All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jernej Skrabec <jernej.skrabec@siol.net>
To: maxime.ripard@bootlin.com, wens@csie.org
Cc: airlied@linux.ie, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-sunxi@googlegroups.com,
	daniel@ffwll.ch, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] drm/sun4i: Fix sun8i HDMI PHY initialization
Date: Tue, 14 May 2019 22:43:35 +0200	[thread overview]
Message-ID: <20190514204337.11068-1-jernej.skrabec@siol.net> (raw)

I received a report that 4K resolution doesn't work if U-Boot video
driver is disabled. It turns out that HDMI PHY clock driver was
initialized prematurely, before reset line was deasserted and clocks
enabled. U-Boot video driver masked the issue because it set pixel
clock correctly.

In the process of researching the bug, I also found out that few bits
in HDMI PHY registers were not set correctly. While there is no
noticeable change (4K resolution works with both settings), I've
added fix anyway, to be conformant with vendor documentation.

Please check it out.

Best regards,
Jernej

Jernej Skrabec (2):
  drm/sun4i: Fix sun8i HDMI PHY clock initialization
  drm/sun4i: Fix sun8i HDMI PHY configuration for > 148.5 MHz

 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 29 ++++++++++++++------------
 1 file changed, 16 insertions(+), 13 deletions(-)

-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Jernej Skrabec <jernej.skrabec@siol.net>
To: maxime.ripard@bootlin.com, wens@csie.org
Cc: airlied@linux.ie, daniel@ffwll.ch,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH 0/2] drm/sun4i: Fix sun8i HDMI PHY initialization
Date: Tue, 14 May 2019 22:43:35 +0200	[thread overview]
Message-ID: <20190514204337.11068-1-jernej.skrabec@siol.net> (raw)

I received a report that 4K resolution doesn't work if U-Boot video
driver is disabled. It turns out that HDMI PHY clock driver was
initialized prematurely, before reset line was deasserted and clocks
enabled. U-Boot video driver masked the issue because it set pixel
clock correctly.

In the process of researching the bug, I also found out that few bits
in HDMI PHY registers were not set correctly. While there is no
noticeable change (4K resolution works with both settings), I've
added fix anyway, to be conformant with vendor documentation.

Please check it out.

Best regards,
Jernej

Jernej Skrabec (2):
  drm/sun4i: Fix sun8i HDMI PHY clock initialization
  drm/sun4i: Fix sun8i HDMI PHY configuration for > 148.5 MHz

 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 29 ++++++++++++++------------
 1 file changed, 16 insertions(+), 13 deletions(-)

-- 
2.21.0

             reply	other threads:[~2019-05-14 20:44 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14 20:43 Jernej Skrabec [this message]
2019-05-14 20:43 ` [PATCH 0/2] drm/sun4i: Fix sun8i HDMI PHY initialization Jernej Skrabec
2019-05-14 20:43 ` [PATCH 1/2] drm/sun4i: Fix sun8i HDMI PHY clock initialization Jernej Skrabec
2019-05-14 20:43   ` Jernej Skrabec
2019-05-14 20:43   ` Jernej Skrabec
2019-05-14 20:43 ` [PATCH 2/2] drm/sun4i: Fix sun8i HDMI PHY configuration for > 148.5 MHz Jernej Skrabec
2019-05-14 20:43   ` Jernej Skrabec
2019-05-14 20:43   ` Jernej Skrabec
2019-05-16  8:31 ` [PATCH 0/2] drm/sun4i: Fix sun8i HDMI PHY initialization Maxime Ripard
2019-05-16  8:31   ` Maxime Ripard
2019-05-16  8:31   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190514204337.11068-1-jernej.skrabec@siol.net \
    --to=jernej.skrabec@siol.net \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.