[PATCH v3 0/6] Handle MCA banks in a per_cpu way

[PATCH v3 0/6] Handle MCA banks in a per_cpu way

[Ghannam, Yazen]

From: Yazen Ghannam <yazen.ghannam@amd.com>

The focus of this patchset is define and use the MCA bank structures
and bank count per logical CPU.

With the exception of patch 4, this set applies to systems in production
today.

Patch 1:
Moves the declaration of struct mce_banks[] to the only file it's used.

Patch 2:
Splits struct mce_bank into a structure for fields common to MCA banks
on all CPUs and another structure that can be used per_cpu.

Patch 3:
Brings full circle the saga of the threshold block addresses on SMCA
systems. After taking a step back and reviewing the AMD documentation, I
think that this implimentation is the simplest and more robust way to
follow the spec.

Patch 4:
Saves and uses the MCA bank count as a per_cpu variable. This is to
support systems that have MCA bank counts that are different between
logical CPUs.

Patch 5:
Makes sure that sysfs reports the MCA_CTL value as set in hardware. This
is not something related to making things per_cpu but rather just
something I noticed while working on the other patches.

Patch 6:
Prevents sysfs access for MCA banks that are uninitialized.

Link:
https://lkml.kernel.org/r/20190411201743.43195-1-Yazen.Ghannam@amd.com

Thanks,
Yazen

Yazen Ghannam (6):
  x86/MCE: Make struct mce_banks[] static
  x86/MCE: Handle MCA controls in a per_cpu way
  x86/MCE/AMD: Don't cache block addresses on SMCA systems
  x86/MCE: Make number of MCA banks per_cpu
  x86/MCE: Save MCA control bits that get set in hardware
  x86/MCE: Treat MCE bank as initialized if control bits set in hardware

 arch/x86/kernel/cpu/mce/amd.c      |  90 ++++++++++----------
 arch/x86/kernel/cpu/mce/core.c     | 131 +++++++++++++++++++++--------
 arch/x86/kernel/cpu/mce/internal.h |  12 +--
 3 files changed, 142 insertions(+), 91 deletions(-)

-- 
2.17.1

[v3,5/6] x86/MCE: Save MCA control bits that get set in hardware

[Yazen Ghannam]

From: Yazen Ghannam <yazen.ghannam@amd.com>

The OS is expected to write all bits in MCA_CTL. However, only
implemented bits get set in the hardware.

Read back MCA_CTL so that the value in the hardware is saved and
reported through sysfs.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-6-Yazen.Ghannam@amd.com

v2->v3:
* No change.

v1->v2:
* No change.

 arch/x86/kernel/cpu/mce/core.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

-- 
2.17.1

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 986de830f26e..551366c155ef 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1567,10 +1567,13 @@ static void __mcheck_cpu_init_clear_banks(void)
 	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
-		if (!b->init)
-			continue;
-		wrmsrl(msr_ops.ctl(i), b->ctl);
-		wrmsrl(msr_ops.status(i), 0);
+		if (b->init) {
+			wrmsrl(msr_ops.ctl(i), b->ctl);
+			wrmsrl(msr_ops.status(i), 0);
+		}
+
+		/* Save bits set in hardware. */
+		rdmsrl(msr_ops.ctl(i), b->ctl);
 	}
 }
 
@@ -2325,8 +2328,10 @@ static void mce_reenable_cpu(void)
 	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
-		if (b->init)
+		if (b->init) {
 			wrmsrl(msr_ops.ctl(i), b->ctl);
+			rdmsrl(msr_ops.ctl(i), b->ctl);
+		}
 	}
 }
 

[PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Ghannam, Yazen]

From: Yazen Ghannam <yazen.ghannam@amd.com>

The OS is expected to write all bits in MCA_CTL. However, only
implemented bits get set in the hardware.

Read back MCA_CTL so that the value in the hardware is saved and
reported through sysfs.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-6-Yazen.Ghannam@amd.com

v2->v3:
* No change.

v1->v2:
* No change.

 arch/x86/kernel/cpu/mce/core.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 986de830f26e..551366c155ef 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1567,10 +1567,13 @@ static void __mcheck_cpu_init_clear_banks(void)
 	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
-		if (!b->init)
-			continue;
-		wrmsrl(msr_ops.ctl(i), b->ctl);
-		wrmsrl(msr_ops.status(i), 0);
+		if (b->init) {
+			wrmsrl(msr_ops.ctl(i), b->ctl);
+			wrmsrl(msr_ops.status(i), 0);
+		}
+
+		/* Save bits set in hardware. */
+		rdmsrl(msr_ops.ctl(i), b->ctl);
 	}
 }
 
@@ -2325,8 +2328,10 @@ static void mce_reenable_cpu(void)
 	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
-		if (b->init)
+		if (b->init) {
 			wrmsrl(msr_ops.ctl(i), b->ctl);
+			rdmsrl(msr_ops.ctl(i), b->ctl);
+		}
 	}
 }
 
-- 
2.17.1

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Luck, Tony]

On Tue, Apr 30, 2019 at 08:32:20PM +0000, Ghannam, Yazen wrote:
> diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
> index 986de830f26e..551366c155ef 100644
> --- a/arch/x86/kernel/cpu/mce/core.c
> +++ b/arch/x86/kernel/cpu/mce/core.c
> @@ -1567,10 +1567,13 @@ static void __mcheck_cpu_init_clear_banks(void)
>  	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
>  		struct mce_bank *b = &mce_banks[i];
>  
> -		if (!b->init)
> -			continue;
> -		wrmsrl(msr_ops.ctl(i), b->ctl);
> -		wrmsrl(msr_ops.status(i), 0);
> +		if (b->init) {
> +			wrmsrl(msr_ops.ctl(i), b->ctl);
> +			wrmsrl(msr_ops.status(i), 0);
> +		}
> +
> +		/* Save bits set in hardware. */
> +		rdmsrl(msr_ops.ctl(i), b->ctl);
>  	}
>  }

This looks like it will be a problem for Intel CPUs. If
we take a CPU offline, and then bring it back again, we
ues "b->ctl" to reinitialize the register in mce_reenable_cpu().

But Intel SDM says at the end of section "15.3.2.1 IA32_MCi_CTL_MSRs"

	"P6 family processors only allow the writing of all 1s or all
	0s to the IA32_MCi_CTL MSR."

-Tony

RE: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Ghannam, Yazen]

> -----Original Message-----
> From: Luck, Tony <tony.luck@intel.com>
> Sent: Thursday, May 16, 2019 10:52 AM
> To: Ghannam, Yazen <Yazen.Ghannam@amd.com>
> Cc: linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; bp@suse.de; x86@kernel.org
> Subject: Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware
> 
> 
> On Tue, Apr 30, 2019 at 08:32:20PM +0000, Ghannam, Yazen wrote:
> > diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
> > index 986de830f26e..551366c155ef 100644
> > --- a/arch/x86/kernel/cpu/mce/core.c
> > +++ b/arch/x86/kernel/cpu/mce/core.c
> > @@ -1567,10 +1567,13 @@ static void __mcheck_cpu_init_clear_banks(void)
> >       for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
> >               struct mce_bank *b = &mce_banks[i];
> >
> > -             if (!b->init)
> > -                     continue;
> > -             wrmsrl(msr_ops.ctl(i), b->ctl);
> > -             wrmsrl(msr_ops.status(i), 0);
> > +             if (b->init) {
> > +                     wrmsrl(msr_ops.ctl(i), b->ctl);
> > +                     wrmsrl(msr_ops.status(i), 0);
> > +             }
> > +
> > +             /* Save bits set in hardware. */
> > +             rdmsrl(msr_ops.ctl(i), b->ctl);
> >       }
> >  }
> 
> This looks like it will be a problem for Intel CPUs. If
> we take a CPU offline, and then bring it back again, we
> ues "b->ctl" to reinitialize the register in mce_reenable_cpu().
> 
> But Intel SDM says at the end of section "15.3.2.1 IA32_MCi_CTL_MSRs"
> 
>         "P6 family processors only allow the writing of all 1s or all
>         0s to the IA32_MCi_CTL MSR."
> 

I can put a vendor check on the read. Is that sufficient?

Thanks,
Yazen

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Thu, May 16, 2019 at 04:14:14PM +0000, Ghannam, Yazen wrote:
> I can put a vendor check on the read. Is that sufficient?

Or we can drop this patch. Remind me again pls why do we need it?

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

RE: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Ghannam, Yazen]

> -----Original Message-----
> From: linux-edac-owner@vger.kernel.org <linux-edac-owner@vger.kernel.org> On Behalf Of Borislav Petkov
> Sent: Thursday, May 16, 2019 11:57 AM
> To: Ghannam, Yazen <Yazen.Ghannam@amd.com>
> Cc: Luck, Tony <tony.luck@intel.com>; linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; x86@kernel.org
> Subject: Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware
> 
> 
> On Thu, May 16, 2019 at 04:14:14PM +0000, Ghannam, Yazen wrote:
> > I can put a vendor check on the read. Is that sufficient?
> 
> Or we can drop this patch. Remind me again pls why do we need it?
> 

So that the sysfs files show the control values that are set in the hardware. It seemed like this would be more helpful than showing all 0xF's.

But I'm okay with dropping this patch. Patch 6 in this set depends on this, so it'll need to be dropped also.

Should I send out another version of this set?

Thanks,
Yazen

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Thu, May 16, 2019 at 05:09:11PM +0000, Ghannam, Yazen wrote:
> So that the sysfs files show the control values that are set in the
> hardware. It seemed like this would be more helpful than showing all
> 0xF's.

Yeah, but it has been like that since forever and it hasn't bugged
anybody. Probably because anybody doesn't even look at those files. As
Tony says:

"RAS is a lonely subsystem ... even EDAC gets more love."

:-)))

And adding yet another vendor check for this seemed just not worth it.

> Should I send out another version of this set?

I simply zapped 5/6. I still think your 6/6 makes sense though.

---
From: Yazen Ghannam <yazen.ghannam@amd.com>
Date: Tue, 30 Apr 2019 20:32:21 +0000
Subject: [PATCH] x86/MCE: Determine MCA banks' init state properly

The OS is expected to write all bits to MCA_CTL for each bank,
thus enabling error reporting in all banks. However, some banks
may be unused in which case the registers for such banks are
Read-as-Zero/Writes-Ignored. Also, the OS may avoid setting some control
bits because of quirks, etc.

A bank can be considered uninitialized if the MCA_CTL register returns
zero. This is because either the OS did not write anything or because
the hardware is enforcing RAZ/WI for the bank.

Set a bank's init value based on if the control bits are set or not in
hardware. Return an error code in the sysfs interface for uninitialized
banks.

 [ bp: Massage a bit. ]

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "x86@kernel.org" <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190430203206.104163-7-Yazen.Ghannam@amd.com
---
 arch/x86/kernel/cpu/mce/core.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 5bcecadcf4d9..c049689f3d73 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1567,10 +1567,13 @@ static void __mcheck_cpu_init_clear_banks(void)
 	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
-		if (!b->init)
-			continue;
-		wrmsrl(msr_ops.ctl(i), b->ctl);
-		wrmsrl(msr_ops.status(i), 0);
+		if (b->init) {
+			wrmsrl(msr_ops.ctl(i), b->ctl);
+			wrmsrl(msr_ops.status(i), 0);
+		}
+
+		/* Bank is initialized if bits are set in hardware. */
+		b->init = !!b->ctl;
 	}
 }
 
@@ -2095,6 +2098,9 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_array, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	return sprintf(buf, "%llx\n", b->ctl);
 }
 
@@ -2113,6 +2119,9 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_array, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	b->ctl = new;
 	mce_restart();
 
-- 
2.21.0

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

RE: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Ghannam, Yazen]

> -----Original Message-----
> From: linux-edac-owner@vger.kernel.org <linux-edac-owner@vger.kernel.org> On Behalf Of Borislav Petkov
> Sent: Thursday, May 16, 2019 12:21 PM
> To: Ghannam, Yazen <Yazen.Ghannam@amd.com>
> Cc: Luck, Tony <tony.luck@intel.com>; linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; x86@kernel.org
> Subject: Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware
> 
> 
> On Thu, May 16, 2019 at 05:09:11PM +0000, Ghannam, Yazen wrote:
> > So that the sysfs files show the control values that are set in the
> > hardware. It seemed like this would be more helpful than showing all
> > 0xF's.
> 
> Yeah, but it has been like that since forever and it hasn't bugged
> anybody. Probably because anybody doesn't even look at those files. As
> Tony says:
> 
> "RAS is a lonely subsystem ... even EDAC gets more love."
> 
> :-)))
> 
> And adding yet another vendor check for this seemed just not worth it.
> 
> > Should I send out another version of this set?
> 
> I simply zapped 5/6. I still think your 6/6 makes sense though.
> 
> ---
> From: Yazen Ghannam <yazen.ghannam@amd.com>
> Date: Tue, 30 Apr 2019 20:32:21 +0000
> Subject: [PATCH] x86/MCE: Determine MCA banks' init state properly
> 
> The OS is expected to write all bits to MCA_CTL for each bank,
> thus enabling error reporting in all banks. However, some banks
> may be unused in which case the registers for such banks are
> Read-as-Zero/Writes-Ignored. Also, the OS may avoid setting some control
> bits because of quirks, etc.
> 
> A bank can be considered uninitialized if the MCA_CTL register returns
> zero. This is because either the OS did not write anything or because
> the hardware is enforcing RAZ/WI for the bank.
> 
> Set a bank's init value based on if the control bits are set or not in
> hardware. Return an error code in the sysfs interface for uninitialized
> banks.
> 
>  [ bp: Massage a bit. ]
> 
> Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
> Signed-off-by: Borislav Petkov <bp@suse.de>
> Cc: "H. Peter Anvin" <hpa@zytor.com>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Tony Luck <tony.luck@intel.com>
> Cc: "x86@kernel.org" <x86@kernel.org>
> Link: https://lkml.kernel.org/r/20190430203206.104163-7-Yazen.Ghannam@amd.com
> ---
>  arch/x86/kernel/cpu/mce/core.c | 17 +++++++++++++----
>  1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
> index 5bcecadcf4d9..c049689f3d73 100644
> --- a/arch/x86/kernel/cpu/mce/core.c
> +++ b/arch/x86/kernel/cpu/mce/core.c
> @@ -1567,10 +1567,13 @@ static void __mcheck_cpu_init_clear_banks(void)
>         for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
>                 struct mce_bank *b = &mce_banks[i];
> 
> -               if (!b->init)
> -                       continue;
> -               wrmsrl(msr_ops.ctl(i), b->ctl);
> -               wrmsrl(msr_ops.status(i), 0);
> +               if (b->init) {
> +                       wrmsrl(msr_ops.ctl(i), b->ctl);
> +                       wrmsrl(msr_ops.status(i), 0);
> +               }
> +
> +               /* Bank is initialized if bits are set in hardware. */
> +               b->init = !!b->ctl;

We don't actually know if there are bits set in hardware until we read it back. So I don't think this is adding anything new.

Thanks,
Yazen

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Thu, May 16, 2019 at 08:20:58PM +0000, Ghannam, Yazen wrote:
> We don't actually know if there are bits set in hardware until we read
> it back. So I don't think this is adding anything new.

Bah, of course. We need to read it first (pasting the whole function).
Now, __mcheck_cpu_init_clear_banks() gets called when we change
configuration too, in mce_cpu_restart() and if we do it this way, we'll
be rereading MCi_CTL each time but I don't see anything wrong with that.

Hmmm?

static void __mcheck_cpu_init_clear_banks(void)
{
        struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
        int i;

        for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
                struct mce_bank *b = &mce_banks[i];

                rdmsrl(msr_ops.ctl(i), b->ctl);

                /* Bank is initialized if bits are set in hardware. */
                b->init = !!b->ctl;
                if (b->init) {
                        wrmsrl(msr_ops.ctl(i), b->ctl);
                        wrmsrl(msr_ops.status(i), 0);
                }

        }
}

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Luck, Tony]

On Thu, May 16, 2019 at 10:34:56PM +0200, Borislav Petkov wrote:
> On Thu, May 16, 2019 at 08:20:58PM +0000, Ghannam, Yazen wrote:
> > We don't actually know if there are bits set in hardware until we read
> > it back. So I don't think this is adding anything new.
> 
> Bah, of course. We need to read it first (pasting the whole function).
> Now, __mcheck_cpu_init_clear_banks() gets called when we change
> configuration too, in mce_cpu_restart() and if we do it this way, we'll
> be rereading MCi_CTL each time but I don't see anything wrong with that.

Intel doesn't "set any bits in hardware" ... so I think you'll just
get a 0x0 and disable everything.

> 
> Hmmm?
> 
> static void __mcheck_cpu_init_clear_banks(void)
> {
>         struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
>         int i;
> 
>         for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
>                 struct mce_bank *b = &mce_banks[i];
> 
>                 rdmsrl(msr_ops.ctl(i), b->ctl);
> 
>                 /* Bank is initialized if bits are set in hardware. */
>                 b->init = !!b->ctl;
>                 if (b->init) {
>                         wrmsrl(msr_ops.ctl(i), b->ctl);
>                         wrmsrl(msr_ops.status(i), 0);
>                 }
> 
>         }
> }


I think the intent of the original patch was to find out
which bits are "implemented in hardware". I.e. throw all
1's at the register and see if any of them stick.

I don't object to the idea behind the patch. But if you want
to do this you just should not modify b->ctl.

So something like:
	

static void __mcheck_cpu_init_clear_banks(void)
{
        struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
	u64 tmp;
        int i;

        for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
                struct mce_bank *b = &mce_banks[i];

                if (b->init) {
                        wrmsrl(msr_ops.ctl(i), b->ctl);
                        wrmsrl(msr_ops.status(i), 0);
			rdmsrl(msr_ops.ctl(i), tmp);

			/* Check if any bits implemented in h/w */
			b->init = !!tmp;
                }

        }
}

-Tony

-Tony

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Thu, May 16, 2019 at 01:59:43PM -0700, Luck, Tony wrote:
> I think the intent of the original patch was to find out
> which bits are "implemented in hardware". I.e. throw all
> 1's at the register and see if any of them stick.

And, in addition, check ->init before showing/setting a bank:

---
@@ -2095,6 +2098,9 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 
        b = &per_cpu(mce_banks_array, s->id)[bank];
 
+       if (!b->init)
+               return -ENODEV;
+
        return sprintf(buf, "%llx\n", b->ctl);
 }
 
@@ -2113,6 +2119,9 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 
        b = &per_cpu(mce_banks_array, s->id)[bank];
 
+       if (!b->init)
+               return -ENODEV;
+
        b->ctl = new;
        mce_restart();
---

so that you get a feedback whether the setting has even succeeded or
not. Right now we're doing "something" blindly and accepting any b->ctl
from userspace. Yeah, it is root-only but still...

> I don't object to the idea behind the patch. But if you want
> to do this you just should not modify b->ctl.
> 
> So something like:
> 	
> 
> static void __mcheck_cpu_init_clear_banks(void)
> {
>         struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
> 	u64 tmp;
>         int i;
> 
>         for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
>                 struct mce_bank *b = &mce_banks[i];
> 
>                 if (b->init) {
>                         wrmsrl(msr_ops.ctl(i), b->ctl);
>                         wrmsrl(msr_ops.status(i), 0);
> 			rdmsrl(msr_ops.ctl(i), tmp);
> 
> 			/* Check if any bits implemented in h/w */
> 			b->init = !!tmp;
>                 }

... except that we unconditionally set ->init to 1 in
__mcheck_cpu_mce_banks_init() and I think we should query it. Btw, that
name __mcheck_cpu_mce_banks_init() is hideous too. I'll fix those up. In
the meantime, how does the below look like? The change is to tickle out
from the hw whether some CTL bits stick and then use that to determine
b->init setting:

---
From: Yazen Ghannam <yazen.ghannam@amd.com>
Date: Tue, 30 Apr 2019 20:32:21 +0000
Subject: [PATCH] x86/MCE: Determine MCA banks' init state properly

The OS is expected to write all bits to MCA_CTL for each bank,
thus enabling error reporting in all banks. However, some banks
may be unused in which case the registers for such banks are
Read-as-Zero/Writes-Ignored. Also, the OS may avoid setting some control
bits because of quirks, etc.

A bank can be considered uninitialized if the MCA_CTL register returns
zero. This is because either the OS did not write anything or because
the hardware is enforcing RAZ/WI for the bank.

Set a bank's init value based on if the control bits are set or not in
hardware. Return an error code in the sysfs interface for uninitialized
banks.

 [ bp: Massage a bit. Discover bank init state at boot. ]

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "x86@kernel.org" <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190430203206.104163-7-Yazen.Ghannam@amd.com
---
 arch/x86/kernel/cpu/mce/core.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 5bcecadcf4d9..d84b0c707d0e 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1492,9 +1492,16 @@ static int __mcheck_cpu_mce_banks_init(void)
 
 	for (i = 0; i < n_banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+		u64 val;
 
 		b->ctl = -1ULL;
-		b->init = 1;
+
+		/* Check if any bits are implemented in h/w */
+		wrmsrl(msr_ops.ctl(i), b->ctl);
+		rdmsrl(msr_ops.ctl(i), val);
+		b->init = !!val;
+
+		wrmsrl(msr_ops.status(i), 0);
 	}
 
 	per_cpu(mce_banks_array, smp_processor_id()) = mce_banks;
@@ -1567,10 +1574,10 @@ static void __mcheck_cpu_init_clear_banks(void)
 	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
-		if (!b->init)
-			continue;
-		wrmsrl(msr_ops.ctl(i), b->ctl);
-		wrmsrl(msr_ops.status(i), 0);
+		if (b->init) {
+			wrmsrl(msr_ops.ctl(i), b->ctl);
+			wrmsrl(msr_ops.status(i), 0);
+		}
 	}
 }
 
@@ -2095,6 +2102,9 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_array, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	return sprintf(buf, "%llx\n", b->ctl);
 }
 
@@ -2113,6 +2123,9 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_array, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	b->ctl = new;
 	mce_restart();
 
-- 
2.21.0

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

RE: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Ghannam, Yazen]

> -----Original Message-----
> From: linux-edac-owner@vger.kernel.org <linux-edac-owner@vger.kernel.org> On Behalf Of Borislav Petkov
> Sent: Friday, May 17, 2019 5:10 AM
> To: Luck, Tony <tony.luck@intel.com>
> Cc: Ghannam, Yazen <Yazen.Ghannam@amd.com>; linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; x86@kernel.org
> Subject: Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware
> 
> 
> On Thu, May 16, 2019 at 01:59:43PM -0700, Luck, Tony wrote:
> > I think the intent of the original patch was to find out
> > which bits are "implemented in hardware". I.e. throw all
> > 1's at the register and see if any of them stick.
> 
> And, in addition, check ->init before showing/setting a bank:
> 
> ---
> @@ -2095,6 +2098,9 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,
> 
>         b = &per_cpu(mce_banks_array, s->id)[bank];
> 
> +       if (!b->init)
> +               return -ENODEV;
> +
>         return sprintf(buf, "%llx\n", b->ctl);
>  }
> 
> @@ -2113,6 +2119,9 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,
> 
>         b = &per_cpu(mce_banks_array, s->id)[bank];
> 
> +       if (!b->init)
> +               return -ENODEV;
> +
>         b->ctl = new;
>         mce_restart();
> ---
> 
> so that you get a feedback whether the setting has even succeeded or
> not. Right now we're doing "something" blindly and accepting any b->ctl
> from userspace. Yeah, it is root-only but still...
> 
> > I don't object to the idea behind the patch. But if you want
> > to do this you just should not modify b->ctl.
> >
> > So something like:
> >
> >
> > static void __mcheck_cpu_init_clear_banks(void)
> > {
> >         struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
> >       u64 tmp;
> >         int i;
> >
> >         for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
> >                 struct mce_bank *b = &mce_banks[i];
> >
> >                 if (b->init) {
> >                         wrmsrl(msr_ops.ctl(i), b->ctl);
> >                         wrmsrl(msr_ops.status(i), 0);
> >                       rdmsrl(msr_ops.ctl(i), tmp);
> >
> >                       /* Check if any bits implemented in h/w */
> >                       b->init = !!tmp;
> >                 }
> 
> ... except that we unconditionally set ->init to 1 in
> __mcheck_cpu_mce_banks_init() and I think we should query it. Btw, that
> name __mcheck_cpu_mce_banks_init() is hideous too. I'll fix those up. In
> the meantime, how does the below look like? The change is to tickle out
> from the hw whether some CTL bits stick and then use that to determine
> b->init setting:
> 
> ---
> From: Yazen Ghannam <yazen.ghannam@amd.com>
> Date: Tue, 30 Apr 2019 20:32:21 +0000
> Subject: [PATCH] x86/MCE: Determine MCA banks' init state properly
> 
> The OS is expected to write all bits to MCA_CTL for each bank,
> thus enabling error reporting in all banks. However, some banks
> may be unused in which case the registers for such banks are
> Read-as-Zero/Writes-Ignored. Also, the OS may avoid setting some control
> bits because of quirks, etc.
> 
> A bank can be considered uninitialized if the MCA_CTL register returns
> zero. This is because either the OS did not write anything or because
> the hardware is enforcing RAZ/WI for the bank.
> 
> Set a bank's init value based on if the control bits are set or not in
> hardware. Return an error code in the sysfs interface for uninitialized
> banks.
> 
>  [ bp: Massage a bit. Discover bank init state at boot. ]
> 
> Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
> Signed-off-by: Borislav Petkov <bp@suse.de>
> Cc: "H. Peter Anvin" <hpa@zytor.com>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Tony Luck <tony.luck@intel.com>
> Cc: "x86@kernel.org" <x86@kernel.org>
> Link: https://lkml.kernel.org/r/20190430203206.104163-7-Yazen.Ghannam@amd.com
> ---
>  arch/x86/kernel/cpu/mce/core.c | 23 ++++++++++++++++++-----
>  1 file changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
> index 5bcecadcf4d9..d84b0c707d0e 100644
> --- a/arch/x86/kernel/cpu/mce/core.c
> +++ b/arch/x86/kernel/cpu/mce/core.c
> @@ -1492,9 +1492,16 @@ static int __mcheck_cpu_mce_banks_init(void)
> 
>         for (i = 0; i < n_banks; i++) {
>                 struct mce_bank *b = &mce_banks[i];
> +               u64 val;
> 
>                 b->ctl = -1ULL;
> -               b->init = 1;
> +
> +               /* Check if any bits are implemented in h/w */
> +               wrmsrl(msr_ops.ctl(i), b->ctl);
> +               rdmsrl(msr_ops.ctl(i), val);
> +               b->init = !!val;
> +
> +               wrmsrl(msr_ops.status(i), 0);
>         }

I think there are a couple of issues here.
1) The bank is being initialized without accounting for any quirks.
2) The bank is being initialized without having set up any handler or other appropriate setup.

Thanks,
Yazen

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Fri, May 17, 2019 at 03:46:07PM +0000, Ghannam, Yazen wrote:
> I think there are a couple of issues here.
> 1) The bank is being initialized without accounting for any quirks.

Almost. __mcheck_cpu_init_clear_banks() a little bit later corrects
that. I guess I can drop the

	wrmsrl(msr_ops.status(i), 0);

in here because __mcheck_cpu_init_clear_banks() does that too.

Now, the

	wrmsrl(msr_ops.ctl(i), -1)
	rdmsrl(msr_ops.ctl(i), val);

method of throwing all 1s to see what sticks is what Intel wants, as
Tony said. Is that going to be a problem on AMD?

> 2) The bank is being initialized without having set up any handler or
> other appropriate setup.

I'm afraid you're going to have to explain this in more detail...

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Luck, Tony]

On Fri, May 17, 2019 at 06:37:29PM +0200, Borislav Petkov wrote:
> Now, the
> 
> 	wrmsrl(msr_ops.ctl(i), -1)
> 	rdmsrl(msr_ops.ctl(i), val);
> 
> method of throwing all 1s to see what sticks is what Intel wants, as
> Tony said. Is that going to be a problem on AMD?

It is what we want in general ...  but there is this:

        if (c->x86_vendor == X86_VENDOR_INTEL) {
                /*
                 * SDM documents that on family 6 bank 0 should not be written
                 * because it aliases to another special BIOS controlled
                 * register.
                 * But it's not aliased anymore on model 0x1a+
                 * Don't ignore bank 0 completely because there could be a
                 * valid event later, merely don't write CTL0.
                 */

                if (c->x86 == 6 && c->x86_model < 0x1A && cfg->banks > 0)
                        mce_banks[0].init = 0;

Which is a quirk for some models where we don't want to do
the "write all 1s and see what sticks"

-Tony

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Fri, May 17, 2019 at 10:26:49AM -0700, Luck, Tony wrote:
> Which is a quirk for some models where we don't want to do
> the "write all 1s and see what sticks"

Ok, then we have to do what you suggested yesterday. I've added a short
comment so that I don't get lost again next time.

---
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 5bcecadcf4d9..9056f0a2a90d 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1493,6 +1493,11 @@ static int __mcheck_cpu_mce_banks_init(void)
 	for (i = 0; i < n_banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
 
+		/*
+		 * Init them all, __mcheck_cpu_apply_quirks() is going to apply
+		 * the required vendor quirks before
+		 * __mcheck_cpu_init_clear_banks() does the final bank setup.
+		 */
 		b->ctl = -1ULL;
 		b->init = 1;
 	}
@@ -1562,15 +1567,21 @@ static void __mcheck_cpu_init_generic(void)
 static void __mcheck_cpu_init_clear_banks(void)
 {
 	struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
+	u64 msrval;
 	int i;
 
 	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
-		if (!b->init)
-			continue;
-		wrmsrl(msr_ops.ctl(i), b->ctl);
-		wrmsrl(msr_ops.status(i), 0);
+		if (b->init) {
+			/* Check if any bits are implemented in h/w */
+			wrmsrl(msr_ops.ctl(i), b->ctl);
+			rdmsrl(msr_ops.ctl(i), msrval);
+
+			b->init = !!msrval;
+
+			wrmsrl(msr_ops.status(i), 0);
+		}
 	}
 }
 
@@ -2095,6 +2106,9 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_array, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	return sprintf(buf, "%llx\n", b->ctl);
 }
 
@@ -2113,6 +2127,9 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_array, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	b->ctl = new;
 	mce_restart();
 
-- 
2.21.0

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Luck, Tony]

On Fri, May 17, 2019 at 07:48:17PM +0200, Borislav Petkov wrote:
> @@ -1562,15 +1567,21 @@ static void __mcheck_cpu_init_generic(void)
>  static void __mcheck_cpu_init_clear_banks(void)
>  {
>  	struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
> +	u64 msrval;
>  	int i;
>  
>  	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
>  		struct mce_bank *b = &mce_banks[i];
>  
> -		if (!b->init)
> -			continue;
> -		wrmsrl(msr_ops.ctl(i), b->ctl);
> -		wrmsrl(msr_ops.status(i), 0);
> +		if (b->init) {
> +			/* Check if any bits are implemented in h/w */
> +			wrmsrl(msr_ops.ctl(i), b->ctl);
> +			rdmsrl(msr_ops.ctl(i), msrval);
> +
> +			b->init = !!msrval;
> +
> +			wrmsrl(msr_ops.status(i), 0);
> +		}
>  	}
>  }

Am I misreading the diff here? It doesn't look like you
needed to drop the

	if (!b->init)
		continue;

and thus end up with that extra level on indent for the rest
of the function.

-Tony

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Fri, May 17, 2019 at 11:06:07AM -0700, Luck, Tony wrote:
> and thus end up with that extra level on indent for the rest
> of the function.

Ok:

---
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 5bcecadcf4d9..25e501a853cd 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1493,6 +1493,11 @@ static int __mcheck_cpu_mce_banks_init(void)
 	for (i = 0; i < n_banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
 
+		/*
+		 * Init them all, __mcheck_cpu_apply_quirks() is going to apply
+		 * the required vendor quirks before
+		 * __mcheck_cpu_init_clear_banks() does the final bank setup.
+		 */
 		b->ctl = -1ULL;
 		b->init = 1;
 	}
@@ -1562,6 +1567,7 @@ static void __mcheck_cpu_init_generic(void)
 static void __mcheck_cpu_init_clear_banks(void)
 {
 	struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
+	u64 msrval;
 	int i;
 
 	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
@@ -1569,7 +1575,13 @@ static void __mcheck_cpu_init_clear_banks(void)
 
 		if (!b->init)
 			continue;
+
+		/* Check if any bits are implemented in h/w */
 		wrmsrl(msr_ops.ctl(i), b->ctl);
+		rdmsrl(msr_ops.ctl(i), msrval);
+
+		b->init = !!msrval;
+
 		wrmsrl(msr_ops.status(i), 0);
 	}
 }
@@ -2095,6 +2107,9 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_array, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	return sprintf(buf, "%llx\n", b->ctl);
 }
 
@@ -2113,6 +2128,9 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_array, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	b->ctl = new;
 	mce_restart();
 

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Luck, Tony]

On Fri, May 17, 2019 at 09:34:31PM +0200, Borislav Petkov wrote:
> On Fri, May 17, 2019 at 11:06:07AM -0700, Luck, Tony wrote:
> > and thus end up with that extra level on indent for the rest
> > of the function.
> 
> Ok:
> 
> @@ -1569,7 +1575,13 @@ static void __mcheck_cpu_init_clear_banks(void)
>  
>  		if (!b->init)
>  			continue;
> +
> +		/* Check if any bits are implemented in h/w */
>  		wrmsrl(msr_ops.ctl(i), b->ctl);
> +		rdmsrl(msr_ops.ctl(i), msrval);
> +
> +		b->init = !!msrval;
> +
>  		wrmsrl(msr_ops.status(i), 0);
>  	}

Much neater :-)

Acked-by: Tony Luck <tony.luck@intel.com>

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Fri, May 17, 2019 at 12:44:05PM -0700, Luck, Tony wrote:
> Much neater :-)

Finally! :-)

> Acked-by: Tony Luck <tony.luck@intel.com>

Thx.

Yazen, any objections left?

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

RE: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Ghannam, Yazen]

> -----Original Message-----
> From: linux-edac-owner@vger.kernel.org <linux-edac-owner@vger.kernel.org> On Behalf Of Borislav Petkov
> Sent: Friday, May 17, 2019 2:35 PM
> To: Luck, Tony <tony.luck@intel.com>
> Cc: Ghannam, Yazen <Yazen.Ghannam@amd.com>; linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; x86@kernel.org
> Subject: Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware
> 
> 
> On Fri, May 17, 2019 at 11:06:07AM -0700, Luck, Tony wrote:
> > and thus end up with that extra level on indent for the rest
> > of the function.
> 
> Ok:
> 
> ---
> diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
> index 5bcecadcf4d9..25e501a853cd 100644
> --- a/arch/x86/kernel/cpu/mce/core.c
> +++ b/arch/x86/kernel/cpu/mce/core.c
> @@ -1493,6 +1493,11 @@ static int __mcheck_cpu_mce_banks_init(void)
>         for (i = 0; i < n_banks; i++) {
>                 struct mce_bank *b = &mce_banks[i];
> 
> +               /*
> +                * Init them all, __mcheck_cpu_apply_quirks() is going to apply
> +                * the required vendor quirks before
> +                * __mcheck_cpu_init_clear_banks() does the final bank setup.
> +                */
>                 b->ctl = -1ULL;
>                 b->init = 1;
>         }
> @@ -1562,6 +1567,7 @@ static void __mcheck_cpu_init_generic(void)
>  static void __mcheck_cpu_init_clear_banks(void)
>  {
>         struct mce_bank *mce_banks = this_cpu_read(mce_banks_array);
> +       u64 msrval;
>         int i;
> 
>         for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
> @@ -1569,7 +1575,13 @@ static void __mcheck_cpu_init_clear_banks(void)
> 
>                 if (!b->init)
>                         continue;
> +
> +               /* Check if any bits are implemented in h/w */
>                 wrmsrl(msr_ops.ctl(i), b->ctl);
> +               rdmsrl(msr_ops.ctl(i), msrval);
> +
> +               b->init = !!msrval;
> +

Just a minor nit, but can we group the comment, RDMSR, and check together? The WRMSR is part of normal operation and isn't tied to the check.

Thanks,
Yazen

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Fri, May 17, 2019 at 07:49:10PM +0000, Ghannam, Yazen wrote:
> > @@ -1569,7 +1575,13 @@ static void __mcheck_cpu_init_clear_banks(void)
> > 
> >                 if (!b->init)
> >                         continue;
> > +
> > +               /* Check if any bits are implemented in h/w */
> >                 wrmsrl(msr_ops.ctl(i), b->ctl);
> > +               rdmsrl(msr_ops.ctl(i), msrval);
> > +
> > +               b->init = !!msrval;
> > +
> Just a minor nit, but can we group the comment, RDMSR, and check
> together? The WRMSR is part of normal operation and isn't tied to the
> check.

Of course it is - that's the "throw all 1s at it" part :)

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

RE: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Ghannam, Yazen]

> -----Original Message-----
> From: Borislav Petkov <bp@alien8.de>
> Sent: Friday, May 17, 2019 3:02 PM
> To: Ghannam, Yazen <Yazen.Ghannam@amd.com>
> Cc: Luck, Tony <tony.luck@intel.com>; linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; x86@kernel.org
> Subject: Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware
> 
> 
> On Fri, May 17, 2019 at 07:49:10PM +0000, Ghannam, Yazen wrote:
> > > @@ -1569,7 +1575,13 @@ static void __mcheck_cpu_init_clear_banks(void)
> > >
> > >                 if (!b->init)
> > >                         continue;
> > > +
> > > +               /* Check if any bits are implemented in h/w */
> > >                 wrmsrl(msr_ops.ctl(i), b->ctl);
> > > +               rdmsrl(msr_ops.ctl(i), msrval);
> > > +
> > > +               b->init = !!msrval;
> > > +
> > Just a minor nit, but can we group the comment, RDMSR, and check
> > together? The WRMSR is part of normal operation and isn't tied to the
> > check.
> 
> Of course it is - that's the "throw all 1s at it" part :)
> 

I did a bit more testing and I noticed that writing "0" disables a bank with no way to reenable it.

For example:
1) Read bank10.
	a) Succeeds; returns "fffffffffffffff".
2) Write "0" to bank10.
	a) Succeeds; hardware register is set to "0".
	b) Hardware register is checked, and b->init=0.
3) Read bank10.
	a) Fails, because b->init=0.
4) Write non-zero value to bank10 to reenable it.
	a) Fails, because b->init=0.
5) Reboot needed to reset bank.

Is that okay?

Thanks,
Yazen

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Thu, May 23, 2019 at 08:00:33PM +0000, Ghannam, Yazen wrote:
> I did a bit more testing and I noticed that writing "0" disables a bank with no way to reenable it.
> 
> For example:
> 1) Read bank10.
> 	a) Succeeds; returns "fffffffffffffff".
> 2) Write "0" to bank10.
> 	a) Succeeds; hardware register is set to "0".
> 	b) Hardware register is checked, and b->init=0.
> 3) Read bank10.
> 	a) Fails, because b->init=0.
> 4) Write non-zero value to bank10 to reenable it.
> 	a) Fails, because b->init=0.
> 5) Reboot needed to reset bank.
> 
> Is that okay?

Nope, that doesn't sound correct to me.

I guess the cleanest way to handle his properly would be to have a
function called something like __mcheck_cpu_init_banks() which gets
called in mcheck_cpu_init() after the quirks have run and then does the
final poking of the banks and sets b->init properly.

__mcheck_cpu_init_clear_banks() should then be renamed to
__mcheck_cpu_clear_banks() to denote that it only clears the banks and
would only do:

                if (!b->init)
                        continue;

                wrmsrl(msr_ops.ctl(i), b->ctl);
                wrmsrl(msr_ops.status(i), 0);

And then sprinkle some commenting to not forget the scheme again.

Yeah, this sounds clean to me but you guys might have a better idea...

Thx.

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply. Srsly.

RE: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Ghannam, Yazen]

> -----Original Message-----
> From: Borislav Petkov <bp@alien8.de>
> Sent: Monday, May 27, 2019 6:29 PM
> To: Ghannam, Yazen <Yazen.Ghannam@amd.com>
> Cc: Luck, Tony <tony.luck@intel.com>; linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; x86@kernel.org
> Subject: Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware
> 
> 
> I guess the cleanest way to handle his properly would be to have a
> function called something like __mcheck_cpu_init_banks() which gets
> called in mcheck_cpu_init() after the quirks have run and then does the
> final poking of the banks and sets b->init properly.
> 
> __mcheck_cpu_init_clear_banks() should then be renamed to
> __mcheck_cpu_clear_banks() to denote that it only clears the banks and
> would only do:
> 
>                 if (!b->init)
>                         continue;
> 
>                 wrmsrl(msr_ops.ctl(i), b->ctl);
>                 wrmsrl(msr_ops.status(i), 0);
> 

Would you mind if the function name stayed the same? The reason is that MCA_CTL is written here, which is the "init" part, and MCA_STATUS is cleared.

I can use another name for the check, e.g. __mcheck_cpu_check_banks() or __mcheck_cpu_banks_check_init().

Thanks,
Yazen

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Fri, Jun 07, 2019 at 02:49:42PM +0000, Ghannam, Yazen wrote:
> Would you mind if the function name stayed the same? The reason is
> that MCA_CTL is written here, which is the "init" part, and MCA_STATUS
> is cleared.
>
> I can use another name for the check, e.g. __mcheck_cpu_check_banks()
> or __mcheck_cpu_banks_check_init().

Nevermind, leave it as is. I'll fix it up ontop. I don't like that
"__mcheck_cpu_init" prefixing there which is a mouthful and should
simply be "mce_cpu_<do_stuff>" to denote that it is a function which is
run on a CPU to setup stuff.

Thx.

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

RE: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Ghannam, Yazen]

> -----Original Message-----
> From: linux-edac-owner@vger.kernel.org <linux-edac-owner@vger.kernel.org> On Behalf Of Borislav Petkov
> Sent: Friday, June 7, 2019 11:37 AM
> To: Ghannam, Yazen <Yazen.Ghannam@amd.com>
> Cc: Luck, Tony <tony.luck@intel.com>; linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; x86@kernel.org
> Subject: Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware
> 
> On Fri, Jun 07, 2019 at 02:49:42PM +0000, Ghannam, Yazen wrote:
> > Would you mind if the function name stayed the same? The reason is
> > that MCA_CTL is written here, which is the "init" part, and MCA_STATUS
> > is cleared.
> >
> > I can use another name for the check, e.g. __mcheck_cpu_check_banks()
> > or __mcheck_cpu_banks_check_init().
> 
> Nevermind, leave it as is. I'll fix it up ontop. I don't like that
> "__mcheck_cpu_init" prefixing there which is a mouthful and should
> simply be "mce_cpu_<do_stuff>" to denote that it is a function which is
> run on a CPU to setup stuff.
> 

Yeah, I agree.

I have another version of this set that I can send today. It includes the changes for this patch and also includes the fix for the locking bug message.

Should I send out the new version? Or do you want me to wait for any fixes on top of the current version?

Thanks,
Yazen

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Fri, Jun 07, 2019 at 04:44:24PM +0000, Ghannam, Yazen wrote:
> I have another version of this set that I can send today. It includes
> the changes for this patch and also includes the fix for the locking
> bug message.
>
> Should I send out the new version? Or do you want me to wait for any
> fixes on top of the current version?

I don't understand - I think we said to feel free to rework it all by using

https://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git/log/?h=rc0%2b3-ras

and reworking the whole branch to accomodate the changes and then
sending a whole new series...

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

RE: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Ghannam, Yazen]

> -----Original Message-----
> From: linux-edac-owner@vger.kernel.org <linux-edac-owner@vger.kernel.org> On Behalf Of Borislav Petkov
> Sent: Friday, June 7, 2019 11:59 AM
> To: Ghannam, Yazen <Yazen.Ghannam@amd.com>
> Cc: Luck, Tony <tony.luck@intel.com>; linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; x86@kernel.org
> Subject: Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware
> 
> On Fri, Jun 07, 2019 at 04:44:24PM +0000, Ghannam, Yazen wrote:
> > I have another version of this set that I can send today. It includes
> > the changes for this patch and also includes the fix for the locking
> > bug message.
> >
> > Should I send out the new version? Or do you want me to wait for any
> > fixes on top of the current version?
> 
> I don't understand - I think we said to feel free to rework it all by using
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git/log/?h=rc0%2b3-ras
> 
> and reworking the whole branch to accomodate the changes and then
> sending a whole new series...
> 

Right, I took that branch, squashed the locking fix into patch 2, fixed up the remaining patches, and then redid the last patch.

I plan to send the result as a v4 of this patchset with all the links, version history, etc. Is that what you mean? Sorry, if I misunderstood.

Thanks,
Yazen

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Fri, Jun 07, 2019 at 05:08:04PM +0000, Ghannam, Yazen wrote:
> Right, I took that branch, squashed the locking fix into patch 2,
> fixed up the remaining patches, and then redid the last patch.
>
> I plan to send the result as a v4 of this patchset with all the links,
> version history, etc. Is that what you mean?

Yap, exactly!

> Sorry, if I misunderstood.

No worries, we're on the same page now :-)

Thx.

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

Re: [PATCH v3 5/6] x86/MCE: Save MCA control bits that get set in hardware

[Borislav Petkov]

On Fri, Jun 07, 2019 at 06:37:23PM +0200, Borislav Petkov wrote:
> On Fri, Jun 07, 2019 at 02:49:42PM +0000, Ghannam, Yazen wrote:
> > Would you mind if the function name stayed the same? The reason is
> > that MCA_CTL is written here, which is the "init" part, and MCA_STATUS
> > is cleared.
> >
> > I can use another name for the check, e.g. __mcheck_cpu_check_banks()
> > or __mcheck_cpu_banks_check_init().
> 
> Nevermind, leave it as is. I'll fix it up ontop. I don't like that
> "__mcheck_cpu_init" prefixing there which is a mouthful and should
> simply be "mce_cpu_<do_stuff>" to denote that it is a function which is
> run on a CPU to setup stuff.

So I'm staring at this and I can't say that I'm getting any good ideas:

I wanna get rid of that ugly "__mcheck_cpu_" prefix but the replacements
I can think of right now, are crap:

* I can call them all "cpu_<bla>" but then they look like generic
cpu-setup functions which come from kernel/cpu.c or so.

* I can prefix them with "mce_cpu" but when you do them all, it becomes
a block of "mce_cpu_" stuff which ain't more readable either. And
besides, those are static functions so they shouldn't need the prefix.
But I'd like the naming to denote that they're doing per-CPU setup
stuff. Which brings me to the previous point.

So no, don't have a good idea yet...

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

[v3,4/6] x86/MCE: Make number of MCA banks per_cpu

[Yazen Ghannam]

From: Yazen Ghannam <yazen.ghannam@amd.com>

The number of MCA banks is provided per logical CPU. Historically, this
number has been the same across all CPUs, but this is not an
architectural guarantee. Future AMD systems may have MCA bank counts
that vary between logical CPUs in a system.

This issue was partially addressed in

006c077041dc ("x86/mce: Handle varying MCA bank counts")

by allocating structures using the maximum number of MCA banks and by
saving the maximum MCA bank count in a system as the global count. This
means that some extra structures are allocated. Also, this means that
CPUs will spend more time in the #MC and other handlers checking extra
MCA banks.

Define the number of MCA banks as a per_cpu variable. Replace all uses
of mca_cfg.banks with this.

Also, use the per_cpu bank count when allocating per_cpu structures.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-5-Yazen.Ghannam@amd.com

v2->v3:
* Drop pr_debug() message.
* Change commit reference format.

v1->v2:
* Drop export of new variable and leave injector code as-is.
* Add "mce_" prefix to new "num_banks" variable.

 arch/x86/kernel/cpu/mce/amd.c      | 17 ++++++-----
 arch/x86/kernel/cpu/mce/core.c     | 47 +++++++++++++++++-------------
 arch/x86/kernel/cpu/mce/internal.h |  2 +-
 3 files changed, 36 insertions(+), 30 deletions(-)

-- 
2.17.1

diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index d4d6e4b7f9dc..9f729d50676c 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -495,7 +495,7 @@ static u32 get_block_address(u32 current_addr, u32 low, u32 high,
 {
 	u32 addr = 0, offset = 0;
 
-	if ((bank >= mca_cfg.banks) || (block >= NR_BLOCKS))
+	if ((bank >= per_cpu(mce_num_banks, cpu)) || (block >= NR_BLOCKS))
 		return addr;
 
 	if (mce_flags.smca)
@@ -631,7 +631,8 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 	unsigned int bank, block, cpu = smp_processor_id();
 	int offset = -1;
 
-	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+
+	for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank) {
 		if (mce_flags.smca)
 			smca_configure(bank, cpu);
 
@@ -976,7 +977,7 @@ static void amd_deferred_error_interrupt(void)
 {
 	unsigned int bank;
 
-	for (bank = 0; bank < mca_cfg.banks; ++bank)
+	for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank)
 		log_error_deferred(bank);
 }
 
@@ -1017,7 +1018,7 @@ static void amd_threshold_interrupt(void)
 	struct threshold_block *first_block = NULL, *block = NULL, *tmp = NULL;
 	unsigned int bank, cpu = smp_processor_id();
 
-	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+	for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank) {
 		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
 			continue;
 
@@ -1204,7 +1205,7 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
 	u32 low, high;
 	int err;
 
-	if ((bank >= mca_cfg.banks) || (block >= NR_BLOCKS))
+	if ((bank >= per_cpu(mce_num_banks, cpu)) || (block >= NR_BLOCKS))
 		return 0;
 
 	if (rdmsr_safe_on_cpu(cpu, address, &low, &high))
@@ -1438,7 +1439,7 @@ int mce_threshold_remove_device(unsigned int cpu)
 {
 	unsigned int bank;
 
-	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+	for (bank = 0; bank < per_cpu(mce_num_banks, cpu); ++bank) {
 		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
 			continue;
 		threshold_remove_bank(cpu, bank);
@@ -1459,14 +1460,14 @@ int mce_threshold_create_device(unsigned int cpu)
 	if (bp)
 		return 0;
 
-	bp = kcalloc(mca_cfg.banks, sizeof(struct threshold_bank *),
+	bp = kcalloc(per_cpu(mce_num_banks, cpu), sizeof(struct threshold_bank *),
 		     GFP_KERNEL);
 	if (!bp)
 		return -ENOMEM;
 
 	per_cpu(threshold_banks, cpu) = bp;
 
-	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+	for (bank = 0; bank < per_cpu(mce_num_banks, cpu); ++bank) {
 		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
 			continue;
 		err = threshold_create_bank(cpu, bank);
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 66347bdc8b08..986de830f26e 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -64,6 +64,8 @@ static DEFINE_MUTEX(mce_sysfs_mutex);
 
 DEFINE_PER_CPU(unsigned, mce_exception_count);
 
+DEFINE_PER_CPU_READ_MOSTLY(u8, mce_num_banks);
+
 struct mce_bank {
 	u64			ctl;			/* subevents to enable */
 	bool			init;			/* initialise bank? */
@@ -700,7 +702,7 @@ bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 	if (flags & MCP_TIMESTAMP)
 		m.tsc = rdtsc();
 
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		if (!mce_banks[i].ctl || !test_bit(i, *b))
 			continue;
 
@@ -802,7 +804,7 @@ static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp,
 	char *tmp;
 	int i;
 
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		m->status = mce_rdmsrl(msr_ops.status(i));
 		if (!(m->status & MCI_STATUS_VAL))
 			continue;
@@ -1082,7 +1084,7 @@ static void mce_clear_state(unsigned long *toclear)
 {
 	int i;
 
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		if (test_bit(i, toclear))
 			mce_wrmsrl(msr_ops.status(i), 0);
 	}
@@ -1140,7 +1142,7 @@ static void __mc_scan_banks(struct mce *m, struct mce *final,
 	struct mca_config *cfg = &mca_cfg;
 	int severity, i;
 
-	for (i = 0; i < cfg->banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		__clear_bit(i, toclear);
 		if (!test_bit(i, valid_banks))
 			continue;
@@ -1480,14 +1482,15 @@ EXPORT_SYMBOL_GPL(mce_notify_irq);
 
 static int __mcheck_cpu_mce_banks_init(void)
 {
+	u8 n_banks = this_cpu_read(mce_num_banks);
 	struct mce_bank *mce_banks;
 	int i;
 
-	mce_banks = kcalloc(MAX_NR_BANKS, sizeof(struct mce_bank), GFP_KERNEL);
+	mce_banks = kcalloc(n_banks, sizeof(struct mce_bank), GFP_KERNEL);
 	if (!mce_banks)
 		return -ENOMEM;
 
-	for (i = 0; i < MAX_NR_BANKS; i++) {
+	for (i = 0; i < n_banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
 
 		b->ctl = -1ULL;
@@ -1509,10 +1512,14 @@ static int __mcheck_cpu_cap_init(void)
 	rdmsrl(MSR_IA32_MCG_CAP, cap);
 
 	b = cap & MCG_BANKCNT_MASK;
-	if (WARN_ON_ONCE(b > MAX_NR_BANKS))
+
+	if (b > MAX_NR_BANKS) {
+		pr_warn("CPU%d: Using only %u machine check banks out of %u\n",
+			smp_processor_id(), MAX_NR_BANKS, b);
 		b = MAX_NR_BANKS;
+	}
 
-	mca_cfg.banks = max(mca_cfg.banks, b);
+	this_cpu_write(mce_num_banks, b);
 
 	if (!this_cpu_read(mce_banks_percpu)) {
 		int err = __mcheck_cpu_mce_banks_init();
@@ -1557,7 +1564,7 @@ static void __mcheck_cpu_init_clear_banks(void)
 	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	int i;
 
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
 		if (!b->init)
@@ -1608,7 +1615,7 @@ static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 
 	/* This should be disabled by the BIOS, but isn't always */
 	if (c->x86_vendor == X86_VENDOR_AMD) {
-		if (c->x86 == 15 && cfg->banks > 4) {
+		if (c->x86 == 15 && this_cpu_read(mce_num_banks) > 4) {
 			/*
 			 * disable GART TBL walk error reporting, which
 			 * trips off incorrectly with the IOMMU & 3ware
@@ -1627,7 +1634,7 @@ static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 		 * Various K7s with broken bank 0 around. Always disable
 		 * by default.
 		 */
-		if (c->x86 == 6 && cfg->banks > 0)
+		if (c->x86 == 6 && this_cpu_read(mce_num_banks) > 0)
 			mce_banks[0].ctl = 0;
 
 		/*
@@ -1649,7 +1656,7 @@ static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 		 * valid event later, merely don't write CTL0.
 		 */
 
-		if (c->x86 == 6 && c->x86_model < 0x1A && cfg->banks > 0)
+		if (c->x86 == 6 && c->x86_model < 0x1A && this_cpu_read(mce_num_banks) > 0)
 			mce_banks[0].init = 0;
 
 		/*
@@ -1883,7 +1890,7 @@ static void __mce_disable_bank(void *arg)
 
 void mce_disable_bank(int bank)
 {
-	if (bank >= mca_cfg.banks) {
+	if (bank >= this_cpu_read(mce_num_banks)) {
 		pr_warn(FW_BUG
 			"Ignoring request to disable invalid MCA bank %d.\n",
 			bank);
@@ -1972,7 +1979,7 @@ static void mce_disable_error_reporting(void)
 	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	int i;
 
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
 		if (b->init)
@@ -2083,7 +2090,7 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 	u8 bank = attr_to_bank(attr)->bank;
 	struct mce_bank *b;
 
-	if (bank >= mca_cfg.banks)
+	if (bank >= per_cpu(mce_num_banks, s->id))
 		return -EINVAL;
 
 	b = &per_cpu(mce_banks_percpu, s->id)[bank];
@@ -2101,7 +2108,7 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 	if (kstrtou64(buf, 0, &new) < 0)
 		return -EINVAL;
 
-	if (bank >= mca_cfg.banks)
+	if (bank >= per_cpu(mce_num_banks, s->id))
 		return -EINVAL;
 
 	b = &per_cpu(mce_banks_percpu, s->id)[bank];
@@ -2253,7 +2260,7 @@ static int mce_device_create(unsigned int cpu)
 		if (err)
 			goto error;
 	}
-	for (j = 0; j < mca_cfg.banks; j++) {
+	for (j = 0; j < per_cpu(mce_num_banks, cpu); j++) {
 		err = device_create_file(dev, &mce_bank_devs[j].attr);
 		if (err)
 			goto error2;
@@ -2285,7 +2292,7 @@ static void mce_device_remove(unsigned int cpu)
 	for (i = 0; mce_device_attrs[i]; i++)
 		device_remove_file(dev, mce_device_attrs[i]);
 
-	for (i = 0; i < mca_cfg.banks; i++)
+	for (i = 0; i < per_cpu(mce_num_banks, cpu); i++)
 		device_remove_file(dev, &mce_bank_devs[i].attr);
 
 	device_unregister(dev);
@@ -2315,7 +2322,7 @@ static void mce_reenable_cpu(void)
 
 	if (!cpuhp_tasks_frozen)
 		cmci_reenable();
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
 		if (b->init)
@@ -2503,8 +2510,6 @@ EXPORT_SYMBOL_GPL(mcsafe_key);
 
 static int __init mcheck_late_init(void)
 {
-	pr_info("Using %d MCE banks\n", mca_cfg.banks);
-
 	if (mca_cfg.recovery)
 		static_branch_inc(&mcsafe_key);
 
diff --git a/arch/x86/kernel/cpu/mce/internal.h b/arch/x86/kernel/cpu/mce/internal.h
index 35b3e5c02c1c..5215dcd01614 100644
--- a/arch/x86/kernel/cpu/mce/internal.h
+++ b/arch/x86/kernel/cpu/mce/internal.h
@@ -118,7 +118,6 @@ struct mca_config {
 	      bios_cmci_threshold	: 1,
 	      __reserved		: 59;
 
-	u8 banks;
 	s8 bootlog;
 	int tolerant;
 	int monarch_timeout;
@@ -127,6 +126,7 @@ struct mca_config {
 };
 
 extern struct mca_config mca_cfg;
+DECLARE_PER_CPU_READ_MOSTLY(u8, mce_num_banks);
 
 struct mce_vendor_flags {
 	/*

[PATCH v3 4/6] x86/MCE: Make number of MCA banks per_cpu

[Ghannam, Yazen]

From: Yazen Ghannam <yazen.ghannam@amd.com>

The number of MCA banks is provided per logical CPU. Historically, this
number has been the same across all CPUs, but this is not an
architectural guarantee. Future AMD systems may have MCA bank counts
that vary between logical CPUs in a system.

This issue was partially addressed in

006c077041dc ("x86/mce: Handle varying MCA bank counts")

by allocating structures using the maximum number of MCA banks and by
saving the maximum MCA bank count in a system as the global count. This
means that some extra structures are allocated. Also, this means that
CPUs will spend more time in the #MC and other handlers checking extra
MCA banks.

Define the number of MCA banks as a per_cpu variable. Replace all uses
of mca_cfg.banks with this.

Also, use the per_cpu bank count when allocating per_cpu structures.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-5-Yazen.Ghannam@amd.com

v2->v3:
* Drop pr_debug() message.
* Change commit reference format.

v1->v2:
* Drop export of new variable and leave injector code as-is.
* Add "mce_" prefix to new "num_banks" variable.

 arch/x86/kernel/cpu/mce/amd.c      | 17 ++++++-----
 arch/x86/kernel/cpu/mce/core.c     | 47 +++++++++++++++++-------------
 arch/x86/kernel/cpu/mce/internal.h |  2 +-
 3 files changed, 36 insertions(+), 30 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index d4d6e4b7f9dc..9f729d50676c 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -495,7 +495,7 @@ static u32 get_block_address(u32 current_addr, u32 low, u32 high,
 {
 	u32 addr = 0, offset = 0;
 
-	if ((bank >= mca_cfg.banks) || (block >= NR_BLOCKS))
+	if ((bank >= per_cpu(mce_num_banks, cpu)) || (block >= NR_BLOCKS))
 		return addr;
 
 	if (mce_flags.smca)
@@ -631,7 +631,8 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 	unsigned int bank, block, cpu = smp_processor_id();
 	int offset = -1;
 
-	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+
+	for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank) {
 		if (mce_flags.smca)
 			smca_configure(bank, cpu);
 
@@ -976,7 +977,7 @@ static void amd_deferred_error_interrupt(void)
 {
 	unsigned int bank;
 
-	for (bank = 0; bank < mca_cfg.banks; ++bank)
+	for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank)
 		log_error_deferred(bank);
 }
 
@@ -1017,7 +1018,7 @@ static void amd_threshold_interrupt(void)
 	struct threshold_block *first_block = NULL, *block = NULL, *tmp = NULL;
 	unsigned int bank, cpu = smp_processor_id();
 
-	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+	for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank) {
 		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
 			continue;
 
@@ -1204,7 +1205,7 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
 	u32 low, high;
 	int err;
 
-	if ((bank >= mca_cfg.banks) || (block >= NR_BLOCKS))
+	if ((bank >= per_cpu(mce_num_banks, cpu)) || (block >= NR_BLOCKS))
 		return 0;
 
 	if (rdmsr_safe_on_cpu(cpu, address, &low, &high))
@@ -1438,7 +1439,7 @@ int mce_threshold_remove_device(unsigned int cpu)
 {
 	unsigned int bank;
 
-	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+	for (bank = 0; bank < per_cpu(mce_num_banks, cpu); ++bank) {
 		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
 			continue;
 		threshold_remove_bank(cpu, bank);
@@ -1459,14 +1460,14 @@ int mce_threshold_create_device(unsigned int cpu)
 	if (bp)
 		return 0;
 
-	bp = kcalloc(mca_cfg.banks, sizeof(struct threshold_bank *),
+	bp = kcalloc(per_cpu(mce_num_banks, cpu), sizeof(struct threshold_bank *),
 		     GFP_KERNEL);
 	if (!bp)
 		return -ENOMEM;
 
 	per_cpu(threshold_banks, cpu) = bp;
 
-	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+	for (bank = 0; bank < per_cpu(mce_num_banks, cpu); ++bank) {
 		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
 			continue;
 		err = threshold_create_bank(cpu, bank);
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 66347bdc8b08..986de830f26e 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -64,6 +64,8 @@ static DEFINE_MUTEX(mce_sysfs_mutex);
 
 DEFINE_PER_CPU(unsigned, mce_exception_count);
 
+DEFINE_PER_CPU_READ_MOSTLY(u8, mce_num_banks);
+
 struct mce_bank {
 	u64			ctl;			/* subevents to enable */
 	bool			init;			/* initialise bank? */
@@ -700,7 +702,7 @@ bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 	if (flags & MCP_TIMESTAMP)
 		m.tsc = rdtsc();
 
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		if (!mce_banks[i].ctl || !test_bit(i, *b))
 			continue;
 
@@ -802,7 +804,7 @@ static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp,
 	char *tmp;
 	int i;
 
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		m->status = mce_rdmsrl(msr_ops.status(i));
 		if (!(m->status & MCI_STATUS_VAL))
 			continue;
@@ -1082,7 +1084,7 @@ static void mce_clear_state(unsigned long *toclear)
 {
 	int i;
 
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		if (test_bit(i, toclear))
 			mce_wrmsrl(msr_ops.status(i), 0);
 	}
@@ -1140,7 +1142,7 @@ static void __mc_scan_banks(struct mce *m, struct mce *final,
 	struct mca_config *cfg = &mca_cfg;
 	int severity, i;
 
-	for (i = 0; i < cfg->banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		__clear_bit(i, toclear);
 		if (!test_bit(i, valid_banks))
 			continue;
@@ -1480,14 +1482,15 @@ EXPORT_SYMBOL_GPL(mce_notify_irq);
 
 static int __mcheck_cpu_mce_banks_init(void)
 {
+	u8 n_banks = this_cpu_read(mce_num_banks);
 	struct mce_bank *mce_banks;
 	int i;
 
-	mce_banks = kcalloc(MAX_NR_BANKS, sizeof(struct mce_bank), GFP_KERNEL);
+	mce_banks = kcalloc(n_banks, sizeof(struct mce_bank), GFP_KERNEL);
 	if (!mce_banks)
 		return -ENOMEM;
 
-	for (i = 0; i < MAX_NR_BANKS; i++) {
+	for (i = 0; i < n_banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
 
 		b->ctl = -1ULL;
@@ -1509,10 +1512,14 @@ static int __mcheck_cpu_cap_init(void)
 	rdmsrl(MSR_IA32_MCG_CAP, cap);
 
 	b = cap & MCG_BANKCNT_MASK;
-	if (WARN_ON_ONCE(b > MAX_NR_BANKS))
+
+	if (b > MAX_NR_BANKS) {
+		pr_warn("CPU%d: Using only %u machine check banks out of %u\n",
+			smp_processor_id(), MAX_NR_BANKS, b);
 		b = MAX_NR_BANKS;
+	}
 
-	mca_cfg.banks = max(mca_cfg.banks, b);
+	this_cpu_write(mce_num_banks, b);
 
 	if (!this_cpu_read(mce_banks_percpu)) {
 		int err = __mcheck_cpu_mce_banks_init();
@@ -1557,7 +1564,7 @@ static void __mcheck_cpu_init_clear_banks(void)
 	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	int i;
 
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
 		if (!b->init)
@@ -1608,7 +1615,7 @@ static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 
 	/* This should be disabled by the BIOS, but isn't always */
 	if (c->x86_vendor == X86_VENDOR_AMD) {
-		if (c->x86 == 15 && cfg->banks > 4) {
+		if (c->x86 == 15 && this_cpu_read(mce_num_banks) > 4) {
 			/*
 			 * disable GART TBL walk error reporting, which
 			 * trips off incorrectly with the IOMMU & 3ware
@@ -1627,7 +1634,7 @@ static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 		 * Various K7s with broken bank 0 around. Always disable
 		 * by default.
 		 */
-		if (c->x86 == 6 && cfg->banks > 0)
+		if (c->x86 == 6 && this_cpu_read(mce_num_banks) > 0)
 			mce_banks[0].ctl = 0;
 
 		/*
@@ -1649,7 +1656,7 @@ static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 		 * valid event later, merely don't write CTL0.
 		 */
 
-		if (c->x86 == 6 && c->x86_model < 0x1A && cfg->banks > 0)
+		if (c->x86 == 6 && c->x86_model < 0x1A && this_cpu_read(mce_num_banks) > 0)
 			mce_banks[0].init = 0;
 
 		/*
@@ -1883,7 +1890,7 @@ static void __mce_disable_bank(void *arg)
 
 void mce_disable_bank(int bank)
 {
-	if (bank >= mca_cfg.banks) {
+	if (bank >= this_cpu_read(mce_num_banks)) {
 		pr_warn(FW_BUG
 			"Ignoring request to disable invalid MCA bank %d.\n",
 			bank);
@@ -1972,7 +1979,7 @@ static void mce_disable_error_reporting(void)
 	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	int i;
 
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
 		if (b->init)
@@ -2083,7 +2090,7 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 	u8 bank = attr_to_bank(attr)->bank;
 	struct mce_bank *b;
 
-	if (bank >= mca_cfg.banks)
+	if (bank >= per_cpu(mce_num_banks, s->id))
 		return -EINVAL;
 
 	b = &per_cpu(mce_banks_percpu, s->id)[bank];
@@ -2101,7 +2108,7 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 	if (kstrtou64(buf, 0, &new) < 0)
 		return -EINVAL;
 
-	if (bank >= mca_cfg.banks)
+	if (bank >= per_cpu(mce_num_banks, s->id))
 		return -EINVAL;
 
 	b = &per_cpu(mce_banks_percpu, s->id)[bank];
@@ -2253,7 +2260,7 @@ static int mce_device_create(unsigned int cpu)
 		if (err)
 			goto error;
 	}
-	for (j = 0; j < mca_cfg.banks; j++) {
+	for (j = 0; j < per_cpu(mce_num_banks, cpu); j++) {
 		err = device_create_file(dev, &mce_bank_devs[j].attr);
 		if (err)
 			goto error2;
@@ -2285,7 +2292,7 @@ static void mce_device_remove(unsigned int cpu)
 	for (i = 0; mce_device_attrs[i]; i++)
 		device_remove_file(dev, mce_device_attrs[i]);
 
-	for (i = 0; i < mca_cfg.banks; i++)
+	for (i = 0; i < per_cpu(mce_num_banks, cpu); i++)
 		device_remove_file(dev, &mce_bank_devs[i].attr);
 
 	device_unregister(dev);
@@ -2315,7 +2322,7 @@ static void mce_reenable_cpu(void)
 
 	if (!cpuhp_tasks_frozen)
 		cmci_reenable();
-	for (i = 0; i < mca_cfg.banks; i++) {
+	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
 
 		if (b->init)
@@ -2503,8 +2510,6 @@ EXPORT_SYMBOL_GPL(mcsafe_key);
 
 static int __init mcheck_late_init(void)
 {
-	pr_info("Using %d MCE banks\n", mca_cfg.banks);
-
 	if (mca_cfg.recovery)
 		static_branch_inc(&mcsafe_key);
 
diff --git a/arch/x86/kernel/cpu/mce/internal.h b/arch/x86/kernel/cpu/mce/internal.h
index 35b3e5c02c1c..5215dcd01614 100644
--- a/arch/x86/kernel/cpu/mce/internal.h
+++ b/arch/x86/kernel/cpu/mce/internal.h
@@ -118,7 +118,6 @@ struct mca_config {
 	      bios_cmci_threshold	: 1,
 	      __reserved		: 59;
 
-	u8 banks;
 	s8 bootlog;
 	int tolerant;
 	int monarch_timeout;
@@ -127,6 +126,7 @@ struct mca_config {
 };
 
 extern struct mca_config mca_cfg;
+DECLARE_PER_CPU_READ_MOSTLY(u8, mce_num_banks);
 
 struct mce_vendor_flags {
 	/*
-- 
2.17.1

Re: [PATCH v3 4/6] x86/MCE: Make number of MCA banks per_cpu

[Borislav Petkov]

[-- Attachment #1: Type: text/plain, Size: 3312 bytes --]

On Tue, Apr 30, 2019 at 08:32:20PM +0000, Ghannam, Yazen wrote:
> From: Yazen Ghannam <yazen.ghannam@amd.com>
> 
> The number of MCA banks is provided per logical CPU. Historically, this
> number has been the same across all CPUs, but this is not an
> architectural guarantee. Future AMD systems may have MCA bank counts
> that vary between logical CPUs in a system.
> 
> This issue was partially addressed in
> 
> 006c077041dc ("x86/mce: Handle varying MCA bank counts")
> 
> by allocating structures using the maximum number of MCA banks and by
> saving the maximum MCA bank count in a system as the global count. This
> means that some extra structures are allocated. Also, this means that
> CPUs will spend more time in the #MC and other handlers checking extra
> MCA banks.

...

> @@ -1480,14 +1482,15 @@ EXPORT_SYMBOL_GPL(mce_notify_irq);
>  
>  static int __mcheck_cpu_mce_banks_init(void)
>  {
> +	u8 n_banks = this_cpu_read(mce_num_banks);
>  	struct mce_bank *mce_banks;
>  	int i;
>  
> -	mce_banks = kcalloc(MAX_NR_BANKS, sizeof(struct mce_bank), GFP_KERNEL);
> +	mce_banks = kcalloc(n_banks, sizeof(struct mce_bank), GFP_KERNEL);

Something changed in mm land or maybe we were lucky and got away with an
atomic GFP_KERNEL allocation until now but:

[    2.447838] smp: Bringing up secondary CPUs ...
[    2.456895] x86: Booting SMP configuration:
[    2.457822] .... node  #0, CPUs:        #1
[    1.344284] BUG: sleeping function called from invalid context at mm/slab.h:418
[    1.344284] in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
[    1.344284] no locks held by swapper/1/0.
[    1.344284] irq event stamp: 0
[    1.344284] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[    1.344284] hardirqs last disabled at (0): [<ffffffff8106bd36>] copy_process.part.59+0x676/0x1b60
[    1.344284] softirqs last  enabled at (0): [<ffffffff8106bd36>] copy_process.part.59+0x676/0x1b60
[    1.344284] softirqs last disabled at (0): [<0000000000000000>] 0x0
[    1.344284] Preemption disabled at:
[    1.344284] [<ffffffff81042a60>] start_secondary+0x50/0x170
[    1.344284] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.1.0+ #1
[    1.344284] Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A13 05/11/2014
[    1.344284] Call Trace:
[    1.344284]  dump_stack+0x67/0x9b
[    1.344284]  ___might_sleep+0x16c/0x250
[    1.344284]  __kmalloc+0x182/0x280
[    1.344284]  mcheck_cpu_init+0x1d9/0x430
[    1.344284]  identify_cpu+0x3e5/0x720
[    1.344284]  identify_secondary_cpu+0x13/0x80
[    1.344284]  smp_store_cpu_info+0x48/0x60
[    1.344284]  start_secondary+0x63/0x170
[    1.344284]  ? set_cpu_sibling_map+0x500/0x500
[    1.344284]  secondary_startup_64+0xa4/0xb0
[    2.587866]   #2  #3  #4
[    2.609287] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    2.618875]   #5  #6  #7
[    2.638092] smp: Brought up 1 node, 8 CPUs
[    2.639814] smpboot: Max logical packages: 4
[    2.640830] smpboot: Total of 8 processors activated (57466.51 BogoMIPS)

.config is attached and branch is at

https://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git/log/?h=rc0%2b3-ras

Thx.

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 119027 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.1.0 Kernel Configuration
#

#
# Compiler: gcc (Debian 7.3.0-1) 7.3.0
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70300
CONFIG_CLANG_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_FORCE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS_PROC is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=18
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_MEMBARRIER is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
# CONFIG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_NUMACHIP=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_UV is not set
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_HYGON is not set
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=256
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
CONFIG_PERF_EVENTS_AMD_POWER=m
# CONFIG_X86_VSYSCALL_EMULATION is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_X86_PMEM_LEGACY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_UMIP is not set
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_HAVE_LIVEPATCH=y
# CONFIG_LIVEPATCH is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sdb5"
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_SPCR_TABLE is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_TAD is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_TABLE_UPGRADE is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=m
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
CONFIG_X86_X32=y
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_HAVE_GENERIC_GUP=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=m
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=m
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_EARLYCON=y

#
# Tegra firmware driver
#
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_CMDLINE_PARSER=y
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_ZONE_DEVICE=y
CONFIG_ARCH_HAS_HMM_MIRROR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_INGRESS is not set
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NETFILTER_NETLINK_OSF is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=y
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_SET is not set
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
CONFIG_NFT_COUNTER=m
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_OBJREF is not set
CONFIG_NFT_QUEUE=m
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
# CONFIG_NETFILTER_XT_CONNMARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ECN=m
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_L2TP=m
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_TABLES_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_TABLES_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_DEFRAG_IPV6=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_FAILOVER=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_BW is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#

#
# Cadence PCIe controllers support
#
# CONFIG_VMD is not set

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_PVPANIC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_VENDOR_CADENCE is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_CAVIUM_PTP is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
# CONFIG_NET_VENDOR_NETERION is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
# CONFIG_NET_VENDOR_NI is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_MDIO_DEVICE is not set
# CONFIG_PHYLIB is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MSM_VIBRATOR is not set
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_NULL_TTY is not set
CONFIG_LDISC_AUTOLOAD=y
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=m
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_CPU is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DELL_SMM=m
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_EBC_C384_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#

#
# Customise DVB Frontends
#

#
# Tools to develop new frontends
#

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=y
CONFIG_DRM_VM=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set

#
# ARM devices
#
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
CONFIG_DRM_ATI_PCIGART=y
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_VBOXVIDEO is not set
CONFIG_DRM_LEGACY=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SND_X86 is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_HID_LOGITECH_HIDPP is not set
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=m
# CONFIG_TYPEC_TCPM is not set
# CONFIG_TYPEC_UCSI is not set
# CONFIG_TYPEC_TPS6598X is not set

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_PI3USB30532 is not set

#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_CQHCI is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_APU is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=m
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
CONFIG_EDAC_I10NM=m
CONFIG_EDAC_PND2=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
# CONFIG_VIRTIO_PCI_LEGACY is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ACERHDF is not set
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DCDBAS=m
# CONFIG_DELL_SMBIOS is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_DELL_WMI_LED is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBU is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_HP_WMI is not set
# CONFIG_LG_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=y
CONFIG_WMI_BMOF=y
# CONFIG_INTEL_WMI_THUNDERBOLT is not set
# CONFIG_MSI_WMI is not set
# CONFIG_PEAQ_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
# CONFIG_I2C_MULTI_INSTANTIATE is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_HUAWEI_WMI is not set
# CONFIG_PCENGINES_APU2 is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#

#
# NXP/Freescale QorIQ SoC drivers
#

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
CONFIG_RAS_CEC=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=m
# CONFIG_DEV_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_EFIVAR_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
# CONFIG_9P_FS_POSIX_ACL is not set
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
# CONFIG_UNICODE is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_INTEL_TXT is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m

#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECRDSA is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128L is not set
# CONFIG_CRYPTO_AEGIS256 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set
# CONFIG_CRYPTO_MORUS640 is not set
# CONFIG_CRYPTO_MORUS640_SSE2 is not set
# CONFIG_CRYPTO_MORUS1280 is not set
# CONFIG_CRYPTO_MORUS1280_SSE2 is not set
# CONFIG_CRYPTO_MORUS1280_AVX2 is not set
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_DES3_EDE_X86_64=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_SM4=m
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CORDIC is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_BTF is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_CC_HAS_KASAN_GENERIC=y
# CONFIG_KASAN is not set
CONFIG_KASAN_STACK=1
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_MEMTEST=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_UBSAN_ALIGNMENT=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=m
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# CONFIG_UNWINDER_GUESS is not set

RE: [PATCH v3 4/6] x86/MCE: Make number of MCA banks per_cpu

[Ghannam, Yazen]

> -----Original Message-----
> From: Borislav Petkov <bp@alien8.de>
> Sent: Saturday, May 18, 2019 6:26 AM
> To: Ghannam, Yazen <Yazen.Ghannam@amd.com>
> Cc: linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; bp@suse.de; tony.luck@intel.com; x86@kernel.org
> Subject: Re: [PATCH v3 4/6] x86/MCE: Make number of MCA banks per_cpu
> 
> 
> On Tue, Apr 30, 2019 at 08:32:20PM +0000, Ghannam, Yazen wrote:
> > From: Yazen Ghannam <yazen.ghannam@amd.com>
> >
> > The number of MCA banks is provided per logical CPU. Historically, this
> > number has been the same across all CPUs, but this is not an
> > architectural guarantee. Future AMD systems may have MCA bank counts
> > that vary between logical CPUs in a system.
> >
> > This issue was partially addressed in
> >
> > 006c077041dc ("x86/mce: Handle varying MCA bank counts")
> >
> > by allocating structures using the maximum number of MCA banks and by
> > saving the maximum MCA bank count in a system as the global count. This
> > means that some extra structures are allocated. Also, this means that
> > CPUs will spend more time in the #MC and other handlers checking extra
> > MCA banks.
> 
> ...
> 
> > @@ -1480,14 +1482,15 @@ EXPORT_SYMBOL_GPL(mce_notify_irq);
> >
> >  static int __mcheck_cpu_mce_banks_init(void)
> >  {
> > +     u8 n_banks = this_cpu_read(mce_num_banks);
> >       struct mce_bank *mce_banks;
> >       int i;
> >
> > -     mce_banks = kcalloc(MAX_NR_BANKS, sizeof(struct mce_bank), GFP_KERNEL);
> > +     mce_banks = kcalloc(n_banks, sizeof(struct mce_bank), GFP_KERNEL);
> 
> Something changed in mm land or maybe we were lucky and got away with an
> atomic GFP_KERNEL allocation until now but:
> 
> [    2.447838] smp: Bringing up secondary CPUs ...
> [    2.456895] x86: Booting SMP configuration:
> [    2.457822] .... node  #0, CPUs:        #1

The issue seems to be that the allocation is now happening on CPUs other than CPU0.

Patch 2 in this set has the same issue. I didn't see it until I turned on the "Lock Debugging" config options.

> [    1.344284] BUG: sleeping function called from invalid context at mm/slab.h:418

This message comes from ___might_sleep() which checks the system_state.

On CPU0, system_state=SYSTEM_BOOTING.

On every other CPU, system_state=SYSTEM_SCHEDULING, and that's the only system_state where the message is shown.

Changing GFP_KERNEL to GFP_ATOMIC seems to be a fix. Is this appropriate? Or do you think there's something else we could try?

Thanks,
Yazen

Re: [PATCH v3 4/6] x86/MCE: Make number of MCA banks per_cpu

[Borislav Petkov]

On Tue, May 21, 2019 at 05:52:42PM +0000, Ghannam, Yazen wrote:
> This message comes from ___might_sleep() which checks the
> system_state.
>
> On CPU0, system_state=SYSTEM_BOOTING.
>
> On every other CPU, system_state=SYSTEM_SCHEDULING, and that's the
> only system_state where the message is shown.

Right, the check in ___might_sleep().

> Changing GFP_KERNEL to GFP_ATOMIC seems to be a fix. Is this
> appropriate? Or do you think there's something else we could try?

From: Documentation/core-api/memory-allocation.rst

  * If you think that accessing memory reserves is justified and the kernel
    will be stressed unless allocation succeeds, you may use ``GFP_ATOMIC``.


I don't think the MCA banks representation justifies accessing memory
reserves.

Can we do instead:

-static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank *, mce_banks_array);
+static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank, mce_banks_array[MAX_NR_BANKS]);

which should be something like 9*32 = 288 bytes per CPU.

Unless you have a better idea...

Thx.

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply. Srsly.

Re: [PATCH v3 4/6] x86/MCE: Make number of MCA banks per_cpu

[Luck, Tony]

On Tue, May 21, 2019 at 10:29:02PM +0200, Borislav Petkov wrote:
> 
> Can we do instead:
> 
> -static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank *, mce_banks_array);
> +static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank, mce_banks_array[MAX_NR_BANKS]);
> 
> which should be something like 9*32 = 288 bytes per CPU.
> 

Where did you get the "9" from?  struct mce_bank looks to
be over 50 bytes.

Still only 1.5K per cpu though.

-Tony

Re: [PATCH v3 4/6] x86/MCE: Make number of MCA banks per_cpu

[Borislav Petkov]

On Tue, May 21, 2019 at 01:42:40PM -0700, Luck, Tony wrote:
> On Tue, May 21, 2019 at 10:29:02PM +0200, Borislav Petkov wrote:
> > 
> > Can we do instead:
> > 
> > -static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank *, mce_banks_array);
> > +static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank, mce_banks_array[MAX_NR_BANKS]);
> > 
> > which should be something like 9*32 = 288 bytes per CPU.
> > 
> 
> Where did you get the "9" from?  struct mce_bank looks to
> be over 50 bytes.

Patch 2/6 changes that:

 struct mce_bank {
        u64                     ctl;                    /* subevents to enable */
        bool                    init;                   /* initialise bank? */
+};
+static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank *, mce_banks_percpu);
+
+#define ATTR_LEN               16
+/* One object for each MCE bank, shared by all CPUs */
+struct mce_bank_dev {
        struct device_attribute attr;                   /* device attribute */
        char                    attrname[ATTR_LEN];     /* attribute name */
+       u8                      bank;                   /* bank number */
 };
+static struct mce_bank_dev mce_bank_devs[MAX_NR_BANKS];

> Still only 1.5K per cpu though.

Yah, I think that using static per-CPU memory should be better than
GFP_ATOMIC.

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply. Srsly.

RE: [PATCH v3 4/6] x86/MCE: Make number of MCA banks per_cpu

[Ghannam, Yazen]

> -----Original Message-----
> From: linux-edac-owner@vger.kernel.org <linux-edac-owner@vger.kernel.org> On Behalf Of Borislav Petkov
> Sent: Tuesday, May 21, 2019 6:09 PM
> To: Luck, Tony <tony.luck@intel.com>
> Cc: Ghannam, Yazen <Yazen.Ghannam@amd.com>; linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; x86@kernel.org
> Subject: Re: [PATCH v3 4/6] x86/MCE: Make number of MCA banks per_cpu
> 
> 
> On Tue, May 21, 2019 at 01:42:40PM -0700, Luck, Tony wrote:
> > On Tue, May 21, 2019 at 10:29:02PM +0200, Borislav Petkov wrote:
> > >
> > > Can we do instead:
> > >
> > > -static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank *, mce_banks_array);
> > > +static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank, mce_banks_array[MAX_NR_BANKS]);
> > >
> > > which should be something like 9*32 = 288 bytes per CPU.
> > >
> >
> > Where did you get the "9" from?  struct mce_bank looks to
> > be over 50 bytes.
> 
> Patch 2/6 changes that:
> 
>  struct mce_bank {
>         u64                     ctl;                    /* subevents to enable */
>         bool                    init;                   /* initialise bank? */
> +};
> +static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank *, mce_banks_percpu);
> +
> +#define ATTR_LEN               16
> +/* One object for each MCE bank, shared by all CPUs */
> +struct mce_bank_dev {
>         struct device_attribute attr;                   /* device attribute */
>         char                    attrname[ATTR_LEN];     /* attribute name */
> +       u8                      bank;                   /* bank number */
>  };
> +static struct mce_bank_dev mce_bank_devs[MAX_NR_BANKS];
> 
> > Still only 1.5K per cpu though.
> 
> Yah, I think that using static per-CPU memory should be better than
> GFP_ATOMIC.
> 

Okay, makes sense. I'll send a patch soon.

Thanks,
Yazen

[v3,6/6] x86/MCE: Treat MCE bank as initialized if control bits set in hardware

[Yazen Ghannam]

From: Yazen Ghannam <yazen.ghannam@amd.com>

The OS is expected to write all bits to MCA_CTL for each bank. However,
some banks may be unused in which case the registers for such banks are
Read-as-Zero/Writes-Ignored. Also, the OS may not write any control bits
because of quirks, etc.

A bank can be considered uninitialized if the MCA_CTL register returns
zero. This is because either the OS did not write anything or because
the hardware is enforcing RAZ/WI for the bank.

Set a bank's init value based on if the control bits are set or not in
hardware.

Return an error code in the sysfs interface for uninitialized banks.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-7-Yazen.Ghannam@amd.com

v2->v3:
* No change.

v1->v2:
* New in v2.
* Based on discussion from v1 patch 2.

 arch/x86/kernel/cpu/mce/core.c | 9 +++++++++
 1 file changed, 9 insertions(+)

-- 
2.17.1

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 551366c155ef..e59947e10ee0 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1574,6 +1574,9 @@ static void __mcheck_cpu_init_clear_banks(void)
 
 		/* Save bits set in hardware. */
 		rdmsrl(msr_ops.ctl(i), b->ctl);
+
+		/* Bank is initialized if bits are set in hardware. */
+		b->init = !!b->ctl;
 	}
 }
 
@@ -2098,6 +2101,9 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_percpu, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	return sprintf(buf, "%llx\n", b->ctl);
 }
 
@@ -2116,6 +2122,9 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_percpu, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	b->ctl = new;
 	mce_restart();
 

[PATCH v3 6/6] x86/MCE: Treat MCE bank as initialized if control bits set in hardware

[Ghannam, Yazen]

From: Yazen Ghannam <yazen.ghannam@amd.com>

The OS is expected to write all bits to MCA_CTL for each bank. However,
some banks may be unused in which case the registers for such banks are
Read-as-Zero/Writes-Ignored. Also, the OS may not write any control bits
because of quirks, etc.

A bank can be considered uninitialized if the MCA_CTL register returns
zero. This is because either the OS did not write anything or because
the hardware is enforcing RAZ/WI for the bank.

Set a bank's init value based on if the control bits are set or not in
hardware.

Return an error code in the sysfs interface for uninitialized banks.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-7-Yazen.Ghannam@amd.com

v2->v3:
* No change.

v1->v2:
* New in v2.
* Based on discussion from v1 patch 2.

 arch/x86/kernel/cpu/mce/core.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 551366c155ef..e59947e10ee0 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1574,6 +1574,9 @@ static void __mcheck_cpu_init_clear_banks(void)
 
 		/* Save bits set in hardware. */
 		rdmsrl(msr_ops.ctl(i), b->ctl);
+
+		/* Bank is initialized if bits are set in hardware. */
+		b->init = !!b->ctl;
 	}
 }
 
@@ -2098,6 +2101,9 @@ static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_percpu, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	return sprintf(buf, "%llx\n", b->ctl);
 }
 
@@ -2116,6 +2122,9 @@ static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 
 	b = &per_cpu(mce_banks_percpu, s->id)[bank];
 
+	if (!b->init)
+		return -ENODEV;
+
 	b->ctl = new;
 	mce_restart();
 
-- 
2.17.1

[v3,3/6] x86/MCE/AMD: Don't cache block addresses on SMCA systems

[Yazen Ghannam]

From: Yazen Ghannam <yazen.ghannam@amd.com>

On legacy systems, the addresses of the MCA_MISC* registers need to be
recursively discovered based on a Block Pointer field in the registers.

On Scalable MCA systems, the register space is fixed, and particular
addresses can be derived by regular offsets for bank and register type.
This fixed address space includes the MCA_MISC* registers.

MCA_MISC0 is always available for each MCA bank. MCA_MISC1 through
MCA_MISC4 are considered available if MCA_MISC0[BlkPtr]=1.

Cache the value of MCA_MISC0[BlkPtr] for each bank and per CPU. This
needs to be done only during init. The values should be saved per CPU
to accommodate heterogeneous SMCA systems.

Redo smca_get_block_address() to directly return the block addresses.
Use the cached Block Pointer value to decide if the MCA_MISC1-4
addresses should be returned.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-4-Yazen.Ghannam@amd.com

v2->v3:
* Change name of new map variable to "smca_misc_banks_map".
* Use "BIT()" where appropriate.

v1->v2:
* No change.

 arch/x86/kernel/cpu/mce/amd.c | 73 ++++++++++++++++++-----------------
 1 file changed, 37 insertions(+), 36 deletions(-)

-- 
2.17.1

diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index d904aafe6409..d4d6e4b7f9dc 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -101,11 +101,6 @@ static struct smca_bank_name smca_names[] = {
 	[SMCA_PCIE]	= { "pcie",		"PCI Express Unit" },
 };
 
-static u32 smca_bank_addrs[MAX_NR_BANKS][NR_BLOCKS] __ro_after_init =
-{
-	[0 ... MAX_NR_BANKS - 1] = { [0 ... NR_BLOCKS - 1] = -1 }
-};
-
 static const char *smca_get_name(enum smca_bank_types t)
 {
 	if (t >= N_SMCA_BANK_TYPES)
@@ -199,6 +194,9 @@ static char buf_mcatype[MAX_MCATYPE_NAME_LEN];
 static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
 static DEFINE_PER_CPU(unsigned int, bank_map);	/* see which banks are on */
 
+/* Map of banks that have more than MCA_MISC0 available. */
+static DEFINE_PER_CPU(u32, smca_misc_banks_map);
+
 static void amd_threshold_interrupt(void);
 static void amd_deferred_error_interrupt(void);
 
@@ -208,6 +206,28 @@ static void default_deferred_error_interrupt(void)
 }
 void (*deferred_error_int_vector)(void) = default_deferred_error_interrupt;
 
+static void smca_set_misc_banks_map(unsigned int bank, unsigned int cpu)
+{
+	u32 low, high;
+
+	/*
+	 * For SMCA enabled processors, BLKPTR field of the first MISC register
+	 * (MCx_MISC0) indicates presence of additional MISC regs set (MISC1-4).
+	 */
+	if (rdmsr_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
+		return;
+
+	if (!(low & MCI_CONFIG_MCAX))
+		return;
+
+	if (rdmsr_safe(MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high))
+		return;
+
+	if (low & MASK_BLKPTR_LO)
+		per_cpu(smca_misc_banks_map, cpu) |= BIT(bank);
+
+}
+
 static void smca_configure(unsigned int bank, unsigned int cpu)
 {
 	unsigned int i, hwid_mcatype;
@@ -245,6 +265,8 @@ static void smca_configure(unsigned int bank, unsigned int cpu)
 		wrmsr(smca_config, low, high);
 	}
 
+	smca_set_misc_banks_map(bank, cpu);
+
 	/* Return early if this bank was already initialized. */
 	if (smca_banks[bank].hwid)
 		return;
@@ -455,42 +477,21 @@ static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c)
 	wrmsr(MSR_CU_DEF_ERR, low, high);
 }
 
-static u32 smca_get_block_address(unsigned int bank, unsigned int block)
+static u32 smca_get_block_address(unsigned int bank, unsigned int block,
+				  unsigned int cpu)
 {
-	u32 low, high;
-	u32 addr = 0;
-
-	if (smca_get_bank_type(bank) == SMCA_RESERVED)
-		return addr;
-
 	if (!block)
 		return MSR_AMD64_SMCA_MCx_MISC(bank);
 
-	/* Check our cache first: */
-	if (smca_bank_addrs[bank][block] != -1)
-		return smca_bank_addrs[bank][block];
-
-	/*
-	 * For SMCA enabled processors, BLKPTR field of the first MISC register
-	 * (MCx_MISC0) indicates presence of additional MISC regs set (MISC1-4).
-	 */
-	if (rdmsr_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
-		goto out;
-
-	if (!(low & MCI_CONFIG_MCAX))
-		goto out;
-
-	if (!rdmsr_safe(MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high) &&
-	    (low & MASK_BLKPTR_LO))
-		addr = MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
+	if (!(per_cpu(smca_misc_banks_map, cpu) & BIT(bank)))
+		return 0;
 
-out:
-	smca_bank_addrs[bank][block] = addr;
-	return addr;
+	return MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
 }
 
 static u32 get_block_address(u32 current_addr, u32 low, u32 high,
-			     unsigned int bank, unsigned int block)
+			     unsigned int bank, unsigned int block,
+			     unsigned int cpu)
 {
 	u32 addr = 0, offset = 0;
 
@@ -498,7 +499,7 @@ static u32 get_block_address(u32 current_addr, u32 low, u32 high,
 		return addr;
 
 	if (mce_flags.smca)
-		return smca_get_block_address(bank, block);
+		return smca_get_block_address(bank, block, cpu);
 
 	/* Fall back to method we used for older processors: */
 	switch (block) {
@@ -637,7 +638,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 		disable_err_thresholding(c, bank);
 
 		for (block = 0; block < NR_BLOCKS; ++block) {
-			address = get_block_address(address, low, high, bank, block);
+			address = get_block_address(address, low, high, bank, block, cpu);
 			if (!address)
 				break;
 
@@ -1254,7 +1255,7 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
 	if (err)
 		goto out_free;
 recurse:
-	address = get_block_address(address, low, high, bank, ++block);
+	address = get_block_address(address, low, high, bank, ++block, cpu);
 	if (!address)
 		return 0;
 

[PATCH v3 3/6] x86/MCE/AMD: Don't cache block addresses on SMCA systems

[Ghannam, Yazen]

From: Yazen Ghannam <yazen.ghannam@amd.com>

On legacy systems, the addresses of the MCA_MISC* registers need to be
recursively discovered based on a Block Pointer field in the registers.

On Scalable MCA systems, the register space is fixed, and particular
addresses can be derived by regular offsets for bank and register type.
This fixed address space includes the MCA_MISC* registers.

MCA_MISC0 is always available for each MCA bank. MCA_MISC1 through
MCA_MISC4 are considered available if MCA_MISC0[BlkPtr]=1.

Cache the value of MCA_MISC0[BlkPtr] for each bank and per CPU. This
needs to be done only during init. The values should be saved per CPU
to accommodate heterogeneous SMCA systems.

Redo smca_get_block_address() to directly return the block addresses.
Use the cached Block Pointer value to decide if the MCA_MISC1-4
addresses should be returned.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-4-Yazen.Ghannam@amd.com

v2->v3:
* Change name of new map variable to "smca_misc_banks_map".
* Use "BIT()" where appropriate.

v1->v2:
* No change.

 arch/x86/kernel/cpu/mce/amd.c | 73 ++++++++++++++++++-----------------
 1 file changed, 37 insertions(+), 36 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index d904aafe6409..d4d6e4b7f9dc 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -101,11 +101,6 @@ static struct smca_bank_name smca_names[] = {
 	[SMCA_PCIE]	= { "pcie",		"PCI Express Unit" },
 };
 
-static u32 smca_bank_addrs[MAX_NR_BANKS][NR_BLOCKS] __ro_after_init =
-{
-	[0 ... MAX_NR_BANKS - 1] = { [0 ... NR_BLOCKS - 1] = -1 }
-};
-
 static const char *smca_get_name(enum smca_bank_types t)
 {
 	if (t >= N_SMCA_BANK_TYPES)
@@ -199,6 +194,9 @@ static char buf_mcatype[MAX_MCATYPE_NAME_LEN];
 static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
 static DEFINE_PER_CPU(unsigned int, bank_map);	/* see which banks are on */
 
+/* Map of banks that have more than MCA_MISC0 available. */
+static DEFINE_PER_CPU(u32, smca_misc_banks_map);
+
 static void amd_threshold_interrupt(void);
 static void amd_deferred_error_interrupt(void);
 
@@ -208,6 +206,28 @@ static void default_deferred_error_interrupt(void)
 }
 void (*deferred_error_int_vector)(void) = default_deferred_error_interrupt;
 
+static void smca_set_misc_banks_map(unsigned int bank, unsigned int cpu)
+{
+	u32 low, high;
+
+	/*
+	 * For SMCA enabled processors, BLKPTR field of the first MISC register
+	 * (MCx_MISC0) indicates presence of additional MISC regs set (MISC1-4).
+	 */
+	if (rdmsr_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
+		return;
+
+	if (!(low & MCI_CONFIG_MCAX))
+		return;
+
+	if (rdmsr_safe(MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high))
+		return;
+
+	if (low & MASK_BLKPTR_LO)
+		per_cpu(smca_misc_banks_map, cpu) |= BIT(bank);
+
+}
+
 static void smca_configure(unsigned int bank, unsigned int cpu)
 {
 	unsigned int i, hwid_mcatype;
@@ -245,6 +265,8 @@ static void smca_configure(unsigned int bank, unsigned int cpu)
 		wrmsr(smca_config, low, high);
 	}
 
+	smca_set_misc_banks_map(bank, cpu);
+
 	/* Return early if this bank was already initialized. */
 	if (smca_banks[bank].hwid)
 		return;
@@ -455,42 +477,21 @@ static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c)
 	wrmsr(MSR_CU_DEF_ERR, low, high);
 }
 
-static u32 smca_get_block_address(unsigned int bank, unsigned int block)
+static u32 smca_get_block_address(unsigned int bank, unsigned int block,
+				  unsigned int cpu)
 {
-	u32 low, high;
-	u32 addr = 0;
-
-	if (smca_get_bank_type(bank) == SMCA_RESERVED)
-		return addr;
-
 	if (!block)
 		return MSR_AMD64_SMCA_MCx_MISC(bank);
 
-	/* Check our cache first: */
-	if (smca_bank_addrs[bank][block] != -1)
-		return smca_bank_addrs[bank][block];
-
-	/*
-	 * For SMCA enabled processors, BLKPTR field of the first MISC register
-	 * (MCx_MISC0) indicates presence of additional MISC regs set (MISC1-4).
-	 */
-	if (rdmsr_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
-		goto out;
-
-	if (!(low & MCI_CONFIG_MCAX))
-		goto out;
-
-	if (!rdmsr_safe(MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high) &&
-	    (low & MASK_BLKPTR_LO))
-		addr = MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
+	if (!(per_cpu(smca_misc_banks_map, cpu) & BIT(bank)))
+		return 0;
 
-out:
-	smca_bank_addrs[bank][block] = addr;
-	return addr;
+	return MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
 }
 
 static u32 get_block_address(u32 current_addr, u32 low, u32 high,
-			     unsigned int bank, unsigned int block)
+			     unsigned int bank, unsigned int block,
+			     unsigned int cpu)
 {
 	u32 addr = 0, offset = 0;
 
@@ -498,7 +499,7 @@ static u32 get_block_address(u32 current_addr, u32 low, u32 high,
 		return addr;
 
 	if (mce_flags.smca)
-		return smca_get_block_address(bank, block);
+		return smca_get_block_address(bank, block, cpu);
 
 	/* Fall back to method we used for older processors: */
 	switch (block) {
@@ -637,7 +638,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 		disable_err_thresholding(c, bank);
 
 		for (block = 0; block < NR_BLOCKS; ++block) {
-			address = get_block_address(address, low, high, bank, block);
+			address = get_block_address(address, low, high, bank, block, cpu);
 			if (!address)
 				break;
 
@@ -1254,7 +1255,7 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
 	if (err)
 		goto out_free;
 recurse:
-	address = get_block_address(address, low, high, bank, ++block);
+	address = get_block_address(address, low, high, bank, ++block, cpu);
 	if (!address)
 		return 0;
 
-- 
2.17.1

[v3,2/6] x86/MCE: Handle MCA controls in a per_cpu way

[Yazen Ghannam]

From: Yazen Ghannam <yazen.ghannam@amd.com>

Current AMD systems have unique MCA banks per logical CPU even though
the type of the banks may all align to the same bank number. Each CPU
will have control of a set of MCA banks in the hardware and these are
not shared with other CPUs.

For example, bank 0 may be the Load-Store Unit on every logical CPU, but
each bank 0 is a unique structure in the hardware. In other words, there
isn't a *single* Load-Store Unit at MCA bank 0 that all logical CPUs
share.

This idea extends even to non-core MCA banks. For example, CPU0 and CPU4
may see a Unified Memory Controller at bank 15, but each CPU is actually
seeing a unique hardware structure that is not shared with other CPUs.

Because the MCA banks are all unique hardware structures, it would be
good to control them in a more granular way. For example, if there is a
known issue with the Floating Point Unit on CPU5 and a user wishes to
disable an error type on the Floating Point Unit, then it would be good
to do this only for CPU5 rather than all CPUs.

Also, future AMD systems may have heterogeneous MCA banks. Meaning the
bank numbers may not necessarily represent the same types between CPUs.
For example, bank 20 visible to CPU0 may be a Unified Memory Controller
and bank 20 visible to CPU4 may be a Coherent Slave. So granular control
will be even more necessary should the user wish to control specific MCA
banks.

Split the device attributes from struct mce_bank leaving only the MCA
bank control fields.

Make struct mce_banks[] per_cpu in order to have more granular control
over individual MCA banks in the hardware.

Allocate the device attributes statically based on the maximum number of
MCA banks supported. The sysfs interface will use as many as needed per
CPU. Currently, this is set to mca_cfg.banks, but will be changed to a
per_cpu bank count in a future patch.

Allocate the MCA control bits dynamically. Use the maximum number of MCA
banks supported for now. This will be changed to a per_cpu bank count in
a future patch.

Redo the sysfs store/show functions to handle the per_cpu mce_banks[].

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-3-Yazen.Ghannam@amd.com

v2->v3:
* Keep old member alignment in struct mce_bank.
* Change "cpu" to "CPU" in modified comment.
* Use a local array pointer when doing multiple per_cpu accesses.

v1->v2:
* Change "struct mce_bank*" to "struct mce_bank *" in definition.

 arch/x86/kernel/cpu/mce/core.c | 59 ++++++++++++++++++++++++++--------
 1 file changed, 45 insertions(+), 14 deletions(-)

-- 
2.17.1

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index ba5767dd5538..66347bdc8b08 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -64,16 +64,21 @@ static DEFINE_MUTEX(mce_sysfs_mutex);
 
 DEFINE_PER_CPU(unsigned, mce_exception_count);
 
-#define ATTR_LEN               16
-/* One object for each MCE bank, shared by all CPUs */
 struct mce_bank {
 	u64			ctl;			/* subevents to enable */
 	bool			init;			/* initialise bank? */
+};
+static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank *, mce_banks_percpu);
+
+#define ATTR_LEN               16
+/* One object for each MCE bank, shared by all CPUs */
+struct mce_bank_dev {
 	struct device_attribute	attr;			/* device attribute */
 	char			attrname[ATTR_LEN];	/* attribute name */
+	u8			bank;			/* bank number */
 };
+static struct mce_bank_dev mce_bank_devs[MAX_NR_BANKS];
 
-static struct mce_bank *mce_banks __read_mostly;
 struct mce_vendor_flags mce_flags __read_mostly;
 
 struct mca_config mca_cfg __read_mostly = {
@@ -683,6 +688,7 @@ DEFINE_PER_CPU(unsigned, mce_poll_count);
  */
 bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	bool error_seen = false;
 	struct mce m;
 	int i;
@@ -1130,6 +1136,7 @@ static void __mc_scan_banks(struct mce *m, struct mce *final,
 			    unsigned long *toclear, unsigned long *valid_banks,
 			    int no_way_out, int *worst)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	struct mca_config *cfg = &mca_cfg;
 	int severity, i;
 
@@ -1473,6 +1480,7 @@ EXPORT_SYMBOL_GPL(mce_notify_irq);
 
 static int __mcheck_cpu_mce_banks_init(void)
 {
+	struct mce_bank *mce_banks;
 	int i;
 
 	mce_banks = kcalloc(MAX_NR_BANKS, sizeof(struct mce_bank), GFP_KERNEL);
@@ -1485,6 +1493,8 @@ static int __mcheck_cpu_mce_banks_init(void)
 		b->ctl = -1ULL;
 		b->init = 1;
 	}
+
+	per_cpu(mce_banks_percpu, smp_processor_id()) = mce_banks;
 	return 0;
 }
 
@@ -1504,7 +1514,7 @@ static int __mcheck_cpu_cap_init(void)
 
 	mca_cfg.banks = max(mca_cfg.banks, b);
 
-	if (!mce_banks) {
+	if (!this_cpu_read(mce_banks_percpu)) {
 		int err = __mcheck_cpu_mce_banks_init();
 		if (err)
 			return err;
@@ -1544,6 +1554,7 @@ static void __mcheck_cpu_init_generic(void)
 
 static void __mcheck_cpu_init_clear_banks(void)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	int i;
 
 	for (i = 0; i < mca_cfg.banks; i++) {
@@ -1587,6 +1598,7 @@ static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs)
 /* Add per CPU specific workarounds here */
 static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	struct mca_config *cfg = &mca_cfg;
 
 	if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
@@ -1957,6 +1969,7 @@ int __init mcheck_init(void)
  */
 static void mce_disable_error_reporting(void)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	int i;
 
 	for (i = 0; i < mca_cfg.banks; i++) {
@@ -2059,26 +2072,41 @@ static struct bus_type mce_subsys = {
 
 DEFINE_PER_CPU(struct device *, mce_device);
 
-static inline struct mce_bank *attr_to_bank(struct device_attribute *attr)
+static inline struct mce_bank_dev *attr_to_bank(struct device_attribute *attr)
 {
-	return container_of(attr, struct mce_bank, attr);
+	return container_of(attr, struct mce_bank_dev, attr);
 }
 
 static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 			 char *buf)
 {
-	return sprintf(buf, "%llx\n", attr_to_bank(attr)->ctl);
+	u8 bank = attr_to_bank(attr)->bank;
+	struct mce_bank *b;
+
+	if (bank >= mca_cfg.banks)
+		return -EINVAL;
+
+	b = &per_cpu(mce_banks_percpu, s->id)[bank];
+
+	return sprintf(buf, "%llx\n", b->ctl);
 }
 
 static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 			const char *buf, size_t size)
 {
+	u8 bank = attr_to_bank(attr)->bank;
+	struct mce_bank *b;
 	u64 new;
 
 	if (kstrtou64(buf, 0, &new) < 0)
 		return -EINVAL;
 
-	attr_to_bank(attr)->ctl = new;
+	if (bank >= mca_cfg.banks)
+		return -EINVAL;
+
+	b = &per_cpu(mce_banks_percpu, s->id)[bank];
+
+	b->ctl = new;
 	mce_restart();
 
 	return size;
@@ -2193,7 +2221,7 @@ static void mce_device_release(struct device *dev)
 	kfree(dev);
 }
 
-/* Per cpu device init. All of the cpus still share the same ctrl bank: */
+/* Per CPU device init. All of the CPUs still share the same bank device: */
 static int mce_device_create(unsigned int cpu)
 {
 	struct device *dev;
@@ -2226,7 +2254,7 @@ static int mce_device_create(unsigned int cpu)
 			goto error;
 	}
 	for (j = 0; j < mca_cfg.banks; j++) {
-		err = device_create_file(dev, &mce_banks[j].attr);
+		err = device_create_file(dev, &mce_bank_devs[j].attr);
 		if (err)
 			goto error2;
 	}
@@ -2236,7 +2264,7 @@ static int mce_device_create(unsigned int cpu)
 	return 0;
 error2:
 	while (--j >= 0)
-		device_remove_file(dev, &mce_banks[j].attr);
+		device_remove_file(dev, &mce_bank_devs[j].attr);
 error:
 	while (--i >= 0)
 		device_remove_file(dev, mce_device_attrs[i]);
@@ -2258,7 +2286,7 @@ static void mce_device_remove(unsigned int cpu)
 		device_remove_file(dev, mce_device_attrs[i]);
 
 	for (i = 0; i < mca_cfg.banks; i++)
-		device_remove_file(dev, &mce_banks[i].attr);
+		device_remove_file(dev, &mce_bank_devs[i].attr);
 
 	device_unregister(dev);
 	cpumask_clear_cpu(cpu, mce_device_initialized);
@@ -2279,6 +2307,7 @@ static void mce_disable_cpu(void)
 
 static void mce_reenable_cpu(void)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	int i;
 
 	if (!mce_available(raw_cpu_ptr(&cpu_info)))
@@ -2336,10 +2365,12 @@ static __init void mce_init_banks(void)
 {
 	int i;
 
-	for (i = 0; i < mca_cfg.banks; i++) {
-		struct mce_bank *b = &mce_banks[i];
+	for (i = 0; i < MAX_NR_BANKS; i++) {
+		struct mce_bank_dev *b = &mce_bank_devs[i];
 		struct device_attribute *a = &b->attr;
 
+		b->bank = i;
+
 		sysfs_attr_init(&a->attr);
 		a->attr.name	= b->attrname;
 		snprintf(b->attrname, ATTR_LEN, "bank%d", i);

[PATCH v3 2/6] x86/MCE: Handle MCA controls in a per_cpu way

[Ghannam, Yazen]

From: Yazen Ghannam <yazen.ghannam@amd.com>

Current AMD systems have unique MCA banks per logical CPU even though
the type of the banks may all align to the same bank number. Each CPU
will have control of a set of MCA banks in the hardware and these are
not shared with other CPUs.

For example, bank 0 may be the Load-Store Unit on every logical CPU, but
each bank 0 is a unique structure in the hardware. In other words, there
isn't a *single* Load-Store Unit at MCA bank 0 that all logical CPUs
share.

This idea extends even to non-core MCA banks. For example, CPU0 and CPU4
may see a Unified Memory Controller at bank 15, but each CPU is actually
seeing a unique hardware structure that is not shared with other CPUs.

Because the MCA banks are all unique hardware structures, it would be
good to control them in a more granular way. For example, if there is a
known issue with the Floating Point Unit on CPU5 and a user wishes to
disable an error type on the Floating Point Unit, then it would be good
to do this only for CPU5 rather than all CPUs.

Also, future AMD systems may have heterogeneous MCA banks. Meaning the
bank numbers may not necessarily represent the same types between CPUs.
For example, bank 20 visible to CPU0 may be a Unified Memory Controller
and bank 20 visible to CPU4 may be a Coherent Slave. So granular control
will be even more necessary should the user wish to control specific MCA
banks.

Split the device attributes from struct mce_bank leaving only the MCA
bank control fields.

Make struct mce_banks[] per_cpu in order to have more granular control
over individual MCA banks in the hardware.

Allocate the device attributes statically based on the maximum number of
MCA banks supported. The sysfs interface will use as many as needed per
CPU. Currently, this is set to mca_cfg.banks, but will be changed to a
per_cpu bank count in a future patch.

Allocate the MCA control bits dynamically. Use the maximum number of MCA
banks supported for now. This will be changed to a per_cpu bank count in
a future patch.

Redo the sysfs store/show functions to handle the per_cpu mce_banks[].

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-3-Yazen.Ghannam@amd.com

v2->v3:
* Keep old member alignment in struct mce_bank.
* Change "cpu" to "CPU" in modified comment.
* Use a local array pointer when doing multiple per_cpu accesses.

v1->v2:
* Change "struct mce_bank*" to "struct mce_bank *" in definition.

 arch/x86/kernel/cpu/mce/core.c | 59 ++++++++++++++++++++++++++--------
 1 file changed, 45 insertions(+), 14 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index ba5767dd5538..66347bdc8b08 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -64,16 +64,21 @@ static DEFINE_MUTEX(mce_sysfs_mutex);
 
 DEFINE_PER_CPU(unsigned, mce_exception_count);
 
-#define ATTR_LEN               16
-/* One object for each MCE bank, shared by all CPUs */
 struct mce_bank {
 	u64			ctl;			/* subevents to enable */
 	bool			init;			/* initialise bank? */
+};
+static DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank *, mce_banks_percpu);
+
+#define ATTR_LEN               16
+/* One object for each MCE bank, shared by all CPUs */
+struct mce_bank_dev {
 	struct device_attribute	attr;			/* device attribute */
 	char			attrname[ATTR_LEN];	/* attribute name */
+	u8			bank;			/* bank number */
 };
+static struct mce_bank_dev mce_bank_devs[MAX_NR_BANKS];
 
-static struct mce_bank *mce_banks __read_mostly;
 struct mce_vendor_flags mce_flags __read_mostly;
 
 struct mca_config mca_cfg __read_mostly = {
@@ -683,6 +688,7 @@ DEFINE_PER_CPU(unsigned, mce_poll_count);
  */
 bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	bool error_seen = false;
 	struct mce m;
 	int i;
@@ -1130,6 +1136,7 @@ static void __mc_scan_banks(struct mce *m, struct mce *final,
 			    unsigned long *toclear, unsigned long *valid_banks,
 			    int no_way_out, int *worst)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	struct mca_config *cfg = &mca_cfg;
 	int severity, i;
 
@@ -1473,6 +1480,7 @@ EXPORT_SYMBOL_GPL(mce_notify_irq);
 
 static int __mcheck_cpu_mce_banks_init(void)
 {
+	struct mce_bank *mce_banks;
 	int i;
 
 	mce_banks = kcalloc(MAX_NR_BANKS, sizeof(struct mce_bank), GFP_KERNEL);
@@ -1485,6 +1493,8 @@ static int __mcheck_cpu_mce_banks_init(void)
 		b->ctl = -1ULL;
 		b->init = 1;
 	}
+
+	per_cpu(mce_banks_percpu, smp_processor_id()) = mce_banks;
 	return 0;
 }
 
@@ -1504,7 +1514,7 @@ static int __mcheck_cpu_cap_init(void)
 
 	mca_cfg.banks = max(mca_cfg.banks, b);
 
-	if (!mce_banks) {
+	if (!this_cpu_read(mce_banks_percpu)) {
 		int err = __mcheck_cpu_mce_banks_init();
 		if (err)
 			return err;
@@ -1544,6 +1554,7 @@ static void __mcheck_cpu_init_generic(void)
 
 static void __mcheck_cpu_init_clear_banks(void)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	int i;
 
 	for (i = 0; i < mca_cfg.banks; i++) {
@@ -1587,6 +1598,7 @@ static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs)
 /* Add per CPU specific workarounds here */
 static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	struct mca_config *cfg = &mca_cfg;
 
 	if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
@@ -1957,6 +1969,7 @@ int __init mcheck_init(void)
  */
 static void mce_disable_error_reporting(void)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	int i;
 
 	for (i = 0; i < mca_cfg.banks; i++) {
@@ -2059,26 +2072,41 @@ static struct bus_type mce_subsys = {
 
 DEFINE_PER_CPU(struct device *, mce_device);
 
-static inline struct mce_bank *attr_to_bank(struct device_attribute *attr)
+static inline struct mce_bank_dev *attr_to_bank(struct device_attribute *attr)
 {
-	return container_of(attr, struct mce_bank, attr);
+	return container_of(attr, struct mce_bank_dev, attr);
 }
 
 static ssize_t show_bank(struct device *s, struct device_attribute *attr,
 			 char *buf)
 {
-	return sprintf(buf, "%llx\n", attr_to_bank(attr)->ctl);
+	u8 bank = attr_to_bank(attr)->bank;
+	struct mce_bank *b;
+
+	if (bank >= mca_cfg.banks)
+		return -EINVAL;
+
+	b = &per_cpu(mce_banks_percpu, s->id)[bank];
+
+	return sprintf(buf, "%llx\n", b->ctl);
 }
 
 static ssize_t set_bank(struct device *s, struct device_attribute *attr,
 			const char *buf, size_t size)
 {
+	u8 bank = attr_to_bank(attr)->bank;
+	struct mce_bank *b;
 	u64 new;
 
 	if (kstrtou64(buf, 0, &new) < 0)
 		return -EINVAL;
 
-	attr_to_bank(attr)->ctl = new;
+	if (bank >= mca_cfg.banks)
+		return -EINVAL;
+
+	b = &per_cpu(mce_banks_percpu, s->id)[bank];
+
+	b->ctl = new;
 	mce_restart();
 
 	return size;
@@ -2193,7 +2221,7 @@ static void mce_device_release(struct device *dev)
 	kfree(dev);
 }
 
-/* Per cpu device init. All of the cpus still share the same ctrl bank: */
+/* Per CPU device init. All of the CPUs still share the same bank device: */
 static int mce_device_create(unsigned int cpu)
 {
 	struct device *dev;
@@ -2226,7 +2254,7 @@ static int mce_device_create(unsigned int cpu)
 			goto error;
 	}
 	for (j = 0; j < mca_cfg.banks; j++) {
-		err = device_create_file(dev, &mce_banks[j].attr);
+		err = device_create_file(dev, &mce_bank_devs[j].attr);
 		if (err)
 			goto error2;
 	}
@@ -2236,7 +2264,7 @@ static int mce_device_create(unsigned int cpu)
 	return 0;
 error2:
 	while (--j >= 0)
-		device_remove_file(dev, &mce_banks[j].attr);
+		device_remove_file(dev, &mce_bank_devs[j].attr);
 error:
 	while (--i >= 0)
 		device_remove_file(dev, mce_device_attrs[i]);
@@ -2258,7 +2286,7 @@ static void mce_device_remove(unsigned int cpu)
 		device_remove_file(dev, mce_device_attrs[i]);
 
 	for (i = 0; i < mca_cfg.banks; i++)
-		device_remove_file(dev, &mce_banks[i].attr);
+		device_remove_file(dev, &mce_bank_devs[i].attr);
 
 	device_unregister(dev);
 	cpumask_clear_cpu(cpu, mce_device_initialized);
@@ -2279,6 +2307,7 @@ static void mce_disable_cpu(void)
 
 static void mce_reenable_cpu(void)
 {
+	struct mce_bank *mce_banks = this_cpu_read(mce_banks_percpu);
 	int i;
 
 	if (!mce_available(raw_cpu_ptr(&cpu_info)))
@@ -2336,10 +2365,12 @@ static __init void mce_init_banks(void)
 {
 	int i;
 
-	for (i = 0; i < mca_cfg.banks; i++) {
-		struct mce_bank *b = &mce_banks[i];
+	for (i = 0; i < MAX_NR_BANKS; i++) {
+		struct mce_bank_dev *b = &mce_bank_devs[i];
 		struct device_attribute *a = &b->attr;
 
+		b->bank = i;
+
 		sysfs_attr_init(&a->attr);
 		a->attr.name	= b->attrname;
 		snprintf(b->attrname, ATTR_LEN, "bank%d", i);
-- 
2.17.1

[v3,1/6] x86/MCE: Make struct mce_banks[] static

[Yazen Ghannam]

From: Yazen Ghannam <yazen.ghannam@amd.com>

The struct mce_banks[] array is only used in mce/core.c so move the
definition of struct mce_bank to mce/core.c and make the array static.

Also, change the "init" field to bool type.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-2-Yazen.Ghannam@amd.com

v2->v3:
* No changes

v1->v2:
* No changes

 arch/x86/kernel/cpu/mce/core.c     | 11 ++++++++++-
 arch/x86/kernel/cpu/mce/internal.h | 10 ----------
 2 files changed, 10 insertions(+), 11 deletions(-)

-- 
2.17.1

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 5112a50e6486..ba5767dd5538 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -64,7 +64,16 @@ static DEFINE_MUTEX(mce_sysfs_mutex);
 
 DEFINE_PER_CPU(unsigned, mce_exception_count);
 
-struct mce_bank *mce_banks __read_mostly;
+#define ATTR_LEN               16
+/* One object for each MCE bank, shared by all CPUs */
+struct mce_bank {
+	u64			ctl;			/* subevents to enable */
+	bool			init;			/* initialise bank? */
+	struct device_attribute	attr;			/* device attribute */
+	char			attrname[ATTR_LEN];	/* attribute name */
+};
+
+static struct mce_bank *mce_banks __read_mostly;
 struct mce_vendor_flags mce_flags __read_mostly;
 
 struct mca_config mca_cfg __read_mostly = {
diff --git a/arch/x86/kernel/cpu/mce/internal.h b/arch/x86/kernel/cpu/mce/internal.h
index a34b55baa7aa..35b3e5c02c1c 100644
--- a/arch/x86/kernel/cpu/mce/internal.h
+++ b/arch/x86/kernel/cpu/mce/internal.h
@@ -22,17 +22,8 @@ enum severity_level {
 
 extern struct blocking_notifier_head x86_mce_decoder_chain;
 
-#define ATTR_LEN		16
 #define INITIAL_CHECK_INTERVAL	5 * 60 /* 5 minutes */
 
-/* One object for each MCE bank, shared by all CPUs */
-struct mce_bank {
-	u64			ctl;			/* subevents to enable */
-	unsigned char init;				/* initialise bank? */
-	struct device_attribute attr;			/* device attribute */
-	char			attrname[ATTR_LEN];	/* attribute name */
-};
-
 struct mce_evt_llist {
 	struct llist_node llnode;
 	struct mce mce;
@@ -47,7 +38,6 @@ struct llist_node *mce_gen_pool_prepare_records(void);
 extern int (*mce_severity)(struct mce *a, int tolerant, char **msg, bool is_excp);
 struct dentry *mce_get_debugfs_dir(void);
 
-extern struct mce_bank *mce_banks;
 extern mce_banks_t mce_banks_ce_disabled;
 
 #ifdef CONFIG_X86_MCE_INTEL

[PATCH v3 1/6] x86/MCE: Make struct mce_banks[] static

[Ghannam, Yazen]

From: Yazen Ghannam <yazen.ghannam@amd.com>

The struct mce_banks[] array is only used in mce/core.c so move the
definition of struct mce_bank to mce/core.c and make the array static.

Also, change the "init" field to bool type.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190411201743.43195-2-Yazen.Ghannam@amd.com

v2->v3:
* No changes

v1->v2:
* No changes

 arch/x86/kernel/cpu/mce/core.c     | 11 ++++++++++-
 arch/x86/kernel/cpu/mce/internal.h | 10 ----------
 2 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 5112a50e6486..ba5767dd5538 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -64,7 +64,16 @@ static DEFINE_MUTEX(mce_sysfs_mutex);
 
 DEFINE_PER_CPU(unsigned, mce_exception_count);
 
-struct mce_bank *mce_banks __read_mostly;
+#define ATTR_LEN               16
+/* One object for each MCE bank, shared by all CPUs */
+struct mce_bank {
+	u64			ctl;			/* subevents to enable */
+	bool			init;			/* initialise bank? */
+	struct device_attribute	attr;			/* device attribute */
+	char			attrname[ATTR_LEN];	/* attribute name */
+};
+
+static struct mce_bank *mce_banks __read_mostly;
 struct mce_vendor_flags mce_flags __read_mostly;
 
 struct mca_config mca_cfg __read_mostly = {
diff --git a/arch/x86/kernel/cpu/mce/internal.h b/arch/x86/kernel/cpu/mce/internal.h
index a34b55baa7aa..35b3e5c02c1c 100644
--- a/arch/x86/kernel/cpu/mce/internal.h
+++ b/arch/x86/kernel/cpu/mce/internal.h
@@ -22,17 +22,8 @@ enum severity_level {
 
 extern struct blocking_notifier_head x86_mce_decoder_chain;
 
-#define ATTR_LEN		16
 #define INITIAL_CHECK_INTERVAL	5 * 60 /* 5 minutes */
 
-/* One object for each MCE bank, shared by all CPUs */
-struct mce_bank {
-	u64			ctl;			/* subevents to enable */
-	unsigned char init;				/* initialise bank? */
-	struct device_attribute attr;			/* device attribute */
-	char			attrname[ATTR_LEN];	/* attribute name */
-};
-
 struct mce_evt_llist {
 	struct llist_node llnode;
 	struct mce mce;
@@ -47,7 +38,6 @@ struct llist_node *mce_gen_pool_prepare_records(void);
 extern int (*mce_severity)(struct mce *a, int tolerant, char **msg, bool is_excp);
 struct dentry *mce_get_debugfs_dir(void);
 
-extern struct mce_bank *mce_banks;
 extern mce_banks_t mce_banks_ce_disabled;
 
 #ifdef CONFIG_X86_MCE_INTEL
-- 
2.17.1