Re: [PATCH 1/5] arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT

From: Shawn Guo <shawnguo@kernel.org>
To: Anson Huang <Anson.Huang@nxp.com>
Cc: mark.rutland@arm.com, baruch@tkos.co.il,
	dafna.hirschfeld@collabora.com, ping.bai@nxp.com,
	ccaione@baylibre.com, agx@sigxcpu.org, angus@akkea.ca,
	peng.fan@nxp.com, gary.bisson@boundarydevices.com, pavel@ucw.cz,
	manivannan.sadhasivam@linaro.org, leonard.crestez@nxp.com,
	festevam@gmail.com, richard.hu@technexion.com, abel.vesa@nxp.com,
	andrew.smirnov@gmail.com, daniel.lezcano@linaro.org,
	jon@solid-run.com, Linux-imx@nxp.com, devicetree@vger.kernel.org,
	andradanciu1997@gmail.com, s.hauer@pengutronix.de,
	troy.kisky@boundarydevices.com, robh+dt@kernel.org,
	daniel.baluta@nxp.com, linux-arm-kernel@lists.infradead.org,
	aisheng.dong@nxp.com, fugang.duan@nxp.com,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	jun.li@nxp.com, l.stach@pengutronix.de
Subject: Re: [PATCH 1/5] arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT
Date: Sat, 26 Oct 2019 20:09:05 +0800	[thread overview]
Message-ID: <20191026120902.GL14401@dragon> (raw)
In-Reply-To: <1571192067-19600-1-git-send-email-Anson.Huang@nxp.com>

On Wed, Oct 16, 2019 at 10:14:23AM +0800, Anson Huang wrote:
> usdhc's clock rate is different according to different devices
> connected, so clock rate assignment should be placed in board
> DT according to different devices connected on each usdhc port.

I think it should be fine that we have a reasonable default settings in
soc.dtsi, and boards that need a different setup can overwrite the
settings in board.dts.

Shawn

> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts | 4 ++++
>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts   | 4 ++++
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi      | 6 ------
>  3 files changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
> index 91eef97..a3f8cf1 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
> @@ -133,6 +133,8 @@
>  &usdhc1 {
>  	#address-cells = <1>;
>  	#size-cells = <0>;
> +	assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
> +	assigned-clock-rates = <200000000>;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
>  	bus-width = <4>;
> @@ -149,6 +151,8 @@
>  
>  /* SD */
>  &usdhc2 {
> +	assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
> +	assigned-clock-rates = <200000000>;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc2>;
>  	bus-width = <4>;
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> index 88dd9132..d3d26cc 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> @@ -137,6 +137,8 @@
>  };
>  
>  &usdhc1 {
> +	assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
> +	assigned-clock-rates = <200000000>;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
>  	bus-width = <8>;
> @@ -147,6 +149,8 @@
>  };
>  
>  &usdhc2 {
> +	assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
> +	assigned-clock-rates = <200000000>;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc2>;
>  	bus-width = <4>;
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 2d69f1a..9646a41 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -368,8 +368,6 @@
>  				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
>  				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
>  			clock-names = "ipg", "per", "ahb";
> -			assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
> -			assigned-clock-rates = <200000000>;
>  			power-domains = <&pd IMX_SC_R_SDHC_0>;
>  			status = "disabled";
>  		};
> @@ -383,8 +381,6 @@
>  				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
>  				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
>  			clock-names = "ipg", "per", "ahb";
> -			assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
> -			assigned-clock-rates = <200000000>;
>  			power-domains = <&pd IMX_SC_R_SDHC_1>;
>  			fsl,tuning-start-tap = <20>;
>  			fsl,tuning-step= <2>;
> @@ -400,8 +396,6 @@
>  				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>,
>  				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>;
>  			clock-names = "ipg", "per", "ahb";
> -			assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>;
> -			assigned-clock-rates = <200000000>;
>  			power-domains = <&pd IMX_SC_R_SDHC_2>;
>  			status = "disabled";
>  		};
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel