From: Shawn Guo <shawnguo@kernel.org>
To: Michael Walle <michael@walle.cc>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 4/4] arm64: dts: freescale: add Kontron sl28 support
Date: Mon, 9 Dec 2019 14:43:58 +0800 [thread overview]
Message-ID: <20191209064356.GD3365@dragon> (raw)
In-Reply-To: <20191123201317.25861-5-michael@walle.cc>
On Sat, Nov 23, 2019 at 09:13:17PM +0100, Michael Walle wrote:
> Add device tree files for the Kontron SMARC-sAL28 board and its
> carriers.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 4 +
> .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 27 +++
> .../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 73 ++++++++
> .../fsl-ls1028a-kontron-sl28-var4.dts | 34 ++++
> .../freescale/fsl-ls1028a-kontron-sl28.dts | 158 ++++++++++++++++++
> 5 files changed, 296 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 93fce8f0c66d..080c5a59d6bd 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -4,6 +4,10 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
> new file mode 100644
> index 000000000000..97e72c94b7fc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Device Tree File for the Kontron KBox A-230-LS.
> + *
> + * This consists of a Kontron SMARC-sAL28 (Dual PHY) and a special
> + * carrier (s1914).
> + *
> + * Copyright (C) 2019 Michael Walle <michael@walle.cc>
> + *
> + */
> +
> +/dts-v1/;
> +#include "fsl-ls1028a-kontron-sl28-var4.dts"
> +
> +/ {
> + model = "Kontron KBox A-230-LS";
> + compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var3",
> + "kontron,sl28", "fsl,ls1028a";
Any new compatible needs to be documented.
> +};
> +
> +&i2c4 {
> + eeprom@50 {
> + compatible = "atmel,24c32";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
> new file mode 100644
> index 000000000000..a4640e6b3928
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
> @@ -0,0 +1,73 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Device Tree file for the Kontron SMARC-sAL28 board on a SMARC Eval 2.0
> + * carrier (ADS2).
> + *
> + * Copyright (C) 2019 Michael Walle <michael@walle.cc>
> + *
> + */
> +
> +/dts-v1/;
> +#include "fsl-ls1028a-kontron-sl28.dts"
> +
> +/ {
> + model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
> + compatible = "kontron,sl28-var3-ads2", "kontron,sl28", "fsl,ls1028a";
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,widgets =
> + "Headphone", "Headphone Jack",
> + "Line", "Line Out Jack";
> + simple-audio-card,routing =
> + "Line Out Jack", "LINEOUTR",
> + "Line Out Jack", "LINEOUTL",
> + "Headphone Jack", "HPOUTR",
> + "Headphone Jack", "HPOUTL";
> + simple-audio-card,mclk-fs = <256>;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai6>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&wm8904>;
> + frame-master;
> + bitclock-master;
> + };
> + };
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + wm8904: wm8904@1a {
audio-codec for node name.
> + #sound-dai-cells = <0>;
> + compatible = "wlf,wm8904";
> + reg = <0x1a>;
> + clocks = <&wm8904_mclk>;
> + clock-names = "mclk";
> + assigned-clocks = <&wm8904_mclk>;
> + assigned-clock-rates = <1250000>;
> + };
> +
> + eeprom@50 {
> + compatible = "atmel,24c32";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +};
> +
> +&sai6 {
> + status = "okay";
> +};
> +
> +&soc {
> + wm8904_mclk: wm8904-mclk@f130080 {
> + compatible = "fsl,vf610-sai-clock";
Unsupported/undocumented binding?
> + reg = <0x0 0xf130080 0x0 0x80>;
> + clocks = <&clockgen 4 1>;
> + #clock-cells = <0>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
> new file mode 100644
> index 000000000000..5c8b13108e4d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Device Tree file for the Kontron SMARC-sAL28 board.
> + *
> + * This is for the network variant 4 which has two ethernet ports. It
> + * extends the base and provides one more port connected via RGMII.
> + *
> + * Copyright (C) 2019 Michael Walle <michael@walle.cc>
> + *
> + */
> +
> +/dts-v1/;
> +#include "fsl-ls1028a-kontron-sl28.dts"
> +
> +/ {
> + model = "Kontron SMARC-sAL28 (Dual PHY)";
> + compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
> +};
> +
> +&enetc_port1 {
> + phy-handle = <&phy1>;
> + phy-connection-type = "rgmii-id";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy1: ethernet-phy@4 {
> + reg = <0x4>;
> + eee-broken-1000t;
> + eee-broken-100tx;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> new file mode 100644
> index 000000000000..a18cb4395ad0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Device Tree file for the Kontron SMARC-sAL28 board.
> + *
> + * Copyright (C) 2019 Michael Walle <michael@walle.cc>
> + *
> + */
> +
> +/dts-v1/;
> +#include "fsl-ls1028a.dtsi"
> +
> +/ {
> + model = "Kontron SMARC-sAL28";
> + compatible = "kontron,sl28", "fsl,ls1028a";
> +
> + aliases {
> + crypto = &crypto;
> + serial0 = &duart0;
> + serial1 = &duart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&duart0 {
> + status = "okay";
> +};
> +
> +&duart1 {
> + status = "okay";
> +};
> +
> +&enetc_port0 {
> + phy-handle = <&phy0>;
> + phy-connection-type = "sgmii";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy0: ethernet-phy@5 {
> + reg = <0x5>;
> + eee-broken-1000t;
> + eee-broken-100tx;
> + };
> + };
> +};
> +
> +&esdhc {
> + sd-uhs-sdr104;
> + sd-uhs-sdr50;
> + sd-uhs-sdr25;
> + sd-uhs-sdr12;
> + status = "okay";
> +};
> +
> +&esdhc1 {
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + bus-width = <8>;
> + status = "okay";
> +};
> +
> +&fspi {
> + status = "okay";
> +
> + w25q32jw@0 {
Use a generic node name.
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q32jw", "jedec,spi-nor";
Is "w25q32jw" documented somewhere?
Shawn
> + m25p,fast-read;
> + spi-max-frequency = <133000000>;
> + reg = <0>;
> + /* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
> + spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
> + spi-tx-bus-width = <1>; /* 1 SPI Tx line */
> +
> + partition@0 {
> + reg = <0x000000 0x010000>;
> + label = "rcw";
> + read-only;
> + };
> +
> + partition@10000 {
> + reg = <0x010000 0x0f0000>;
> + label = "failsafe bootloader";
> + read-only;
> + };
> +
> + partition@100000 {
> + reg = <0x100000 0x040000>;
> + label = "failsafe DP firmware";
> + read-only;
> + };
> +
> + partition@140000 {
> + reg = <0x140000 0x0a0000>;
> + label = "failsafe trusted firmware";
> + read-only;
> + };
> +
> + partition@1e0000 {
> + reg = <0x1e0000 0x020000>;
> + label = "reserved";
> + read-only;
> + };
> +
> + partition@200000 {
> + reg = <0x200000 0x010000>;
> + label = "configuration store";
> + };
> +
> + partition@210000 {
> + reg = <0x210000 0x0f0000>;
> + label = "bootloader";
> + };
> +
> + partition@300000 {
> + reg = <0x300000 0x040000>;
> + label = "DP firmware";
> + };
> +
> + partition@340000 {
> + reg = <0x340000 0x0a0000>;
> + label = "trusted firmware";
> + };
> +
> + partition@3e0000 {
> + reg = <0x3e0000 0x020000>;
> + label = "bootloader environment";
> + };
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + rtc@32 {
> + compatible = "microcrystal,rv8803";
> + reg = <0x32>;
> + };
> +
> + eeprom@50 {
> + compatible = "atmel,24c32";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> --
> 2.20.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Michael Walle <michael@walle.cc>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: Re: [PATCH 4/4] arm64: dts: freescale: add Kontron sl28 support
Date: Mon, 9 Dec 2019 14:43:58 +0800 [thread overview]
Message-ID: <20191209064356.GD3365@dragon> (raw)
In-Reply-To: <20191123201317.25861-5-michael@walle.cc>
On Sat, Nov 23, 2019 at 09:13:17PM +0100, Michael Walle wrote:
> Add device tree files for the Kontron SMARC-sAL28 board and its
> carriers.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 4 +
> .../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 27 +++
> .../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 73 ++++++++
> .../fsl-ls1028a-kontron-sl28-var4.dts | 34 ++++
> .../freescale/fsl-ls1028a-kontron-sl28.dts | 158 ++++++++++++++++++
> 5 files changed, 296 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 93fce8f0c66d..080c5a59d6bd 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -4,6 +4,10 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
> new file mode 100644
> index 000000000000..97e72c94b7fc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Device Tree File for the Kontron KBox A-230-LS.
> + *
> + * This consists of a Kontron SMARC-sAL28 (Dual PHY) and a special
> + * carrier (s1914).
> + *
> + * Copyright (C) 2019 Michael Walle <michael@walle.cc>
> + *
> + */
> +
> +/dts-v1/;
> +#include "fsl-ls1028a-kontron-sl28-var4.dts"
> +
> +/ {
> + model = "Kontron KBox A-230-LS";
> + compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var3",
> + "kontron,sl28", "fsl,ls1028a";
Any new compatible needs to be documented.
> +};
> +
> +&i2c4 {
> + eeprom@50 {
> + compatible = "atmel,24c32";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
> new file mode 100644
> index 000000000000..a4640e6b3928
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
> @@ -0,0 +1,73 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Device Tree file for the Kontron SMARC-sAL28 board on a SMARC Eval 2.0
> + * carrier (ADS2).
> + *
> + * Copyright (C) 2019 Michael Walle <michael@walle.cc>
> + *
> + */
> +
> +/dts-v1/;
> +#include "fsl-ls1028a-kontron-sl28.dts"
> +
> +/ {
> + model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
> + compatible = "kontron,sl28-var3-ads2", "kontron,sl28", "fsl,ls1028a";
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,widgets =
> + "Headphone", "Headphone Jack",
> + "Line", "Line Out Jack";
> + simple-audio-card,routing =
> + "Line Out Jack", "LINEOUTR",
> + "Line Out Jack", "LINEOUTL",
> + "Headphone Jack", "HPOUTR",
> + "Headphone Jack", "HPOUTL";
> + simple-audio-card,mclk-fs = <256>;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai6>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&wm8904>;
> + frame-master;
> + bitclock-master;
> + };
> + };
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + wm8904: wm8904@1a {
audio-codec for node name.
> + #sound-dai-cells = <0>;
> + compatible = "wlf,wm8904";
> + reg = <0x1a>;
> + clocks = <&wm8904_mclk>;
> + clock-names = "mclk";
> + assigned-clocks = <&wm8904_mclk>;
> + assigned-clock-rates = <1250000>;
> + };
> +
> + eeprom@50 {
> + compatible = "atmel,24c32";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +};
> +
> +&sai6 {
> + status = "okay";
> +};
> +
> +&soc {
> + wm8904_mclk: wm8904-mclk@f130080 {
> + compatible = "fsl,vf610-sai-clock";
Unsupported/undocumented binding?
> + reg = <0x0 0xf130080 0x0 0x80>;
> + clocks = <&clockgen 4 1>;
> + #clock-cells = <0>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
> new file mode 100644
> index 000000000000..5c8b13108e4d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Device Tree file for the Kontron SMARC-sAL28 board.
> + *
> + * This is for the network variant 4 which has two ethernet ports. It
> + * extends the base and provides one more port connected via RGMII.
> + *
> + * Copyright (C) 2019 Michael Walle <michael@walle.cc>
> + *
> + */
> +
> +/dts-v1/;
> +#include "fsl-ls1028a-kontron-sl28.dts"
> +
> +/ {
> + model = "Kontron SMARC-sAL28 (Dual PHY)";
> + compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
> +};
> +
> +&enetc_port1 {
> + phy-handle = <&phy1>;
> + phy-connection-type = "rgmii-id";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy1: ethernet-phy@4 {
> + reg = <0x4>;
> + eee-broken-1000t;
> + eee-broken-100tx;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> new file mode 100644
> index 000000000000..a18cb4395ad0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Device Tree file for the Kontron SMARC-sAL28 board.
> + *
> + * Copyright (C) 2019 Michael Walle <michael@walle.cc>
> + *
> + */
> +
> +/dts-v1/;
> +#include "fsl-ls1028a.dtsi"
> +
> +/ {
> + model = "Kontron SMARC-sAL28";
> + compatible = "kontron,sl28", "fsl,ls1028a";
> +
> + aliases {
> + crypto = &crypto;
> + serial0 = &duart0;
> + serial1 = &duart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&duart0 {
> + status = "okay";
> +};
> +
> +&duart1 {
> + status = "okay";
> +};
> +
> +&enetc_port0 {
> + phy-handle = <&phy0>;
> + phy-connection-type = "sgmii";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy0: ethernet-phy@5 {
> + reg = <0x5>;
> + eee-broken-1000t;
> + eee-broken-100tx;
> + };
> + };
> +};
> +
> +&esdhc {
> + sd-uhs-sdr104;
> + sd-uhs-sdr50;
> + sd-uhs-sdr25;
> + sd-uhs-sdr12;
> + status = "okay";
> +};
> +
> +&esdhc1 {
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + bus-width = <8>;
> + status = "okay";
> +};
> +
> +&fspi {
> + status = "okay";
> +
> + w25q32jw@0 {
Use a generic node name.
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q32jw", "jedec,spi-nor";
Is "w25q32jw" documented somewhere?
Shawn
> + m25p,fast-read;
> + spi-max-frequency = <133000000>;
> + reg = <0>;
> + /* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
> + spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
> + spi-tx-bus-width = <1>; /* 1 SPI Tx line */
> +
> + partition@0 {
> + reg = <0x000000 0x010000>;
> + label = "rcw";
> + read-only;
> + };
> +
> + partition@10000 {
> + reg = <0x010000 0x0f0000>;
> + label = "failsafe bootloader";
> + read-only;
> + };
> +
> + partition@100000 {
> + reg = <0x100000 0x040000>;
> + label = "failsafe DP firmware";
> + read-only;
> + };
> +
> + partition@140000 {
> + reg = <0x140000 0x0a0000>;
> + label = "failsafe trusted firmware";
> + read-only;
> + };
> +
> + partition@1e0000 {
> + reg = <0x1e0000 0x020000>;
> + label = "reserved";
> + read-only;
> + };
> +
> + partition@200000 {
> + reg = <0x200000 0x010000>;
> + label = "configuration store";
> + };
> +
> + partition@210000 {
> + reg = <0x210000 0x0f0000>;
> + label = "bootloader";
> + };
> +
> + partition@300000 {
> + reg = <0x300000 0x040000>;
> + label = "DP firmware";
> + };
> +
> + partition@340000 {
> + reg = <0x340000 0x0a0000>;
> + label = "trusted firmware";
> + };
> +
> + partition@3e0000 {
> + reg = <0x3e0000 0x020000>;
> + label = "bootloader environment";
> + };
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + rtc@32 {
> + compatible = "microcrystal,rv8803";
> + reg = <0x32>;
> + };
> +
> + eeprom@50 {
> + compatible = "atmel,24c32";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> --
> 2.20.1
>
next prev parent reply other threads:[~2019-12-09 6:44 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-23 20:13 [PATCH 0/4] ls1028a: dts fixes and new board support Michael Walle
2019-11-23 20:13 ` Michael Walle
2019-11-23 20:13 ` [PATCH 1/4] arm64: dts: ls1028a: fix typo in TMU calibration data Michael Walle
2019-11-23 20:13 ` Michael Walle
2019-12-09 6:24 ` Shawn Guo
2019-12-09 6:24 ` Shawn Guo
2019-12-09 6:39 ` [EXT] " Andy Tang
2019-12-09 6:39 ` Andy Tang
2019-12-09 8:41 ` Michael Walle
2019-12-09 8:41 ` Michael Walle
2019-11-23 20:13 ` [PATCH 2/4] arm64: dts: ls1028a: add missing sai nodes Michael Walle
2019-11-23 20:13 ` Michael Walle
2019-12-09 6:31 ` Shawn Guo
2019-12-09 6:31 ` Shawn Guo
2019-11-23 20:13 ` [PATCH 3/4] arm64: dts: ls1028a: add FlexSPI node Michael Walle
2019-11-23 20:13 ` Michael Walle
2019-11-26 6:40 ` [EXT] " Kuldeep Singh
2019-11-26 6:40 ` Kuldeep Singh
2019-11-26 10:08 ` Michael Walle
2019-11-26 10:08 ` Michael Walle
2019-12-02 5:43 ` Kuldeep Singh
2019-12-02 5:43 ` Kuldeep Singh
2019-11-23 20:13 ` [PATCH 4/4] arm64: dts: freescale: add Kontron sl28 support Michael Walle
2019-11-23 20:13 ` Michael Walle
2019-12-09 6:43 ` Shawn Guo [this message]
2019-12-09 6:43 ` Shawn Guo
2019-12-09 8:54 ` Michael Walle
2019-12-09 8:54 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191209064356.GD3365@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michael@walle.cc \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.