Re: [RFC PATCH 03/27] mtd: nand: Introduce the ECC engine abstraction

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Boris,

Boris Brezillon <bbrezillon@kernel.org> wrote on Mon, 25 Feb 2019
19:55:43 +0100:

> On Thu, 21 Feb 2019 11:01:52 +0100
> Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> 
> > +
> > +/**
> > + * struct nand_ecc_engine_ops - Generic ECC engine operations
> > + *
> > + * @init_ctx: given a desired user configuration for the pointed NAND device,
> > + *            requests the ECC engine driver to setup a configuration with
> > + *            values it supports.
> > + * @cleanup_ctx: clean the context initialized by @init_ctx.
> > + * @prepare_io_req: is called before reading/writing a page to prepare the I/O
> > + *                  request to be performed with ECC correction.
> > + * @finish_io_req: is called after reading/writing a page to terminate the I/O
> > + *                 request and ensure proper ECC correction.
> > + */
> > +struct nand_ecc_engine_ops {  
> 
> We might want to add a
> 
> 	void (*put_engine)(struct nand_ecc_engine *engine);
> 
> here if we want the nanddev cleanup path to be generic.
> This hook would be implemented by drivers where the ECC engine object is
> refcounted (typically the case for HW ECC engines shared by the raw NAND
> controller and the SPI controller).
> 
> Alternatively, you can just add one nand_put_xxx_ecc_engine() func per
> engine class (SW, ondie and HW).

Can't this be handled in the init/cleanup_ctx() path directly?

Furthermore if this is just a hook to do reference counting.


Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/