* [PATCH v2 1/6] dt-bindings: phy-qcom: Add support for msm8998 usb
@ 2019-01-14 16:36 ` Jeffrey Hugo
0 siblings, 0 replies; 7+ messages in thread
From: Jeffrey Hugo @ 2019-01-14 16:36 UTC (permalink / raw)
To: robh+dt, mark.rutland
Cc: bjorn.andersson, andy.gross, david.brown, linux-arm-msm,
linux-clk, linux-kernel, kishon, devicetree, gregkh, balbi,
linux-usb, Jeffrey Hugo
USB on msm8998 utilizes the QUSB2 and QMP phys, similar to sdm845.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
---
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 5 +++++
Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 1 +
2 files changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index 41a1074..6061b6f 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -9,6 +9,7 @@ Required properties:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
+ "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
"qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
"qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
"qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
@@ -42,6 +43,8 @@ Required properties:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref".
+ For "qcom,msm8998-qmp-usb3-phy" must contain:
+ "aux", "cfg_ahb", "ref".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
@@ -60,6 +63,8 @@ Required properties:
For "qcom,msm8996-qmp-pcie-phy" must contain:
"phy", "common", "cfg".
For "qcom,msm8996-qmp-usb3-phy" must contain
+ "phy", "common".
+ For "qcom,msm8998-qmp-usb3-phy" must contain
"phy", "common".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"phy", "common".
diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
index 03025d9..fe29f9e 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
@@ -6,6 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
Required properties:
- compatible: compatible list, contains
"qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
+ "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998,
"qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845.
- reg: offset and length of the PHY register set.
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [v2,1/6] dt-bindings: phy-qcom: Add support for msm8998 usb
@ 2019-01-14 16:36 ` Jeffrey Hugo
0 siblings, 0 replies; 7+ messages in thread
From: Jeffrey Hugo @ 2019-01-14 16:36 UTC (permalink / raw)
To: robh+dt, mark.rutland
Cc: bjorn.andersson, andy.gross, david.brown, linux-arm-msm,
linux-clk, linux-kernel, kishon, devicetree, gregkh, balbi,
linux-usb, Jeffrey Hugo
USB on msm8998 utilizes the QUSB2 and QMP phys, similar to sdm845.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
---
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 5 +++++
Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 1 +
2 files changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index 41a1074..6061b6f 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -9,6 +9,7 @@ Required properties:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
+ "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
"qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
"qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
"qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
@@ -42,6 +43,8 @@ Required properties:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref".
+ For "qcom,msm8998-qmp-usb3-phy" must contain:
+ "aux", "cfg_ahb", "ref".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
@@ -60,6 +63,8 @@ Required properties:
For "qcom,msm8996-qmp-pcie-phy" must contain:
"phy", "common", "cfg".
For "qcom,msm8996-qmp-usb3-phy" must contain
+ "phy", "common".
+ For "qcom,msm8998-qmp-usb3-phy" must contain
"phy", "common".
For "qcom,sdm845-qmp-usb3-phy" must contain:
"phy", "common".
diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
index 03025d9..fe29f9e 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
@@ -6,6 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
Required properties:
- compatible: compatible list, contains
"qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
+ "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998,
"qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845.
- reg: offset and length of the PHY register set.
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/6] dt-bindings: phy-qcom: Add support for msm8998 usb
@ 2019-01-15 18:08 ` Bjorn Andersson
0 siblings, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2019-01-15 18:08 UTC (permalink / raw)
To: Jeffrey Hugo
Cc: robh+dt, mark.rutland, andy.gross, david.brown, linux-arm-msm,
linux-clk, linux-kernel, kishon, devicetree, gregkh, balbi,
linux-usb
On Mon 14 Jan 08:36 PST 2019, Jeffrey Hugo wrote:
> USB on msm8998 utilizes the QUSB2 and QMP phys, similar to sdm845.
>
> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> ---
> Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 5 +++++
> Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 1 +
> 2 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index 41a1074..6061b6f 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -9,6 +9,7 @@ Required properties:
> "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
> "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
> "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
> + "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
> "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
> "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
> "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
> @@ -42,6 +43,8 @@ Required properties:
> "aux", "cfg_ahb", "ref".
> For "qcom,msm8996-qmp-usb3-phy" must contain:
> "aux", "cfg_ahb", "ref".
> + For "qcom,msm8998-qmp-usb3-phy" must contain:
> + "aux", "cfg_ahb", "ref".
> For "qcom,sdm845-qmp-usb3-phy" must contain:
> "aux", "cfg_ahb", "ref", "com_aux".
> For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
> @@ -60,6 +63,8 @@ Required properties:
> For "qcom,msm8996-qmp-pcie-phy" must contain:
> "phy", "common", "cfg".
> For "qcom,msm8996-qmp-usb3-phy" must contain
> + "phy", "common".
Odd indentation.
Apart from this, you have my
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> + For "qcom,msm8998-qmp-usb3-phy" must contain
> "phy", "common".
> For "qcom,sdm845-qmp-usb3-phy" must contain:
> "phy", "common".
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
> index 03025d9..fe29f9e 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
> @@ -6,6 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
> Required properties:
> - compatible: compatible list, contains
> "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
> + "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998,
> "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845.
>
> - reg: offset and length of the PHY register set.
> --
> Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
> Qualcomm Technologies, Inc. is a member of the
> Code Aurora Forum, a Linux Foundation Collaborative Project.
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [v2,1/6] dt-bindings: phy-qcom: Add support for msm8998 usb
@ 2019-01-15 18:08 ` Bjorn Andersson
0 siblings, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2019-01-15 18:08 UTC (permalink / raw)
To: Jeffrey Hugo
Cc: robh+dt, mark.rutland, andy.gross, david.brown, linux-arm-msm,
linux-clk, linux-kernel, kishon, devicetree, gregkh, balbi,
linux-usb
On Mon 14 Jan 08:36 PST 2019, Jeffrey Hugo wrote:
> USB on msm8998 utilizes the QUSB2 and QMP phys, similar to sdm845.
>
> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> ---
> Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 5 +++++
> Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 1 +
> 2 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index 41a1074..6061b6f 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -9,6 +9,7 @@ Required properties:
> "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
> "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
> "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
> + "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
> "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
> "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
> "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
> @@ -42,6 +43,8 @@ Required properties:
> "aux", "cfg_ahb", "ref".
> For "qcom,msm8996-qmp-usb3-phy" must contain:
> "aux", "cfg_ahb", "ref".
> + For "qcom,msm8998-qmp-usb3-phy" must contain:
> + "aux", "cfg_ahb", "ref".
> For "qcom,sdm845-qmp-usb3-phy" must contain:
> "aux", "cfg_ahb", "ref", "com_aux".
> For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
> @@ -60,6 +63,8 @@ Required properties:
> For "qcom,msm8996-qmp-pcie-phy" must contain:
> "phy", "common", "cfg".
> For "qcom,msm8996-qmp-usb3-phy" must contain
> + "phy", "common".
Odd indentation.
Apart from this, you have my
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> + For "qcom,msm8998-qmp-usb3-phy" must contain
> "phy", "common".
> For "qcom,sdm845-qmp-usb3-phy" must contain:
> "phy", "common".
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
> index 03025d9..fe29f9e 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
> @@ -6,6 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
> Required properties:
> - compatible: compatible list, contains
> "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
> + "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998,
> "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845.
>
> - reg: offset and length of the PHY register set.
> --
> Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
> Qualcomm Technologies, Inc. is a member of the
> Code Aurora Forum, a Linux Foundation Collaborative Project.
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/6] dt-bindings: phy-qcom: Add support for msm8998 usb
2019-01-15 18:08 ` [v2,1/6] " Bjorn Andersson
(?)
@ 2019-01-16 8:57 ` Kishon Vijay Abraham I
-1 siblings, 0 replies; 7+ messages in thread
From: Kishon Vijay Abraham I @ 2019-01-16 8:57 UTC (permalink / raw)
To: Bjorn Andersson, Jeffrey Hugo
Cc: robh+dt, mark.rutland, andy.gross, david.brown, linux-arm-msm,
linux-clk, linux-kernel, devicetree, gregkh, balbi, linux-usb
On 15/01/19 11:38 PM, Bjorn Andersson wrote:
> On Mon 14 Jan 08:36 PST 2019, Jeffrey Hugo wrote:
>
>> USB on msm8998 utilizes the QUSB2 and QMP phys, similar to sdm845.
>>
>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>> ---
>> Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 5 +++++
>> Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 1 +
>> 2 files changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> index 41a1074..6061b6f 100644
>> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> @@ -9,6 +9,7 @@ Required properties:
>> "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
>> "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
>> "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
>> + "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
>> "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
>> "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
>> "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
>> @@ -42,6 +43,8 @@ Required properties:
>> "aux", "cfg_ahb", "ref".
>> For "qcom,msm8996-qmp-usb3-phy" must contain:
>> "aux", "cfg_ahb", "ref".
>> + For "qcom,msm8998-qmp-usb3-phy" must contain:
>> + "aux", "cfg_ahb", "ref".
>> For "qcom,sdm845-qmp-usb3-phy" must contain:
>> "aux", "cfg_ahb", "ref", "com_aux".
>> For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
>> @@ -60,6 +63,8 @@ Required properties:
>> For "qcom,msm8996-qmp-pcie-phy" must contain:
>> "phy", "common", "cfg".
>> For "qcom,msm8996-qmp-usb3-phy" must contain
>> + "phy", "common".
>
> Odd indentation.
>
>
> Apart from this, you have my
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixed the indentation and merged it.
Thanks
Kishon
^ permalink raw reply [flat|nested] 7+ messages in thread
* [v2,1/6] dt-bindings: phy-qcom: Add support for msm8998 usb
@ 2019-01-16 8:57 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 7+ messages in thread
From: Kishon Vijay Abraham I @ 2019-01-16 8:57 UTC (permalink / raw)
To: Bjorn Andersson, Jeffrey Hugo
Cc: robh+dt, mark.rutland, andy.gross, david.brown, linux-arm-msm,
linux-clk, linux-kernel, devicetree, gregkh, balbi, linux-usb
On 15/01/19 11:38 PM, Bjorn Andersson wrote:
> On Mon 14 Jan 08:36 PST 2019, Jeffrey Hugo wrote:
>
>> USB on msm8998 utilizes the QUSB2 and QMP phys, similar to sdm845.
>>
>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>> ---
>> Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 5 +++++
>> Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 1 +
>> 2 files changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> index 41a1074..6061b6f 100644
>> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> @@ -9,6 +9,7 @@ Required properties:
>> "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
>> "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
>> "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
>> + "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
>> "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
>> "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
>> "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
>> @@ -42,6 +43,8 @@ Required properties:
>> "aux", "cfg_ahb", "ref".
>> For "qcom,msm8996-qmp-usb3-phy" must contain:
>> "aux", "cfg_ahb", "ref".
>> + For "qcom,msm8998-qmp-usb3-phy" must contain:
>> + "aux", "cfg_ahb", "ref".
>> For "qcom,sdm845-qmp-usb3-phy" must contain:
>> "aux", "cfg_ahb", "ref", "com_aux".
>> For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
>> @@ -60,6 +63,8 @@ Required properties:
>> For "qcom,msm8996-qmp-pcie-phy" must contain:
>> "phy", "common", "cfg".
>> For "qcom,msm8996-qmp-usb3-phy" must contain
>> + "phy", "common".
>
> Odd indentation.
>
>
> Apart from this, you have my
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixed the indentation and merged it.
Thanks
Kishon
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/6] dt-bindings: phy-qcom: Add support for msm8998 usb
@ 2019-01-16 8:57 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 7+ messages in thread
From: Kishon Vijay Abraham I @ 2019-01-16 8:57 UTC (permalink / raw)
To: Bjorn Andersson, Jeffrey Hugo
Cc: robh+dt, mark.rutland, andy.gross, david.brown, linux-arm-msm,
linux-clk, linux-kernel, devicetree, gregkh, balbi, linux-usb
On 15/01/19 11:38 PM, Bjorn Andersson wrote:
> On Mon 14 Jan 08:36 PST 2019, Jeffrey Hugo wrote:
>
>> USB on msm8998 utilizes the QUSB2 and QMP phys, similar to sdm845.
>>
>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>> ---
>> Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 5 +++++
>> Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 1 +
>> 2 files changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> index 41a1074..6061b6f 100644
>> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>> @@ -9,6 +9,7 @@ Required properties:
>> "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
>> "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
>> "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
>> + "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
>> "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
>> "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
>> "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
>> @@ -42,6 +43,8 @@ Required properties:
>> "aux", "cfg_ahb", "ref".
>> For "qcom,msm8996-qmp-usb3-phy" must contain:
>> "aux", "cfg_ahb", "ref".
>> + For "qcom,msm8998-qmp-usb3-phy" must contain:
>> + "aux", "cfg_ahb", "ref".
>> For "qcom,sdm845-qmp-usb3-phy" must contain:
>> "aux", "cfg_ahb", "ref", "com_aux".
>> For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
>> @@ -60,6 +63,8 @@ Required properties:
>> For "qcom,msm8996-qmp-pcie-phy" must contain:
>> "phy", "common", "cfg".
>> For "qcom,msm8996-qmp-usb3-phy" must contain
>> + "phy", "common".
>
> Odd indentation.
>
>
> Apart from this, you have my
>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixed the indentation and merged it.
Thanks
Kishon
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-01-16 8:58 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-01-14 16:36 [PATCH v2 1/6] dt-bindings: phy-qcom: Add support for msm8998 usb Jeffrey Hugo
2019-01-14 16:36 ` [v2,1/6] " Jeffrey Hugo
2019-01-15 18:08 ` [PATCH v2 1/6] " Bjorn Andersson
2019-01-15 18:08 ` [v2,1/6] " Bjorn Andersson
2019-01-16 8:57 ` [PATCH v2 1/6] " Kishon Vijay Abraham I
2019-01-16 8:57 ` [v2,1/6] " Kishon Vijay Abraham I
2019-01-16 8:57 ` [PATCH v2 1/6] " Kishon Vijay Abraham I
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.