* [PATCH v2 1/3] dt-bindings: Add vendor prefix for Satoz @ 2019-12-24 14:05 ` Miquel Raynal 0 siblings, 0 replies; 8+ messages in thread From: Miquel Raynal @ 2019-12-24 14:05 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel, dri-devel, Paul Kocialkowski, Maxime Chevallier, Thomas Petazzoni, Miquel Raynal, Rob Herring Satoz is a Chinese TFT manufacturer. Website: http://www.sat-sz.com/English/index.html Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> --- Changes since v1: * Added Rob's Ack. Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 967e78c5ec0a..4894c5314b49 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -819,6 +819,8 @@ patternProperties: description: Sancloud Ltd "^sandisk,.*": description: Sandisk Corporation + "^satoz,.*": + description: Satoz International Co., Ltd "^sbs,.*": description: Smart Battery System "^schindler,.*": -- 2.20.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 1/3] dt-bindings: Add vendor prefix for Satoz @ 2019-12-24 14:05 ` Miquel Raynal 0 siblings, 0 replies; 8+ messages in thread From: Miquel Raynal @ 2019-12-24 14:05 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter Cc: Mark Rutland, devicetree, linux-kernel, dri-devel, Maxime Chevallier, Paul Kocialkowski, Rob Herring, Thomas Petazzoni, Miquel Raynal Satoz is a Chinese TFT manufacturer. Website: http://www.sat-sz.com/English/index.html Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> --- Changes since v1: * Added Rob's Ack. Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 967e78c5ec0a..4894c5314b49 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -819,6 +819,8 @@ patternProperties: description: Sancloud Ltd "^sandisk,.*": description: Sandisk Corporation + "^satoz,.*": + description: Satoz International Co., Ltd "^sbs,.*": description: Smart Battery System "^schindler,.*": -- 2.20.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 2/3] dt-bindings: display: Add Satoz panel 2019-12-24 14:05 ` Miquel Raynal @ 2019-12-24 14:05 ` Miquel Raynal -1 siblings, 0 replies; 8+ messages in thread From: Miquel Raynal @ 2019-12-24 14:05 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel, dri-devel, Paul Kocialkowski, Maxime Chevallier, Thomas Petazzoni, Miquel Raynal Satoz is a Chinese TFT manufacturer. Website: http://www.sat-sz.com/English/index.html Add (simple) bindings for its SAT050AT40H12R2 5.0 inch LCD panel. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- Changes since v1: * New patch .../display/panel/satoz,sat050at40h12r2.yaml | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/satoz,sat050at40h12r2.yaml diff --git a/Documentation/devicetree/bindings/display/panel/satoz,sat050at40h12r2.yaml b/Documentation/devicetree/bindings/display/panel/satoz,sat050at40h12r2.yaml new file mode 100644 index 000000000000..567b32a544f3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/satoz,sat050at40h12r2.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/satoz,sat050at40h12r2# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Satoz SAT050AT40H12R2 panel + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + +description: |+ + LCD 5.0 inch 800x480 RGB panel. + + This binding is compatible with the simple-panel binding, which is specified + in simple-panel.txt in this directory. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + contains: + const: satoz,sat050at40h12r2 + +required: + - compatible -- 2.20.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 2/3] dt-bindings: display: Add Satoz panel @ 2019-12-24 14:05 ` Miquel Raynal 0 siblings, 0 replies; 8+ messages in thread From: Miquel Raynal @ 2019-12-24 14:05 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter Cc: Mark Rutland, devicetree, linux-kernel, dri-devel, Maxime Chevallier, Paul Kocialkowski, Rob Herring, Thomas Petazzoni, Miquel Raynal Satoz is a Chinese TFT manufacturer. Website: http://www.sat-sz.com/English/index.html Add (simple) bindings for its SAT050AT40H12R2 5.0 inch LCD panel. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- Changes since v1: * New patch .../display/panel/satoz,sat050at40h12r2.yaml | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/satoz,sat050at40h12r2.yaml diff --git a/Documentation/devicetree/bindings/display/panel/satoz,sat050at40h12r2.yaml b/Documentation/devicetree/bindings/display/panel/satoz,sat050at40h12r2.yaml new file mode 100644 index 000000000000..567b32a544f3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/satoz,sat050at40h12r2.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/satoz,sat050at40h12r2# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Satoz SAT050AT40H12R2 panel + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + +description: |+ + LCD 5.0 inch 800x480 RGB panel. + + This binding is compatible with the simple-panel binding, which is specified + in simple-panel.txt in this directory. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + contains: + const: satoz,sat050at40h12r2 + +required: + - compatible -- 2.20.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 3/3] drm/panel: simple: Add Satoz SAT050AT40H12R2 panel support 2019-12-24 14:05 ` Miquel Raynal @ 2019-12-24 14:05 ` Miquel Raynal -1 siblings, 0 replies; 8+ messages in thread From: Miquel Raynal @ 2019-12-24 14:05 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel, dri-devel, Paul Kocialkowski, Maxime Chevallier, Thomas Petazzoni, Miquel Raynal Add support for the Satoz SAT050AT40H12R2 RGB panel. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- Changes since v1: * Switched to display_timing's instead of display_mode. drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index ac6f6b5d200d..00538553a188 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2559,6 +2559,31 @@ static const struct panel_desc samsung_ltn140at29_301 = { }, }; +static const struct display_timing satoz_sat050at40h12r2_timing = { + .pixelclock = { 33300000, 33300000, 50000000 }, + .hactive = {800, 800, 800}, + .hfront_porch = {16, 210, 354}, + .hback_porch = {46, 46, 46}, + .hsync_len = {1, 1, 40}, + .vactive = {480, 480, 480}, + .vfront_porch = {7, 22, 147}, + .vback_porch = {23, 23, 23}, + .vsync_len = {1, 1, 20}, +}; + +static const struct panel_desc satoz_sat050at40h12r2 = { + .timings = &satoz_sat050at40h12r2_timing, + .num_timings = 1, + .bpc = 8, + .size = { + .width = 108, + .height = 65, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .reset_time = 10, + .reset_wait = 1, +}; + static const struct drm_display_mode sharp_ld_d5116z01b_mode = { .clock = 168480, .hdisplay = 1920, @@ -3354,6 +3379,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "samsung,ltn140at29-301", .data = &samsung_ltn140at29_301, + }, { + .compatible = "satoz,sat050at40h12r2", + .data = &satoz_sat050at40h12r2, }, { .compatible = "sharp,ld-d5116z01b", .data = &sharp_ld_d5116z01b, -- 2.20.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 3/3] drm/panel: simple: Add Satoz SAT050AT40H12R2 panel support @ 2019-12-24 14:05 ` Miquel Raynal 0 siblings, 0 replies; 8+ messages in thread From: Miquel Raynal @ 2019-12-24 14:05 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter Cc: Mark Rutland, devicetree, linux-kernel, dri-devel, Maxime Chevallier, Paul Kocialkowski, Rob Herring, Thomas Petazzoni, Miquel Raynal Add support for the Satoz SAT050AT40H12R2 RGB panel. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- Changes since v1: * Switched to display_timing's instead of display_mode. drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index ac6f6b5d200d..00538553a188 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2559,6 +2559,31 @@ static const struct panel_desc samsung_ltn140at29_301 = { }, }; +static const struct display_timing satoz_sat050at40h12r2_timing = { + .pixelclock = { 33300000, 33300000, 50000000 }, + .hactive = {800, 800, 800}, + .hfront_porch = {16, 210, 354}, + .hback_porch = {46, 46, 46}, + .hsync_len = {1, 1, 40}, + .vactive = {480, 480, 480}, + .vfront_porch = {7, 22, 147}, + .vback_porch = {23, 23, 23}, + .vsync_len = {1, 1, 20}, +}; + +static const struct panel_desc satoz_sat050at40h12r2 = { + .timings = &satoz_sat050at40h12r2_timing, + .num_timings = 1, + .bpc = 8, + .size = { + .width = 108, + .height = 65, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .reset_time = 10, + .reset_wait = 1, +}; + static const struct drm_display_mode sharp_ld_d5116z01b_mode = { .clock = 168480, .hdisplay = 1920, @@ -3354,6 +3379,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "samsung,ltn140at29-301", .data = &samsung_ltn140at29_301, + }, { + .compatible = "satoz,sat050at40h12r2", + .data = &satoz_sat050at40h12r2, }, { .compatible = "sharp,ld-d5116z01b", .data = &sharp_ld_d5116z01b, -- 2.20.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2 3/3] drm/panel: simple: Add Satoz SAT050AT40H12R2 panel support 2019-12-24 14:05 ` Miquel Raynal @ 2019-12-24 14:12 ` Miquel Raynal -1 siblings, 0 replies; 8+ messages in thread From: Miquel Raynal @ 2019-12-24 14:12 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter Cc: Rob Herring, Mark Rutland, devicetree, linux-kernel, dri-devel, Paul Kocialkowski, Maxime Chevallier, Thomas Petazzoni Hello, Miquel Raynal <miquel.raynal@bootlin.com> wrote on Tue, 24 Dec 2019 15:05:51 +0100: > Add support for the Satoz SAT050AT40H12R2 RGB panel. > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > > Changes since v1: > * Switched to display_timing's instead of display_mode. > > drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > index ac6f6b5d200d..00538553a188 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -2559,6 +2559,31 @@ static const struct panel_desc samsung_ltn140at29_301 = { > }, > }; > > +static const struct display_timing satoz_sat050at40h12r2_timing = { > + .pixelclock = { 33300000, 33300000, 50000000 }, > + .hactive = {800, 800, 800}, > + .hfront_porch = {16, 210, 354}, > + .hback_porch = {46, 46, 46}, > + .hsync_len = {1, 1, 40}, > + .vactive = {480, 480, 480}, > + .vfront_porch = {7, 22, 147}, > + .vback_porch = {23, 23, 23}, > + .vsync_len = {1, 1, 20}, > +}; > + > +static const struct panel_desc satoz_sat050at40h12r2 = { > + .timings = &satoz_sat050at40h12r2_timing, > + .num_timings = 1, > + .bpc = 8, > + .size = { > + .width = 108, > + .height = 65, > + }, > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, > + .reset_time = 10, > + .reset_wait = 1, I dit not generate the patch from the right branch: this is a proposal for the reset GPIO change and should not appear here. Please forget about this series, I will respin a v3 without these two lines. Sorry for the noise. Thanks, Miquèl ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2 3/3] drm/panel: simple: Add Satoz SAT050AT40H12R2 panel support @ 2019-12-24 14:12 ` Miquel Raynal 0 siblings, 0 replies; 8+ messages in thread From: Miquel Raynal @ 2019-12-24 14:12 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter Cc: Mark Rutland, devicetree, linux-kernel, dri-devel, Maxime Chevallier, Paul Kocialkowski, Rob Herring, Thomas Petazzoni Hello, Miquel Raynal <miquel.raynal@bootlin.com> wrote on Tue, 24 Dec 2019 15:05:51 +0100: > Add support for the Satoz SAT050AT40H12R2 RGB panel. > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > > Changes since v1: > * Switched to display_timing's instead of display_mode. > > drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > index ac6f6b5d200d..00538553a188 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -2559,6 +2559,31 @@ static const struct panel_desc samsung_ltn140at29_301 = { > }, > }; > > +static const struct display_timing satoz_sat050at40h12r2_timing = { > + .pixelclock = { 33300000, 33300000, 50000000 }, > + .hactive = {800, 800, 800}, > + .hfront_porch = {16, 210, 354}, > + .hback_porch = {46, 46, 46}, > + .hsync_len = {1, 1, 40}, > + .vactive = {480, 480, 480}, > + .vfront_porch = {7, 22, 147}, > + .vback_porch = {23, 23, 23}, > + .vsync_len = {1, 1, 20}, > +}; > + > +static const struct panel_desc satoz_sat050at40h12r2 = { > + .timings = &satoz_sat050at40h12r2_timing, > + .num_timings = 1, > + .bpc = 8, > + .size = { > + .width = 108, > + .height = 65, > + }, > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, > + .reset_time = 10, > + .reset_wait = 1, I dit not generate the patch from the right branch: this is a proposal for the reset GPIO change and should not appear here. Please forget about this series, I will respin a v3 without these two lines. Sorry for the noise. Thanks, Miquèl _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-12-24 14:31 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-12-24 14:05 [PATCH v2 1/3] dt-bindings: Add vendor prefix for Satoz Miquel Raynal 2019-12-24 14:05 ` Miquel Raynal 2019-12-24 14:05 ` [PATCH v2 2/3] dt-bindings: display: Add Satoz panel Miquel Raynal 2019-12-24 14:05 ` Miquel Raynal 2019-12-24 14:05 ` [PATCH v2 3/3] drm/panel: simple: Add Satoz SAT050AT40H12R2 panel support Miquel Raynal 2019-12-24 14:05 ` Miquel Raynal 2019-12-24 14:12 ` Miquel Raynal 2019-12-24 14:12 ` Miquel Raynal
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.