All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL
Date: Mon, 29 Jul 2019 08:58:09 +0200	[thread overview]
Message-ID: <20190729065810.19452-13-brgl@bgdev.pl> (raw)
In-Reply-To: <20190729065810.19452-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Enable CONFIG_SPL_DM and enable the driver model for serial by defining
an appropriate device in the board file for da850-lcdk.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 board/davinci/da8xxevm/omapl138_lcdk.c | 16 ++++++++++++++++
 configs/omapl138_lcdk_defconfig        |  5 +++++
 2 files changed, 21 insertions(+)

diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
index 7f8c28b953..578d928443 100644
--- a/board/davinci/da8xxevm/omapl138_lcdk.c
+++ b/board/davinci/da8xxevm/omapl138_lcdk.c
@@ -14,6 +14,8 @@
 #include <asm/arch/hardware.h>
 #include <asm/ti-common/davinci_nand.h>
 #include <asm/io.h>
+#include <ns16550.h>
+#include <dm/platdata.h>
 #include <linux/errno.h>
 #include <asm/mach-types.h>
 #include <asm/arch/davinci_misc.h>
@@ -355,3 +357,17 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 #endif
+
+#ifdef CONFIG_SPL_BUILD
+static const struct ns16550_platdata serial_pdata = {
+	.base = DAVINCI_UART2_BASE,
+	.reg_shift = 2,
+	.clock = 228000000,
+	.fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DEVICE(omapl138_uart) = {
+	.name = "ns16550_serial",
+	.platdata = &serial_pdata,
+};
+#endif
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index c4eebb3612..26b4950f8f 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -33,10 +33,13 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_DIAG=y
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk"
+CONFIG_SPL_OF_PLATDATA=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+CONFIG_SPL_DM=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_DM_MMC=y
@@ -51,6 +54,8 @@ CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_DM_ETH=y
 CONFIG_MII=y
 CONFIG_DRIVER_TI_EMAC=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_USE_TINY_PRINTF=y
+# CONFIG_SPL_OF_LIBFDT is not set
-- 
2.21.0

  parent reply	other threads:[~2019-07-29  6:58 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-29  6:57 [U-Boot] [RESEND PATCH v2 00/13] ARM: davinci: driver-model improvements Bartosz Golaszewski
2019-07-29  6:57 ` [U-Boot] [RESEND PATCH v2 01/13] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs Bartosz Golaszewski
2019-07-29 16:14   ` Tom Rini
2019-07-29 16:24     ` Adam Ford
2019-07-30  1:21   ` Tom Rini
2019-07-29  6:57 ` [U-Boot] [RESEND PATCH v2 02/13] sandbox: " Bartosz Golaszewski
2019-07-30  1:21   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 03/13] i2c: remove i2c driver-model compatibility layer Bartosz Golaszewski
2019-07-30  1:21   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 04/13] omapl138_lcdk_defconfig: don't build support for SPI Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 05/13] nand: davinci: make davinci_nand_init() static Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 06/13] nand: davinci: add support for driver model Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 07/13] davinci: omapl138-lcdk: enable driver model for NAND Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 08/13] davinci: da850-evm: " Bartosz Golaszewski
2019-07-29 18:14   ` Adam Ford
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 09/13] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 10/13] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 11/13] davinci: omapl138-lcdk: remove unneeded includes Bartosz Golaszewski
2019-07-30  1:22   ` Tom Rini
2019-07-29  6:58 ` Bartosz Golaszewski [this message]
2019-07-30  1:23   ` [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL Tom Rini
2019-09-25 13:34   ` Faiz Abbas
2019-10-25 16:10     ` Bartosz Golaszewski
2019-10-25 17:25       ` Rizvi, Mohammad Faiz Abbas
2019-10-27 18:05         ` Bartosz Golaszewski
2019-11-08 15:50       ` Bartosz Golaszewski
2019-11-08 16:14         ` Adam Ford
2019-11-08 17:33           ` Bartosz Golaszewski
2019-11-08 17:59             ` Bartosz Golaszewski
2019-11-11 12:57               ` Adam Ford
2019-11-13 10:52                 ` Bartosz Golaszewski
2019-11-13 10:55                   ` Bartosz Golaszewski
2019-11-11 10:18         ` Faiz Abbas
2019-07-29  6:58 ` [U-Boot] [RESEND PATCH v2 13/13] configs: omapl138_lcdk: enable NAND self-init " Bartosz Golaszewski
2019-07-30  1:23   ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190729065810.19452-13-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.