From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Maxime Ripard <mripard@kernel.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 2/2] phy: Enable compile testing for some of drivers
Date: Mon, 30 Dec 2019 18:24:49 +0100 [thread overview]
Message-ID: <20191230172449.17648-2-krzk@kernel.org> (raw)
In-Reply-To: <20191230172449.17648-1-krzk@kernel.org>
Some of the phy drivers can be compile tested to increase build
coverage.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/phy/allwinner/Kconfig | 3 ++-
drivers/phy/marvell/Kconfig | 8 +++++---
drivers/phy/mediatek/Kconfig | 9 ++++++---
drivers/phy/samsung/Kconfig | 8 ++++----
drivers/phy/ti/Kconfig | 4 ++--
5 files changed, 19 insertions(+), 13 deletions(-)
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
index 3dab79e9d52b..e760d89d3976 100644
--- a/drivers/phy/allwinner/Kconfig
+++ b/drivers/phy/allwinner/Kconfig
@@ -48,7 +48,8 @@ config PHY_SUN9I_USB
config PHY_SUN50I_USB3
tristate "Allwinner H6 SoC USB3 PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on ARCH_SUNXI || COMPILE_TEST
+ depends on HAS_IOMEM && OF
depends on RESET_CONTROLLER
select GENERIC_PHY
help
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 005e02dd4a91..8f6273c837ec 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -10,14 +10,16 @@ config ARMADA375_USBCLUSTER_PHY
config PHY_BERLIN_SATA
tristate "Marvell Berlin SATA PHY driver"
- depends on ARCH_BERLIN && HAS_IOMEM && OF
+ depends on ARCH_BERLIN || COMPILE_TEST
+ depends on OF && HAS_IOMEM
select GENERIC_PHY
help
Enable this to support the SATA PHY on Marvell Berlin SoCs.
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+ depends on ARCH_BERLIN || COMPILE_TEST
+ depends on OF && HAS_IOMEM && RESET_CONTROLLER
select GENERIC_PHY
help
Enable this to support the USB PHY on Marvell Berlin SoCs.
@@ -95,7 +97,7 @@ config PHY_PXA_28NM_USB2
config PHY_PXA_USB
tristate "Marvell PXA USB PHY Driver"
- depends on ARCH_PXA || ARCH_MMP
+ depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
select GENERIC_PHY
help
Enable this to support Marvell PXA USB PHY driver for Marvell
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 7d19134c6b7c..dee757c957f2 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -4,7 +4,8 @@
#
config PHY_MTK_TPHY
tristate "MediaTek T-PHY Driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Say 'Y' here to add support for MediaTek T-PHY driver,
@@ -16,7 +17,8 @@ config PHY_MTK_TPHY
config PHY_MTK_UFS
tristate "MediaTek UFS M-PHY driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Support for UFS M-PHY on MediaTek chipsets.
@@ -26,7 +28,8 @@ config PHY_MTK_UFS
config PHY_MTK_XSPHY
tristate "MediaTek XS-PHY Driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Enable this to support the SuperSpeedPlus XS-PHY transceiver for
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index 290a6c70f570..349fcb23e5f3 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -32,7 +32,7 @@ config PHY_EXYNOS_PCIE
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
depends on HAS_IOMEM
- depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
default ARCH_EXYNOS
@@ -60,7 +60,7 @@ config PHY_EXYNOS5250_USB2
config PHY_S5PV210_USB2
bool "Support for S5PV210"
depends on PHY_SAMSUNG_USB2
- depends on ARCH_S5PV210
+ depends on ARCH_S5PV210 || COMPILE_TEST
help
Enable USB PHY support for S5PV210. This option requires that Samsung
USB 2.0 PHY driver is enabled and means that support for this
@@ -69,7 +69,7 @@ config PHY_S5PV210_USB2
config PHY_EXYNOS5_USBDRD
tristate "Exynos5 SoC series USB DRD PHY driver"
- depends on ARCH_EXYNOS && OF
+ depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
depends on HAS_IOMEM
depends on USB_DWC3_EXYNOS
select GENERIC_PHY
@@ -82,7 +82,7 @@ config PHY_EXYNOS5_USBDRD
config PHY_EXYNOS5250_SATA
tristate "Exynos5250 Sata SerDes/PHY driver"
- depends on SOC_EXYNOS5250
+ depends on SOC_EXYNOS5250 || COMPILE_TEST
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 174888609779..e231c0e369c5 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -4,7 +4,7 @@
#
config PHY_DA8XX_USB
tristate "TI DA8xx USB PHY Driver"
- depends on ARCH_DAVINCI_DA8XX
+ depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
help
@@ -14,7 +14,7 @@ config PHY_DA8XX_USB
config PHY_DM816X_USB
tristate "TI dm816x USB PHY driver"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on USB_SUPPORT
select GENERIC_PHY
select USB_PHY
--
2.17.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Maxime Ripard <mripard@kernel.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 2/2] phy: Enable compile testing for some of drivers
Date: Mon, 30 Dec 2019 18:24:49 +0100 [thread overview]
Message-ID: <20191230172449.17648-2-krzk@kernel.org> (raw)
In-Reply-To: <20191230172449.17648-1-krzk@kernel.org>
Some of the phy drivers can be compile tested to increase build
coverage.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/phy/allwinner/Kconfig | 3 ++-
drivers/phy/marvell/Kconfig | 8 +++++---
drivers/phy/mediatek/Kconfig | 9 ++++++---
drivers/phy/samsung/Kconfig | 8 ++++----
drivers/phy/ti/Kconfig | 4 ++--
5 files changed, 19 insertions(+), 13 deletions(-)
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
index 3dab79e9d52b..e760d89d3976 100644
--- a/drivers/phy/allwinner/Kconfig
+++ b/drivers/phy/allwinner/Kconfig
@@ -48,7 +48,8 @@ config PHY_SUN9I_USB
config PHY_SUN50I_USB3
tristate "Allwinner H6 SoC USB3 PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on ARCH_SUNXI || COMPILE_TEST
+ depends on HAS_IOMEM && OF
depends on RESET_CONTROLLER
select GENERIC_PHY
help
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 005e02dd4a91..8f6273c837ec 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -10,14 +10,16 @@ config ARMADA375_USBCLUSTER_PHY
config PHY_BERLIN_SATA
tristate "Marvell Berlin SATA PHY driver"
- depends on ARCH_BERLIN && HAS_IOMEM && OF
+ depends on ARCH_BERLIN || COMPILE_TEST
+ depends on OF && HAS_IOMEM
select GENERIC_PHY
help
Enable this to support the SATA PHY on Marvell Berlin SoCs.
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+ depends on ARCH_BERLIN || COMPILE_TEST
+ depends on OF && HAS_IOMEM && RESET_CONTROLLER
select GENERIC_PHY
help
Enable this to support the USB PHY on Marvell Berlin SoCs.
@@ -95,7 +97,7 @@ config PHY_PXA_28NM_USB2
config PHY_PXA_USB
tristate "Marvell PXA USB PHY Driver"
- depends on ARCH_PXA || ARCH_MMP
+ depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
select GENERIC_PHY
help
Enable this to support Marvell PXA USB PHY driver for Marvell
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 7d19134c6b7c..dee757c957f2 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -4,7 +4,8 @@
#
config PHY_MTK_TPHY
tristate "MediaTek T-PHY Driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Say 'Y' here to add support for MediaTek T-PHY driver,
@@ -16,7 +17,8 @@ config PHY_MTK_TPHY
config PHY_MTK_UFS
tristate "MediaTek UFS M-PHY driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Support for UFS M-PHY on MediaTek chipsets.
@@ -26,7 +28,8 @@ config PHY_MTK_UFS
config PHY_MTK_XSPHY
tristate "MediaTek XS-PHY Driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Enable this to support the SuperSpeedPlus XS-PHY transceiver for
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index 290a6c70f570..349fcb23e5f3 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -32,7 +32,7 @@ config PHY_EXYNOS_PCIE
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
depends on HAS_IOMEM
- depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
default ARCH_EXYNOS
@@ -60,7 +60,7 @@ config PHY_EXYNOS5250_USB2
config PHY_S5PV210_USB2
bool "Support for S5PV210"
depends on PHY_SAMSUNG_USB2
- depends on ARCH_S5PV210
+ depends on ARCH_S5PV210 || COMPILE_TEST
help
Enable USB PHY support for S5PV210. This option requires that Samsung
USB 2.0 PHY driver is enabled and means that support for this
@@ -69,7 +69,7 @@ config PHY_S5PV210_USB2
config PHY_EXYNOS5_USBDRD
tristate "Exynos5 SoC series USB DRD PHY driver"
- depends on ARCH_EXYNOS && OF
+ depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
depends on HAS_IOMEM
depends on USB_DWC3_EXYNOS
select GENERIC_PHY
@@ -82,7 +82,7 @@ config PHY_EXYNOS5_USBDRD
config PHY_EXYNOS5250_SATA
tristate "Exynos5250 Sata SerDes/PHY driver"
- depends on SOC_EXYNOS5250
+ depends on SOC_EXYNOS5250 || COMPILE_TEST
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 174888609779..e231c0e369c5 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -4,7 +4,7 @@
#
config PHY_DA8XX_USB
tristate "TI DA8xx USB PHY Driver"
- depends on ARCH_DAVINCI_DA8XX
+ depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
help
@@ -14,7 +14,7 @@ config PHY_DA8XX_USB
config PHY_DM816X_USB
tristate "TI dm816x USB PHY driver"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on USB_SUPPORT
select GENERIC_PHY
select USB_PHY
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Maxime Ripard <mripard@kernel.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 2/2] phy: Enable compile testing for some of drivers
Date: Mon, 30 Dec 2019 18:24:49 +0100 [thread overview]
Message-ID: <20191230172449.17648-2-krzk@kernel.org> (raw)
In-Reply-To: <20191230172449.17648-1-krzk@kernel.org>
Some of the phy drivers can be compile tested to increase build
coverage.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/phy/allwinner/Kconfig | 3 ++-
drivers/phy/marvell/Kconfig | 8 +++++---
drivers/phy/mediatek/Kconfig | 9 ++++++---
drivers/phy/samsung/Kconfig | 8 ++++----
drivers/phy/ti/Kconfig | 4 ++--
5 files changed, 19 insertions(+), 13 deletions(-)
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
index 3dab79e9d52b..e760d89d3976 100644
--- a/drivers/phy/allwinner/Kconfig
+++ b/drivers/phy/allwinner/Kconfig
@@ -48,7 +48,8 @@ config PHY_SUN9I_USB
config PHY_SUN50I_USB3
tristate "Allwinner H6 SoC USB3 PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on ARCH_SUNXI || COMPILE_TEST
+ depends on HAS_IOMEM && OF
depends on RESET_CONTROLLER
select GENERIC_PHY
help
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 005e02dd4a91..8f6273c837ec 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -10,14 +10,16 @@ config ARMADA375_USBCLUSTER_PHY
config PHY_BERLIN_SATA
tristate "Marvell Berlin SATA PHY driver"
- depends on ARCH_BERLIN && HAS_IOMEM && OF
+ depends on ARCH_BERLIN || COMPILE_TEST
+ depends on OF && HAS_IOMEM
select GENERIC_PHY
help
Enable this to support the SATA PHY on Marvell Berlin SoCs.
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+ depends on ARCH_BERLIN || COMPILE_TEST
+ depends on OF && HAS_IOMEM && RESET_CONTROLLER
select GENERIC_PHY
help
Enable this to support the USB PHY on Marvell Berlin SoCs.
@@ -95,7 +97,7 @@ config PHY_PXA_28NM_USB2
config PHY_PXA_USB
tristate "Marvell PXA USB PHY Driver"
- depends on ARCH_PXA || ARCH_MMP
+ depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
select GENERIC_PHY
help
Enable this to support Marvell PXA USB PHY driver for Marvell
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 7d19134c6b7c..dee757c957f2 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -4,7 +4,8 @@
#
config PHY_MTK_TPHY
tristate "MediaTek T-PHY Driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Say 'Y' here to add support for MediaTek T-PHY driver,
@@ -16,7 +17,8 @@ config PHY_MTK_TPHY
config PHY_MTK_UFS
tristate "MediaTek UFS M-PHY driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Support for UFS M-PHY on MediaTek chipsets.
@@ -26,7 +28,8 @@ config PHY_MTK_UFS
config PHY_MTK_XSPHY
tristate "MediaTek XS-PHY Driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Enable this to support the SuperSpeedPlus XS-PHY transceiver for
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index 290a6c70f570..349fcb23e5f3 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -32,7 +32,7 @@ config PHY_EXYNOS_PCIE
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
depends on HAS_IOMEM
- depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
default ARCH_EXYNOS
@@ -60,7 +60,7 @@ config PHY_EXYNOS5250_USB2
config PHY_S5PV210_USB2
bool "Support for S5PV210"
depends on PHY_SAMSUNG_USB2
- depends on ARCH_S5PV210
+ depends on ARCH_S5PV210 || COMPILE_TEST
help
Enable USB PHY support for S5PV210. This option requires that Samsung
USB 2.0 PHY driver is enabled and means that support for this
@@ -69,7 +69,7 @@ config PHY_S5PV210_USB2
config PHY_EXYNOS5_USBDRD
tristate "Exynos5 SoC series USB DRD PHY driver"
- depends on ARCH_EXYNOS && OF
+ depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
depends on HAS_IOMEM
depends on USB_DWC3_EXYNOS
select GENERIC_PHY
@@ -82,7 +82,7 @@ config PHY_EXYNOS5_USBDRD
config PHY_EXYNOS5250_SATA
tristate "Exynos5250 Sata SerDes/PHY driver"
- depends on SOC_EXYNOS5250
+ depends on SOC_EXYNOS5250 || COMPILE_TEST
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 174888609779..e231c0e369c5 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -4,7 +4,7 @@
#
config PHY_DA8XX_USB
tristate "TI DA8xx USB PHY Driver"
- depends on ARCH_DAVINCI_DA8XX
+ depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
help
@@ -14,7 +14,7 @@ config PHY_DA8XX_USB
config PHY_DM816X_USB
tristate "TI dm816x USB PHY driver"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on USB_SUPPORT
select GENERIC_PHY
select USB_PHY
--
2.17.1
next prev parent reply other threads:[~2019-12-30 17:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-30 17:24 [PATCH 1/2] phy: mediatek: Fix Kconfig indentation Krzysztof Kozlowski
2019-12-30 17:24 ` Krzysztof Kozlowski
2019-12-30 17:24 ` Krzysztof Kozlowski
2019-12-30 17:24 ` Krzysztof Kozlowski [this message]
2019-12-30 17:24 ` [PATCH 2/2] phy: Enable compile testing for some of drivers Krzysztof Kozlowski
2019-12-30 17:24 ` Krzysztof Kozlowski
2019-12-30 20:10 ` Florian Fainelli
2019-12-30 20:10 ` Florian Fainelli
2019-12-30 20:10 ` Florian Fainelli
2019-12-31 8:20 ` Krzysztof Kozlowski
2019-12-31 8:20 ` Krzysztof Kozlowski
2019-12-31 8:20 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191230172449.17648-2-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=chunfeng.yun@mediatek.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mripard@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.