_ODIRECT_RESCHED_WRITES	(2)	/* write verification failed */
+	/* for read */
+#define NFS_ODIRECT_SHOULD_DIRTY	(3)	/* dirty user-space page after read */
 	struct nfs_writeverf	verf;		/* unstable write verifier */
 };
 
@@ -412,7 +415,8 @@ static void nfs_direct_read_completion(struct nfs_pgio_header *hdr)
 		struct nfs_page *req = nfs_list_entry(hdr->pages.next);
 		struct page *page = req->wb_page;
 
-		if (!PageCompound(page) && bytes < hdr->good_bytes)
+		if (!PageCompound(page) && bytes < hdr->good_bytes &&
+		    (dreq->flags == NFS_ODIRECT_SHOULD_DIRTY))
 			set_page_dirty(page);
 		bytes += req->wb_bytes;
 		nfs_list_remove_request(req);
@@ -587,6 +591,9 @@ ssize_t nfs_file_direct_read(struct kiocb *iocb, struct iov_iter *iter)
 	if (!is_sync_kiocb(iocb))
 		dreq->iocb = iocb;
 
+	if (iter_is_iovec(iter))
+		dreq->flags = NFS_ODIRECT_SHOULD_DIRTY;
+
 	nfs_start_io_direct(inode);
 
 	NFS_I(inode)->read_io += count;
-- 
2.19.1

[PATCH AUTOSEL 4.19 26/73] SUNRPC: Fix leak of krb5p encode pages

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 8dae5398ab1ac107b1517e8195ed043d5f422bd0 ]

call_encode can be invoked more than once per RPC call. Ensure that
each call to gss_wrap_req_priv does not overwrite pointers to
previously allocated memory.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/auth_gss.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 21c0aa0a0d1d..8cb7d812ccb8 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -1768,6 +1768,7 @@ priv_release_snd_buf(struct rpc_rqst *rqstp)
 	for (i=0; i < rqstp->rq_enc_pages_num; i++)
 		__free_page(rqstp->rq_enc_pages[i]);
 	kfree(rqstp->rq_enc_pages);
+	rqstp->rq_release_snd_buf = NULL;
 }
 
 static int
@@ -1776,6 +1777,9 @@ alloc_enc_pages(struct rpc_rqst *rqstp)
 	struct xdr_buf *snd_buf = &rqstp->rq_snd_buf;
 	int first, last, i;
 
+	if (rqstp->rq_release_snd_buf)
+		rqstp->rq_release_snd_buf(rqstp);
+
 	if (snd_buf->page_len == 0) {
 		rqstp->rq_enc_pages_num = 0;
 		return 0;
-- 
2.19.1

[PATCH AUTOSEL 4.19 27/73] SUNRPC: Fix a potential race in xprt_connect()

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 0a9a4304f3614e25d9de9b63502ca633c01c0d70 ]

If an asynchronous connection attempt completes while another task is
in xprt_connect(), then the call to rpc_sleep_on() could end up
racing with the call to xprt_wake_pending_tasks().
So add a second test of the connection state after we've put the
task to sleep and set the XPRT_CONNECTING flag, when we know that there
can be no asynchronous connection attempts still in progress.

Fixes: 0b9e79431377d ("SUNRPC: Move the test for XPRT_CONNECTING into...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprt.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index a8db2e3f8904..d066aae3cb6d 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -781,8 +781,15 @@ void xprt_connect(struct rpc_task *task)
 			return;
 		if (xprt_test_and_set_connecting(xprt))
 			return;
-		xprt->stat.connect_start = jiffies;
-		xprt->ops->connect(xprt, task);
+		/* Race breaker */
+		if (!xprt_connected(xprt)) {
+			xprt->stat.connect_start = jiffies;
+			xprt->ops->connect(xprt, task);
+		} else {
+			xprt_clear_connecting(xprt);
+			task->tk_status = 0;
+			rpc_wake_up_queued_task(&xprt->pending, task);
+		}
 	}
 	xprt_release_write(xprt, task);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 28/73] sbus: char: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 87d81a23e24f24ebe014891e8bdf3ff8785031e8 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/sbus/char/display7seg.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index 5c8ed7350a04..a36e4cf1841d 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -220,6 +220,7 @@ static int d7s_probe(struct platform_device *op)
 	dev_set_drvdata(&op->dev, p);
 	d7s_device = p;
 	err = 0;
+	of_node_put(opts);
 
 out:
 	return err;
-- 
2.19.1

[PATCH AUTOSEL 4.19 28/73] sbus: char: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 87d81a23e24f24ebe014891e8bdf3ff8785031e8 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/sbus/char/display7seg.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index 5c8ed7350a04..a36e4cf1841d 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -220,6 +220,7 @@ static int d7s_probe(struct platform_device *op)
 	dev_set_drvdata(&op->dev, p);
 	d7s_device = p;
 	err = 0;
+	of_node_put(opts);
 
 out:
 	return err;
-- 
2.19.1

[PATCH AUTOSEL 4.19 29/73] drivers/sbus/char: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 6bd520ab7cf69486ea81fd3cdfd2d5a390ad1100 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/sbus/char/envctrl.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index 56e962a01493..b8481927bfe4 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -910,8 +910,10 @@ static void envctrl_init_i2c_child(struct device_node *dp,
 			for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) {
 				pchild->mon_type[len] = ENVCTRL_NOMON;
 			}
+			of_node_put(root_node);
 			return;
 		}
+		of_node_put(root_node);
 	}
 
 	/* Get the monitor channels. */
-- 
2.19.1

[PATCH AUTOSEL 4.19 29/73] drivers/sbus/char: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 6bd520ab7cf69486ea81fd3cdfd2d5a390ad1100 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/sbus/char/envctrl.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index 56e962a01493..b8481927bfe4 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -910,8 +910,10 @@ static void envctrl_init_i2c_child(struct device_node *dp,
 			for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) {
 				pchild->mon_type[len] = ENVCTRL_NOMON;
 			}
+			of_node_put(root_node);
 			return;
 		}
+		of_node_put(root_node);
 	}
 
 	/* Get the monitor channels. */
-- 
2.19.1

[PATCH AUTOSEL 4.19 30/73] drivers/tty: add missing of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit dac097c4546e4c5b16dd303a1e97c1d319c8ab3e ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place is not doing this, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/suncore.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c
index 70a4ea4eaa6e..990376576970 100644
--- a/drivers/tty/serial/suncore.c
+++ b/drivers/tty/serial/suncore.c
@@ -112,6 +112,7 @@ void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
 		mode = of_get_property(dp, mode_prop, NULL);
 		if (!mode)
 			mode = "9600,8,n,1,-";
+		of_node_put(dp);
 	}
 
 	cflag = CREAD | HUPCL | CLOCAL;
-- 
2.19.1

[PATCH AUTOSEL 4.19 30/73] drivers/tty: add missing of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit dac097c4546e4c5b16dd303a1e97c1d319c8ab3e ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place is not doing this, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/suncore.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c
index 70a4ea4eaa6e..990376576970 100644
--- a/drivers/tty/serial/suncore.c
+++ b/drivers/tty/serial/suncore.c
@@ -112,6 +112,7 @@ void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
 		mode = of_get_property(dp, mode_prop, NULL);
 		if (!mode)
 			mode = "9600,8,n,1,-";
+		of_node_put(dp);
 	}
 
 	cflag = CREAD | HUPCL | CLOCAL;
-- 
2.19.1

[PATCH AUTOSEL 4.19 31/73] ide: pmac: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit a51921c0db3fd26c4ed83dc0ec5d32988fa02aa5 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ide/pmac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index c5b902b86b44..203ed4adc04a 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -920,6 +920,7 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
 	struct device_node *root = of_find_node_by_path("/");
 	const char *model = of_get_property(root, "model", NULL);
 
+	of_node_put(root);
 	/* Get cable type from device-tree. */
 	if (cable && !strncmp(cable, "80-", 3)) {
 		/* Some drives fail to detect 80c cable in PowerBook */
-- 
2.19.1

[PATCH AUTOSEL 4.19 31/73] ide: pmac: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit a51921c0db3fd26c4ed83dc0ec5d32988fa02aa5 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ide/pmac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index c5b902b86b44..203ed4adc04a 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -920,6 +920,7 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
 	struct device_node *root = of_find_node_by_path("/");
 	const char *model = of_get_property(root, "model", NULL);
 
+	of_node_put(root);
 	/* Get cable type from device-tree. */
 	if (cable && !strncmp(cable, "80-", 3)) {
 		/* Some drives fail to detect 80c cable in PowerBook */
-- 
2.19.1

[PATCH AUTOSEL 4.19 32/73] drm/msm/hdmi: Enable HPD after HDMI IRQ is set up

[Sasha Levin]

From: Todor Tomov <todor.tomov@linaro.org>

[ Upstream commit ee4456359640defe3f51cc6b728bfce4bc444c9e ]

SoCs that contain MDP5 have a top level wrapper called MDSS that
manages locks, power and irq for the sub-blocks within it.

Irq for HDMI is also routed through the MDSS.

Shortly after the Hot Plug Detection (HPD) is enabled in HDMI,
HDMI interrupts are recieved by the MDSS interrupt handler.
However at this moment the HDMI irq is still not mapped to
the MDSS irq domain so the HDMI irq handler cannot be called
to process the interrupts.

This leads to a flood of HDMI interrupts on CPU 0.

If we are lucky to have the HDMI initialization running on a
different CPU, it will eventually map the HDMI irq to MDSS irq
domain, the next HDMI interrupt will be handled by the HDMI irq
handler, the interrupt flood will stop and we will recover.

If the HDMI initialization is running on CPU 0, then it cannot
complete and there is nothing to stop the interrupt flood on
CPU 0. The system is stuck.

Fix this by moving the HPD enablement after the HDMI irq is
mapped to the MDSS irq domain.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c           |  6 ++++++
 drivers/gpu/drm/msm/hdmi/hdmi.h           |  1 +
 drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 10 ++--------
 3 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index c79659ca5706..33e083f71a17 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -332,6 +332,12 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
 		goto fail;
 	}
 
+	ret = msm_hdmi_hpd_enable(hdmi->connector);
+	if (ret < 0) {
+		DRM_DEV_ERROR(&hdmi->pdev->dev, "failed to enable HPD: %d\n", ret);
+		goto fail;
+	}
+
 	encoder->bridge = hdmi->bridge;
 
 	priv->bridges[priv->num_bridges++]       = hdmi->bridge;
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index accc9a61611d..5c5df6ab2a57 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -245,6 +245,7 @@ void msm_hdmi_bridge_destroy(struct drm_bridge *bridge);
 
 void msm_hdmi_connector_irq(struct drm_connector *connector);
 struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi);
+int msm_hdmi_hpd_enable(struct drm_connector *connector);
 
 /*
  * i2c adapter for ddc:
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index e9c9a0af508e..30e908dfded7 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -167,8 +167,9 @@ static void enable_hpd_clocks(struct hdmi *hdmi, bool enable)
 	}
 }
 
-static int hpd_enable(struct hdmi_connector *hdmi_connector)
+int msm_hdmi_hpd_enable(struct drm_connector *connector)
 {
+	struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
 	struct hdmi *hdmi = hdmi_connector->hdmi;
 	const struct hdmi_platform_config *config = hdmi->config;
 	struct device *dev = &hdmi->pdev->dev;
@@ -450,7 +451,6 @@ struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi)
 {
 	struct drm_connector *connector = NULL;
 	struct hdmi_connector *hdmi_connector;
-	int ret;
 
 	hdmi_connector = kzalloc(sizeof(*hdmi_connector), GFP_KERNEL);
 	if (!hdmi_connector)
@@ -471,12 +471,6 @@ struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi)
 	connector->interlace_allowed = 0;
 	connector->doublescan_allowed = 0;
 
-	ret = hpd_enable(hdmi_connector);
-	if (ret) {
-		dev_err(&hdmi->pdev->dev, "failed to enable HPD: %d\n", ret);
-		return ERR_PTR(ret);
-	}
-
 	drm_connector_attach_encoder(connector, hdmi->encoder);
 
 	return connector;
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 32/73] drm/msm/hdmi: Enable HPD after HDMI IRQ is set up

[Sasha Levin]

From: Todor Tomov <todor.tomov@linaro.org>

[ Upstream commit ee4456359640defe3f51cc6b728bfce4bc444c9e ]

SoCs that contain MDP5 have a top level wrapper called MDSS that
manages locks, power and irq for the sub-blocks within it.

Irq for HDMI is also routed through the MDSS.

Shortly after the Hot Plug Detection (HPD) is enabled in HDMI,
HDMI interrupts are recieved by the MDSS interrupt handler.
However at this moment the HDMI irq is still not mapped to
the MDSS irq domain so the HDMI irq handler cannot be called
to process the interrupts.

This leads to a flood of HDMI interrupts on CPU 0.

If we are lucky to have the HDMI initialization running on a
different CPU, it will eventually map the HDMI irq to MDSS irq
domain, the next HDMI interrupt will be handled by the HDMI irq
handler, the interrupt flood will stop and we will recover.

If the HDMI initialization is running on CPU 0, then it cannot
complete and there is nothing to stop the interrupt flood on
CPU 0. The system is stuck.

Fix this by moving the HPD enablement after the HDMI irq is
mapped to the MDSS irq domain.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c           |  6 ++++++
 drivers/gpu/drm/msm/hdmi/hdmi.h           |  1 +
 drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 10 ++--------
 3 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index c79659ca5706..33e083f71a17 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -332,6 +332,12 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
 		goto fail;
 	}
 
+	ret = msm_hdmi_hpd_enable(hdmi->connector);
+	if (ret < 0) {
+		DRM_DEV_ERROR(&hdmi->pdev->dev, "failed to enable HPD: %d\n", ret);
+		goto fail;
+	}
+
 	encoder->bridge = hdmi->bridge;
 
 	priv->bridges[priv->num_bridges++]       = hdmi->bridge;
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index accc9a61611d..5c5df6ab2a57 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -245,6 +245,7 @@ void msm_hdmi_bridge_destroy(struct drm_bridge *bridge);
 
 void msm_hdmi_connector_irq(struct drm_connector *connector);
 struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi);
+int msm_hdmi_hpd_enable(struct drm_connector *connector);
 
 /*
  * i2c adapter for ddc:
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index e9c9a0af508e..30e908dfded7 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -167,8 +167,9 @@ static void enable_hpd_clocks(struct hdmi *hdmi, bool enable)
 	}
 }
 
-static int hpd_enable(struct hdmi_connector *hdmi_connector)
+int msm_hdmi_hpd_enable(struct drm_connector *connector)
 {
+	struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
 	struct hdmi *hdmi = hdmi_connector->hdmi;
 	const struct hdmi_platform_config *config = hdmi->config;
 	struct device *dev = &hdmi->pdev->dev;
@@ -450,7 +451,6 @@ struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi)
 {
 	struct drm_connector *connector = NULL;
 	struct hdmi_connector *hdmi_connector;
-	int ret;
 
 	hdmi_connector = kzalloc(sizeof(*hdmi_connector), GFP_KERNEL);
 	if (!hdmi_connector)
@@ -471,12 +471,6 @@ struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi)
 	connector->interlace_allowed = 0;
 	connector->doublescan_allowed = 0;
 
-	ret = hpd_enable(hdmi_connector);
-	if (ret) {
-		dev_err(&hdmi->pdev->dev, "failed to enable HPD: %d\n", ret);
-		return ERR_PTR(ret);
-	}
-
 	drm_connector_attach_encoder(connector, hdmi->encoder);
 
 	return connector;
-- 
2.19.1

[PATCH AUTOSEL 4.19 33/73] drm/msm: dpu: Don't set legacy plane->crtc pointer

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit 081679c51ef2fd7b23cf9ddb7d775b17f75de18c ]

It causes a WARN in drm_atomic_get_plane_state(), and is not used by
atomic (or dpu).

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index cd02eae884cc..4752f08f0884 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -2122,7 +2122,6 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane)
 				NULL);
 
 	drm_crtc_helper_add(crtc, &dpu_crtc_helper_funcs);
-	plane->crtc = crtc;
 
 	/* save user friendly CRTC name for later */
 	snprintf(dpu_crtc->name, DPU_CRTC_NAME_SIZE, "crtc%u", crtc->base.id);
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 33/73] drm/msm: dpu: Don't set legacy plane->crtc pointer

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit 081679c51ef2fd7b23cf9ddb7d775b17f75de18c ]

It causes a WARN in drm_atomic_get_plane_state(), and is not used by
atomic (or dpu).

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index cd02eae884cc..4752f08f0884 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -2122,7 +2122,6 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane)
 				NULL);
 
 	drm_crtc_helper_add(crtc, &dpu_crtc_helper_funcs);
-	plane->crtc = crtc;
 
 	/* save user friendly CRTC name for later */
 	snprintf(dpu_crtc->name, DPU_CRTC_NAME_SIZE, "crtc%u", crtc->base.id);
-- 
2.19.1

[PATCH AUTOSEL 4.19 34/73] drm/msm: dpu: Fix "WARNING: invalid free of devm_ allocated data"

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit ce25aa3ee6939d83979cccf7adc5737cba9a0cb7 ]

'dpu_enc' is a member of 'drm_enc'
And 'drm_enc' got allocated with devm_kzalloc in dpu_encoder_init.

This gives this error message:
./drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:459:1-6:
 WARNING: invalid free of devm_ allocated data

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 1b4de3486ef9..ec3fd67378c1 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -503,8 +503,6 @@ static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
 
 	drm_encoder_cleanup(drm_enc);
 	mutex_destroy(&dpu_enc->enc_lock);
-
-	kfree(dpu_enc);
 }
 
 void dpu_encoder_helper_split_config(
-- 
2.19.1

[PATCH AUTOSEL 4.19 35/73] drm/msm: Fix error return checking

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 098336deb946f37a70afc0979af388b615c378bf ]

The error checks on ret for a negative error return always fails because
the return value of iommu_map_sg() is unsigned and can never be negative.

Detected with Coccinelle:
drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression
compared with zero: ret < 0

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Rob Clark <robdclark@gmail.com>
CC: David Airlie <airlied@linux.ie>
CC: Julia Lawall <julia.lawall@lip6.fr>
CC: linux-arm-msm@vger.kernel.org
CC: dri-devel@lists.freedesktop.org
CC: freedreno@lists.freedesktop.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c
index b23d33622f37..2a90aa4caec0 100644
--- a/drivers/gpu/drm/msm/msm_iommu.c
+++ b/drivers/gpu/drm/msm/msm_iommu.c
@@ -66,7 +66,7 @@ static int msm_iommu_map(struct msm_mmu *mmu, uint64_t iova,
 //	pm_runtime_get_sync(mmu->dev);
 	ret = iommu_map_sg(iommu->domain, iova, sgt->sgl, sgt->nents, prot);
 //	pm_runtime_put_sync(mmu->dev);
-	WARN_ON(ret < 0);
+	WARN_ON(!ret);
 
 	return (ret == len) ? 0 : -EINVAL;
 }
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 35/73] drm/msm: Fix error return checking

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 098336deb946f37a70afc0979af388b615c378bf ]

The error checks on ret for a negative error return always fails because
the return value of iommu_map_sg() is unsigned and can never be negative.

Detected with Coccinelle:
drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression
compared with zero: ret < 0

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Rob Clark <robdclark@gmail.com>
CC: David Airlie <airlied@linux.ie>
CC: Julia Lawall <julia.lawall@lip6.fr>
CC: linux-arm-msm@vger.kernel.org
CC: dri-devel@lists.freedesktop.org
CC: freedreno@lists.freedesktop.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c
index b23d33622f37..2a90aa4caec0 100644
--- a/drivers/gpu/drm/msm/msm_iommu.c
+++ b/drivers/gpu/drm/msm/msm_iommu.c
@@ -66,7 +66,7 @@ static int msm_iommu_map(struct msm_mmu *mmu, uint64_t iova,
 //	pm_runtime_get_sync(mmu->dev);
 	ret = iommu_map_sg(iommu->domain, iova, sgt->sgl, sgt->nents, prot);
 //	pm_runtime_put_sync(mmu->dev);
-	WARN_ON(ret < 0);
+	WARN_ON(!ret);
 
 	return (ret == len) ? 0 : -EINVAL;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 37/73] clk: mvebu: Off by one bugs in cp110_of_clk_get()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d9f5b7f5dd0fa74a89de5a7ac1e26366f211ccee ]

These > comparisons should be >= to prevent reading beyond the end of
of the clk_data->hws[] buffer.

The clk_data->hws[] array is allocated in cp110_syscon_common_probe()
when we do:
	cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) +
				      sizeof(struct clk_hw *) * CP110_CLK_NUM,
				      GFP_KERNEL);
As you can see, it has CP110_CLK_NUM elements which is equivalent to
CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS.

Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mvebu/cp110-system-controller.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mvebu/cp110-system-controller.c b/drivers/clk/mvebu/cp110-system-controller.c
index 75bf7b8f282f..0153c76d4a20 100644
--- a/drivers/clk/mvebu/cp110-system-controller.c
+++ b/drivers/clk/mvebu/cp110-system-controller.c
@@ -202,11 +202,11 @@ static struct clk_hw *cp110_of_clk_get(struct of_phandle_args *clkspec,
 	unsigned int idx = clkspec->args[1];
 
 	if (type == CP110_CLK_TYPE_CORE) {
-		if (idx > CP110_MAX_CORE_CLOCKS)
+		if (idx >= CP110_MAX_CORE_CLOCKS)
 			return ERR_PTR(-EINVAL);
 		return clk_data->hws[idx];
 	} else if (type == CP110_CLK_TYPE_GATABLE) {
-		if (idx > CP110_MAX_GATABLE_CLOCKS)
+		if (idx >= CP110_MAX_GATABLE_CLOCKS)
 			return ERR_PTR(-EINVAL);
 		return clk_data->hws[CP110_MAX_CORE_CLOCKS + idx];
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.19 38/73] clk: mmp: Off by one in mmp_clk_add()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 2e85c57493e391b93445c1e0d530b36b95becc64 ]

The > comparison should be >= or we write one element beyond the end of
the unit->clk_table[] array.

(The unit->clk_table[] array is allocated in the mmp_clk_init() function
and it has unit->nr_clks elements).

Fixes: 4661fda10f8b ("clk: mmp: add basic support functions for DT support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mmp/clk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/mmp/clk.c b/drivers/clk/mmp/clk.c
index ad8d483a35cd..ca7d37e2c7be 100644
--- a/drivers/clk/mmp/clk.c
+++ b/drivers/clk/mmp/clk.c
@@ -183,7 +183,7 @@ void mmp_clk_add(struct mmp_clk_unit *unit, unsigned int id,
 		pr_err("CLK %d has invalid pointer %p\n", id, clk);
 		return;
 	}
-	if (id > unit->nr_clks) {
+	if (id >= unit->nr_clks) {
 		pr_err("CLK %d is invalid\n", id);
 		return;
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.19 39/73] Input: synaptics - enable SMBus for HP 15-ay000

[Sasha Levin]

From: Teika Kazura <teika@gmx.com>

[ Upstream commit 5a6dab15f7a79817cab4af612ddd99eda793fce6 ]

SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000
series,

This device has been reported in these messages in the "linux-input"
mailing list:
* https://marc.info/?l=linux-input&m=152016683003369&w=2
* https://www.spinics.net/lists/linux-input/msg52525.html

Reported-by: Nitesh Debnath <niteshkd1999@gmail.com>
Reported-by: Teika Kazura <teika@gmx.com>
Signed-off-by: Teika Kazura <teika@gmx.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/synaptics.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index c42813d50591..2bd5bb11c8ba 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -178,6 +178,7 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN0096", /* X280 */
 	"LEN0097", /* X280 -> ALPS trackpoint */
 	"LEN200f", /* T450s */
+	"SYN3221", /* HP 15-ay000 */
 	NULL
 };
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 40/73] Input: omap-keypad - fix keyboard debounce configuration

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 6c3516fed7b61a3527459ccfa67fab130d910610 ]

I noticed that the Android v3.0.8 kernel on droid4 is using different
keypad values from the mainline kernel and does not have issues with
keys occasionally being stuck until pressed again. Turns out there was
an earlier patch posted to fix this as "Input: omap-keypad: errata i689:
Correct debounce time", but it was never reposted to fix use macros
for timing calculations.

This updated version is using macros, and also fixes the use of the
input clock rate to use 32768KiHz instead of 32000KiHz. And we want to
use the known good Android kernel values of 3 and 6 instead of 2 and 6
in the earlier patch.

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/omap4-keypad.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 46406345742b..a7dc286f406c 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -60,8 +60,18 @@
 
 /* OMAP4 values */
 #define OMAP4_VAL_IRQDISABLE		0x0
-#define OMAP4_VAL_DEBOUNCINGTIME	0x7
-#define OMAP4_VAL_PVT			0x7
+
+/*
+ * Errata i689: If a key is released for a time shorter than debounce time,
+ * the keyboard will idle and never detect the key release. The workaround
+ * is to use at least a 12ms debounce time. See omap5432 TRM chapter
+ * "26.4.6.2 Keyboard Controller Timer" for more information.
+ */
+#define OMAP4_KEYPAD_PTV_DIV_128        0x6
+#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv)     \
+	((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1)
+#define OMAP4_VAL_DEBOUNCINGTIME_16MS					\
+	OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128)
 
 enum {
 	KBD_REVISION_OMAP4 = 0,
@@ -181,9 +191,9 @@ static int omap4_keypad_open(struct input_dev *input)
 
 	kbd_writel(keypad_data, OMAP4_KBD_CTRL,
 			OMAP4_DEF_CTRL_NOSOFTMODE |
-			(OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT));
+			(OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT));
 	kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
-			OMAP4_VAL_DEBOUNCINGTIME);
+			OMAP4_VAL_DEBOUNCINGTIME_16MS);
 	/* clear pending interrupts */
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
 			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
-- 
2.19.1

[PATCH AUTOSEL 4.19 41/73] libata: whitelist all SAMSUNG MZ7KM* solid-state disks

[Sasha Levin]

From: Juha-Matti Tilli <juha-matti.tilli@iki.fi>

[ Upstream commit fd6f32f78645db32b6b95a42e45da2ddd6de0e67 ]

These devices support read zero after trim (RZAT), as they advertise to
the OS. However, the OS doesn't believe the SSDs unless they are
explicitly whitelisted.

Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a7f5202a4815..b8c3f9e6af89 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4602,6 +4602,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "SSD*INTEL*",			NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung*SSD*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "SAMSUNG*SSD*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "SAMSUNG*MZ7KM*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "ST[1248][0248]0[FH]*",	NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 
 	/*
-- 
2.19.1

[PATCH AUTOSEL 4.19 42/73] net: phy: don't allow __set_phy_supported to add unsupported modes

[Sasha Levin]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit d2a36971ef595069b7a600d1144c2e0881a930a1 ]

Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.

The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.

Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 733e35b7c4bb..20d1be2b070b 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1738,20 +1738,17 @@ EXPORT_SYMBOL(genphy_loopback);
 
 static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
 {
-	phydev->supported &= ~(PHY_1000BT_FEATURES | PHY_100BT_FEATURES |
-			       PHY_10BT_FEATURES);
-
 	switch (max_speed) {
-	default:
-		return -ENOTSUPP;
-	case SPEED_1000:
-		phydev->supported |= PHY_1000BT_FEATURES;
+	case SPEED_10:
+		phydev->supported &= ~PHY_100BT_FEATURES;
 		/* fall through */
 	case SPEED_100:
-		phydev->supported |= PHY_100BT_FEATURES;
-		/* fall through */
-	case SPEED_10:
-		phydev->supported |= PHY_10BT_FEATURES;
+		phydev->supported &= ~PHY_1000BT_FEATURES;
+		break;
+	case SPEED_1000:
+		break;
+	default:
+		return -ENOTSUPP;
 	}
 
 	return 0;
-- 
2.19.1

[PATCH AUTOSEL 4.19 43/73] net: 8139cp: fix a BUG triggered by changing mtu with network traffic

[Sasha Levin]

From: Su Yanjun <suyj.fnst@cn.fujitsu.com>

[ Upstream commit a5d4a89245ead1f37ed135213653c5beebea4237 ]

When changing mtu many times with traffic, a bug is triggered:

[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26!
[ 1035.684042] invalid opcode: 0000 [#1] SMP
[ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec
tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp
fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun
bridge stp llc ebtable_filter ebtables ip6table_filter devlink
ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul
parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm
aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper
ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs
libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic
[ 1035.684102]  pata_acpi virtio_console qxl drm_kms_helper syscopyarea
sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul
crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too
virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror
dm_region_hash dm_log dm_mod [last unloaded: 8139cp]
[ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded
Tainted: G           OE  ------------ T 3.10.0-957.el7.x86_64 #1
[ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti:
ffff8f5a2e32c000
[ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>]  [<ffffffffba3a40d0>]
dql_completed+0x180/0x190
[ 1035.684162] RSP: 0000:ffff8f5a75483e50  EFLAGS: 00010093
[ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX:
0000000000000000
[ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI:
ffff8f599fea3ec0
[ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09:
0000000000000000
[ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12:
ffff8f599fea3e00
[ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15:
0000000000000184
[ 1035.684162] FS:  00007fa8434de740(0000) GS:ffff8f5a75480000(0000)
knlGS:0000000000000000
[ 1035.684162] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4:
00000000001406e0
[ 1035.684162] Call Trace:
[ 1035.684162]  <IRQ>
[ 1035.684162]  [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp]
[ 1035.684162]  [<ffffffffba14a294>]
__handle_irq_event_percpu+0x44/0x1c0
[ 1035.684162]  [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80
[ 1035.684162]  [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60
[ 1035.684162]  [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110
[ 1035.684162]  [<ffffffffba02e554>] handle_irq+0xe4/0x1a0
[ 1035.684162]  [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0
[ 1035.684162]  [<ffffffffba76b362>] common_interrupt+0x162/0x162
[ 1035.684162]  <EOI>
[ 1035.684162]  [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70
[ 1035.684162]  [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120
[ 1035.684162]  [<ffffffffba1b64fb>] unlock_page+0x2b/0x30
[ 1035.684162]  [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0
[ 1035.684162]  [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10
[ 1035.684162]  [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0
[ 1035.684162]  [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500
[ 1035.684162]  [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150
[ 1035.684162]  [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0
[ 1035.684162]  [<ffffffffba76b788>] async_page_fault+0x28/0x30
[ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f
9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe
ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48
[ 1035.684162] RIP  [<ffffffffba3a40d0>] dql_completed+0x180/0x190
[ 1035.684162]  RSP <ffff8f5a75483e50>

It's not the same as in 7fe0ee09 patch described.
As 8139cp uses shared irq mode, other device irq will trigger
cp_interrupt to execute.

cp_change_mtu
 -> cp_close
 -> cp_open

In cp_close routine  just before free_irq(), some interrupt may occur.
In my environment, cp_interrupt exectutes and IntrStatus is 0x4,
exactly TxOk. That will cause cp_tx to wake device queue.

As device queue is started, cp_start_xmit and cp_open will run at same
time which will cause kernel BUG.

For example:
[#] for tx descriptor

At start:

[#][#][#]
num_queued=3

After cp_init_hw->cp_start_hw->netdev_reset_queue:

[#][#][#]
num_queued=0

When 8139cp starts to work then cp_tx will check
num_queued mismatchs the complete_bytes.

The patch will check IntrMask before check IntrStatus in cp_interrupt.
When 8139cp interrupt is disabled, just return.

Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/8139cp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 81045dfa1cd8..44f6e4873aad 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -571,6 +571,7 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 	struct cp_private *cp;
 	int handled = 0;
 	u16 status;
+	u16 mask;
 
 	if (unlikely(dev == NULL))
 		return IRQ_NONE;
@@ -578,6 +579,10 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 
 	spin_lock(&cp->lock);
 
+	mask = cpr16(IntrMask);
+	if (!mask)
+		goto out_unlock;
+
 	status = cpr16(IntrStatus);
 	if (!status || (status == 0xFFFF))
 		goto out_unlock;
-- 
2.19.1

[PATCH AUTOSEL 4.19 44/73] net: phy: Fix not to call phy_resume() if PHY is not attached

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ]

This patch fixes an issue that mdio_bus_phy_resume() doesn't call
phy_resume() if the PHY is not attached.

Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 20d1be2b070b..16a94f5b8073 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -76,7 +76,7 @@ static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
 #ifdef CONFIG_PM
-static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
+static bool mdio_bus_phy_may_suspend(struct phy_device *phydev, bool suspend)
 {
 	struct device_driver *drv = phydev->mdio.dev.driver;
 	struct phy_driver *phydrv = to_phy_driver(drv);
@@ -88,10 +88,11 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 	/* PHY not attached? May suspend if the PHY has not already been
 	 * suspended as part of a prior call to phy_disconnect() ->
 	 * phy_detach() -> phy_suspend() because the parent netdev might be the
-	 * MDIO bus driver and clock gated at this point.
+	 * MDIO bus driver and clock gated at this point. Also may resume if
+	 * PHY is not attached.
 	 */
 	if (!netdev)
-		return !phydev->suspended;
+		return suspend ? !phydev->suspended : phydev->suspended;
 
 	if (netdev->wol_enabled)
 		return false;
@@ -126,7 +127,7 @@ static int mdio_bus_phy_suspend(struct device *dev)
 	if (phydev->attached_dev && phydev->adjust_link)
 		phy_stop_machine(phydev);
 
-	if (!mdio_bus_phy_may_suspend(phydev))
+	if (!mdio_bus_phy_may_suspend(phydev, true))
 		return 0;
 
 	return phy_suspend(phydev);
@@ -137,7 +138,7 @@ static int mdio_bus_phy_resume(struct device *dev)
 	struct phy_device *phydev = to_phy_device(dev);
 	int ret;
 
-	if (!mdio_bus_phy_may_suspend(phydev))
+	if (!mdio_bus_phy_may_suspend(phydev, false))
 		goto no_resume;
 
 	ret = phy_resume(phydev);
-- 
2.19.1

RE: [PATCH AUTOSEL 4.19 44/73] net: phy: Fix not to call phy_resume() if PHY is not attached

[Yoshihiro Shimoda]

Hi,

> From: Sasha Levin, Sent: Thursday, December 13, 2018 1:28 PM
> 
> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> 
> [ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ]

This upstream commit is also reverted on mainline
as I mentioned other email thread[1]

[1]
https://lore.kernel.org/lkml/OSAPR01MB2290FE36AF50B2F29170383DD8A00@OSAPR01MB2290.jpnprd01.prod.outlook.com/T/#u

Best regards,
Yoshihiro Shimoda

> This patch fixes an issue that mdio_bus_phy_resume() doesn't call
> phy_resume() if the PHY is not attached.
> 
> Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/net/phy/phy_device.c | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 20d1be2b070b..16a94f5b8073 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -76,7 +76,7 @@ static LIST_HEAD(phy_fixup_list);
>  static DEFINE_MUTEX(phy_fixup_lock);
> 
>  #ifdef CONFIG_PM
> -static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
> +static bool mdio_bus_phy_may_suspend(struct phy_device *phydev, bool suspend)
>  {
>  	struct device_driver *drv = phydev->mdio.dev.driver;
>  	struct phy_driver *phydrv = to_phy_driver(drv);
> @@ -88,10 +88,11 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
>  	/* PHY not attached? May suspend if the PHY has not already been
>  	 * suspended as part of a prior call to phy_disconnect() ->
>  	 * phy_detach() -> phy_suspend() because the parent netdev might be the
> -	 * MDIO bus driver and clock gated at this point.
> +	 * MDIO bus driver and clock gated at this point. Also may resume if
> +	 * PHY is not attached.
>  	 */
>  	if (!netdev)
> -		return !phydev->suspended;
> +		return suspend ? !phydev->suspended : phydev->suspended;
> 
>  	if (netdev->wol_enabled)
>  		return false;
> @@ -126,7 +127,7 @@ static int mdio_bus_phy_suspend(struct device *dev)
>  	if (phydev->attached_dev && phydev->adjust_link)
>  		phy_stop_machine(phydev);
> 
> -	if (!mdio_bus_phy_may_suspend(phydev))
> +	if (!mdio_bus_phy_may_suspend(phydev, true))
>  		return 0;
> 
>  	return phy_suspend(phydev);
> @@ -137,7 +138,7 @@ static int mdio_bus_phy_resume(struct device *dev)
>  	struct phy_device *phydev = to_phy_device(dev);
>  	int ret;
> 
> -	if (!mdio_bus_phy_may_suspend(phydev))
> +	if (!mdio_bus_phy_may_suspend(phydev, false))
>  		goto no_resume;
> 
>  	ret = phy_resume(phydev);
> --
> 2.19.1

Re: [PATCH AUTOSEL 4.19 44/73] net: phy: Fix not to call phy_resume() if PHY is not attached

[Sasha Levin]

On Thu, Dec 13, 2018 at 04:48:07AM +0000, Yoshihiro Shimoda wrote:
>Hi,
>
>> From: Sasha Levin, Sent: Thursday, December 13, 2018 1:28 PM
>>
>> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
>>
>> [ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ]
>
>This upstream commit is also reverted on mainline
>as I mentioned other email thread[1]
>
>[1]
>https://lore.kernel.org/lkml/OSAPR01MB2290FE36AF50B2F29170383DD8A00@OSAPR01MB2290.jpnprd01.prod.outlook.com/T/#u

I've dropped this commit, thank you!

--
Thanks,
Sasha

Re: [PATCH AUTOSEL 4.19 44/73] net: phy: Fix not to call phy_resume() if PHY is not attached

[Sasha Levin]

On Thu, Dec 13, 2018 at 04:48:07AM +0000, Yoshihiro Shimoda wrote:
>Hi,
>
>> From: Sasha Levin, Sent: Thursday, December 13, 2018 1:28 PM
>>
>> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
>>
>> [ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ]
>
>This upstream commit is also reverted on mainline
>as I mentioned other email thread[1]
>
>[1]
>https://lore.kernel.org/lkml/OSAPR01MB2290FE36AF50B2F29170383DD8A00@OSAPR01MB2290.jpnprd01.prod.outlook.com/T/#u

I've dropped this commit, thank you!

[PATCH AUTOSEL 4.19 45/73] net: phy: micrel: add toggling phy reset if PHY is not attached

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit 8c85f4b81296a530b8af2796c110fa482ac42d4f ]

This patch adds toggling phy reset if PHY is not attached. Otherwise,
some boards (e.g. R-Car H3 Salvator-XS) cannot link up correctly if
we do the following method:

 1) Kernel boots by using initramfs.
 --> No open the nic, so phy_device_register() and phy_probe()
     deasserts the reset.
 2) Kernel enters the suspend.
 --> So, keep the reset signal as deassert.
 --> On R-Car Salvator-XS board, unfortunately, the board power is
     turned off.
 3) Kernel returns from suspend.
 4) ifconfig eth0 up
 --> Then, since edge signal of the reset doesn't happen,
     it cannot link up.
 5) ifconfig eth0 down
 6) ifconfig eth0 up
 --> In this case, it can link up.

Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/micrel.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 3db06b40580d..327f00034d01 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -23,6 +23,7 @@
  *			 ksz9477
  */
 
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/phy.h>
@@ -725,6 +726,13 @@ static int kszphy_resume(struct phy_device *phydev)
 {
 	int ret;
 
+	if (!phydev->attached_dev) {
+		/* If the PHY is not attached, toggle the reset */
+		phy_device_reset(phydev, 1);
+		udelay(1);
+		phy_device_reset(phydev, 0);
+	}
+
 	genphy_resume(phydev);
 
 	ret = kszphy_config_reset(phydev);
-- 
2.19.1

RE: [PATCH AUTOSEL 4.19 45/73] net: phy: micrel: add toggling phy reset if PHY is not attached

[Yoshihiro Shimoda]

Hi,

> From: Sasha Levin <sashal@kernel.org>, Sent: Thursday, December 13, 2018 1:28 PM
> 
> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> 
> [ Upstream commit 8c85f4b81296a530b8af2796c110fa482ac42d4f ]

Since this upstream commit are reverted by the following commit,
we should not backport it.

---
commit 7b566f70e1bf65b189b66eb3de6f431c30f7dff2
Author: David S. Miller <davem@davemloft.net>
Date:   Tue Dec 4 08:47:44 2018 -0800

    phy: Revert toggling reset changes.

    This reverts:

    ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached
    8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not  attac

    Andrew Lunn informs me that there are alternative efforts
    underway to fix this more properly.

    Signed-off-by: David S. Miller <davem@davemloft.net>
---

Best regards,
Yoshihiro Shimoda

> This patch adds toggling phy reset if PHY is not attached. Otherwise,
> some boards (e.g. R-Car H3 Salvator-XS) cannot link up correctly if
> we do the following method:
> 
>  1) Kernel boots by using initramfs.
>  --> No open the nic, so phy_device_register() and phy_probe()
>      deasserts the reset.
>  2) Kernel enters the suspend.
>  --> So, keep the reset signal as deassert.
>  --> On R-Car Salvator-XS board, unfortunately, the board power is
>      turned off.
>  3) Kernel returns from suspend.
>  4) ifconfig eth0 up
>  --> Then, since edge signal of the reset doesn't happen,
>      it cannot link up.
>  5) ifconfig eth0 down
>  6) ifconfig eth0 up
>  --> In this case, it can link up.
> 
> Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/net/phy/micrel.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 3db06b40580d..327f00034d01 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -23,6 +23,7 @@
>   *			 ksz9477
>   */
> 
> +#include <linux/delay.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/phy.h>
> @@ -725,6 +726,13 @@ static int kszphy_resume(struct phy_device *phydev)
>  {
>  	int ret;
> 
> +	if (!phydev->attached_dev) {
> +		/* If the PHY is not attached, toggle the reset */
> +		phy_device_reset(phydev, 1);
> +		udelay(1);
> +		phy_device_reset(phydev, 0);
> +	}
> +
>  	genphy_resume(phydev);
> 
>  	ret = kszphy_config_reset(phydev);
> --
> 2.19.1

Re: [PATCH AUTOSEL 4.19 45/73] net: phy: micrel: add toggling phy reset if PHY is not attached

[Sasha Levin]

On Thu, Dec 13, 2018 at 04:44:41AM +0000, Yoshihiro Shimoda wrote:
>Hi,
>
>> From: Sasha Levin <sashal@kernel.org>, Sent: Thursday, December 13, 2018 1:28 PM
>>
>> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
>>
>> [ Upstream commit 8c85f4b81296a530b8af2796c110fa482ac42d4f ]
>
>Since this upstream commit are reverted by the following commit,
>we should not backport it.
>
>---
>commit 7b566f70e1bf65b189b66eb3de6f431c30f7dff2
>Author: David S. Miller <davem@davemloft.net>
>Date:   Tue Dec 4 08:47:44 2018 -0800
>
>    phy: Revert toggling reset changes.
>
>    This reverts:
>
>    ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached
>    8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not  attac
>
>    Andrew Lunn informs me that there are alternative efforts
>    underway to fix this more properly.
>
>    Signed-off-by: David S. Miller <davem@davemloft.net>
>---

I've dropped this commit, thank you!

--
Thanks,
Sasha

Re: [PATCH AUTOSEL 4.19 45/73] net: phy: micrel: add toggling phy reset if PHY is not attached

[Sasha Levin]

On Thu, Dec 13, 2018 at 04:44:41AM +0000, Yoshihiro Shimoda wrote:
>Hi,
>
>> From: Sasha Levin <sashal@kernel.org>, Sent: Thursday, December 13, 2018 1:28 PM
>>
>> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
>>
>> [ Upstream commit 8c85f4b81296a530b8af2796c110fa482ac42d4f ]
>
>Since this upstream commit are reverted by the following commit,
>we should not backport it.
>
>---
>commit 7b566f70e1bf65b189b66eb3de6f431c30f7dff2
>Author: David S. Miller <davem@davemloft.net>
>Date:   Tue Dec 4 08:47:44 2018 -0800
>
>    phy: Revert toggling reset changes.
>
>    This reverts:
>
>    ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached
>    8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not  attac
>
>    Andrew Lunn informs me that there are alternative efforts
>    underway to fix this more properly.
>
>    Signed-off-by: David S. Miller <davem@davemloft.net>
>---

I've dropped this commit, thank you!

[PATCH AUTOSEL 4.19 46/73] macvlan: return correct error value

[Sasha Levin]

From: Matteo Croce <mcroce@redhat.com>

[ Upstream commit 59f997b088d26a774958cb7b17b0763cd82de7ec ]

A MAC address must be unique among all the macvlan devices with the same
lower device. The only exception is the passthru [sic] mode,
which shares the lower device address.

When duplicate addresses are detected, EBUSY is returned when bringing
the interface up:

    # ip link add macvlan0 link eth0 type macvlan
    # read addr </sys/class/net/eth0/address
    # ip link set macvlan0 address $addr
    # ip link set macvlan0 up
    RTNETLINK answers: Device or resource busy

Use correct error code which is EADDRINUSE, and do the check also
earlier, on address change:

    # ip link set macvlan0 address $addr
    RTNETLINK answers: Address already in use

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macvlan.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index cfda146f3b3b..6372cdc4a510 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -608,7 +608,7 @@ static int macvlan_open(struct net_device *dev)
 		goto hash_add;
 	}
 
-	err = -EBUSY;
+	err = -EADDRINUSE;
 	if (macvlan_addr_busy(vlan->port, dev->dev_addr))
 		goto out;
 
@@ -706,7 +706,7 @@ static int macvlan_sync_address(struct net_device *dev, unsigned char *addr)
 	} else {
 		/* Rehash and update the device filters */
 		if (macvlan_addr_busy(vlan->port, addr))
-			return -EBUSY;
+			return -EADDRINUSE;
 
 		if (!macvlan_passthru(port)) {
 			err = dev_uc_add(lowerdev, addr);
@@ -747,6 +747,9 @@ static int macvlan_set_mac_address(struct net_device *dev, void *p)
 		return dev_set_mac_address(vlan->lowerdev, addr);
 	}
 
+	if (macvlan_addr_busy(vlan->port, addr->sa_data))
+		return -EADDRINUSE;
+
 	return macvlan_sync_address(dev, addr->sa_data);
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 47/73] mv88e6060: disable hardware level MAC learning

[Sasha Levin]

From: Anderson Luiz Alves <alacn1@gmail.com>

[ Upstream commit a74515604a7b171f2702bdcbd1e231225fb456d0 ]

Disable hardware level MAC learning because it breaks station roaming.
When enabled it drops all frames that arrive from a MAC address
that is on a different port at learning table.

Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6060.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index 65f10fec25b3..0b3e51f248c2 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -116,8 +116,7 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
 	/* Reset the switch. */
 	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
 		  GLOBAL_ATU_CONTROL_SWRESET |
-		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
-		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
+		  GLOBAL_ATU_CONTROL_LEARNDIS);
 
 	/* Wait up to one second for reset to complete. */
 	timeout = jiffies + 1 * HZ;
@@ -142,13 +141,10 @@ static int mv88e6060_setup_global(struct dsa_switch *ds)
 	 */
 	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
 
-	/* Enable automatic address learning, set the address
-	 * database size to 1024 entries, and set the default aging
-	 * time to 5 minutes.
+	/* Disable automatic address learning.
 	 */
 	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
-		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
-		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
+		  GLOBAL_ATU_CONTROL_LEARNDIS);
 
 	return 0;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 48/73] net/mlx4_en: Change min MTU size to ETH_MIN_MTU

[Sasha Levin]

From: Eran Ben Elisha <eranbe@mellanox.com>

[ Upstream commit 24be19e47779d604d1492c114459dca9a92acf78 ]

NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in
the RFC791 and in the network stack. Remove old mlx4_en only define for
it, which was set to wrong value.

Fixes: b80f71f5816f ("ethernet/mellanox: use core min/max MTU checking")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ++--
 drivers/net/ethernet/mellanox/mlx4/mlx4_en.h   | 1 -
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index fe49384eba48..0d7fd3f043cf 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -3494,8 +3494,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 		dev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM;
 	}
 
-	/* MTU range: 46 - hw-specific max */
-	dev->min_mtu = MLX4_EN_MIN_MTU;
+	/* MTU range: 68 - hw-specific max */
+	dev->min_mtu = ETH_MIN_MTU;
 	dev->max_mtu = priv->max_mtu;
 
 	mdev->pndev[port] = dev;
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index c3228b89df46..240f9c9ca943 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -161,7 +161,6 @@
 #define MLX4_SELFTEST_LB_MIN_MTU (MLX4_LOOPBACK_TEST_PAYLOAD + NET_IP_ALIGN + \
 				  ETH_HLEN + PREAMBLE_LEN)
 
-#define MLX4_EN_MIN_MTU		46
 /* VLAN_HLEN is added twice,to support skb vlan tagged with multiple
  * headers. (For example: ETH_P_8021Q and ETH_P_8021AD).
  */
-- 
2.19.1

[PATCH AUTOSEL 4.19 49/73] net/mlx4_en: Fix build break when CONFIG_INET is off

[Sasha Levin]

From: Saeed Mahameed <saeedm@mellanox.com>

[ Upstream commit 1b603f9e4313348608f256b564ed6e3d9e67f377 ]

MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs.
Make sure they are listed in MLX4_EN Kconfig dependencies.

This fixes the following build break:

drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default]
struct iphdr *iph)
^
drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’:
drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type
_u8 ipproto = iph->protocol;

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index 36054e6fb9d3..f200b8c420d5 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -5,7 +5,7 @@
 config MLX4_EN
 	tristate "Mellanox Technologies 1/10/40Gbit Ethernet support"
 	depends on MAY_USE_DEVLINK
-	depends on PCI
+	depends on PCI && NETDEVICES && ETHERNET && INET
 	select MLX4_CORE
 	imply PTP_1588_CLOCK
 	---help---
-- 
2.19.1

[PATCH AUTOSEL 4.19 50/73] bpf: check pending signals while verifying programs

[Sasha Levin]

From: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit c3494801cd1785e2c25f1a5735fa19ddcf9665da ]

Malicious user space may try to force the verifier to use as much cpu
time and memory as possible. Hence check for pending signals
while verifying the program.
Note that suspend of sys_bpf(PROG_LOAD) syscall will lead to EAGAIN,
since the kernel has to release the resources used for program verification.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 5780876ac81a..a320e6587dd3 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -4792,6 +4792,9 @@ static int do_check(struct bpf_verifier_env *env)
 			goto process_bpf_exit;
 		}
 
+		if (signal_pending(current))
+			return -EAGAIN;
+
 		if (need_resched())
 			cond_resched();
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 51/73] ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handling

[Sasha Levin]

From: Chris Cole <chris@sageembedded.com>

[ Upstream commit a1208f6a822ac29933e772ef1f637c5d67838da9 ]

This patch addresses possible memory corruption when
v7_dma_inv_range(start_address, end_address) address parameters are not
aligned to whole cache lines. This function issues "invalidate" cache
management operations to all cache lines from start_address (inclusive)
to end_address (exclusive). When start_address and/or end_address are
not aligned, the start and/or end cache lines are first issued "clean &
invalidate" operation. The assumption is this is done to ensure that any
dirty data addresses outside the address range (but part of the first or
last cache lines) are cleaned/flushed so that data is not lost, which
could happen if just an invalidate is issued.

The problem is that these first/last partial cache lines are issued
"clean & invalidate" and then "invalidate". This second "invalidate" is
not required and worse can cause "lost" writes to addresses outside the
address range but part of the cache line. If another component writes to
its part of the cache line between the "clean & invalidate" and
"invalidate" operations, the write can get lost. This fix is to remove
the extra "invalidate" operation when unaligned addressed are used.

A kernel module is available that has a stress test to reproduce the
issue and a unit test of the updated v7_dma_inv_range(). It can be
downloaded from
http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz.

v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction)
when the direction is DMA_FROM_DEVICE. One can (I believe) successfully
argue that DMA from a device to main memory should use buffers aligned
to cache line size, because the "clean & invalidate" might overwrite
data that the device just wrote using DMA. But if a driver does use
unaligned buffers, at least this fix will prevent memory corruption
outside the buffer.

Signed-off-by: Chris Cole <chris@sageembedded.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/cache-v7.S | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 215df435bfb9..2149b47a0c5a 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -360,14 +360,16 @@ v7_dma_inv_range:
 	ALT_UP(W(nop))
 #endif
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
+	addne	r0, r0, r2
 
 	tst	r1, r3
 	bic	r1, r1, r3
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D / U line
-1:
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
-	add	r0, r0, r2
 	cmp	r0, r1
+1:
+	mcrlo	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
+	addlo	r0, r0, r2
+	cmplo	r0, r1
 	blo	1b
 	dsb	st
 	ret	lr
-- 
2.19.1

[PATCH AUTOSEL 4.19 52/73] ARM: 8815/1: V7M: align v7m_dma_inv_range() with v7 counterpart

[Sasha Levin]

From: Vladimir Murzin <vladimir.murzin@arm.com>

[ Upstream commit 3d0358d0ba048c5afb1385787aaec8fa5ad78fcc ]

Chris has discovered and reported that v7_dma_inv_range() may corrupt
memory if address range is not aligned to cache line size.

Since the whole cache-v7m.S was lifted form cache-v7.S the same
observation applies to v7m_dma_inv_range(). So the fix just mirrors
what has been done for v7 with a little specific of M-class.

Cc: Chris Cole <chris@sageembedded.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/cache-v7m.S | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mm/cache-v7m.S b/arch/arm/mm/cache-v7m.S
index 788486e830d3..32aa2a2aa260 100644
--- a/arch/arm/mm/cache-v7m.S
+++ b/arch/arm/mm/cache-v7m.S
@@ -73,9 +73,11 @@
 /*
  * dcimvac: Invalidate data cache line by MVA to PoC
  */
-.macro dcimvac, rt, tmp
-	v7m_cacheop \rt, \tmp, V7M_SCB_DCIMVAC
+.irp    c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
+.macro dcimvac\c, rt, tmp
+	v7m_cacheop \rt, \tmp, V7M_SCB_DCIMVAC, \c
 .endm
+.endr
 
 /*
  * dccmvau: Clean data cache line by MVA to PoU
@@ -369,14 +371,16 @@ v7m_dma_inv_range:
 	tst	r0, r3
 	bic	r0, r0, r3
 	dccimvacne r0, r3
+	addne	r0, r0, r2
 	subne	r3, r2, #1	@ restore r3, corrupted by v7m's dccimvac
 	tst	r1, r3
 	bic	r1, r1, r3
 	dccimvacne r1, r3
-1:
-	dcimvac r0, r3
-	add	r0, r0, r2
 	cmp	r0, r1
+1:
+	dcimvaclo r0, r3
+	addlo	r0, r0, r2
+	cmplo	r0, r1
 	blo	1b
 	dsb	st
 	ret	lr
-- 
2.19.1

[PATCH AUTOSEL 4.19 53/73] ARM: 8816/1: dma-mapping: fix potential uninitialized return

[Sasha Levin]

From: Nathan Jones <nathanj439@gmail.com>

[ Upstream commit c2a3831df6dc164af66d8d86cf356a90c021b86f ]

While trying to use the dma_mmap_*() interface, it was noticed that this
interface returns strange values when passed an incorrect length.

If neither of the if() statements fire then the return value is
uninitialized. In the worst case it returns 0 which means the caller
will think the function succeeded.

Fixes: 1655cf8829d8 ("ARM: dma-mapping: Remove traces of NOMMU code")
Signed-off-by: Nathan Jones <nathanj439@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/dma-mapping.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 66566472c153..1cb9c0f9b5d6 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -830,7 +830,7 @@ static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
 		 unsigned long attrs)
 {
-	int ret;
+	int ret = -ENXIO;
 	unsigned long nr_vma_pages = vma_pages(vma);
 	unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	unsigned long pfn = dma_to_pfn(dev, dma_addr);
-- 
2.19.1

[PATCH AUTOSEL 4.19 54/73] ethernet: fman: fix wrong of_node_put() in probe function

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit ecb239d96d369c23c33d41708646df646de669f4 ]

After getting a reference to the platform device's of_node the probe
function ends up calling of_find_matching_node() using the node as an
argument. The function takes care of decreasing the refcount on it. We
are then incorrectly decreasing the refcount on that node again.

This patch removes the unwarranted call to of_node_put().

Fixes: 414fd46e7762 ("fsl/fman: Add FMan support")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fman/fman.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c
index c415ac67cb7b..e80fedb27cee 100644
--- a/drivers/net/ethernet/freescale/fman/fman.c
+++ b/drivers/net/ethernet/freescale/fman/fman.c
@@ -2786,7 +2786,7 @@ static struct fman *read_dts_node(struct platform_device *of_dev)
 	if (!muram_node) {
 		dev_err(&of_dev->dev, "%s: could not find MURAM node\n",
 			__func__);
-		goto fman_node_put;
+		goto fman_free;
 	}
 
 	err = of_address_to_resource(muram_node, 0,
@@ -2795,11 +2795,10 @@ static struct fman *read_dts_node(struct platform_device *of_dev)
 		of_node_put(muram_node);
 		dev_err(&of_dev->dev, "%s: of_address_to_resource() = %d\n",
 			__func__, err);
-		goto fman_node_put;
+		goto fman_free;
 	}
 
 	of_node_put(muram_node);
-	of_node_put(fm_node);
 
 	err = devm_request_irq(&of_dev->dev, irq, fman_irq, IRQF_SHARED,
 			       "fman", fman);
-- 
2.19.1

[PATCH AUTOSEL 4.19 55/73] thermal: armada: fix legacy validity test sense

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 70bb27b79adf63ea39e37371d09c823c7a8f93ce ]

Commit 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid()
pointer") removed the unnecessary indirection through a function
pointer, but in doing so, also removed the negation operator too:

-       if (priv->data->is_valid && !priv->data->is_valid(priv)) {
+       if (armada_is_valid(priv)) {

which results in:

armada_thermal f06f808c.thermal: Temperature sensor reading not valid
armada_thermal f2400078.thermal: Temperature sensor reading not valid
armada_thermal f4400078.thermal: Temperature sensor reading not valid

at boot, or whenever the "temp" sysfs file is read.  Replace the
negation operator.

Fixes: 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/armada_thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 2c2f6d93034e..e16b3cb1808c 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -357,7 +357,7 @@ static int armada_get_temp_legacy(struct thermal_zone_device *thermal,
 	int ret;
 
 	/* Valid check */
-	if (armada_is_valid(priv)) {
+	if (!armada_is_valid(priv)) {
 		dev_err(priv->dev,
 			"Temperature sensor reading not valid\n");
 		return -EIO;
-- 
2.19.1

[PATCH AUTOSEL 4.19 56/73] net: mvpp2: fix detection of 10G SFP modules

[Sasha Levin]

From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit 01b3fd5ac97caffb8e5d5bd85086da33db3b361f ]

The mvpp2_phylink_validate() relies on the interface field of
phylink_link_state to determine valid link modes. However, when called
from phylink_sfp_module_insert() this field in not initialized. The
default switch case then excludes 10G link modes. This allows 10G SFP
modules that are detected correctly to be configured at max rate of
2.5G.

Catch the uninitialized PHY mode case, and allow 10G rates.

Fixes: d97c9f4ab000b ("net: mvpp2: 1000baseX support")
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index a74002b43b51..1b3b64fea038 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4271,6 +4271,7 @@ static void mvpp2_phylink_validate(struct net_device *dev,
 
 	switch (state->interface) {
 	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_NA:
 		phylink_set(mask, 10000baseCR_Full);
 		phylink_set(mask, 10000baseSR_Full);
 		phylink_set(mask, 10000baseLR_Full);
-- 
2.19.1

[PATCH AUTOSEL 4.19 57/73] net: mvpp2: fix phylink handling of invalid PHY modes

[Sasha Levin]

From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit 0fb628f0f250c74b1023edd0ca4a57c8b35b9b2c ]

The .validate phylink callback should empty the supported bitmap when
the interface mode is invalid.

Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   | 33 ++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 1b3b64fea038..6320e080b831 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4262,8 +4262,27 @@ static void mvpp2_phylink_validate(struct net_device *dev,
 				   unsigned long *supported,
 				   struct phylink_link_state *state)
 {
+	struct mvpp2_port *port = netdev_priv(dev);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 
+	/* Invalid combinations */
+	switch (state->interface) {
+	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_XAUI:
+		if (port->gop_id != 0)
+			goto empty_set;
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		if (port->gop_id == 0)
+			goto empty_set;
+		break;
+	default:
+		break;
+	}
+
 	phylink_set(mask, Autoneg);
 	phylink_set_port_modes(mask);
 	phylink_set(mask, Pause);
@@ -4271,6 +4290,7 @@ static void mvpp2_phylink_validate(struct net_device *dev,
 
 	switch (state->interface) {
 	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_XAUI:
 	case PHY_INTERFACE_MODE_NA:
 		phylink_set(mask, 10000baseCR_Full);
 		phylink_set(mask, 10000baseSR_Full);
@@ -4279,7 +4299,11 @@ static void mvpp2_phylink_validate(struct net_device *dev,
 		phylink_set(mask, 10000baseER_Full);
 		phylink_set(mask, 10000baseKR_Full);
 		/* Fall-through */
-	default:
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_SGMII:
 		phylink_set(mask, 10baseT_Half);
 		phylink_set(mask, 10baseT_Full);
 		phylink_set(mask, 100baseT_Half);
@@ -4291,11 +4315,18 @@ static void mvpp2_phylink_validate(struct net_device *dev,
 		phylink_set(mask, 1000baseT_Full);
 		phylink_set(mask, 1000baseX_Full);
 		phylink_set(mask, 2500baseX_Full);
+		break;
+	default:
+		goto empty_set;
 	}
 
 	bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
 	bitmap_and(state->advertising, state->advertising, mask,
 		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+	return;
+
+empty_set:
+	bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
 }
 
 static void mvpp22_xlg_link_state(struct mvpp2_port *port,
-- 
2.19.1

[PATCH AUTOSEL 4.19 58/73] x86/build: Fix compiler support check for CONFIG_RETPOLINE

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit 25896d073d8a0403b07e6dec56f58e6c33678207 ]

It is troublesome to add a diagnostic like this to the Makefile
parse stage because the top-level Makefile could be parsed with
a stale include/config/auto.conf.

Once you are hit by the error about non-retpoline compiler, the
compilation still breaks even after disabling CONFIG_RETPOLINE.

The easiest fix is to move this check to the "archprepare" like
this commit did:

  829fe4aa9ac1 ("x86: Allow generating user-space headers without a compiler")

Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support")
Link: http://lkml.kernel.org/r/1543991239-18476-1-git-send-email-yamada.masahiro@socionext.com
Link: https://lkml.org/lkml/2018/12/4/206
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Makefile | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 9298f0f3817a..b84f61bc5e7a 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -223,9 +223,6 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
 
 # Avoid indirect branches in kernel to deal with Spectre
 ifdef CONFIG_RETPOLINE
-ifeq ($(RETPOLINE_CFLAGS),)
-  $(error You are building kernel with non-retpoline compiler, please update your compiler.)
-endif
   KBUILD_CFLAGS += $(RETPOLINE_CFLAGS)
 endif
 
@@ -303,6 +300,13 @@ ifndef CC_HAVE_ASM_GOTO
 	@echo Compiler lacks asm-goto support.
 	@exit 1
 endif
+ifdef CONFIG_RETPOLINE
+ifeq ($(RETPOLINE_CFLAGS),)
+	@echo "You are building kernel with non-retpoline compiler." >&2
+	@echo "Please update your compiler." >&2
+	@false
+endif
+endif
 
 archclean:
 	$(Q)rm -rf $(objtree)/arch/i386
-- 
2.19.1

Re: [PATCH AUTOSEL 4.19 58/73] x86/build: Fix compiler support check for CONFIG_RETPOLINE

[Gi-Oh Kim]

On Thu, Dec 13, 2018 at 5:47 AM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Masahiro Yamada <yamada.masahiro@socionext.com>
>
> [ Upstream commit 25896d073d8a0403b07e6dec56f58e6c33678207 ]
>
> It is troublesome to add a diagnostic like this to the Makefile
> parse stage because the top-level Makefile could be parsed with
> a stale include/config/auto.conf.
>
> Once you are hit by the error about non-retpoline compiler, the
> compilation still breaks even after disabling CONFIG_RETPOLINE.
>
> The easiest fix is to move this check to the "archprepare" like
> this commit did:
>
>   829fe4aa9ac1 ("x86: Allow generating user-space headers without a compiler")
>
> Reported-by: Meelis Roos <mroos@linux.ee>
> Tested-by: Meelis Roos <mroos@linux.ee>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: Linus Torvalds <torvalds@linux-foundation.org>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
> Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support")
> Link: http://lkml.kernel.org/r/1543991239-18476-1-git-send-email-yamada.masahiro@socionext.com
> Link: https://lkml.org/lkml/2018/12/4/206
> Signed-off-by: Ingo Molnar <mingo@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  arch/x86/Makefile | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/arch/x86/Makefile b/arch/x86/Makefile
> index 9298f0f3817a..b84f61bc5e7a 100644
> --- a/arch/x86/Makefile
> +++ b/arch/x86/Makefile
> @@ -223,9 +223,6 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
>
>  # Avoid indirect branches in kernel to deal with Spectre
>  ifdef CONFIG_RETPOLINE
> -ifeq ($(RETPOLINE_CFLAGS),)
> -  $(error You are building kernel with non-retpoline compiler, please update your compiler.)
> -endif
>    KBUILD_CFLAGS += $(RETPOLINE_CFLAGS)
>  endif
>
> @@ -303,6 +300,13 @@ ifndef CC_HAVE_ASM_GOTO
>         @echo Compiler lacks asm-goto support.
>         @exit 1
>  endif
> +ifdef CONFIG_RETPOLINE
> +ifeq ($(RETPOLINE_CFLAGS),)
> +       @echo "You are building kernel with non-retpoline compiler." >&2
> +       @echo "Please update your compiler." >&2
> +       @false
> +endif
> +endif
>
>  archclean:
>         $(Q)rm -rf $(objtree)/arch/i386
> --
> 2.19.1
>


Hi Greg,

I think this patch needs to be merged to linux-stable 4.14.y branch.
I found out the same problem when I built my drivers on linux-stable 4.14.86.
Following is what I did to reproduce the problem.
The problem is gone after applying the patch.

1. I created and installed a headers package as following.
make -j7 deb-pkg
cd ..
sudo dpkg -i linux-headers-4.14.89+_4.14.89+-18_amd64.deb

2. I managed to re-produce the same problem as following.
gohkim@ws00837:~/study/drv$ make -C /usr/src/linux-headers-4.14.89+/
kernelrelease
make: Entering directory '/usr/src/linux-headers-4.14.89+'
arch/x86/Makefile:245: *** You are building kernel with non-retpoline
compiler, please update your compiler.. Stop.
make: Leaving directory '/usr/src/linux-headers-4.14.89+'

3. Weird thing is that it works fine if I use sudo command.
gohkim@ws00837:~/study/drv$ sudo make -C
/usr/src/linux-headers-4.14.89+/ kernelrelease
make: Entering directory '/usr/src/linux-headers-4.14.89+'
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
scripts/kconfig/conf  --silentoldconfig Kconfig
4.14.89
make: Leaving directory '/usr/src/linux-headers-4.14.89+'


-- 
GIOH KIM
Linux Kernel Entwickler

1&1 IONOS Cloud GmbH
Greifswalder Str. 207
D - 10405 Berlin

Tel:       +49 176 2697 8962
Fax:      +49 30 577 008 299
Email:    gi-oh.kim@cloud.ionos.com
URL:      https://www.ionos.com

Sitz der Gesellschaft: Berlin
Registergericht: Amtsgericht Charlottenburg, HRB 125506 B
Geschäftsführer: Achim Weiss, Matthias Steinberg, Christoph Steffens

Re: [PATCH AUTOSEL 4.19 58/73] x86/build: Fix compiler support check for CONFIG_RETPOLINE

[Greg KH]

On Tue, Dec 18, 2018 at 02:26:29PM +0100, Gi-Oh Kim wrote:
> On Thu, Dec 13, 2018 at 5:47 AM Sasha Levin <sashal@kernel.org> wrote:
> >
> > From: Masahiro Yamada <yamada.masahiro@socionext.com>
> >
> > [ Upstream commit 25896d073d8a0403b07e6dec56f58e6c33678207 ]
> >
> > It is troublesome to add a diagnostic like this to the Makefile
> > parse stage because the top-level Makefile could be parsed with
> > a stale include/config/auto.conf.
> >
> > Once you are hit by the error about non-retpoline compiler, the
> > compilation still breaks even after disabling CONFIG_RETPOLINE.
> >
> > The easiest fix is to move this check to the "archprepare" like
> > this commit did:
> >
> >   829fe4aa9ac1 ("x86: Allow generating user-space headers without a compiler")
> >
> > Reported-by: Meelis Roos <mroos@linux.ee>
> > Tested-by: Meelis Roos <mroos@linux.ee>
> > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > Acked-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
> > Cc: Borislav Petkov <bp@alien8.de>
> > Cc: Linus Torvalds <torvalds@linux-foundation.org>
> > Cc: Peter Zijlstra <peterz@infradead.org>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
> > Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support")
> > Link: http://lkml.kernel.org/r/1543991239-18476-1-git-send-email-yamada.masahiro@socionext.com
> > Link: https://lkml.org/lkml/2018/12/4/206
> > Signed-off-by: Ingo Molnar <mingo@kernel.org>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> > ---
> >  arch/x86/Makefile | 10 +++++++---
> >  1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/x86/Makefile b/arch/x86/Makefile
> > index 9298f0f3817a..b84f61bc5e7a 100644
> > --- a/arch/x86/Makefile
> > +++ b/arch/x86/Makefile
> > @@ -223,9 +223,6 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
> >
> >  # Avoid indirect branches in kernel to deal with Spectre
> >  ifdef CONFIG_RETPOLINE
> > -ifeq ($(RETPOLINE_CFLAGS),)
> > -  $(error You are building kernel with non-retpoline compiler, please update your compiler.)
> > -endif
> >    KBUILD_CFLAGS += $(RETPOLINE_CFLAGS)
> >  endif
> >
> > @@ -303,6 +300,13 @@ ifndef CC_HAVE_ASM_GOTO
> >         @echo Compiler lacks asm-goto support.
> >         @exit 1
> >  endif
> > +ifdef CONFIG_RETPOLINE
> > +ifeq ($(RETPOLINE_CFLAGS),)
> > +       @echo "You are building kernel with non-retpoline compiler." >&2
> > +       @echo "Please update your compiler." >&2
> > +       @false
> > +endif
> > +endif
> >
> >  archclean:
> >         $(Q)rm -rf $(objtree)/arch/i386
> > --
> > 2.19.1
> >
> 
> 
> Hi Greg,
> 
> I think this patch needs to be merged to linux-stable 4.14.y branch.
> I found out the same problem when I built my drivers on linux-stable 4.14.86.
> Following is what I did to reproduce the problem.
> The problem is gone after applying the patch.

Yes, it needs to get into 4.19.y now as well, I've queued it up.

thanks,

greg k-h

[PATCH AUTOSEL 4.19 59/73] drm/amdgpu/vcn: Update vcn.cur_state during suspend

[Sasha Levin]

From: James Zhu <James.Zhu@amd.com>

[ Upstream commit 0a9b89b2e2e7b6d90f81ddc47e489be1043e01b1 ]

Replace vcn_v1_0_stop with vcn_v1_0_set_powergating_state during suspend,
to keep adev->vcn.cur_state update. It will fix VCN S3 hung issue.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
index 072371ef5975..4f8f3bb21832 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
@@ -43,6 +43,7 @@ static void vcn_v1_0_set_enc_ring_funcs(struct amdgpu_device *adev);
 static void vcn_v1_0_set_jpeg_ring_funcs(struct amdgpu_device *adev);
 static void vcn_v1_0_set_irq_funcs(struct amdgpu_device *adev);
 static void vcn_v1_0_jpeg_ring_set_patch_ring(struct amdgpu_ring *ring, uint32_t ptr);
+static int vcn_v1_0_set_powergating_state(void *handle, enum amd_powergating_state state);
 
 /**
  * vcn_v1_0_early_init - set function pointers
@@ -216,7 +217,7 @@ static int vcn_v1_0_hw_fini(void *handle)
 	struct amdgpu_ring *ring = &adev->vcn.ring_dec;
 
 	if (RREG32_SOC15(VCN, 0, mmUVD_STATUS))
-		vcn_v1_0_stop(adev);
+		vcn_v1_0_set_powergating_state(adev, AMD_PG_STATE_GATE);
 
 	ring->ready = false;
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 60/73] tools/testing/nvdimm: Align test resources to 128M

[Sasha Levin]

From: Dan Williams <dan.j.williams@intel.com>

[ Upstream commit e3f5df762d4a6ef6326c3c09bc9f89ea8a2eab2c ]

In preparation for libnvdimm growing new restrictions to detect section
conflicts between persistent memory regions, enable nfit_test to
allocate aligned resources. Use a gen_pool to allocate nfit_test's fake
resources in a separate address space from the virtual translation of
the same.

Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/nvdimm/test/nfit.c | 35 ++++++++++++++++++++++++++++++--
 1 file changed, 33 insertions(+), 2 deletions(-)

diff --git a/tools/testing/nvdimm/test/nfit.c b/tools/testing/nvdimm/test/nfit.c
index ec50d2a95076..fa763dbfdad7 100644
--- a/tools/testing/nvdimm/test/nfit.c
+++ b/tools/testing/nvdimm/test/nfit.c
@@ -15,6 +15,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/workqueue.h>
 #include <linux/libnvdimm.h>
+#include <linux/genalloc.h>
 #include <linux/vmalloc.h>
 #include <linux/device.h>
 #include <linux/module.h>
@@ -213,6 +214,8 @@ struct nfit_test {
 
 static struct workqueue_struct *nfit_wq;
 
+static struct gen_pool *nfit_pool;
+
 static struct nfit_test *to_nfit_test(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -1130,6 +1133,9 @@ static void release_nfit_res(void *data)
 	list_del(&nfit_res->list);
 	spin_unlock(&nfit_test_lock);
 
+	if (resource_size(&nfit_res->res) >= DIMM_SIZE)
+		gen_pool_free(nfit_pool, nfit_res->res.start,
+				resource_size(&nfit_res->res));
 	vfree(nfit_res->buf);
 	kfree(nfit_res);
 }
@@ -1142,7 +1148,7 @@ static void *__test_alloc(struct nfit_test *t, size_t size, dma_addr_t *dma,
 			GFP_KERNEL);
 	int rc;
 
-	if (!buf || !nfit_res)
+	if (!buf || !nfit_res || !*dma)
 		goto err;
 	rc = devm_add_action(dev, release_nfit_res, nfit_res);
 	if (rc)
@@ -1162,6 +1168,8 @@ static void *__test_alloc(struct nfit_test *t, size_t size, dma_addr_t *dma,
 
 	return nfit_res->buf;
  err:
+	if (*dma && size >= DIMM_SIZE)
+		gen_pool_free(nfit_pool, *dma, size);
 	if (buf)
 		vfree(buf);
 	kfree(nfit_res);
@@ -1170,9 +1178,16 @@ static void *__test_alloc(struct nfit_test *t, size_t size, dma_addr_t *dma,
 
 static void *test_alloc(struct nfit_test *t, size_t size, dma_addr_t *dma)
 {
+	struct genpool_data_align data = {
+		.align = SZ_128M,
+	};
 	void *buf = vmalloc(size);
 
-	*dma = (unsigned long) buf;
+	if (size >= DIMM_SIZE)
+		*dma = gen_pool_alloc_algo(nfit_pool, size,
+				gen_pool_first_fit_align, &data);
+	else
+		*dma = (unsigned long) buf;
 	return __test_alloc(t, size, dma, buf);
 }
 
@@ -2837,6 +2852,17 @@ static __init int nfit_test_init(void)
 		goto err_register;
 	}
 
+	nfit_pool = gen_pool_create(ilog2(SZ_4M), NUMA_NO_NODE);
+	if (!nfit_pool) {
+		rc = -ENOMEM;
+		goto err_register;
+	}
+
+	if (gen_pool_add(nfit_pool, SZ_4G, SZ_4G, NUMA_NO_NODE)) {
+		rc = -ENOMEM;
+		goto err_register;
+	}
+
 	for (i = 0; i < NUM_NFITS; i++) {
 		struct nfit_test *nfit_test;
 		struct platform_device *pdev;
@@ -2892,6 +2918,9 @@ static __init int nfit_test_init(void)
 	return 0;
 
  err_register:
+	if (nfit_pool)
+		gen_pool_destroy(nfit_pool);
+
 	destroy_workqueue(nfit_wq);
 	for (i = 0; i < NUM_NFITS; i++)
 		if (instances[i])
@@ -2915,6 +2944,8 @@ static __exit void nfit_test_exit(void)
 	platform_driver_unregister(&nfit_test_driver);
 	nfit_test_teardown();
 
+	gen_pool_destroy(nfit_pool);
+
 	for (i = 0; i < NUM_NFITS; i++)
 		put_device(&instances[i]->pdev.dev);
 	class_destroy(nfit_test_dimm);
-- 
2.19.1

[PATCH AUTOSEL 4.19 61/73] acpi/nfit: Fix user-initiated ARS to be "ARS-long" rather than "ARS-short"

[Sasha Levin]

From: Dan Williams <dan.j.williams@intel.com>

[ Upstream commit b5fd2e00a60248902315fb32210550ac3cb9f44c ]

A "short" ARS (address range scrub) instructs the platform firmware to
return known errors. In contrast, a "long" ARS instructs platform
firmware to arrange every data address on the DIMM to be read / checked
for poisoned data.

The conversion of the flags in commit d3abaf43bab8 "acpi, nfit: Fix
Address Range Scrub completion tracking", changed the meaning of passing
'0' to acpi_nfit_ars_rescan(). Previously '0' meant "not short", now '0'
is ARS_REQ_SHORT. Pass ARS_REQ_LONG to restore the expected scrub-type
behavior of user-initiated ARS sessions.

Fixes: d3abaf43bab8 ("acpi, nfit: Fix Address Range Scrub completion tracking")
Reported-by: Jacek Zloch <jacek.zloch@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/nfit/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index c5d15752dfb3..75b331f8a16a 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -1303,7 +1303,7 @@ static ssize_t scrub_store(struct device *dev,
 	if (nd_desc) {
 		struct acpi_nfit_desc *acpi_desc = to_acpi_desc(nd_desc);
 
-		rc = acpi_nfit_ars_rescan(acpi_desc, 0);
+		rc = acpi_nfit_ars_rescan(acpi_desc, ARS_REQ_LONG);
 	}
 	device_unlock(dev);
 	if (rc)
-- 
2.19.1

[PATCH AUTOSEL 4.19 61/73] acpi/nfit: Fix user-initiated ARS to be "ARS-long" rather than "ARS-short"

[Sasha Levin]

From: Dan Williams <dan.j.williams@intel.com>

[ Upstream commit b5fd2e00a60248902315fb32210550ac3cb9f44c ]

A "short" ARS (address range scrub) instructs the platform firmware to
return known errors. In contrast, a "long" ARS instructs platform
firmware to arrange every data address on the DIMM to be read / checked
for poisoned data.

The conversion of the flags in commit d3abaf43bab8 "acpi, nfit: Fix
Address Range Scrub completion tracking", changed the meaning of passing
'0' to acpi_nfit_ars_rescan(). Previously '0' meant "not short", now '0'
is ARS_REQ_SHORT. Pass ARS_REQ_LONG to restore the expected scrub-type
behavior of user-initiated ARS sessions.

Fixes: d3abaf43bab8 ("acpi, nfit: Fix Address Range Scrub completion tracking")
Reported-by: Jacek Zloch <jacek.zloch@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/nfit/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index c5d15752dfb3..75b331f8a16a 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -1303,7 +1303,7 @@ static ssize_t scrub_store(struct device *dev,
 	if (nd_desc) {
 		struct acpi_nfit_desc *acpi_desc = to_acpi_desc(nd_desc);
 
-		rc = acpi_nfit_ars_rescan(acpi_desc, 0);
+		rc = acpi_nfit_ars_rescan(acpi_desc, ARS_REQ_LONG);
 	}
 	device_unlock(dev);
 	if (rc)
-- 
2.19.1

_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

[PATCH AUTOSEL 4.19 62/73] drm/ast: Fix connector leak during driver unload

[Sasha Levin]

From: Sam Bobroff <sbobroff@linux.ibm.com>

[ Upstream commit e594a5e349ddbfdaca1951bb3f8d72f3f1660d73 ]

When unloading the ast driver, a warning message is printed by
drm_mode_config_cleanup() because a reference is still held to one of
the drm_connector structs.

Correct this by calling drm_crtc_force_disable_all() in
ast_fbdev_destroy().

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e613f3c630c7bbc72e04a44b178259b9164d2f6.1543798395.git.sbobroff@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ast/ast_fb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/ast/ast_fb.c b/drivers/gpu/drm/ast/ast_fb.c
index 0cd827e11fa2..de26df0c6044 100644
--- a/drivers/gpu/drm/ast/ast_fb.c
+++ b/drivers/gpu/drm/ast/ast_fb.c
@@ -263,6 +263,7 @@ static void ast_fbdev_destroy(struct drm_device *dev,
 {
 	struct ast_framebuffer *afb = &afbdev->afb;
 
+	drm_crtc_force_disable_all(dev);
 	drm_fb_helper_unregister_fbi(&afbdev->helper);
 
 	if (afb->obj) {
-- 
2.19.1

[PATCH AUTOSEL 4.19 63/73] cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)

[Sasha Levin]

From: Steve French <stfrench@microsoft.com>

[ Upstream commit 6e785302dad32228819d8066e5376acd15d0e6ba ]

Missing a dependency.  Shouldn't show cifs posix extensions
in Kconfig if CONFIG_CIFS_ALLOW_INSECURE_DIALECTS (ie SMB1
protocol) is disabled.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index abcd78e332fe..85dadb93c992 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -133,7 +133,7 @@ config CIFS_XATTR
 
 config CIFS_POSIX
         bool "CIFS POSIX Extensions"
-        depends on CIFS_XATTR
+        depends on CIFS && CIFS_ALLOW_INSECURE_LEGACY && CIFS_XATTR
         help
           Enabling this option will cause the cifs client to attempt to
 	  negotiate a newer dialect with servers, such as Samba 3.0.5
-- 
2.19.1

[PATCH AUTOSEL 4.19 64/73] vhost/vsock: fix reset orphans race with close timeout

[Sasha Levin]

From: Stefan Hajnoczi <stefanha@redhat.com>

[ Upstream commit c38f57da428b033f2721b611d84b1f40bde674a8 ]

If a local process has closed a connected socket and hasn't received a
RST packet yet, then the socket remains in the table until a timeout
expires.

When a vhost_vsock instance is released with the timeout still pending,
the socket is never freed because vhost_vsock has already set the
SOCK_DONE flag.

Check if the close timer is pending and let it close the socket.  This
prevents the race which can leak sockets.

Reported-by: Maximilian Riemensberger <riemensberger@cadami.net>
Cc: Graham Whaley <graham.whaley@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vsock.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index 34bc3ab40c6d..731e2ea2aeca 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -563,13 +563,21 @@ static void vhost_vsock_reset_orphans(struct sock *sk)
 	 * executing.
 	 */
 
-	if (!vhost_vsock_get(vsk->remote_addr.svm_cid)) {
-		sock_set_flag(sk, SOCK_DONE);
-		vsk->peer_shutdown = SHUTDOWN_MASK;
-		sk->sk_state = SS_UNCONNECTED;
-		sk->sk_err = ECONNRESET;
-		sk->sk_error_report(sk);
-	}
+	/* If the peer is still valid, no need to reset connection */
+	if (vhost_vsock_get(vsk->remote_addr.svm_cid))
+		return;
+
+	/* If the close timeout is pending, let it expire.  This avoids races
+	 * with the timeout callback.
+	 */
+	if (vsk->close_work_scheduled)
+		return;
+
+	sock_set_flag(sk, SOCK_DONE);
+	vsk->peer_shutdown = SHUTDOWN_MASK;
+	sk->sk_state = SS_UNCONNECTED;
+	sk->sk_err = ECONNRESET;
+	sk->sk_error_report(sk);
 }
 
 static int vhost_vsock_dev_release(struct inode *inode, struct file *file)
-- 
2.19.1

[PATCH AUTOSEL 4.19 65/73] mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 993107fea5eefdfdfde1ca38d3f01f0bebf76e77 ]

When deleting a VLAN device using an ioctl the netdev is unregistered
before the VLAN filter is updated via ndo_vlan_rx_kill_vid(). It can
lead to a use-after-free in mlxsw in case the VLAN device is deleted
while being enslaved to a bridge.

The reason for the above is that when mlxsw receives the CHANGEUPPER
event, it wrongly assumes that the VLAN device is no longer its upper
and thus destroys the internal representation of the bridge port despite
the reference count being non-zero.

Fix this by checking if the VLAN device is our upper using its real
device. In net-next I'm going to remove this trick and instead make
mlxsw completely agnostic to the order of the events.

Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlxsw/spectrum_switchdev.c   | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index 7715f1ed2bcb..4eb64cb0d9a1 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -286,7 +286,13 @@ static bool
 mlxsw_sp_bridge_port_should_destroy(const struct mlxsw_sp_bridge_port *
 				    bridge_port)
 {
-	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(bridge_port->dev);
+	struct net_device *dev = bridge_port->dev;
+	struct mlxsw_sp *mlxsw_sp;
+
+	if (is_vlan_dev(dev))
+		mlxsw_sp = mlxsw_sp_lower_get(vlan_dev_real_dev(dev));
+	else
+		mlxsw_sp = mlxsw_sp_lower_get(dev);
 
 	/* In case ports were pulled from out of a bridged LAG, then
 	 * it's possible the reference count isn't zero, yet the bridge
@@ -2020,7 +2026,7 @@ mlxsw_sp_bridge_8021d_port_leave(struct mlxsw_sp_bridge_device *bridge_device,
 
 	vid = is_vlan_dev(dev) ? vlan_dev_vlan_id(dev) : 1;
 	mlxsw_sp_port_vlan = mlxsw_sp_port_vlan_find_by_vid(mlxsw_sp_port, vid);
-	if (WARN_ON(!mlxsw_sp_port_vlan))
+	if (!mlxsw_sp_port_vlan)
 		return;
 
 	mlxsw_sp_port_vlan_bridge_leave(mlxsw_sp_port_vlan);
-- 
2.19.1

[PATCH AUTOSEL 4.19 66/73] i2c: axxia: properly handle master timeout

[Sasha Levin]

From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@nokia.com>

[ Upstream commit 6c7f25cae54b840302e4f1b371dbf318fbf09ab2 ]

According to Intel (R) Axxia TM Lionfish Communication Processor
Peripheral Subsystem Hardware Reference Manual, the AXXIA I2C module
have a programmable Master Wait Timer, which among others, checks the
time between commands send in manual mode. When a timeout (25ms) passes,
TSS bit is set in Master Interrupt Status register and a Stop command is
issued by the hardware.

The axxia_i2c_xfer(), does not properly handle this situation, however.
For each message a separate axxia_i2c_xfer_msg() is called and this
function incorrectly assumes that any interrupt might happen only when
waiting for completion. This is mostly correct but there is one
exception - a master timeout can trigger if enough time has passed
between individual transfers. It will, by definition, happen between
transfers when the interrupts are disabled by the code. If that happens,
the hardware issues Stop command.

The interrupt indicating timeout will not be triggered as soon as we
enable them since the Master Interrupt Status is cleared when master
mode is entered again (which happens before enabling irqs) meaning this
error is lost and the transfer is continued even though the Stop was
issued on the bus. The subsequent operations completes without error but
a bogus value (0xFF in case of read) is read as the client device is
confused because aborted transfer. No error is returned from
master_xfer() making caller believe that a valid value was read.

To fix the problem, the TSS bit (indicating timeout) in Master Interrupt
Status register is checked before each transfer. If it is set, there was
a timeout before this transfer and (as described above) the hardware
already issued Stop command so the transaction should be aborted thus
-ETIMEOUT is returned from the master_xfer() callback. In order to be
sure no timeout was issued we can't just read the status just before
starting new transaction as there will always be a small window of time
(few CPU cycles at best) where this might still happen. For this reason
we have to temporally disable the timer before checking for TSS bit.
Disabling it will, however, clear the TSS bit so in order to preserve
that information, we have to read it in ISR so we have to ensure that
the TSS interrupt is not masked between transfers of one transaction.
There is no need to call bus recovery or controller reinitialization if
that happens so it's skipped.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-axxia.c | 40 ++++++++++++++++++++++++----------
 1 file changed, 29 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index 8e60048a33f8..51d34959709b 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -74,8 +74,7 @@
 				 MST_STATUS_ND)
 #define   MST_STATUS_ERR	(MST_STATUS_NAK | \
 				 MST_STATUS_AL  | \
-				 MST_STATUS_IP  | \
-				 MST_STATUS_TSS)
+				 MST_STATUS_IP)
 #define MST_TX_BYTES_XFRD	0x50
 #define MST_RX_BYTES_XFRD	0x54
 #define SCL_HIGH_PERIOD		0x80
@@ -241,7 +240,7 @@ static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
 			 */
 			if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) {
 				idev->msg_err = -EPROTO;
-				i2c_int_disable(idev, ~0);
+				i2c_int_disable(idev, ~MST_STATUS_TSS);
 				complete(&idev->msg_complete);
 				break;
 			}
@@ -299,14 +298,19 @@ static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
 
 	if (status & MST_STATUS_SCC) {
 		/* Stop completed */
-		i2c_int_disable(idev, ~0);
+		i2c_int_disable(idev, ~MST_STATUS_TSS);
 		complete(&idev->msg_complete);
 	} else if (status & MST_STATUS_SNS) {
 		/* Transfer done */
-		i2c_int_disable(idev, ~0);
+		i2c_int_disable(idev, ~MST_STATUS_TSS);
 		if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len)
 			axxia_i2c_empty_rx_fifo(idev);
 		complete(&idev->msg_complete);
+	} else if (status & MST_STATUS_TSS) {
+		/* Transfer timeout */
+		idev->msg_err = -ETIMEDOUT;
+		i2c_int_disable(idev, ~MST_STATUS_TSS);
+		complete(&idev->msg_complete);
 	} else if (unlikely(status & MST_STATUS_ERR)) {
 		/* Transfer error */
 		i2c_int_disable(idev, ~0);
@@ -339,10 +343,10 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 	u32 rx_xfer, tx_xfer;
 	u32 addr_1, addr_2;
 	unsigned long time_left;
+	unsigned int wt_value;
 
 	idev->msg = msg;
 	idev->msg_xfrd = 0;
-	idev->msg_err = 0;
 	reinit_completion(&idev->msg_complete);
 
 	if (i2c_m_ten(msg)) {
@@ -383,9 +387,18 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 	else if (axxia_i2c_fill_tx_fifo(idev) != 0)
 		int_mask |= MST_STATUS_TFL;
 
+	wt_value = WT_VALUE(readl(idev->base + WAIT_TIMER_CONTROL));
+	/* Disable wait timer temporarly */
+	writel(wt_value, idev->base + WAIT_TIMER_CONTROL);
+	/* Check if timeout error happened */
+	if (idev->msg_err)
+		goto out;
+
 	/* Start manual mode */
 	writel(CMD_MANUAL, idev->base + MST_COMMAND);
 
+	writel(WT_EN | wt_value, idev->base + WAIT_TIMER_CONTROL);
+
 	i2c_int_enable(idev, int_mask);
 
 	time_left = wait_for_completion_timeout(&idev->msg_complete,
@@ -396,13 +409,15 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 	if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
 		dev_warn(idev->dev, "busy after xfer\n");
 
-	if (time_left == 0)
+	if (time_left == 0) {
 		idev->msg_err = -ETIMEDOUT;
-
-	if (idev->msg_err == -ETIMEDOUT)
 		i2c_recover_bus(&idev->adapter);
+		axxia_i2c_init(idev);
+	}
 
-	if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO)
+out:
+	if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO &&
+			idev->msg_err != -ETIMEDOUT)
 		axxia_i2c_init(idev);
 
 	return idev->msg_err;
@@ -410,7 +425,7 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 
 static int axxia_i2c_stop(struct axxia_i2c_dev *idev)
 {
-	u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC;
+	u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC | MST_STATUS_TSS;
 	unsigned long time_left;
 
 	reinit_completion(&idev->msg_complete);
@@ -437,6 +452,9 @@ axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	int i;
 	int ret = 0;
 
+	idev->msg_err = 0;
+	i2c_int_enable(idev, MST_STATUS_TSS);
+
 	for (i = 0; ret == 0 && i < num; ++i)
 		ret = axxia_i2c_xfer_msg(idev, &msgs[i]);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 67/73] i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 0544ee4b1ad574aec3b6379af5f5cdee42840971 ]

Some AMD based HP laptops have a SMB0001 ACPI device node which does not
define any methods.

This leads to the following error in dmesg:

[    5.222731] cmi: probe of SMB0001:00 failed with error -5

This commit makes acpi_smbus_cmi_add() return -ENODEV instead in this case
silencing the error. In case of a failure of the i2c_add_adapter() call
this commit now propagates the error from that call instead of -EIO.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-scmi.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index 7e9a2bbf5ddc..ff3f4553648f 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -367,6 +367,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 {
 	struct acpi_smbus_cmi *smbus_cmi;
 	const struct acpi_device_id *id;
+	int ret;
 
 	smbus_cmi = kzalloc(sizeof(struct acpi_smbus_cmi), GFP_KERNEL);
 	if (!smbus_cmi)
@@ -388,8 +389,10 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 	acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1,
 			    acpi_smbus_cmi_query_methods, NULL, smbus_cmi, NULL);
 
-	if (smbus_cmi->cap_info == 0)
+	if (smbus_cmi->cap_info == 0) {
+		ret = -ENODEV;
 		goto err;
+	}
 
 	snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
 		"SMBus CMI adapter %s",
@@ -400,7 +403,8 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 	smbus_cmi->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus_cmi->adapter.dev.parent = &device->dev;
 
-	if (i2c_add_adapter(&smbus_cmi->adapter)) {
+	ret = i2c_add_adapter(&smbus_cmi->adapter);
+	if (ret) {
 		dev_err(&device->dev, "Couldn't register adapter!\n");
 		goto err;
 	}
@@ -410,7 +414,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 err:
 	kfree(smbus_cmi);
 	device->driver_data = NULL;
-	return -EIO;
+	return ret;
 }
 
 static int acpi_smbus_cmi_remove(struct acpi_device *device)
-- 
2.19.1

[PATCH AUTOSEL 4.19 68/73] i2c: uniphier: fix violation of tLOW requirement for Fast-mode

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit 8469636ab5d8c77645b953746c10fda6983a8830 ]

Currently, the clock duty is set as tLOW/tHIGH = 1/1. For Fast-mode,
tLOW is set to 1.25 us while the I2C spec requires tLOW >= 1.3 us.

tLOW/tHIGH = 5/4 would meet both Standard-mode and Fast-mode:
  Standard-mode: tLOW = 5.56 us, tHIGH = 4.44 us
  Fast-mode:     tLOW = 1.39 us, tHIGH = 1.11 us

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-uniphier.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 454f914ae66d..c488e558aef7 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -320,7 +320,13 @@ static void uniphier_i2c_hw_init(struct uniphier_i2c_priv *priv)
 
 	uniphier_i2c_reset(priv, true);
 
-	writel((cyc / 2 << 16) | cyc, priv->membase + UNIPHIER_I2C_CLK);
+	/*
+	 * Bit30-16: clock cycles of tLOW.
+	 *  Standard-mode: tLOW = 4.7 us, tHIGH = 4.0 us
+	 *  Fast-mode:     tLOW = 1.3 us, tHIGH = 0.6 us
+	 * "tLow/tHIGH = 5/4" meets both.
+	 */
+	writel((cyc * 5 / 9 << 16) | cyc, priv->membase + UNIPHIER_I2C_CLK);
 
 	uniphier_i2c_reset(priv, false);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 69/73] i2c: uniphier-f: fix violation of tLOW requirement for Fast-mode

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit ece27a337d42a3197935711997f2880f0957ed7e ]

Currently, the clock duty is set as tLOW/tHIGH = 1/1. For Fast-mode,
tLOW is set to 1.25 us while the I2C spec requires tLOW >= 1.3 us.

tLOW/tHIGH = 5/4 would meet both Standard-mode and Fast-mode:
  Standard-mode: tLOW = 5.56 us, tHIGH = 4.44 us
  Fast-mode:     tLOW = 1.39 us, tHIGH = 1.11 us

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-uniphier-f.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index a403e8579b65..bc26ec822e26 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -470,9 +470,26 @@ static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv)
 
 	uniphier_fi2c_reset(priv);
 
+	/*
+	 *  Standard-mode: tLOW + tHIGH = 10 us
+	 *  Fast-mode:     tLOW + tHIGH = 2.5 us
+	 */
 	writel(cyc, priv->membase + UNIPHIER_FI2C_CYC);
-	writel(cyc / 2, priv->membase + UNIPHIER_FI2C_LCTL);
+	/*
+	 *  Standard-mode: tLOW = 4.7 us, tHIGH = 4.0 us, tBUF = 4.7 us
+	 *  Fast-mode:     tLOW = 1.3 us, tHIGH = 0.6 us, tBUF = 1.3 us
+	 * "tLow/tHIGH = 5/4" meets both.
+	 */
+	writel(cyc * 5 / 9, priv->membase + UNIPHIER_FI2C_LCTL);
+	/*
+	 *  Standard-mode: tHD;STA = 4.0 us, tSU;STA = 4.7 us, tSU;STO = 4.0 us
+	 *  Fast-mode:     tHD;STA = 0.6 us, tSU;STA = 0.6 us, tSU;STO = 0.6 us
+	 */
 	writel(cyc / 2, priv->membase + UNIPHIER_FI2C_SSUT);
+	/*
+	 *  Standard-mode: tSU;DAT = 250 ns
+	 *  Fast-mode:     tSU;DAT = 100 ns
+	 */
 	writel(cyc / 16, priv->membase + UNIPHIER_FI2C_DSUT);
 
 	uniphier_fi2c_prepare_operation(priv);
-- 
2.19.1

[PATCH AUTOSEL 4.19 70/73] nvme: validate controller state before rescheduling keep alive

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 86880d646122240596d6719b642fee3213239994 ]

Delete operations are seeing NULL pointer references in call_timer_fn.
Tracking these back, the timer appears to be the keep alive timer.

nvme_keep_alive_work() which is tied to the timer that is cancelled
by nvme_stop_keep_alive(), simply starts the keep alive io but doesn't
wait for it's completion. So nvme_stop_keep_alive() only stops a timer
when it's pending. When a keep alive is in flight, there is no timer
running and the nvme_stop_keep_alive() will have no affect on the keep
alive io. Thus, if the io completes successfully, the keep alive timer
will be rescheduled.   In the failure case, delete is called, the
controller state is changed, the nvme_stop_keep_alive() is called while
the io is outstanding, and the delete path continues on. The keep
alive happens to successfully complete before the delete paths mark it
as aborted as part of the queue termination, so the timer is restarted.
The delete paths then tear down the controller, and later on the timer
code fires and the timer entry is now corrupt.

Fix by validating the controller state before rescheduling the keep
alive. Testing with the fix has confirmed the condition above was hit.

Signed-off-by: James Smart <jsmart2021 at gmail.com>
Reviewed-by: Sagi Grimberg <sagi at grimberg.me>
Signed-off-by: Christoph Hellwig <hch at lst.de>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/host/core.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 0ba301f7e8b4..05bd7f49d6e0 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -831,6 +831,8 @@ static int nvme_submit_user_cmd(struct request_queue *q,
 static void nvme_keep_alive_end_io(struct request *rq, blk_status_t status)
 {
 	struct nvme_ctrl *ctrl = rq->end_io_data;
+	unsigned long flags;
+	bool startka = false;
 
 	blk_mq_free_request(rq);
 
@@ -841,7 +843,13 @@ static void nvme_keep_alive_end_io(struct request *rq, blk_status_t status)
 		return;
 	}
 
-	schedule_delayed_work(&ctrl->ka_work, ctrl->kato * HZ);
+	spin_lock_irqsave(&ctrl->lock, flags);
+	if (ctrl->state == NVME_CTRL_LIVE ||
+	    ctrl->state == NVME_CTRL_CONNECTING)
+		startka = true;
+	spin_unlock_irqrestore(&ctrl->lock, flags);
+	if (startka)
+		schedule_delayed_work(&ctrl->ka_work, ctrl->kato * HZ);
 }
 
 static int nvme_keep_alive(struct nvme_ctrl *ctrl)
-- 
2.19.1

[PATCH AUTOSEL 4.19 70/73] nvme: validate controller state before rescheduling keep alive

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 86880d646122240596d6719b642fee3213239994 ]

Delete operations are seeing NULL pointer references in call_timer_fn.
Tracking these back, the timer appears to be the keep alive timer.

nvme_keep_alive_work() which is tied to the timer that is cancelled
by nvme_stop_keep_alive(), simply starts the keep alive io but doesn't
wait for it's completion. So nvme_stop_keep_alive() only stops a timer
when it's pending. When a keep alive is in flight, there is no timer
running and the nvme_stop_keep_alive() will have no affect on the keep
alive io. Thus, if the io completes successfully, the keep alive timer
will be rescheduled.   In the failure case, delete is called, the
controller state is changed, the nvme_stop_keep_alive() is called while
the io is outstanding, and the delete path continues on. The keep
alive happens to successfully complete before the delete paths mark it
as aborted as part of the queue termination, so the timer is restarted.
The delete paths then tear down the controller, and later on the timer
code fires and the timer entry is now corrupt.

Fix by validating the controller state before rescheduling the keep
alive. Testing with the fix has confirmed the condition above was hit.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 0ba301f7e8b4..05bd7f49d6e0 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -831,6 +831,8 @@ static int nvme_submit_user_cmd(struct request_queue *q,
 static void nvme_keep_alive_end_io(struct request *rq, blk_status_t status)
 {
 	struct nvme_ctrl *ctrl = rq->end_io_data;
+	unsigned long flags;
+	bool startka = false;
 
 	blk_mq_free_request(rq);
 
@@ -841,7 +843,13 @@ static void nvme_keep_alive_end_io(struct request *rq, blk_status_t status)
 		return;
 	}
 
-	schedule_delayed_work(&ctrl->ka_work, ctrl->kato * HZ);
+	spin_lock_irqsave(&ctrl->lock, flags);
+	if (ctrl->state == NVME_CTRL_LIVE ||
+	    ctrl->state == NVME_CTRL_CONNECTING)
+		startka = true;
+	spin_unlock_irqrestore(&ctrl->lock, flags);
+	if (startka)
+		schedule_delayed_work(&ctrl->ka_work, ctrl->kato * HZ);
 }
 
 static int nvme_keep_alive(struct nvme_ctrl *ctrl)
-- 
2.19.1

[PATCH AUTOSEL 4.19 71/73] nvmet-rdma: fix response use after free

[Sasha Levin]

From: Israel Rukshin <israelr@mellanox.com>

[ Upstream commit d7dcdf9d4e15189ecfda24cc87339a3425448d5c ]

nvmet_rdma_release_rsp() may free the response before using it at error
flow.

Fixes: 8407879 ("nvmet-rdma: fix possible bogus dereference under heavy load")
Signed-off-by: Israel Rukshin <israelr at mellanox.com>
Reviewed-by: Sagi Grimberg <sagi at grimberg.me>
Reviewed-by: Max Gurtovoy <maxg at mellanox.com>
Signed-off-by: Christoph Hellwig <hch at lst.de>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/target/rdma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index bfc4da660bb4..e57f3902beb3 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -529,6 +529,7 @@ static void nvmet_rdma_send_done(struct ib_cq *cq, struct ib_wc *wc)
 {
 	struct nvmet_rdma_rsp *rsp =
 		container_of(wc->wr_cqe, struct nvmet_rdma_rsp, send_cqe);
+	struct nvmet_rdma_queue *queue = cq->cq_context;
 
 	nvmet_rdma_release_rsp(rsp);
 
@@ -536,7 +537,7 @@ static void nvmet_rdma_send_done(struct ib_cq *cq, struct ib_wc *wc)
 		     wc->status != IB_WC_WR_FLUSH_ERR)) {
 		pr_err("SEND for CQE 0x%p failed with status %s (%d).\n",
 			wc->wr_cqe, ib_wc_status_msg(wc->status), wc->status);
-		nvmet_rdma_error_comp(rsp->queue);
+		nvmet_rdma_error_comp(queue);
 	}
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 71/73] nvmet-rdma: fix response use after free

[Sasha Levin]

From: Israel Rukshin <israelr@mellanox.com>

[ Upstream commit d7dcdf9d4e15189ecfda24cc87339a3425448d5c ]

nvmet_rdma_release_rsp() may free the response before using it at error
flow.

Fixes: 8407879 ("nvmet-rdma: fix possible bogus dereference under heavy load")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/rdma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index bfc4da660bb4..e57f3902beb3 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -529,6 +529,7 @@ static void nvmet_rdma_send_done(struct ib_cq *cq, struct ib_wc *wc)
 {
 	struct nvmet_rdma_rsp *rsp =
 		container_of(wc->wr_cqe, struct nvmet_rdma_rsp, send_cqe);
+	struct nvmet_rdma_queue *queue = cq->cq_context;
 
 	nvmet_rdma_release_rsp(rsp);
 
@@ -536,7 +537,7 @@ static void nvmet_rdma_send_done(struct ib_cq *cq, struct ib_wc *wc)
 		     wc->status != IB_WC_WR_FLUSH_ERR)) {
 		pr_err("SEND for CQE 0x%p failed with status %s (%d).\n",
 			wc->wr_cqe, ib_wc_status_msg(wc->status), wc->status);
-		nvmet_rdma_error_comp(rsp->queue);
+		nvmet_rdma_error_comp(queue);
 	}
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 72/73] Revert "net/ibm/emac: wrong bit is used for STA control"

[Sasha Levin]

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

[ Upstream commit 5b3279e2cba2238b37f6c18adfdea8bddb32715a ]

This reverts commit 624ca9c33c8a853a4a589836e310d776620f4ab9.

This commit is completely bogus. The STACR register has two formats, old
and new, depending on the version of the IP block used. There's a pair of
device-tree properties that can be used to specify the format used:

	has-inverted-stacr-oc
	has-new-stacr-staopc

What this commit did was to change the bit definition used with the old
parts to match the new parts. This of course breaks the driver on all
the old ones.

Instead, the author should have set the appropriate properties in the
device-tree for the variant used on his board.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/emac/emac.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ibm/emac/emac.h b/drivers/net/ethernet/ibm/emac/emac.h
index e2f80cca9bed..0d2de6f67676 100644
--- a/drivers/net/ethernet/ibm/emac/emac.h
+++ b/drivers/net/ethernet/ibm/emac/emac.h
@@ -231,7 +231,7 @@ struct emac_regs {
 #define EMAC_STACR_PHYE			0x00004000
 #define EMAC_STACR_STAC_MASK		0x00003000
 #define EMAC_STACR_STAC_READ		0x00001000
-#define EMAC_STACR_STAC_WRITE		0x00000800
+#define EMAC_STACR_STAC_WRITE		0x00002000
 #define EMAC_STACR_OPBC_MASK		0x00000C00
 #define EMAC_STACR_OPBC_50		0x00000000
 #define EMAC_STACR_OPBC_66		0x00000400
-- 
2.19.1

[PATCH AUTOSEL 4.19 73/73] net/mlx4_core: Correctly set PFC param if global pause is turned off.

[Sasha Levin]

From: Tarick Bedeir <tarick@google.com>

[ Upstream commit bd5122cd1e0644d8bd8dd84517c932773e999766 ]

rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1.

Fixes: 6e8814ceb7e8 ("net/mlx4_en: Fix mixed PFC and Global pause user control requests")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index f11b45001cad..d290f0787dfb 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -1084,8 +1084,8 @@ static int mlx4_en_set_pauseparam(struct net_device *dev,
 
 	tx_pause = !!(pause->tx_pause);
 	rx_pause = !!(pause->rx_pause);
-	rx_ppp = priv->prof->rx_ppp && !(tx_pause || rx_pause);
-	tx_ppp = priv->prof->tx_ppp && !(tx_pause || rx_pause);
+	rx_ppp = (tx_pause || rx_pause) ? 0 : priv->prof->rx_ppp;
+	tx_ppp = (tx_pause || rx_pause) ? 0 : priv->prof->tx_ppp;
 
 	err = mlx4_SET_PORT_general(mdev->dev, priv->port,
 				    priv->rx_skb_size + ETH_FCS_LEN,
-- 
2.19.1