From: Michael Kao <michael.kao@mediatek.com>
To: Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <edubezval@gmail.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>, <hsinyi@chromium.org>,
<linux-pm@vger.kernel.org>, <srv_heupstream@mediatek.com>
Cc: devicetree@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3,0/8] Add Mediatek thermal dirver and dtsi
Date: Fri, 3 Jan 2020 14:43:59 +0800 [thread overview]
Message-ID: <20200103064407.19861-1-michael.kao@mediatek.com> (raw)
This patchset supports for MT8183 chip to mtk_thermal.c.
Add thermal zone of all the thermal sensor in SoC for
another get temperatrue. They don't need to thermal throttle.
And we bind coolers for thermal zone nodes of cpu_thermal.
Rebase to kernel-5.5-rc1.
Update content:
[1/8]
Update sustainable power of cpu, tzts1~5 and tztsABB.
[7/8]
Bypass the failure that non cpu_thermal sensor is not find in thermal-zones
in dts, which is normal for mt8173, so prompt a warning here instead of
failing.
Return -EAGAIN instead of -EACCESS on the first read of sensor that
often are bogus values. This can avoid following warning on boot:
thermal thermal_zone6: failed to read out thermal zone (-13)
This patch series base on these patches [1][2][3][4].
[1]support for reading chip ID and efuse (https://patchwork.kernel.org/patch/10902131/)
[2]arm64: dts: mt8183: Add reset-cells in infracfg (https://patchwork.kernel.org/patch/10908653/)
[3]clk: reset: Modify reset-controller driver (https://patchwork.kernel.org/patch/10908657/)
[4]PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/10923289/)
Matthias Kaehlcke (2):
arm64: dts: mt8183: Configure CPU cooling
arm64: dts: mt8183: Increase polling frequency for CPU thermal zone
Michael Kao (6):
arm64: dts: mt8183: add thermal zone node
arm64: dts: mt8183: add/update dynamic power coefficients
arm64: dts: mt8183: Add #cooling-cells to CPU nodes
thermal: mediatek: mt8183: fix bank number settings
thermal: mediatek: add another get_temp ops for thermal sensors
thermal: mediatek: use spinlock to protect PTPCORESEL
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 157 +++++++++++++++++++++++
drivers/thermal/mtk_thermal.c | 88 +++++++++++--
2 files changed, 231 insertions(+), 14 deletions(-)
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Michael Kao <michael.kao@mediatek.com>
To: Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <edubezval@gmail.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>, <hsinyi@chromium.org>,
<linux-pm@vger.kernel.org>, <srv_heupstream@mediatek.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>
Subject: [PATCH v3,0/8] Add Mediatek thermal dirver and dtsi
Date: Fri, 3 Jan 2020 14:43:59 +0800 [thread overview]
Message-ID: <20200103064407.19861-1-michael.kao@mediatek.com> (raw)
This patchset supports for MT8183 chip to mtk_thermal.c.
Add thermal zone of all the thermal sensor in SoC for
another get temperatrue. They don't need to thermal throttle.
And we bind coolers for thermal zone nodes of cpu_thermal.
Rebase to kernel-5.5-rc1.
Update content:
[1/8]
Update sustainable power of cpu, tzts1~5 and tztsABB.
[7/8]
Bypass the failure that non cpu_thermal sensor is not find in thermal-zones
in dts, which is normal for mt8173, so prompt a warning here instead of
failing.
Return -EAGAIN instead of -EACCESS on the first read of sensor that
often are bogus values. This can avoid following warning on boot:
thermal thermal_zone6: failed to read out thermal zone (-13)
This patch series base on these patches [1][2][3][4].
[1]support for reading chip ID and efuse (https://patchwork.kernel.org/patch/10902131/)
[2]arm64: dts: mt8183: Add reset-cells in infracfg (https://patchwork.kernel.org/patch/10908653/)
[3]clk: reset: Modify reset-controller driver (https://patchwork.kernel.org/patch/10908657/)
[4]PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/10923289/)
Matthias Kaehlcke (2):
arm64: dts: mt8183: Configure CPU cooling
arm64: dts: mt8183: Increase polling frequency for CPU thermal zone
Michael Kao (6):
arm64: dts: mt8183: add thermal zone node
arm64: dts: mt8183: add/update dynamic power coefficients
arm64: dts: mt8183: Add #cooling-cells to CPU nodes
thermal: mediatek: mt8183: fix bank number settings
thermal: mediatek: add another get_temp ops for thermal sensors
thermal: mediatek: use spinlock to protect PTPCORESEL
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 157 +++++++++++++++++++++++
drivers/thermal/mtk_thermal.c | 88 +++++++++++--
2 files changed, 231 insertions(+), 14 deletions(-)
WARNING: multiple messages have this Message-ID (diff)
From: Michael Kao <michael.kao@mediatek.com>
To: Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <edubezval@gmail.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>, <hsinyi@chromium.org>,
<linux-pm@vger.kernel.org>, <srv_heupstream@mediatek.com>
Cc: devicetree@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3,0/8] Add Mediatek thermal dirver and dtsi
Date: Fri, 3 Jan 2020 14:43:59 +0800 [thread overview]
Message-ID: <20200103064407.19861-1-michael.kao@mediatek.com> (raw)
This patchset supports for MT8183 chip to mtk_thermal.c.
Add thermal zone of all the thermal sensor in SoC for
another get temperatrue. They don't need to thermal throttle.
And we bind coolers for thermal zone nodes of cpu_thermal.
Rebase to kernel-5.5-rc1.
Update content:
[1/8]
Update sustainable power of cpu, tzts1~5 and tztsABB.
[7/8]
Bypass the failure that non cpu_thermal sensor is not find in thermal-zones
in dts, which is normal for mt8173, so prompt a warning here instead of
failing.
Return -EAGAIN instead of -EACCESS on the first read of sensor that
often are bogus values. This can avoid following warning on boot:
thermal thermal_zone6: failed to read out thermal zone (-13)
This patch series base on these patches [1][2][3][4].
[1]support for reading chip ID and efuse (https://patchwork.kernel.org/patch/10902131/)
[2]arm64: dts: mt8183: Add reset-cells in infracfg (https://patchwork.kernel.org/patch/10908653/)
[3]clk: reset: Modify reset-controller driver (https://patchwork.kernel.org/patch/10908657/)
[4]PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/10923289/)
Matthias Kaehlcke (2):
arm64: dts: mt8183: Configure CPU cooling
arm64: dts: mt8183: Increase polling frequency for CPU thermal zone
Michael Kao (6):
arm64: dts: mt8183: add thermal zone node
arm64: dts: mt8183: add/update dynamic power coefficients
arm64: dts: mt8183: Add #cooling-cells to CPU nodes
thermal: mediatek: mt8183: fix bank number settings
thermal: mediatek: add another get_temp ops for thermal sensors
thermal: mediatek: use spinlock to protect PTPCORESEL
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 157 +++++++++++++++++++++++
drivers/thermal/mtk_thermal.c | 88 +++++++++++--
2 files changed, 231 insertions(+), 14 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-01-03 6:46 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-03 6:43 Michael Kao [this message]
2020-01-03 6:43 ` [PATCH v3,0/8] Add Mediatek thermal dirver and dtsi Michael Kao
2020-01-03 6:43 ` Michael Kao
2020-01-03 6:44 ` [PATCH v3,1/8] arm64: dts: mt8183: add thermal zone node Michael Kao
2020-01-03 6:44 ` Michael Kao
2020-01-09 11:31 ` Daniel Lezcano
2020-01-09 11:31 ` Daniel Lezcano
2020-01-09 11:31 ` Daniel Lezcano
2020-02-11 3:17 ` Michael Kao
2020-02-11 3:17 ` Michael Kao
2020-02-20 11:52 ` Daniel Lezcano
2020-02-20 11:52 ` Daniel Lezcano
2020-02-20 11:52 ` Daniel Lezcano
2020-02-20 20:57 ` Matthias Brugger
2020-02-20 20:57 ` Matthias Brugger
2020-02-20 20:57 ` Matthias Brugger
2020-02-26 1:58 ` Michael Kao
2020-02-26 1:58 ` Michael Kao
2020-02-26 1:58 ` Michael Kao
2020-02-20 20:56 ` Matthias Brugger
2020-02-20 20:56 ` Matthias Brugger
2020-02-20 20:56 ` Matthias Brugger
2020-01-03 6:44 ` [PATCH v3, 2/8] arm64: dts: mt8183: add/update dynamic power coefficients Michael Kao
2020-01-03 6:44 ` Michael Kao
2020-01-10 14:40 ` [PATCH v3,2/8] " Matthias Brugger
2020-01-10 14:40 ` Matthias Brugger
2020-01-10 14:40 ` Matthias Brugger
2020-02-11 2:05 ` Michael Kao
2020-02-11 2:05 ` Michael Kao
2020-02-20 21:06 ` Matthias Brugger
2020-02-20 21:06 ` Matthias Brugger
2020-02-20 21:06 ` Matthias Brugger
2020-01-03 6:44 ` [PATCH v3,3/8] arm64: dts: mt8183: Add #cooling-cells to CPU nodes Michael Kao
2020-01-03 6:44 ` Michael Kao
2020-02-20 21:59 ` Matthias Brugger
2020-02-20 21:59 ` Matthias Brugger
2020-02-20 21:59 ` Matthias Brugger
2020-01-03 6:44 ` [PATCH v3,4/8] arm64: dts: mt8183: Configure CPU cooling Michael Kao
2020-01-03 6:44 ` Michael Kao
2020-02-25 9:34 ` Michael Kao
2020-02-25 9:34 ` Michael Kao
2020-01-03 6:44 ` [PATCH v3, 5/8] arm64: dts: mt8183: Increase polling frequency for CPU thermal zone Michael Kao
2020-01-03 6:44 ` Michael Kao
2020-01-03 6:44 ` [PATCH v3,5/8] " Michael Kao
2020-01-03 6:44 ` [PATCH v3,6/8] thermal: mediatek: mt8183: fix bank number settings Michael Kao
2020-01-03 6:44 ` Michael Kao
2020-01-08 9:58 ` [PATCH v3, 6/8] " Hsin-Yi Wang
2020-01-08 9:58 ` Hsin-Yi Wang
2020-01-08 9:58 ` [PATCH v3,6/8] " Hsin-Yi Wang
2020-01-03 6:44 ` [PATCH v3, 7/8] thermal: mediatek: add another get_temp ops for thermal sensors Michael Kao
2020-01-03 6:44 ` Michael Kao
2020-01-03 6:44 ` [PATCH v3,7/8] " Michael Kao
2020-01-03 6:44 ` [PATCH v3,8/8] thermal: mediatek: use spinlock to protect PTPCORESEL Michael Kao
2020-01-03 6:44 ` Michael Kao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200103064407.19861-1-michael.kao@mediatek.com \
--to=michael.kao@mediatek.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=hsinyi@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.