From: Shawn Guo <shawnguo@kernel.org>
To: Michael Walle <michael@walle.cc>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/4] arm64: dts: ls1028a: add missing sai nodes
Date: Mon, 9 Dec 2019 14:31:29 +0800 [thread overview]
Message-ID: <20191209063128.GC3365@dragon> (raw)
In-Reply-To: <20191123201317.25861-3-michael@walle.cc>
On Sat, Nov 23, 2019 at 09:13:15PM +0100, Michael Walle wrote:
> The LS1028A has six SAI cores.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 42 +++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index f2e71fd57b20..6730922c2d47 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -534,6 +534,20 @@
> status = "disabled";
> };
>
> + sai3: audio-controller@f120000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf120000 0x0 0x10000>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 8>,
> + <&edma0 1 7>;
> + status = "disabled";
> + };
> +
> sai4: audio-controller@f130000 {
> #sound-dai-cells = <0>;
> compatible = "fsl,vf610-sai";
> @@ -548,6 +562,34 @@
> status = "disabled";
> };
>
> + sai5: audio-controller@f140000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf140000 0x0 0x10000>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 12>,
> + <&edma0 1 11>;
> + status = "disabled";
> + };
> +
> + sai6: audio-controller@f150000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf150000 0x0 0x10000>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 14>,
> + <&edma0 1 13>;
> + status = "disabled";
> + };
> +
> tmu: tmu@1f00000 {
Not sure what your base is, but I have tmu@1f80000. And that makes
the patch applying fail here.
Shawn
> compatible = "fsl,qoriq-tmu";
> reg = <0x0 0x1f80000 0x0 0x10000>;
> --
> 2.20.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Michael Walle <michael@walle.cc>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: Re: [PATCH 2/4] arm64: dts: ls1028a: add missing sai nodes
Date: Mon, 9 Dec 2019 14:31:29 +0800 [thread overview]
Message-ID: <20191209063128.GC3365@dragon> (raw)
In-Reply-To: <20191123201317.25861-3-michael@walle.cc>
On Sat, Nov 23, 2019 at 09:13:15PM +0100, Michael Walle wrote:
> The LS1028A has six SAI cores.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 42 +++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index f2e71fd57b20..6730922c2d47 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -534,6 +534,20 @@
> status = "disabled";
> };
>
> + sai3: audio-controller@f120000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf120000 0x0 0x10000>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 8>,
> + <&edma0 1 7>;
> + status = "disabled";
> + };
> +
> sai4: audio-controller@f130000 {
> #sound-dai-cells = <0>;
> compatible = "fsl,vf610-sai";
> @@ -548,6 +562,34 @@
> status = "disabled";
> };
>
> + sai5: audio-controller@f140000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf140000 0x0 0x10000>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 12>,
> + <&edma0 1 11>;
> + status = "disabled";
> + };
> +
> + sai6: audio-controller@f150000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf150000 0x0 0x10000>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 14>,
> + <&edma0 1 13>;
> + status = "disabled";
> + };
> +
> tmu: tmu@1f00000 {
Not sure what your base is, but I have tmu@1f80000. And that makes
the patch applying fail here.
Shawn
> compatible = "fsl,qoriq-tmu";
> reg = <0x0 0x1f80000 0x0 0x10000>;
> --
> 2.20.1
>
next prev parent reply other threads:[~2019-12-09 6:31 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-23 20:13 [PATCH 0/4] ls1028a: dts fixes and new board support Michael Walle
2019-11-23 20:13 ` Michael Walle
2019-11-23 20:13 ` [PATCH 1/4] arm64: dts: ls1028a: fix typo in TMU calibration data Michael Walle
2019-11-23 20:13 ` Michael Walle
2019-12-09 6:24 ` Shawn Guo
2019-12-09 6:24 ` Shawn Guo
2019-12-09 6:39 ` [EXT] " Andy Tang
2019-12-09 6:39 ` Andy Tang
2019-12-09 8:41 ` Michael Walle
2019-12-09 8:41 ` Michael Walle
2019-11-23 20:13 ` [PATCH 2/4] arm64: dts: ls1028a: add missing sai nodes Michael Walle
2019-11-23 20:13 ` Michael Walle
2019-12-09 6:31 ` Shawn Guo [this message]
2019-12-09 6:31 ` Shawn Guo
2019-11-23 20:13 ` [PATCH 3/4] arm64: dts: ls1028a: add FlexSPI node Michael Walle
2019-11-23 20:13 ` Michael Walle
2019-11-26 6:40 ` [EXT] " Kuldeep Singh
2019-11-26 6:40 ` Kuldeep Singh
2019-11-26 10:08 ` Michael Walle
2019-11-26 10:08 ` Michael Walle
2019-12-02 5:43 ` Kuldeep Singh
2019-12-02 5:43 ` Kuldeep Singh
2019-11-23 20:13 ` [PATCH 4/4] arm64: dts: freescale: add Kontron sl28 support Michael Walle
2019-11-23 20:13 ` Michael Walle
2019-12-09 6:43 ` Shawn Guo
2019-12-09 6:43 ` Shawn Guo
2019-12-09 8:54 ` Michael Walle
2019-12-09 8:54 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191209063128.GC3365@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michael@walle.cc \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.