From: Bartosz Golaszewski <brgl@bgdev.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND PATCH v2 06/13] nand: davinci: add support for driver model
Date: Mon, 29 Jul 2019 08:58:03 +0200 [thread overview]
Message-ID: <20190729065810.19452-7-brgl@bgdev.pl> (raw)
In-Reply-To: <20190729065810.19452-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Extend the davinci NAND driver to support the driver model. For now this
doesn't add any device-tree parsing due to the fact that we can't access
the actual nand node on the device-tree - it's a subnode of the aemif
device and we don't have an aemif driver on davinci at the moment.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/mtd/nand/raw/davinci_nand.c | 46 ++++++++++++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index e1c4498cb9..33c2f16be8 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -31,6 +31,7 @@
#include <common.h>
#include <asm/io.h>
#include <nand.h>
+#include <dm/uclass.h>
#include <asm/ti-common/davinci_nand.h>
/* Definitions for 4-bit hardware ECC */
@@ -785,10 +786,53 @@ static void davinci_nand_init(struct nand_chip *nand)
nand->dev_ready = nand_davinci_dev_ready;
}
-int board_nand_init(struct nand_chip *chip) __attribute__((weak));
+#ifdef CONFIG_SYS_NAND_SELF_INIT
+static int davinci_nand_probe(struct udevice *dev)
+{
+ struct nand_chip *nand = dev_get_priv(dev);
+ struct mtd_info *mtd = nand_to_mtd(nand);
+ int ret;
+
+ nand->IO_ADDR_R = (void __iomem *)CONFIG_SYS_NAND_BASE;
+ nand->IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE;
+
+ davinci_nand_init(nand);
+
+ ret = nand_scan(mtd, CONFIG_SYS_NAND_MAX_CHIPS);
+ if (ret)
+ return ret;
+
+ return nand_register(0, mtd);
+}
+
+static const struct udevice_id davinci_nand_ids[] = {
+ { .compatible = "ti,davinci-nand" },
+ { }
+};
+
+U_BOOT_DRIVER(davinci_nand) = {
+ .name = "davinci-nand",
+ .id = UCLASS_MTD,
+ .of_match = davinci_nand_ids,
+ .probe = davinci_nand_probe,
+ .priv_auto_alloc_size = sizeof(struct nand_chip),
+};
+
+void board_nand_init(void)
+{
+ struct udevice *dev;
+ int ret;
+ ret = uclass_get_device_by_driver(UCLASS_MTD,
+ DM_GET_DRIVER(davinci_nand), &dev);
+ if (ret && ret != -ENODEV)
+ pr_err("Failed to initialize %s: %d\n", dev->name, ret);
+}
+#else
+int board_nand_init(struct nand_chip *chip) __attribute__((weak));
int board_nand_init(struct nand_chip *chip)
{
davinci_nand_init(chip);
return 0;
}
+#endif /* CONFIG_SYS_NAND_SELF_INIT */
--
2.21.0
next prev parent reply other threads:[~2019-07-29 6:58 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-29 6:57 [U-Boot] [RESEND PATCH v2 00/13] ARM: davinci: driver-model improvements Bartosz Golaszewski
2019-07-29 6:57 ` [U-Boot] [RESEND PATCH v2 01/13] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs Bartosz Golaszewski
2019-07-29 16:14 ` Tom Rini
2019-07-29 16:24 ` Adam Ford
2019-07-30 1:21 ` Tom Rini
2019-07-29 6:57 ` [U-Boot] [RESEND PATCH v2 02/13] sandbox: " Bartosz Golaszewski
2019-07-30 1:21 ` Tom Rini
2019-07-29 6:58 ` [U-Boot] [RESEND PATCH v2 03/13] i2c: remove i2c driver-model compatibility layer Bartosz Golaszewski
2019-07-30 1:21 ` Tom Rini
2019-07-29 6:58 ` [U-Boot] [RESEND PATCH v2 04/13] omapl138_lcdk_defconfig: don't build support for SPI Bartosz Golaszewski
2019-07-30 1:22 ` Tom Rini
2019-07-29 6:58 ` [U-Boot] [RESEND PATCH v2 05/13] nand: davinci: make davinci_nand_init() static Bartosz Golaszewski
2019-07-30 1:22 ` Tom Rini
2019-07-29 6:58 ` Bartosz Golaszewski [this message]
2019-07-30 1:22 ` [U-Boot] [RESEND PATCH v2 06/13] nand: davinci: add support for driver model Tom Rini
2019-07-29 6:58 ` [U-Boot] [RESEND PATCH v2 07/13] davinci: omapl138-lcdk: enable driver model for NAND Bartosz Golaszewski
2019-07-30 1:22 ` Tom Rini
2019-07-29 6:58 ` [U-Boot] [RESEND PATCH v2 08/13] davinci: da850-evm: " Bartosz Golaszewski
2019-07-29 18:14 ` Adam Ford
2019-07-30 1:22 ` Tom Rini
2019-07-29 6:58 ` [U-Boot] [RESEND PATCH v2 09/13] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE Bartosz Golaszewski
2019-07-30 1:22 ` Tom Rini
2019-07-29 6:58 ` [U-Boot] [RESEND PATCH v2 10/13] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF Bartosz Golaszewski
2019-07-30 1:22 ` Tom Rini
2019-07-29 6:58 ` [U-Boot] [RESEND PATCH v2 11/13] davinci: omapl138-lcdk: remove unneeded includes Bartosz Golaszewski
2019-07-30 1:22 ` Tom Rini
2019-07-29 6:58 ` [U-Boot] [RESEND PATCH v2 12/13] davinci: omapl138-lcdk: enable driver-model in SPL Bartosz Golaszewski
2019-07-30 1:23 ` Tom Rini
2019-09-25 13:34 ` Faiz Abbas
2019-10-25 16:10 ` Bartosz Golaszewski
2019-10-25 17:25 ` Rizvi, Mohammad Faiz Abbas
2019-10-27 18:05 ` Bartosz Golaszewski
2019-11-08 15:50 ` Bartosz Golaszewski
2019-11-08 16:14 ` Adam Ford
2019-11-08 17:33 ` Bartosz Golaszewski
2019-11-08 17:59 ` Bartosz Golaszewski
2019-11-11 12:57 ` Adam Ford
2019-11-13 10:52 ` Bartosz Golaszewski
2019-11-13 10:55 ` Bartosz Golaszewski
2019-11-11 10:18 ` Faiz Abbas
2019-07-29 6:58 ` [U-Boot] [RESEND PATCH v2 13/13] configs: omapl138_lcdk: enable NAND self-init " Bartosz Golaszewski
2019-07-30 1:23 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190729065810.19452-7-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.