From: John Crispin <john@phrozen.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Shashidhar Lakkavalli <slakkavalli@datto.com>,
linux-wireless@vger.kernel.org, ath11k@lists.infradead.org,
John Crispin <john@phrozen.org>
Subject: [RESEND] ath11k: add tx hw 802.11 encapusaltion offloading support
Date: Wed, 22 Jan 2020 15:29:30 +0100 [thread overview]
Message-ID: <20200122142930.19239-1-john@phrozen.org> (raw)
This patch adds support for ethernet rxtx mode to the driver. The feature
is enabled via a new module parameter. If enabled to driver will enable
the feature on a per vif basis if all other requirements were met.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/net/wireless/ath/ath11k/core.h | 5 +++
drivers/net/wireless/ath/ath11k/dp_tx.c | 16 ++++++++--
drivers/net/wireless/ath/ath11k/mac.c | 41 ++++++++++++++++++++-----
3 files changed, 52 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index 25cdcf71d0c4..15676dce98b1 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -59,9 +59,14 @@ static inline enum wme_ac ath11k_tid_to_ac(u32 tid)
WME_AC_VO);
}
+enum ath11k_skb_flags {
+ ATH11K_SKB_HW_80211_ENCAP = BIT(0),
+};
+
struct ath11k_skb_cb {
dma_addr_t paddr;
u8 eid;
+ u8 flags;
struct ath11k *ar;
struct ieee80211_vif *vif;
} __packed;
diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
index 918305dda106..3206f432f65b 100644
--- a/drivers/net/wireless/ath/ath11k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
@@ -15,7 +15,11 @@ ath11k_txq_tcl_ring_map[ATH11K_HW_MAX_QUEUES] = { 0x0, 0x1, 0x2, 0x2 };
static enum hal_tcl_encap_type
ath11k_dp_tx_get_encap_type(struct ath11k_vif *arvif, struct sk_buff *skb)
{
- /* TODO: Determine encap type based on vif_type and configuration */
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+
+ if (tx_info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+ return HAL_TCL_ENCAP_TYPE_ETHERNET;
+
return HAL_TCL_ENCAP_TYPE_NATIVE_WIFI;
}
@@ -39,8 +43,11 @@ static void ath11k_dp_tx_encap_nwifi(struct sk_buff *skb)
static u8 ath11k_dp_tx_get_tid(struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (void *)skb->data;
+ struct ath11k_skb_cb *cb = ATH11K_SKB_CB(skb);
- if (!ieee80211_is_data_qos(hdr->frame_control))
+ if (cb->flags & ATH11K_SKB_HW_80211_ENCAP)
+ return skb->priority % IEEE80211_QOS_CTL_TID_MASK;
+ else if (!ieee80211_is_data_qos(hdr->frame_control))
return HAL_DESC_REO_NON_QOS_TID;
else
return skb->priority & IEEE80211_QOS_CTL_TID_MASK;
@@ -87,7 +94,8 @@ int ath11k_dp_tx(struct ath11k *ar, struct ath11k_vif *arvif,
if (test_bit(ATH11K_FLAG_CRASH_FLUSH, &ar->ab->dev_flags))
return -ESHUTDOWN;
- if (!ieee80211_is_data(hdr->frame_control))
+ if (!(info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) &&
+ !ieee80211_is_data(hdr->frame_control))
return -ENOTSUPP;
pool_id = skb_get_queue_mapping(skb) & (ATH11K_HW_MAX_QUEUES - 1);
@@ -148,6 +156,8 @@ int ath11k_dp_tx(struct ath11k *ar, struct ath11k_vif *arvif,
* skb_checksum_help() is needed
*/
case HAL_TCL_ENCAP_TYPE_ETHERNET:
+ /* no need to encap */
+ break;
case HAL_TCL_ENCAP_TYPE_802_3:
/* TODO: Take care of other encap modes as well */
ret = -EINVAL;
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 556eef9881a7..f56adba5f838 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -33,6 +33,10 @@
.max_power = 30, \
}
+static unsigned int ath11k_ethernet_mode;
+module_param_named(ethernet_mode, ath11k_ethernet_mode, uint, 0644);
+MODULE_PARM_DESC(ethernet_mode, "Use ethernet frame datapath");
+
static const struct ieee80211_channel ath11k_2ghz_channels[] = {
CHAN2G(1, 2412, 0),
CHAN2G(2, 2417, 0),
@@ -3633,6 +3637,7 @@ static int ath11k_mac_mgmt_tx_wmi(struct ath11k *ar, struct ath11k_vif *arvif,
{
struct ath11k_base *ab = ar->ab;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_tx_info *info;
dma_addr_t paddr;
int buf_id;
int ret;
@@ -3644,11 +3649,14 @@ static int ath11k_mac_mgmt_tx_wmi(struct ath11k *ar, struct ath11k_vif *arvif,
if (buf_id < 0)
return -ENOSPC;
- if ((ieee80211_is_action(hdr->frame_control) ||
- ieee80211_is_deauth(hdr->frame_control) ||
- ieee80211_is_disassoc(hdr->frame_control)) &&
- ieee80211_has_protected(hdr->frame_control)) {
- skb_put(skb, IEEE80211_CCMP_MIC_LEN);
+ info = IEEE80211_SKB_CB(skb);
+ if (!(info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)) {
+ if ((ieee80211_is_action(hdr->frame_control) ||
+ ieee80211_is_deauth(hdr->frame_control) ||
+ ieee80211_is_disassoc(hdr->frame_control)) &&
+ ieee80211_has_protected(hdr->frame_control)) {
+ skb_put(skb, IEEE80211_CCMP_MIC_LEN);
+ }
}
paddr = dma_map_single(ab->dev, skb->data, skb->len, DMA_TO_DEVICE);
@@ -3745,6 +3753,7 @@ static void ath11k_mac_op_tx(struct ieee80211_hw *hw,
struct ieee80211_tx_control *control,
struct sk_buff *skb)
{
+ struct ath11k_skb_cb *skb_cb = ATH11K_SKB_CB((struct sk_buff *)skb);
struct ath11k *ar = hw->priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_vif *vif = info->control.vif;
@@ -3753,7 +3762,10 @@ static void ath11k_mac_op_tx(struct ieee80211_hw *hw,
bool is_prb_rsp;
int ret;
- if (ieee80211_is_mgmt(hdr->frame_control)) {
+ skb_cb->flags = 0;
+ if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+ skb_cb->flags = ATH11K_SKB_HW_80211_ENCAP;
+ } else if (ieee80211_is_mgmt(hdr->frame_control)) {
is_prb_rsp = ieee80211_is_probe_resp(hdr->frame_control);
ret = ath11k_mac_mgmt_tx(ar, skb, is_prb_rsp);
if (ret) {
@@ -4028,6 +4040,7 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
struct vdev_create_params vdev_param = {0};
struct peer_create_params peer_param;
u32 param_id, param_value;
+ int hw_encap = 0;
u16 nss;
int i;
int ret;
@@ -4119,7 +4132,21 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
spin_unlock_bh(&ar->data_lock);
param_id = WMI_VDEV_PARAM_TX_ENCAP_TYPE;
- param_value = ATH11K_HW_TXRX_NATIVE_WIFI;
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_AP:
+ hw_encap = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (ieee80211_set_hw_80211_encap(vif, ath11k_ethernet_mode && hw_encap))
+ param_value = ATH11K_HW_TXRX_ETHERNET;
+ else
+ param_value = ATH11K_HW_TXRX_NATIVE_WIFI;
+
ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
param_id, param_value);
if (ret) {
--
2.20.1
_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
WARNING: multiple messages have this Message-ID (diff)
From: John Crispin <john@phrozen.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org, ath11k@lists.infradead.org,
John Crispin <john@phrozen.org>,
Shashidhar Lakkavalli <slakkavalli@datto.com>
Subject: [RESEND] ath11k: add tx hw 802.11 encapusaltion offloading support
Date: Wed, 22 Jan 2020 15:29:30 +0100 [thread overview]
Message-ID: <20200122142930.19239-1-john@phrozen.org> (raw)
This patch adds support for ethernet rxtx mode to the driver. The feature
is enabled via a new module parameter. If enabled to driver will enable
the feature on a per vif basis if all other requirements were met.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/net/wireless/ath/ath11k/core.h | 5 +++
drivers/net/wireless/ath/ath11k/dp_tx.c | 16 ++++++++--
drivers/net/wireless/ath/ath11k/mac.c | 41 ++++++++++++++++++++-----
3 files changed, 52 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index 25cdcf71d0c4..15676dce98b1 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -59,9 +59,14 @@ static inline enum wme_ac ath11k_tid_to_ac(u32 tid)
WME_AC_VO);
}
+enum ath11k_skb_flags {
+ ATH11K_SKB_HW_80211_ENCAP = BIT(0),
+};
+
struct ath11k_skb_cb {
dma_addr_t paddr;
u8 eid;
+ u8 flags;
struct ath11k *ar;
struct ieee80211_vif *vif;
} __packed;
diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
index 918305dda106..3206f432f65b 100644
--- a/drivers/net/wireless/ath/ath11k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
@@ -15,7 +15,11 @@ ath11k_txq_tcl_ring_map[ATH11K_HW_MAX_QUEUES] = { 0x0, 0x1, 0x2, 0x2 };
static enum hal_tcl_encap_type
ath11k_dp_tx_get_encap_type(struct ath11k_vif *arvif, struct sk_buff *skb)
{
- /* TODO: Determine encap type based on vif_type and configuration */
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+
+ if (tx_info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+ return HAL_TCL_ENCAP_TYPE_ETHERNET;
+
return HAL_TCL_ENCAP_TYPE_NATIVE_WIFI;
}
@@ -39,8 +43,11 @@ static void ath11k_dp_tx_encap_nwifi(struct sk_buff *skb)
static u8 ath11k_dp_tx_get_tid(struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (void *)skb->data;
+ struct ath11k_skb_cb *cb = ATH11K_SKB_CB(skb);
- if (!ieee80211_is_data_qos(hdr->frame_control))
+ if (cb->flags & ATH11K_SKB_HW_80211_ENCAP)
+ return skb->priority % IEEE80211_QOS_CTL_TID_MASK;
+ else if (!ieee80211_is_data_qos(hdr->frame_control))
return HAL_DESC_REO_NON_QOS_TID;
else
return skb->priority & IEEE80211_QOS_CTL_TID_MASK;
@@ -87,7 +94,8 @@ int ath11k_dp_tx(struct ath11k *ar, struct ath11k_vif *arvif,
if (test_bit(ATH11K_FLAG_CRASH_FLUSH, &ar->ab->dev_flags))
return -ESHUTDOWN;
- if (!ieee80211_is_data(hdr->frame_control))
+ if (!(info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) &&
+ !ieee80211_is_data(hdr->frame_control))
return -ENOTSUPP;
pool_id = skb_get_queue_mapping(skb) & (ATH11K_HW_MAX_QUEUES - 1);
@@ -148,6 +156,8 @@ int ath11k_dp_tx(struct ath11k *ar, struct ath11k_vif *arvif,
* skb_checksum_help() is needed
*/
case HAL_TCL_ENCAP_TYPE_ETHERNET:
+ /* no need to encap */
+ break;
case HAL_TCL_ENCAP_TYPE_802_3:
/* TODO: Take care of other encap modes as well */
ret = -EINVAL;
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 556eef9881a7..f56adba5f838 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -33,6 +33,10 @@
.max_power = 30, \
}
+static unsigned int ath11k_ethernet_mode;
+module_param_named(ethernet_mode, ath11k_ethernet_mode, uint, 0644);
+MODULE_PARM_DESC(ethernet_mode, "Use ethernet frame datapath");
+
static const struct ieee80211_channel ath11k_2ghz_channels[] = {
CHAN2G(1, 2412, 0),
CHAN2G(2, 2417, 0),
@@ -3633,6 +3637,7 @@ static int ath11k_mac_mgmt_tx_wmi(struct ath11k *ar, struct ath11k_vif *arvif,
{
struct ath11k_base *ab = ar->ab;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_tx_info *info;
dma_addr_t paddr;
int buf_id;
int ret;
@@ -3644,11 +3649,14 @@ static int ath11k_mac_mgmt_tx_wmi(struct ath11k *ar, struct ath11k_vif *arvif,
if (buf_id < 0)
return -ENOSPC;
- if ((ieee80211_is_action(hdr->frame_control) ||
- ieee80211_is_deauth(hdr->frame_control) ||
- ieee80211_is_disassoc(hdr->frame_control)) &&
- ieee80211_has_protected(hdr->frame_control)) {
- skb_put(skb, IEEE80211_CCMP_MIC_LEN);
+ info = IEEE80211_SKB_CB(skb);
+ if (!(info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)) {
+ if ((ieee80211_is_action(hdr->frame_control) ||
+ ieee80211_is_deauth(hdr->frame_control) ||
+ ieee80211_is_disassoc(hdr->frame_control)) &&
+ ieee80211_has_protected(hdr->frame_control)) {
+ skb_put(skb, IEEE80211_CCMP_MIC_LEN);
+ }
}
paddr = dma_map_single(ab->dev, skb->data, skb->len, DMA_TO_DEVICE);
@@ -3745,6 +3753,7 @@ static void ath11k_mac_op_tx(struct ieee80211_hw *hw,
struct ieee80211_tx_control *control,
struct sk_buff *skb)
{
+ struct ath11k_skb_cb *skb_cb = ATH11K_SKB_CB((struct sk_buff *)skb);
struct ath11k *ar = hw->priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_vif *vif = info->control.vif;
@@ -3753,7 +3762,10 @@ static void ath11k_mac_op_tx(struct ieee80211_hw *hw,
bool is_prb_rsp;
int ret;
- if (ieee80211_is_mgmt(hdr->frame_control)) {
+ skb_cb->flags = 0;
+ if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+ skb_cb->flags = ATH11K_SKB_HW_80211_ENCAP;
+ } else if (ieee80211_is_mgmt(hdr->frame_control)) {
is_prb_rsp = ieee80211_is_probe_resp(hdr->frame_control);
ret = ath11k_mac_mgmt_tx(ar, skb, is_prb_rsp);
if (ret) {
@@ -4028,6 +4040,7 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
struct vdev_create_params vdev_param = {0};
struct peer_create_params peer_param;
u32 param_id, param_value;
+ int hw_encap = 0;
u16 nss;
int i;
int ret;
@@ -4119,7 +4132,21 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
spin_unlock_bh(&ar->data_lock);
param_id = WMI_VDEV_PARAM_TX_ENCAP_TYPE;
- param_value = ATH11K_HW_TXRX_NATIVE_WIFI;
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_AP:
+ hw_encap = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (ieee80211_set_hw_80211_encap(vif, ath11k_ethernet_mode && hw_encap))
+ param_value = ATH11K_HW_TXRX_ETHERNET;
+ else
+ param_value = ATH11K_HW_TXRX_NATIVE_WIFI;
+
ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
param_id, param_value);
if (ret) {
--
2.20.1
next reply other threads:[~2020-01-22 14:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-22 14:29 John Crispin [this message]
2020-01-22 14:29 ` [RESEND] ath11k: add tx hw 802.11 encapusaltion offloading support John Crispin
2020-01-23 9:45 ` periyasa
2020-01-23 9:45 ` periyasa
2020-01-26 11:28 ` Kalle Valo
2020-01-26 11:28 ` Kalle Valo
2020-01-26 13:13 ` Justin Capella
2020-01-26 13:13 ` Justin Capella
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200122142930.19239-1-john@phrozen.org \
--to=john@phrozen.org \
--cc=ath11k@lists.infradead.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=slakkavalli@datto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.