All of lore.kernel.org
 help / color / mirror / Atom feed
From: jun.li@nxp.com
To: shawnguo@kernel.org, sboyd@kernel.org, robh+dt@kernel.org
Cc: mark.rutland@arm.com, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	mturquette@baylibre.com, Peter.Chen@nxp.com, ping.bai@nxp.com,
	leonard.crestez@nxp.com, daniel.baluta@nxp.com, jun.li@nxp.com,
	Anson.Huang@nxp.com, aisheng.dong@nxp.com, peng.fan@nxp.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-clk@vger.kernel.org
Subject: [PATCH 4/5] arm64: dts: imx8mm: Remove setting for IMX8MM_CLK_USB_CORE_REF
Date: Wed,  3 Jul 2019 15:23:26 +0800	[thread overview]
Message-ID: <20190703072327.38165-2-jun.li@nxp.com> (raw)
In-Reply-To: <20190703072327.38165-1-jun.li@nxp.com>

From: Li Jun <jun.li@nxp.com>

Since IMX8MM_CLK_USB_CORE_REF is not used at all, so remove the setting
for it.

Signed-off-by: Li Jun <jun.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 232a741..5d691a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -743,10 +743,8 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
 				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
-						  <&clk IMX8MM_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
-							 <&clk IMX8MM_SYS_PLL1_100M>;
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
 				status = "disabled";
@@ -764,10 +762,8 @@
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
 				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
-						  <&clk IMX8MM_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
-							 <&clk IMX8MM_SYS_PLL1_100M>;
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
 				status = "disabled";
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: jun.li@nxp.com
To: shawnguo@kernel.org, sboyd@kernel.org, robh+dt@kernel.org
Cc: mark.rutland@arm.com, Peter.Chen@nxp.com, peng.fan@nxp.com,
	ping.bai@nxp.com, Anson.Huang@nxp.com,
	devicetree@vger.kernel.org, daniel.baluta@nxp.com,
	mturquette@baylibre.com, linux-clk@vger.kernel.org,
	linux-imx@nxp.com, kernel@pengutronix.de, aisheng.dong@nxp.com,
	leonard.crestez@nxp.com, festevam@gmail.com,
	s.hauer@pengutronix.de, linux-arm-kernel@lists.infradead.org,
	jun.li@nxp.com
Subject: [PATCH 4/5] arm64: dts: imx8mm: Remove setting for IMX8MM_CLK_USB_CORE_REF
Date: Wed,  3 Jul 2019 15:23:26 +0800	[thread overview]
Message-ID: <20190703072327.38165-2-jun.li@nxp.com> (raw)
In-Reply-To: <20190703072327.38165-1-jun.li@nxp.com>

From: Li Jun <jun.li@nxp.com>

Since IMX8MM_CLK_USB_CORE_REF is not used at all, so remove the setting
for it.

Signed-off-by: Li Jun <jun.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 232a741..5d691a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -743,10 +743,8 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
 				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
-						  <&clk IMX8MM_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
-							 <&clk IMX8MM_SYS_PLL1_100M>;
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
 				status = "disabled";
@@ -764,10 +762,8 @@
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
 				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
-						  <&clk IMX8MM_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
-							 <&clk IMX8MM_SYS_PLL1_100M>;
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
 				status = "disabled";
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: jun.li@nxp.com
To: shawnguo@kernel.org, sboyd@kernel.org, robh+dt@kernel.org
Cc: mark.rutland@arm.com, Peter.Chen@nxp.com, peng.fan@nxp.com,
	ping.bai@nxp.com, Anson.Huang@nxp.com,
	devicetree@vger.kernel.org, daniel.baluta@nxp.com,
	mturquette@baylibre.com, linux-clk@vger.kernel.org,
	linux-imx@nxp.com, kernel@pengutronix.de, aisheng.dong@nxp.com,
	leonard.crestez@nxp.com, festevam@gmail.com,
	s.hauer@pengutronix.de, linux-arm-kernel@lists.infradead.org,
	jun.li@nxp.com
Subject: [PATCH 4/5] arm64: dts: imx8mm: Remove setting for IMX8MM_CLK_USB_CORE_REF
Date: Wed,  3 Jul 2019 15:23:26 +0800	[thread overview]
Message-ID: <20190703072327.38165-2-jun.li@nxp.com> (raw)
In-Reply-To: <20190703072327.38165-1-jun.li@nxp.com>

From: Li Jun <jun.li@nxp.com>

Since IMX8MM_CLK_USB_CORE_REF is not used at all, so remove the setting
for it.

Signed-off-by: Li Jun <jun.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 232a741..5d691a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -743,10 +743,8 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
 				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
-						  <&clk IMX8MM_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
-							 <&clk IMX8MM_SYS_PLL1_100M>;
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
 				status = "disabled";
@@ -764,10 +762,8 @@
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
 				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
-						  <&clk IMX8MM_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
-							 <&clk IMX8MM_SYS_PLL1_100M>;
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
 				status = "disabled";
-- 
2.7.4

  reply	other threads:[~2019-07-03  7:32 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-03  7:23 [PATCH 3/5] clk: imx8mm: correct the usb1_ctrl parent to be usb_bus jun.li
2019-07-03  7:23 ` jun.li
2019-07-03  7:23 ` jun.li
2019-07-03  7:23 ` jun.li [this message]
2019-07-03  7:23   ` [PATCH 4/5] arm64: dts: imx8mm: Remove setting for IMX8MM_CLK_USB_CORE_REF jun.li
2019-07-03  7:23   ` jun.li
2019-07-03  7:23 ` [PATCH 5/5] arm64: dts: imx8mm-evk: enable usb1 and typec support jun.li
2019-07-03  7:23   ` jun.li
2019-07-03  7:23   ` jun.li
2019-07-22  3:34 ` [PATCH 3/5] clk: imx8mm: correct the usb1_ctrl parent to be usb_bus Shawn Guo
2019-07-22  3:34   ` Shawn Guo
2019-07-22  3:34   ` Shawn Guo
2019-07-24 11:09   ` Jun Li
2019-07-24 11:09     ` Jun Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190703072327.38165-2-jun.li@nxp.com \
    --to=jun.li@nxp.com \
    --cc=Anson.Huang@nxp.com \
    --cc=Peter.Chen@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=daniel.baluta@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=peng.fan@nxp.com \
    --cc=ping.bai@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.