* [RFC PATCH v3 0/8] Support ROHM BD99954 charger IC
@ 2020-02-20 7:33 ` Matti Vaittinen
0 siblings, 0 replies; 25+ messages in thread
From: Matti Vaittinen @ 2020-02-20 7:33 UTC (permalink / raw)
To: matti.vaittinen, mazziesaccount
Cc: Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman,
Rafael J. Wysocki, Liam Girdwood, Mark Brown, Chen-Yu Tsai,
Support Opensource, Charles Keepax, Richard Fitzgerald, Milo Kim,
Bartosz Golaszewski, Andrei Stefanescu, Matthias Brugger,
Tony Lindgren, Andy Gross, Bjorn Andersson, Sangbeom Kim,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz, Matti Vaittinen,
linux-pm, devicetree, linux-kernel, patches, linux-arm-kernel,
linux-mediatek, linux-omap, linux-arm-msm, linux-samsung-soc,
Markus Laine, Mikko Mutanen
Support ROHM BD99954 Battery Management IC
ROHM BD99954 is a Battery Management IC for 1-4 cell Lithium-Ion
secondary battery. BD99954 is intended to be used in space-constraint
equipment such as Low profile Notebook PC, Tablets and other
applications.
Series extracts a "linear ranges" helper out of the regulator
framework. Linear ranges helper is intended to help converting
real-world values to register values when conversion is linear. I
suspect this is usefull also for power subsystem and possibly for clk.
This version of series introduces new battry DT binding entries and
adds the parsing in power_supply_get_battery_info(). These properties
can be converted to ROHM specific properties and parsing can be moved
to the BD99954 driver if this does not seem like a right thing to do.
I just have a feeling the the BD99954 is not the only charger which
could utilize these.
We also add ROHM specific charger parameters for limiting the input
current(s). I think these parameters are pretty common and maybe the
"rohm,"-prefix should be dropped and we should try having common
input limiting properties for different chips?
Series is based on v5.5-rc7
Changelog RFC-v3:
DT-bindings:
- fix the BD99954 binding (the *-microvolt Vs. *-microvolts issue is
still there. Not sure which one is correct)
- renabe tricklecharge-* binding to trickle-charge-* as suggested by
Rob.
- drop the linear-ranges helper which was written for BD70528 and
extract the linear-range code from regulator framework instead.
- refactor regulator framework to utilize extracted linear-ranges
code.
- change the struct regulator_linear_range to linear_range from
regulator drivers.
- refactor BD70528 to use regulator framework originated
linear-ranges code.
- change BD99954 to use linear-ranges code from regulator framework
Changelog RFC-v2:
DT-bindings:
- Used the battery parameters described in battery.txt
- Added few new parameters to battery.txt
- Added ASCII art charging profile chart for BD99954 to explain
states and limits.
Linear ranges:
- Fixed division by zero error from linear-ranges code if step 0 is
used.
Power-supply core:
- Added parsing of new battery parameters.
BD99954 driver:
- converted to use battery parameters from battery node
- Added step 0 ranges for reg values which do not change voltage
- added dt-node to psy-config
Patch 1:
DT binding docs for the new battery parameters
Patch 2:
BD99954 charger DT binding docs
Patch 3:
Linear ranges helpers
Patch 4:
Rename struct regulator_linear_range to struct linear_range and
convert regulator drivers to use renamed struct
Patch 5:
Use linear-ranges helpers in regulator framework
Patch 6:
Use linear-ranges helpers in bd70528 driver
Patch 7:
Parsing of new battery parameters
Patch 8:
ROHM BD99954 charger IC driver
---
Matti Vaittinen (8):
dt-bindings: battry: add new battery parameters
dt_bindings: ROHM BD99954 Charger
drivers: base: add linear ranges helpers
regulator: rename regulator_linear_range to linear_range
regulator: use linear_ranges helper
power: supply: bd70528: use linear ranges
power: supply: add battery parameters
power: supply: Support ROHM bd99954 charger
.../bindings/power/supply/battery.txt | 6 +
.../bindings/power/supply/rohm,bd9995x.yaml | 153 +++
drivers/base/Kconfig | 3 +
drivers/base/Makefile | 1 +
drivers/base/linear_ranges.c | 246 ++++
drivers/power/supply/Kconfig | 11 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/bd70528-charger.c | 142 +-
drivers/power/supply/bd99954-charger.c | 1171 +++++++++++++++++
drivers/power/supply/power_supply_core.c | 8 +
drivers/regulator/88pg86x.c | 4 +-
drivers/regulator/88pm800-regulator.c | 4 +-
drivers/regulator/Kconfig | 1 +
drivers/regulator/act8865-regulator.c | 4 +-
drivers/regulator/act8945a-regulator.c | 2 +-
drivers/regulator/arizona-ldo1.c | 2 +-
drivers/regulator/arizona-micsupp.c | 4 +-
drivers/regulator/as3711-regulator.c | 6 +-
drivers/regulator/as3722-regulator.c | 4 +-
drivers/regulator/axp20x-regulator.c | 16 +-
drivers/regulator/bcm590xx-regulator.c | 8 +-
drivers/regulator/bd70528-regulator.c | 8 +-
drivers/regulator/bd718x7-regulator.c | 26 +-
drivers/regulator/da903x.c | 2 +-
drivers/regulator/helpers.c | 130 +-
drivers/regulator/hi6421-regulator.c | 4 +-
drivers/regulator/lochnagar-regulator.c | 4 +-
drivers/regulator/lp873x-regulator.c | 4 +-
drivers/regulator/lp87565-regulator.c | 2 +-
drivers/regulator/lp8788-buck.c | 2 +-
drivers/regulator/max77650-regulator.c | 2 +-
drivers/regulator/mcp16502.c | 4 +-
drivers/regulator/mt6323-regulator.c | 6 +-
drivers/regulator/mt6358-regulator.c | 8 +-
drivers/regulator/mt6380-regulator.c | 6 +-
drivers/regulator/mt6397-regulator.c | 6 +-
drivers/regulator/palmas-regulator.c | 4 +-
drivers/regulator/qcom-rpmh-regulator.c | 2 +-
drivers/regulator/qcom_rpm-regulator.c | 14 +-
drivers/regulator/qcom_smd-regulator.c | 70 +-
drivers/regulator/rk808-regulator.c | 10 +-
drivers/regulator/s2mps11.c | 14 +-
drivers/regulator/sky81452-regulator.c | 2 +-
drivers/regulator/stpmic1_regulator.c | 18 +-
drivers/regulator/tps65086-regulator.c | 10 +-
drivers/regulator/tps65217-regulator.c | 4 +-
drivers/regulator/tps65218-regulator.c | 6 +-
drivers/regulator/tps65912-regulator.c | 4 +-
drivers/regulator/twl-regulator.c | 4 +-
drivers/regulator/twl6030-regulator.c | 2 +-
drivers/regulator/wm831x-dcdc.c | 2 +-
drivers/regulator/wm831x-ldo.c | 4 +-
drivers/regulator/wm8350-regulator.c | 2 +-
drivers/regulator/wm8400-regulator.c | 2 +-
include/linux/linear_range.h | 48 +
include/linux/power/bd99954-charger.h | 1075 +++++++++++++++
include/linux/power_supply.h | 4 +
include/linux/regulator/driver.h | 27 +-
58 files changed, 3000 insertions(+), 339 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml
create mode 100644 drivers/base/linear_ranges.c
create mode 100644 drivers/power/supply/bd99954-charger.c
create mode 100644 include/linux/linear_range.h
create mode 100644 include/linux/power/bd99954-charger.h
base-commit def9d2780727 ("Linux 5.5-rc7")
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
^ permalink raw reply [flat|nested] 25+ messages in thread* [RFC PATCH v3 0/8] Support ROHM BD99954 charger IC @ 2020-02-20 7:33 ` Matti Vaittinen 0 siblings, 0 replies; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:33 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Mark Rutland, Milo Kim, Andrei Stefanescu, Rafael J. Wysocki, Tony Lindgren, Sebastian Reichel, linux-samsung-soc, linux-omap, linux-pm, Krzysztof Kozlowski, Bartosz Golaszewski, Chen-Yu Tsai, Andy Gross, Markus Laine, devicetree, Charles Keepax, Bartlomiej Zolnierkiewicz, linux-arm-msm, Richard Fitzgerald, Mark Brown, linux-mediatek, Matthias Brugger, Bjorn Andersson, linux-arm-kernel, Support Opensource, Sangbeom Kim, Greg Kroah-Hartman, Matti Vaittinen, Liam Girdwood, linux-kernel, Mikko Mutanen, Rob Herring, patches Support ROHM BD99954 Battery Management IC ROHM BD99954 is a Battery Management IC for 1-4 cell Lithium-Ion secondary battery. BD99954 is intended to be used in space-constraint equipment such as Low profile Notebook PC, Tablets and other applications. Series extracts a "linear ranges" helper out of the regulator framework. Linear ranges helper is intended to help converting real-world values to register values when conversion is linear. I suspect this is usefull also for power subsystem and possibly for clk. This version of series introduces new battry DT binding entries and adds the parsing in power_supply_get_battery_info(). These properties can be converted to ROHM specific properties and parsing can be moved to the BD99954 driver if this does not seem like a right thing to do. I just have a feeling the the BD99954 is not the only charger which could utilize these. We also add ROHM specific charger parameters for limiting the input current(s). I think these parameters are pretty common and maybe the "rohm,"-prefix should be dropped and we should try having common input limiting properties for different chips? Series is based on v5.5-rc7 Changelog RFC-v3: DT-bindings: - fix the BD99954 binding (the *-microvolt Vs. *-microvolts issue is still there. Not sure which one is correct) - renabe tricklecharge-* binding to trickle-charge-* as suggested by Rob. - drop the linear-ranges helper which was written for BD70528 and extract the linear-range code from regulator framework instead. - refactor regulator framework to utilize extracted linear-ranges code. - change the struct regulator_linear_range to linear_range from regulator drivers. - refactor BD70528 to use regulator framework originated linear-ranges code. - change BD99954 to use linear-ranges code from regulator framework Changelog RFC-v2: DT-bindings: - Used the battery parameters described in battery.txt - Added few new parameters to battery.txt - Added ASCII art charging profile chart for BD99954 to explain states and limits. Linear ranges: - Fixed division by zero error from linear-ranges code if step 0 is used. Power-supply core: - Added parsing of new battery parameters. BD99954 driver: - converted to use battery parameters from battery node - Added step 0 ranges for reg values which do not change voltage - added dt-node to psy-config Patch 1: DT binding docs for the new battery parameters Patch 2: BD99954 charger DT binding docs Patch 3: Linear ranges helpers Patch 4: Rename struct regulator_linear_range to struct linear_range and convert regulator drivers to use renamed struct Patch 5: Use linear-ranges helpers in regulator framework Patch 6: Use linear-ranges helpers in bd70528 driver Patch 7: Parsing of new battery parameters Patch 8: ROHM BD99954 charger IC driver --- Matti Vaittinen (8): dt-bindings: battry: add new battery parameters dt_bindings: ROHM BD99954 Charger drivers: base: add linear ranges helpers regulator: rename regulator_linear_range to linear_range regulator: use linear_ranges helper power: supply: bd70528: use linear ranges power: supply: add battery parameters power: supply: Support ROHM bd99954 charger .../bindings/power/supply/battery.txt | 6 + .../bindings/power/supply/rohm,bd9995x.yaml | 153 +++ drivers/base/Kconfig | 3 + drivers/base/Makefile | 1 + drivers/base/linear_ranges.c | 246 ++++ drivers/power/supply/Kconfig | 11 + drivers/power/supply/Makefile | 1 + drivers/power/supply/bd70528-charger.c | 142 +- drivers/power/supply/bd99954-charger.c | 1171 +++++++++++++++++ drivers/power/supply/power_supply_core.c | 8 + drivers/regulator/88pg86x.c | 4 +- drivers/regulator/88pm800-regulator.c | 4 +- drivers/regulator/Kconfig | 1 + drivers/regulator/act8865-regulator.c | 4 +- drivers/regulator/act8945a-regulator.c | 2 +- drivers/regulator/arizona-ldo1.c | 2 +- drivers/regulator/arizona-micsupp.c | 4 +- drivers/regulator/as3711-regulator.c | 6 +- drivers/regulator/as3722-regulator.c | 4 +- drivers/regulator/axp20x-regulator.c | 16 +- drivers/regulator/bcm590xx-regulator.c | 8 +- drivers/regulator/bd70528-regulator.c | 8 +- drivers/regulator/bd718x7-regulator.c | 26 +- drivers/regulator/da903x.c | 2 +- drivers/regulator/helpers.c | 130 +- drivers/regulator/hi6421-regulator.c | 4 +- drivers/regulator/lochnagar-regulator.c | 4 +- drivers/regulator/lp873x-regulator.c | 4 +- drivers/regulator/lp87565-regulator.c | 2 +- drivers/regulator/lp8788-buck.c | 2 +- drivers/regulator/max77650-regulator.c | 2 +- drivers/regulator/mcp16502.c | 4 +- drivers/regulator/mt6323-regulator.c | 6 +- drivers/regulator/mt6358-regulator.c | 8 +- drivers/regulator/mt6380-regulator.c | 6 +- drivers/regulator/mt6397-regulator.c | 6 +- drivers/regulator/palmas-regulator.c | 4 +- drivers/regulator/qcom-rpmh-regulator.c | 2 +- drivers/regulator/qcom_rpm-regulator.c | 14 +- drivers/regulator/qcom_smd-regulator.c | 70 +- drivers/regulator/rk808-regulator.c | 10 +- drivers/regulator/s2mps11.c | 14 +- drivers/regulator/sky81452-regulator.c | 2 +- drivers/regulator/stpmic1_regulator.c | 18 +- drivers/regulator/tps65086-regulator.c | 10 +- drivers/regulator/tps65217-regulator.c | 4 +- drivers/regulator/tps65218-regulator.c | 6 +- drivers/regulator/tps65912-regulator.c | 4 +- drivers/regulator/twl-regulator.c | 4 +- drivers/regulator/twl6030-regulator.c | 2 +- drivers/regulator/wm831x-dcdc.c | 2 +- drivers/regulator/wm831x-ldo.c | 4 +- drivers/regulator/wm8350-regulator.c | 2 +- drivers/regulator/wm8400-regulator.c | 2 +- include/linux/linear_range.h | 48 + include/linux/power/bd99954-charger.h | 1075 +++++++++++++++ include/linux/power_supply.h | 4 + include/linux/regulator/driver.h | 27 +- 58 files changed, 3000 insertions(+), 339 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml create mode 100644 drivers/base/linear_ranges.c create mode 100644 drivers/power/supply/bd99954-charger.c create mode 100644 include/linux/linear_range.h create mode 100644 include/linux/power/bd99954-charger.h base-commit def9d2780727 ("Linux 5.5-rc7") -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 25+ messages in thread
* [RFC PATCH v3 0/8] Support ROHM BD99954 charger IC @ 2020-02-20 7:33 ` Matti Vaittinen 0 siblings, 0 replies; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:33 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Mark Rutland, Milo Kim, Andrei Stefanescu, Rafael J. Wysocki, Tony Lindgren, Sebastian Reichel, linux-samsung-soc, linux-omap, linux-pm, Krzysztof Kozlowski, Bartosz Golaszewski, Chen-Yu Tsai, Andy Gross, Markus Laine, devicetree, Charles Keepax, Bartlomiej Zolnierkiewicz, linux-arm-msm, Richard Fitzgerald, Mark Brown, linux-mediatek, Matthias Brugger, Bjorn Andersson, linux-arm-kernel, Support Opensource, Sangbeom Kim, Greg Kroah-Hartman, Matti Vaittinen, Liam Girdwood, linux-kernel, Mikko Mutanen, Rob Herring, patches Support ROHM BD99954 Battery Management IC ROHM BD99954 is a Battery Management IC for 1-4 cell Lithium-Ion secondary battery. BD99954 is intended to be used in space-constraint equipment such as Low profile Notebook PC, Tablets and other applications. Series extracts a "linear ranges" helper out of the regulator framework. Linear ranges helper is intended to help converting real-world values to register values when conversion is linear. I suspect this is usefull also for power subsystem and possibly for clk. This version of series introduces new battry DT binding entries and adds the parsing in power_supply_get_battery_info(). These properties can be converted to ROHM specific properties and parsing can be moved to the BD99954 driver if this does not seem like a right thing to do. I just have a feeling the the BD99954 is not the only charger which could utilize these. We also add ROHM specific charger parameters for limiting the input current(s). I think these parameters are pretty common and maybe the "rohm,"-prefix should be dropped and we should try having common input limiting properties for different chips? Series is based on v5.5-rc7 Changelog RFC-v3: DT-bindings: - fix the BD99954 binding (the *-microvolt Vs. *-microvolts issue is still there. Not sure which one is correct) - renabe tricklecharge-* binding to trickle-charge-* as suggested by Rob. - drop the linear-ranges helper which was written for BD70528 and extract the linear-range code from regulator framework instead. - refactor regulator framework to utilize extracted linear-ranges code. - change the struct regulator_linear_range to linear_range from regulator drivers. - refactor BD70528 to use regulator framework originated linear-ranges code. - change BD99954 to use linear-ranges code from regulator framework Changelog RFC-v2: DT-bindings: - Used the battery parameters described in battery.txt - Added few new parameters to battery.txt - Added ASCII art charging profile chart for BD99954 to explain states and limits. Linear ranges: - Fixed division by zero error from linear-ranges code if step 0 is used. Power-supply core: - Added parsing of new battery parameters. BD99954 driver: - converted to use battery parameters from battery node - Added step 0 ranges for reg values which do not change voltage - added dt-node to psy-config Patch 1: DT binding docs for the new battery parameters Patch 2: BD99954 charger DT binding docs Patch 3: Linear ranges helpers Patch 4: Rename struct regulator_linear_range to struct linear_range and convert regulator drivers to use renamed struct Patch 5: Use linear-ranges helpers in regulator framework Patch 6: Use linear-ranges helpers in bd70528 driver Patch 7: Parsing of new battery parameters Patch 8: ROHM BD99954 charger IC driver --- Matti Vaittinen (8): dt-bindings: battry: add new battery parameters dt_bindings: ROHM BD99954 Charger drivers: base: add linear ranges helpers regulator: rename regulator_linear_range to linear_range regulator: use linear_ranges helper power: supply: bd70528: use linear ranges power: supply: add battery parameters power: supply: Support ROHM bd99954 charger .../bindings/power/supply/battery.txt | 6 + .../bindings/power/supply/rohm,bd9995x.yaml | 153 +++ drivers/base/Kconfig | 3 + drivers/base/Makefile | 1 + drivers/base/linear_ranges.c | 246 ++++ drivers/power/supply/Kconfig | 11 + drivers/power/supply/Makefile | 1 + drivers/power/supply/bd70528-charger.c | 142 +- drivers/power/supply/bd99954-charger.c | 1171 +++++++++++++++++ drivers/power/supply/power_supply_core.c | 8 + drivers/regulator/88pg86x.c | 4 +- drivers/regulator/88pm800-regulator.c | 4 +- drivers/regulator/Kconfig | 1 + drivers/regulator/act8865-regulator.c | 4 +- drivers/regulator/act8945a-regulator.c | 2 +- drivers/regulator/arizona-ldo1.c | 2 +- drivers/regulator/arizona-micsupp.c | 4 +- drivers/regulator/as3711-regulator.c | 6 +- drivers/regulator/as3722-regulator.c | 4 +- drivers/regulator/axp20x-regulator.c | 16 +- drivers/regulator/bcm590xx-regulator.c | 8 +- drivers/regulator/bd70528-regulator.c | 8 +- drivers/regulator/bd718x7-regulator.c | 26 +- drivers/regulator/da903x.c | 2 +- drivers/regulator/helpers.c | 130 +- drivers/regulator/hi6421-regulator.c | 4 +- drivers/regulator/lochnagar-regulator.c | 4 +- drivers/regulator/lp873x-regulator.c | 4 +- drivers/regulator/lp87565-regulator.c | 2 +- drivers/regulator/lp8788-buck.c | 2 +- drivers/regulator/max77650-regulator.c | 2 +- drivers/regulator/mcp16502.c | 4 +- drivers/regulator/mt6323-regulator.c | 6 +- drivers/regulator/mt6358-regulator.c | 8 +- drivers/regulator/mt6380-regulator.c | 6 +- drivers/regulator/mt6397-regulator.c | 6 +- drivers/regulator/palmas-regulator.c | 4 +- drivers/regulator/qcom-rpmh-regulator.c | 2 +- drivers/regulator/qcom_rpm-regulator.c | 14 +- drivers/regulator/qcom_smd-regulator.c | 70 +- drivers/regulator/rk808-regulator.c | 10 +- drivers/regulator/s2mps11.c | 14 +- drivers/regulator/sky81452-regulator.c | 2 +- drivers/regulator/stpmic1_regulator.c | 18 +- drivers/regulator/tps65086-regulator.c | 10 +- drivers/regulator/tps65217-regulator.c | 4 +- drivers/regulator/tps65218-regulator.c | 6 +- drivers/regulator/tps65912-regulator.c | 4 +- drivers/regulator/twl-regulator.c | 4 +- drivers/regulator/twl6030-regulator.c | 2 +- drivers/regulator/wm831x-dcdc.c | 2 +- drivers/regulator/wm831x-ldo.c | 4 +- drivers/regulator/wm8350-regulator.c | 2 +- drivers/regulator/wm8400-regulator.c | 2 +- include/linux/linear_range.h | 48 + include/linux/power/bd99954-charger.h | 1075 +++++++++++++++ include/linux/power_supply.h | 4 + include/linux/regulator/driver.h | 27 +- 58 files changed, 3000 insertions(+), 339 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml create mode 100644 drivers/base/linear_ranges.c create mode 100644 drivers/power/supply/bd99954-charger.c create mode 100644 include/linux/linear_range.h create mode 100644 include/linux/power/bd99954-charger.h base-commit def9d2780727 ("Linux 5.5-rc7") -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 25+ messages in thread
* [RFC PATCH v3 1/8] dt-bindings: battry: add new battery parameters 2020-02-20 7:33 ` Matti Vaittinen (?) (?) @ 2020-02-20 7:34 ` Matti Vaittinen -1 siblings, 0 replies; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:34 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman, Rafael J. Wysocki, Liam Girdwood, Mark Brown, GitAuthor: Matti Vaittinen, linux-pm, devicetree, linux-kernel, Markus Laine, Mikko Mutanen Add: - trickle-charge-current-microamp: Some chargers have 3 charging stages. First one when battery is almost empty is often called as trickle-charge. Last state when battery has been "woken up" is usually called as fast-charge. In addition to this some chargers have a 'middle state' which ROHM BD99954 data-sheet describes as pre-charge. Some batteries can benefit from this 3-phase charging [citation needed]. Introduce trickle-charge-current-microamp so that batteries can give charging current limit for all three states. - precharge-upper-limit-microvolt: When battery voltage has reached certain limit we change from trickle-charge to next charging state (pre-charge for BD99954). Allow battery to specify this limit. - re-charge-voltage-microvolt: Allow giving a battery specific voltage limit for chargers which can automatically re-start charging when battery has discharghed down to this limit. - over-voltage-threshold-microvolt Allow specifying voltage threshold after which the battery is assumed to be faulty. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- Documentation/devicetree/bindings/power/supply/battery.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt index 5c913d4cf36c..1ad05dd59213 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -11,15 +11,21 @@ different type. This prevents unpredictable, potentially harmful, behavior should a replacement that changes the battery type occur without a corresponding update to the dtb. +Please note that not all charger drivers respect all of the properties. + Required Properties: - compatible: Must be "simple-battery" Optional Properties: + - over-voltage-threshold-microvolt: battery over-voltage limit + - re-charge-voltage-microvolt: limit to automatically start charging again - voltage-min-design-microvolt: drained battery voltage - voltage-max-design-microvolt: fully charged battery voltage - energy-full-design-microwatt-hours: battery design energy - charge-full-design-microamp-hours: battery design capacity + - trickle-charge-current-microamp: current for trickle-charge phase - precharge-current-microamp: current for pre-charge phase + - precharge-upper-limit-microvolt: limit when to change to constant charging - charge-term-current-microamp: current for charge termination phase - constant-charge-current-max-microamp: maximum constant input current - constant-charge-voltage-max-microvolt: maximum constant input voltage -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [RFC PATCH v3 2/8] dt_bindings: ROHM BD99954 Charger 2020-02-20 7:33 ` Matti Vaittinen ` (2 preceding siblings ...) (?) @ 2020-02-20 7:35 ` Matti Vaittinen 2020-02-20 20:34 ` Rob Herring -1 siblings, 1 reply; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:35 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman, Rafael J. Wysocki, Liam Girdwood, Mark Brown, GitAuthor: Matti Vaittinen, linux-pm, devicetree, linux-kernel, Markus Laine, Mikko Mutanen The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion secondary battery. Intended to be used in space-constraint equipment such as Low profile Notebook PC, Tablets and other applications. BD99954 provides a Dual-source Battery Charger, two port BC1.2 detection and a Battery Monitor. Document the DT bindings for BD99954 Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- .../bindings/power/supply/rohm,bd9995x.yaml | 153 ++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml new file mode 100644 index 000000000000..032aaa0a305e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/rohm,bd9995x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD99954 Battery charger driver + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Markus Laine <markus.laine@fi.rohmeurope.com> + - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com> + +description: | + The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion + secondary battery intended to be used in space-constraint equipment such + as Low profile Notebook PC, Tablets and other applications. BD99954 + provides a Dual-source Battery Charger, two port BC1.2 detection and a + Battery Monitor. + + +properties: + compatible: + const: rohm,bd9995x-charger +# +# The battery charging profile of BD99954. +# +# Curve (1) represents charging current. +# Curve (2) represents battery voltage. +# +# The BD99954 data sheet divides charging to three phases. +# a) Trickle-charge with constant current (8). +# b) pre-charge with constant current (6) +# c) fast-charge with: +# First a constant current (5) phase (CC) +# Then constant voltage (CV) phase (after the battery voltage has reached +# target level - until charging current has dropped to termination +# level (7) +# +# V ^ ^ I +# . . +# . . +# (4)- -.- - - - - - - - - - - - - - +++++++++++++++++++++++++++. +# . / . +# . ++++++/++ - - - - - - - - - - - - -.- - (5) +# . + / + . +# . + - -- . +# . + - + . +# . +.- -: . +# . .+ +` . +# . .- + | `/ . +# . .." + .: . +# . -" + -- . +# . (2) ..." + | :- . +# . ..."" + -: . +# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6) +# . + `:. . +# . + | -: . +# . + -: . +# . + .. . +# . (1) + | "+++- - - -.- - (7) +# -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8) +# . + - +# -------------------------------------------------+++++++++--> +# | | | CC | CV | +# | --trickle-- | -pre- | ---------fast----------- | +# +# The charger uses the following battery properties +# - trickle-charge-current-microamp: +# Current used at trickle-charge phase (8 in above chart) +# minimum: 64000 +# maximum: 1024000 +# multipleOf: 64000 +# - precharge-current-microamp: +# Current used at pre-charge phase (6 in above chart) +# minimum: 64000 +# maximum: 1024000 +# multipleOf: 64000 +# - constant-charge-current-max-microamp +# Current used at fast charge constant current phase (5 in above chart) +# minimum: 64000 +# maximum: 1024000 +# multipleOf: 64000 +# - constant-charge-voltage-max-microvolt +# The constant voltage used in fast charging phase (4 in above chart) +# minimum: 2560000 +# maximum: 19200000 +# multipleOf: 16000 +# - precharge-upper-limit-microvolt +# charging mode is changed from trickle charging to pre-charging +# when battery voltage exceeds this limit voltage (3 in above chart) +# minimum: 2048000 +# maximum: 19200000 +# multipleOf: 64000 +# - re-charge-voltage-microvolt +# minimum: 2560000 +# maximum: 19200000 +# multipleOf: 16000 +# re-charging is automatically started when battry has been discharging +# to the point where the battery voltage drops below this limit +# - over-voltage-threshold-microvolt +# battery is expected to be faulty if battery voltage exceeds this limit. +# Charger will then enter to a "battery faulty" -state +# minimum: 2560000 +# maximum: 19200000 +# multipleOf: 16000 +# - charge-term-current-microamp +# minimum: 0 +# maximum: 1024000 +# multipleOf: 64000 +# a charge cycle terminates when the battery voltage is above recharge +# threshold, and the current is below this setting (7 in above chart) +# See also Documentation/devicetree/bindings/power/supply/battery.txt + + monitored-battery: + description: + phandle of battery characteristics devicetree node + + rohm,vsys-regulation-microvolt: + description: system specific lower limit for system voltage. + minimum: 2560000 + maximum: 19200000 + #multipleOf: 64000 + + rohm,vbus-input-current-limit-microamp: + description: system specific VBUS input current limit (in microamps). + minimum: 32000 + maximum: 16352000 + #multipleOf: 32000 + + rohm,vcc-input-current-limit-microamp: + description: system specific VCC/VACP input current limit (in microamps). + minimum: 32000 + maximum: 16352000 + #multipleOf: 32000 + +required: + - compatible + +examples: + - | + i2c { + charger@9 { + compatible = "rohm,bd9995x-charger"; + monitored-battery = <&battery>; + reg = <0x9>; + interrupt-parent = <&gpio1>; + interrupts = <29 8>; + rohm,vsys-regulation-microvolt = <8960000>; + rohm,vbus-input-current-limit-microamp = <1472000>; + rohm,vcc-input-current-limit-microamp = <1472000>; + }; + }; -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 2/8] dt_bindings: ROHM BD99954 Charger 2020-02-20 7:35 ` [RFC PATCH v3 2/8] dt_bindings: ROHM BD99954 Charger Matti Vaittinen @ 2020-02-20 20:34 ` Rob Herring 0 siblings, 0 replies; 25+ messages in thread From: Rob Herring @ 2020-02-20 20:34 UTC (permalink / raw) To: Matti Vaittinen Cc: matti.vaittinen, mazziesaccount, Sebastian Reichel, GitAuthor: Matti Vaittinen, linux-pm, devicetree, linux-kernel, Markus Laine, Mikko Mutanen On Thu, 20 Feb 2020 09:35:10 +0200, Matti Vaittinen wrote: > The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion > secondary battery. Intended to be used in space-constraint equipment such > as Low profile Notebook PC, Tablets and other applications. BD99954 > provides a Dual-source Battery Charger, two port BC1.2 detection and a > Battery Monitor. > > Document the DT bindings for BD99954 > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > --- > .../bindings/power/supply/rohm,bd9995x.yaml | 153 ++++++++++++++++++ > 1 file changed, 153 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node Documentation/devicetree/bindings/power/supply/rohm,bd9995x.example.dts:21.17-29: Warning (reg_format): /example-0/i2c/charger@9:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/power/supply/rohm,bd9995x.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/power/supply/rohm,bd9995x.example.dts:17.5-28.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for I2C bus Documentation/devicetree/bindings/power/supply/rohm,bd9995x.example.dts:17.5-28.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for I2C bus Documentation/devicetree/bindings/power/supply/rohm,bd9995x.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/power/supply/rohm,bd9995x.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge' Documentation/devicetree/bindings/power/supply/rohm,bd9995x.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/power/supply/rohm,bd9995x.example.dts:18.23-27.15: Warning (avoid_default_addr_size): /example-0/i2c/charger@9: Relying on default #address-cells value Documentation/devicetree/bindings/power/supply/rohm,bd9995x.example.dts:18.23-27.15: Warning (avoid_default_addr_size): /example-0/i2c/charger@9: Relying on default #size-cells value See https://patchwork.ozlabs.org/patch/1241291 Please check and re-submit. ^ permalink raw reply [flat|nested] 25+ messages in thread
* [RFC PATCH v3 3/8] drivers: base: add linear ranges helpers 2020-02-20 7:33 ` Matti Vaittinen ` (3 preceding siblings ...) (?) @ 2020-02-20 7:35 ` Matti Vaittinen 2020-02-20 7:47 ` Randy Dunlap -1 siblings, 1 reply; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:35 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman, Rafael J. Wysocki, Liam Girdwood, Mark Brown, GitAuthor: Matti Vaittinen, linux-pm, devicetree, linux-kernel, Markus Laine, Mikko Mutanen Many devices have control registers which control some measurable property. Often a register contains control field so that change in this field causes linear change in the controlled property. It is not a rare case that user wants to give 'meaningfull' control values and driver needs to convert them to register field values. Even more often user wants to 'see' the currently set value - again in meaningfull units - and driver needs to convert the values it reads from register to these meaningfull units. Examples of this include: - regulators, voltage/current configurations - power, voltage/current configurations - clk(?) NCOs and maybe others I can't think of right now. Provide a linear_range helper which can do conversion from user value to register value 'selector'. The idea here is stolen from regulator framework and patches refactoring the regulator helpers to use this are following. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- drivers/base/Kconfig | 3 + drivers/base/Makefile | 1 + drivers/base/linear_ranges.c | 246 +++++++++++++++++++++++++++++++++++ include/linux/linear_range.h | 48 +++++++ 4 files changed, 298 insertions(+) create mode 100644 drivers/base/linear_ranges.c create mode 100644 include/linux/linear_range.h diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index c3b3b5c0b0da..c52aae709331 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -209,4 +209,7 @@ config GENERIC_ARCH_TOPOLOGY appropriate scaling, sysfs interface for reading capacity values at runtime. +config LINEAR_RANGES + tristate + endmenu diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 157452080f3d..dbb6c4f7ef07 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_PINCTRL) += pinctrl.o obj-$(CONFIG_DEV_COREDUMP) += devcoredump.o obj-$(CONFIG_GENERIC_MSI_IRQ_DOMAIN) += platform-msi.o obj-$(CONFIG_GENERIC_ARCH_TOPOLOGY) += arch_topology.o +obj-$(CONFIG_LINEAR_RANGES) += linear_ranges.o obj-y += test/ diff --git a/drivers/base/linear_ranges.c b/drivers/base/linear_ranges.c new file mode 100644 index 000000000000..5fa3b96bf2b8 --- /dev/null +++ b/drivers/base/linear_ranges.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linear_ranges.c -- helpers to map values in a linear range to range index + * + * Original idea borrowed from regulator framework + * + * It might be useful if we could support also inversely proportional ranges? + * Copyright 2020 ROHM Semiconductors + */ + +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/linear_range.h> + +/** + * linear_range_values_in_range - return the amount of values in a range + * + * @r: pointer to linear range where values are counted + * + * Compute the amount of values in range pointed by @r. Note, values can + * be all equal - range with selectors 0,...,2 with step 0 still contains + * 3 values even though they are all equal. + * + * Returns the amount of values in range pointed by @r + */ +unsigned int linear_range_values_in_range(const struct linear_range *r) +{ + if (!r) + return 0; + return r->max_sel - r->min_sel + 1; +} +EXPORT_SYMBOL(linear_range_values_in_range); + +/** + * linear_range_values_in_range_array - return the amount of values in ranges + * + * @r: pointer to array of linear ranges where values are counted + * @ranges: amount of ranges we include in computation. + * + * Compute the amount of values in ranges pointed by @r. Note, values can + * be all equal - range with selectors 0,...,2 with step 0 still contains + * 3 values even though they are all equal. + * + * Returns the amount of values in first @ranges ranges pointed by @r + */ +unsigned int linear_range_values_in_range_array(const struct linear_range *r, + int ranges) +{ + int i, values_in_range = 0; + + for (i = 0; i < ranges; i++) { + int values; + + values = linear_range_values_in_range(&r[i]); + if (!values) + return values; + + values_in_range += values; + } + return values_in_range; +} +EXPORT_SYMBOL(linear_range_values_in_range_array); + +/** + * linear_range_get_max_value - return the largest value in a range + * + * @r: pointer to linear range where value is looked from + * + * Returns the largest value in the given range + */ +unsigned int linear_range_get_max_value(const struct linear_range *r) +{ + return r->min + (r->max_sel - r->min_sel) * r->step; +} +EXPORT_SYMBOL(linear_range_get_max_value); + +/** + * linear_range_get_value - fetch a value from given range + * + * @r: pointer to linear range where value is looked from + * @selector: selector for which the value is searched + * @val: address where found value is updated + * + * Search given ranges for value which matches given selector. + * + * Returns 0 on success, -EINVAL given selector is not found from any of the + * ranges. + */ +int linear_range_get_value(const struct linear_range *r, unsigned int selector, + unsigned int *val) +{ + if (r->min_sel > selector || r->max_sel < selector) + return -EINVAL; + + *val = r->min + (selector - r->min_sel) * r->step; + + return 0; +} +EXPORT_SYMBOL(linear_range_get_value); + +/** + * linear_range_get_value_array - fetch a value from array of ranges + * + * @r: pointer to array of linear ranges where value is looked from + * @ranges: amount of ranges in an array + * @selector: selector for which the value is searched + * @val: address where found value is updated + * + * Search through an array of ranges for value which matches given selector. + * + * Returns 0 on success, -EINVAL given selector is not found from any of the + * ranges. + */ +int linear_range_get_value_array(const struct linear_range *r, int ranges, + unsigned int selector, unsigned int *val) +{ + int i; + + for (i = 0; i < ranges; i++) + if (r[i].min_sel <= selector && r[i].max_sel >= selector) + return linear_range_get_value(&r[i], selector, val); + + return -EINVAL; +} +EXPORT_SYMBOL(linear_range_get_value_array); + +/** + * linear_range_get_selector_low - return linear range selector for value + * + * @r: pointer to linear range where selector is looked from + * @val: value for which the selcetor is searched + * @selector: address where found selector value is updated + * @found: flag to indicate that given value was in the range + * + * Return selector which which range value is closest match for given + * input value. Value is matching if it is equal or smaller than given + * value. If given value is in the range, then @found is set true. + * + * Returns 0 on success, -EINVAL if range is invalid or does not contain + * value smaller or equal to given value + */ +int linear_range_get_selector_low(const struct linear_range *r, + unsigned int val, unsigned int *selector, + bool *found) +{ + *found = false; + + if (r->min > val) + return -EINVAL; + + if (linear_range_get_max_value(r) >= val) + *found = true; + + if (!r->step) + *selector = r->min_sel; + else + *selector = (val - r->min) / r->step + r->min_sel; + + return 0; +} +EXPORT_SYMBOL(linear_range_get_selector_low); + +/** + * linear_range_get_selector_low_array - return linear range selector for value + * + * @r: pointer to array of linear ranges where selector is looked from + * @ranges: amount of ranges to scan from array + * @val: value for which the selcetor is searched + * @selector: address where found selector value is updated + * @found: flag to indicate that given value was in the range + * + * Return Scan array of ranges for selector which which range value matches + * given input value. Value is matching if it is equal or smaller than given + * value. If given value is found to be in a range scannins is stopped and + * @found is set true. If a range with values smaller than given value is found + * but the range max is being smaller than given value, then the ranges + * biggest selector is updated to @selector but scanning ranges is continued + * and @found is set to false. + * + * Returns 0 on success, -EINVAL if range array is invalid or does not contain + * range with a value smaller or equal to given value + */ +int linear_range_get_selector_low_array(const struct linear_range *r, + int ranges, unsigned int val, + unsigned int *selector, bool *found) +{ + int i; + int ret = -EINVAL; + + for (i = 0; i < ranges; i++) { + int tmpret; + + tmpret = linear_range_get_selector_low(&r[i], val, selector, + found); + + if (!tmpret) + ret = 0; + + if (*found) + break; + } + + return ret; +} +EXPORT_SYMBOL(linear_range_get_selector_low_array); + +/** + * linear_range_get_selector_high - return linear range selector for value + * + * @r: pointer to linear range where selector is looked from + * @val: value for which the selcetor is searched + * @selector: address where found selector value is updated + * @found: flag to indicate that given value was in the range + * + * Return selector which which range value is closest match for given + * input value. Value is matching if it is equal or higher than given + * value. If given value is in the range, then @found is set true. + * + * Returns 0 on success, -EINVAL if range is invalid or does not contain + * value greater or equal to given value + */ +int linear_range_get_selector_high(const struct linear_range *r, + unsigned int val, unsigned int *selector, + bool *found) +{ + *found = false; + + if (linear_range_get_max_value(r) < val) + return -EINVAL; + + if (r->min <= val) { + *found = true; + } else { + *selector = r->min_sel; + return 0; + } + + if (!r->step) + *selector = r->max_sel; + else + *selector = DIV_ROUND_UP(val - r->min, r->step) + r->min_sel; + + return 0; +} +EXPORT_SYMBOL(linear_range_get_selector_high); diff --git a/include/linux/linear_range.h b/include/linux/linear_range.h new file mode 100644 index 000000000000..534ca59a308a --- /dev/null +++ b/include/linux/linear_range.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Copyright (C) 2020 ROHM Semiconductors */ + +#ifndef LINEAR_RANGE_H +#define LINEAR_RANGE_H + +#include <linux/types.h> + +/** + * struct linear_range - table of selector - value pairs + * + * Define a lookup-table for range of values. Intended to help when looking + * for a register value matching certaing physical measure (like voltage). + * Usable when increment of one in register always results a constant increment + * of the physical measure (like voltage). + * + * @min: Lowest value in range + * @min_sel: Lowest selector for range + * @max_sel: Highest selector for range + * @step: Value step size + */ +struct linear_range { + unsigned int min; + unsigned int min_sel; + unsigned int max_sel; + unsigned int step; +}; + +unsigned int linear_range_values_in_range(const struct linear_range *r); +unsigned int linear_range_values_in_range_array(const struct linear_range *r, + int ranges); +unsigned int linear_range_get_max_value(const struct linear_range *r); + +int linear_range_get_value(const struct linear_range *r, unsigned int selector, + unsigned int *val); +int linear_range_get_value_array(const struct linear_range *r, int ranges, + unsigned int selector, unsigned int *val); +int linear_range_get_selector_low(const struct linear_range *r, + unsigned int val, unsigned int *selector, + bool *found); +int linear_range_get_selector_high(const struct linear_range *r, + unsigned int val, unsigned int *selector, + bool *found); +int linear_range_get_selector_low_array(const struct linear_range *r, + int ranges, unsigned int val, + unsigned int *selector, bool *found); + +#endif -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 3/8] drivers: base: add linear ranges helpers 2020-02-20 7:35 ` [RFC PATCH v3 3/8] drivers: base: add linear ranges helpers Matti Vaittinen @ 2020-02-20 7:47 ` Randy Dunlap 2020-02-20 8:34 ` Vaittinen, Matti 0 siblings, 1 reply; 25+ messages in thread From: Randy Dunlap @ 2020-02-20 7:47 UTC (permalink / raw) To: Matti Vaittinen, mazziesaccount Cc: Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman, Rafael J. Wysocki, Liam Girdwood, Mark Brown, linux-pm, devicetree, linux-kernel, Markus Laine, Mikko Mutanen Hi, Here are some kernel-doc comments for you: On 2/19/20 11:35 PM, Matti Vaittinen wrote: > --- > drivers/base/Kconfig | 3 + > drivers/base/Makefile | 1 + > drivers/base/linear_ranges.c | 246 +++++++++++++++++++++++++++++++++++ > include/linux/linear_range.h | 48 +++++++ > 4 files changed, 298 insertions(+) > create mode 100644 drivers/base/linear_ranges.c > create mode 100644 include/linux/linear_range.h > diff --git a/drivers/base/linear_ranges.c b/drivers/base/linear_ranges.c > new file mode 100644 > index 000000000000..5fa3b96bf2b8 > --- /dev/null > +++ b/drivers/base/linear_ranges.c > @@ -0,0 +1,246 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * linear_ranges.c -- helpers to map values in a linear range to range index > + * > + * Original idea borrowed from regulator framework > + * > + * It might be useful if we could support also inversely proportional ranges? > + * Copyright 2020 ROHM Semiconductors > + */ > + > +#include <linux/errno.h> > +#include <linux/export.h> > +#include <linux/kernel.h> > +#include <linux/linear_range.h> > + > +/** > + * linear_range_values_in_range - return the amount of values in a range > + * > + * @r: pointer to linear range where values are counted > + * > + * Compute the amount of values in range pointed by @r. Note, values can > + * be all equal - range with selectors 0,...,2 with step 0 still contains > + * 3 values even though they are all equal. > + * > + * Returns the amount of values in range pointed by @r * Return: ... > + */ > + > +/** > + * linear_range_values_in_range_array - return the amount of values in ranges > + * > + * @r: pointer to array of linear ranges where values are counted > + * @ranges: amount of ranges we include in computation. > + * > + * Compute the amount of values in ranges pointed by @r. Note, values can > + * be all equal - range with selectors 0,...,2 with step 0 still contains > + * 3 values even though they are all equal. > + * > + * Returns the amount of values in first @ranges ranges pointed by @r * Return: ... > + */ > + > +/** > + * linear_range_get_max_value - return the largest value in a range > + * > + * @r: pointer to linear range where value is looked from > + * > + * Returns the largest value in the given range ditto. > + */ > + > +/** > + * linear_range_get_value - fetch a value from given range > + * > + * @r: pointer to linear range where value is looked from > + * @selector: selector for which the value is searched > + * @val: address where found value is updated > + * > + * Search given ranges for value which matches given selector. > + * > + * Returns 0 on success, -EINVAL given selector is not found from any of the ditto. > + * ranges. > + */ > + > +/** > + * linear_range_get_value_array - fetch a value from array of ranges > + * > + * @r: pointer to array of linear ranges where value is looked from > + * @ranges: amount of ranges in an array > + * @selector: selector for which the value is searched > + * @val: address where found value is updated > + * > + * Search through an array of ranges for value which matches given selector. > + * > + * Returns 0 on success, -EINVAL given selector is not found from any of the same, again. > + * ranges. > + */ > + > +/** > + * linear_range_get_selector_low - return linear range selector for value > + * > + * @r: pointer to linear range where selector is looked from > + * @val: value for which the selcetor is searched selector > + * @selector: address where found selector value is updated > + * @found: flag to indicate that given value was in the range > + * > + * Return selector which which range value is closest match for given * Return: > + * input value. Value is matching if it is equal or smaller than given > + * value. If given value is in the range, then @found is set true. > + * > + * Returns 0 on success, -EINVAL if range is invalid or does not contain > + * value smaller or equal to given value > + */ > +int linear_range_get_selector_low(const struct linear_range *r, > + unsigned int val, unsigned int *selector, > + bool *found) > +{ > + *found = false; > + > + if (r->min > val) > + return -EINVAL; > + > + if (linear_range_get_max_value(r) >= val) > + *found = true; > + > + if (!r->step) > + *selector = r->min_sel; > + else > + *selector = (val - r->min) / r->step + r->min_sel; > + > + return 0; > +} > +EXPORT_SYMBOL(linear_range_get_selector_low); > + > +/** > + * linear_range_get_selector_low_array - return linear range selector for value > + * > + * @r: pointer to array of linear ranges where selector is looked from > + * @ranges: amount of ranges to scan from array > + * @val: value for which the selcetor is searched selector > + * @selector: address where found selector value is updated > + * @found: flag to indicate that given value was in the range > + * > + * Return Scan array of ranges for selector which which range value matches drop "Return" ? > + * given input value. Value is matching if it is equal or smaller than given > + * value. If given value is found to be in a range scannins is stopped and scanning > + * @found is set true. If a range with values smaller than given value is found > + * but the range max is being smaller than given value, then the ranges > + * biggest selector is updated to @selector but scanning ranges is continued > + * and @found is set to false. > + * > + * Returns 0 on success, -EINVAL if range array is invalid or does not contain * Return: > + * range with a value smaller or equal to given value > + */ > + > +/** > + * linear_range_get_selector_high - return linear range selector for value > + * > + * @r: pointer to linear range where selector is looked from > + * @val: value for which the selcetor is searched selector > + * @selector: address where found selector value is updated > + * @found: flag to indicate that given value was in the range > + * > + * Return selector which which range value is closest match for given > + * input value. Value is matching if it is equal or higher than given > + * value. If given value is in the range, then @found is set true. > + * > + * Returns 0 on success, -EINVAL if range is invalid or does not contain * Return: > + * value greater or equal to given value > + */ cheers. -- ~Randy ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 3/8] drivers: base: add linear ranges helpers 2020-02-20 7:47 ` Randy Dunlap @ 2020-02-20 8:34 ` Vaittinen, Matti 0 siblings, 0 replies; 25+ messages in thread From: Vaittinen, Matti @ 2020-02-20 8:34 UTC (permalink / raw) To: mazziesaccount@gmail.com, rdunlap@infradead.org Cc: rafael@kernel.org, gregkh@linuxfoundation.org, mark.rutland@arm.com, devicetree@vger.kernel.org, broonie@kernel.org, linux-kernel@vger.kernel.org, sre@kernel.org, Laine, Markus, lgirdwood@gmail.com, linux-pm@vger.kernel.org, robh+dt@kernel.org, Mutanen, Mikko Thanks for taking a look at this Randy :) Highly appreciated. On Wed, 2020-02-19 at 23:47 -0800, Randy Dunlap wrote: > Hi, > Here are some kernel-doc comments for you: I agreed with all the comments - I'll fix them for next version. > On 2/19/20 11:35 PM, Matti Vaittinen wrote: > > --- > > drivers/base/Kconfig | 3 + > > drivers/base/Makefile | 1 + > > drivers/base/linear_ranges.c | 246 > > +++++++++++++++++++++++++++++++++++ > > include/linux/linear_range.h | 48 +++++++ > > 4 files changed, 298 insertions(+) > > create mode 100644 drivers/base/linear_ranges.c > > create mode 100644 include/linux/linear_range.h > > diff --git a/drivers/base/linear_ranges.c > > b/drivers/base/linear_ranges.c > > new file mode 100644 > > index 000000000000..5fa3b96bf2b8 > > --- /dev/null > > +++ b/drivers/base/linear_ranges.c Best Regards, Matti Vaittinen ^ permalink raw reply [flat|nested] 25+ messages in thread
* [RFC PATCH v3 4/8] regulator: rename regulator_linear_range to linear_range 2020-02-20 7:33 ` Matti Vaittinen (?) @ 2020-02-20 7:36 ` Matti Vaittinen -1 siblings, 0 replies; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:36 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman, Rafael J. Wysocki, Liam Girdwood, Mark Brown, Chen-Yu Tsai, Support Opensource, Charles Keepax, Richard Fitzgerald, Milo Kim, Bartosz Golaszewski, Andrei Stefanescu, Matthias Brugger, Tony Lindgren, Andy Gross, Bjorn Andersson, Sangbeom Kim, Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz, GitAuthor: Matti Vaittinen, linux-pm, devicetree, linux-kernel, patches, linux-arm-kernel, linux-mediatek, linux-omap, linux-arm-msm, linux-samsung-soc, Markus Laine, Mikko Mutanen Rename the "regulator_linear_range" to more generic linear_range as a first step towards converting the "regulator_linear_range" to common helpers. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- drivers/regulator/88pg86x.c | 4 +- drivers/regulator/88pm800-regulator.c | 4 +- drivers/regulator/act8865-regulator.c | 4 +- drivers/regulator/act8945a-regulator.c | 2 +- drivers/regulator/arizona-ldo1.c | 2 +- drivers/regulator/arizona-micsupp.c | 4 +- drivers/regulator/as3711-regulator.c | 6 +-- drivers/regulator/as3722-regulator.c | 4 +- drivers/regulator/axp20x-regulator.c | 16 +++--- drivers/regulator/bcm590xx-regulator.c | 8 +-- drivers/regulator/bd70528-regulator.c | 8 +-- drivers/regulator/bd718x7-regulator.c | 26 ++++----- drivers/regulator/da903x.c | 2 +- drivers/regulator/helpers.c | 8 +-- drivers/regulator/hi6421-regulator.c | 4 +- drivers/regulator/lochnagar-regulator.c | 4 +- drivers/regulator/lp873x-regulator.c | 4 +- drivers/regulator/lp87565-regulator.c | 2 +- drivers/regulator/lp8788-buck.c | 2 +- drivers/regulator/max77650-regulator.c | 2 +- drivers/regulator/mcp16502.c | 4 +- drivers/regulator/mt6323-regulator.c | 6 +-- drivers/regulator/mt6358-regulator.c | 8 +-- drivers/regulator/mt6380-regulator.c | 6 +-- drivers/regulator/mt6397-regulator.c | 6 +-- drivers/regulator/palmas-regulator.c | 4 +- drivers/regulator/qcom-rpmh-regulator.c | 2 +- drivers/regulator/qcom_rpm-regulator.c | 14 ++--- drivers/regulator/qcom_smd-regulator.c | 70 ++++++++++++------------- drivers/regulator/rk808-regulator.c | 10 ++-- drivers/regulator/s2mps11.c | 14 ++--- drivers/regulator/sky81452-regulator.c | 2 +- drivers/regulator/stpmic1_regulator.c | 18 +++---- drivers/regulator/tps65086-regulator.c | 10 ++-- drivers/regulator/tps65217-regulator.c | 4 +- drivers/regulator/tps65218-regulator.c | 6 +-- drivers/regulator/tps65912-regulator.c | 4 +- drivers/regulator/twl-regulator.c | 4 +- drivers/regulator/twl6030-regulator.c | 2 +- drivers/regulator/wm831x-dcdc.c | 2 +- drivers/regulator/wm831x-ldo.c | 4 +- drivers/regulator/wm8350-regulator.c | 2 +- drivers/regulator/wm8400-regulator.c | 2 +- include/linux/regulator/driver.h | 8 +-- 44 files changed, 164 insertions(+), 164 deletions(-) diff --git a/drivers/regulator/88pg86x.c b/drivers/regulator/88pg86x.c index d5ef55c81185..71cfa2c5de5e 100644 --- a/drivers/regulator/88pg86x.c +++ b/drivers/regulator/88pg86x.c @@ -11,13 +11,13 @@ static const struct regulator_ops pg86x_ops = { .list_voltage = regulator_list_voltage_linear_range, }; -static const struct regulator_linear_range pg86x_buck1_ranges[] = { +static const struct linear_range pg86x_buck1_ranges[] = { REGULATOR_LINEAR_RANGE( 0, 0, 10, 0), REGULATOR_LINEAR_RANGE(1000000, 11, 34, 25000), REGULATOR_LINEAR_RANGE(1600000, 35, 47, 50000), }; -static const struct regulator_linear_range pg86x_buck2_ranges[] = { +static const struct linear_range pg86x_buck2_ranges[] = { REGULATOR_LINEAR_RANGE( 0, 0, 15, 0), REGULATOR_LINEAR_RANGE(1000000, 16, 39, 25000), REGULATOR_LINEAR_RANGE(1600000, 40, 52, 50000), diff --git a/drivers/regulator/88pm800-regulator.c b/drivers/regulator/88pm800-regulator.c index 69ae25886181..d08ee81ed1ac 100644 --- a/drivers/regulator/88pm800-regulator.c +++ b/drivers/regulator/88pm800-regulator.c @@ -134,13 +134,13 @@ struct pm800_regulator_info { } /* Ranges are sorted in ascending order. */ -static const struct regulator_linear_range buck1_volt_range[] = { +static const struct linear_range buck1_volt_range[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500), REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x54, 50000), }; /* BUCK 2~5 have same ranges. */ -static const struct regulator_linear_range buck2_5_volt_range[] = { +static const struct linear_range buck2_5_volt_range[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500), REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x72, 50000), }; diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index 0fa97f934df4..19b9742c9ecc 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -220,13 +220,13 @@ static const struct regmap_config act8865_regmap_config = { .val_bits = 8, }; -static const struct regulator_linear_range act8865_voltage_ranges[] = { +static const struct linear_range act8865_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), }; -static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = { +static const struct linear_range act8600_sudcdc_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0), REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000), REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000), diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c index d2f804dbc785..6a62f946ccae 100644 --- a/drivers/regulator/act8945a-regulator.c +++ b/drivers/regulator/act8945a-regulator.c @@ -73,7 +73,7 @@ struct act8945a_pmic { u32 op_mode[ACT8945A_ID_MAX]; }; -static const struct regulator_linear_range act8945a_voltage_ranges[] = { +static const struct linear_range act8945a_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index 1a3d7b720f5e..ade0bef4569d 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -87,7 +87,7 @@ static const struct regulator_ops arizona_ldo1_hc_ops = { .set_bypass = regulator_set_bypass_regmap, }; -static const struct regulator_linear_range arizona_ldo1_hc_ranges[] = { +static const struct linear_range arizona_ldo1_hc_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 0x6, 50000), REGULATOR_LINEAR_RANGE(1800000, 0x7, 0x7, 0), }; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index ae1a5de3e57d..f6cfd3f6f0dd 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -125,7 +125,7 @@ static const struct regulator_ops arizona_micsupp_ops = { .set_bypass = arizona_micsupp_set_bypass, }; -static const struct regulator_linear_range arizona_micsupp_ranges[] = { +static const struct linear_range arizona_micsupp_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 0x1e, 50000), REGULATOR_LINEAR_RANGE(3300000, 0x1f, 0x1f, 0), }; @@ -152,7 +152,7 @@ static const struct regulator_desc arizona_micsupp = { .owner = THIS_MODULE, }; -static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = { +static const struct linear_range arizona_micsupp_ext_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 0x14, 25000), REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000), }; diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c index ece88103f2fd..b6b9206969ae 100644 --- a/drivers/regulator/as3711-regulator.c +++ b/drivers/regulator/as3711-regulator.c @@ -103,18 +103,18 @@ static const struct regulator_ops as3711_dldo_ops = { .map_voltage = regulator_map_voltage_linear_range, }; -static const struct regulator_linear_range as3711_sd_ranges[] = { +static const struct linear_range as3711_sd_ranges[] = { REGULATOR_LINEAR_RANGE(612500, 0x1, 0x40, 12500), REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7f, 50000), }; -static const struct regulator_linear_range as3711_aldo_ranges[] = { +static const struct linear_range as3711_aldo_ranges[] = { REGULATOR_LINEAR_RANGE(1200000, 0, 0xf, 50000), REGULATOR_LINEAR_RANGE(1800000, 0x10, 0x1f, 100000), }; -static const struct regulator_linear_range as3711_dldo_ranges[] = { +static const struct linear_range as3711_dldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 0x10, 50000), REGULATOR_LINEAR_RANGE(1750000, 0x20, 0x3f, 50000), }; diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c index bd5d0bacb08d..33ca197860b3 100644 --- a/drivers/regulator/as3722-regulator.c +++ b/drivers/regulator/as3722-regulator.c @@ -389,7 +389,7 @@ static const struct regulator_ops as3722_ldo6_extcntrl_ops = { .set_bypass = regulator_set_bypass_regmap, }; -static const struct regulator_linear_range as3722_ldo_ranges[] = { +static const struct linear_range as3722_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0), REGULATOR_LINEAR_RANGE(825000, 0x01, 0x24, 25000), REGULATOR_LINEAR_RANGE(1725000, 0x40, 0x7F, 25000), @@ -487,7 +487,7 @@ static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs) return false; } -static const struct regulator_linear_range as3722_sd2345_ranges[] = { +static const struct linear_range as3722_sd2345_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0), REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500), REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 16f0c8570036..7b3dc37130f3 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -512,7 +512,7 @@ static const struct regulator_ops axp20x_ops_sw = { .is_enabled = regulator_is_enabled_regmap, }; -static const struct regulator_linear_range axp20x_ldo4_ranges[] = { +static const struct linear_range axp20x_ldo4_ranges[] = { REGULATOR_LINEAR_RANGE(1250000, AXP20X_LDO4_V_OUT_1250mV_START, AXP20X_LDO4_V_OUT_1250mV_END, @@ -640,7 +640,7 @@ static const struct regulator_desc axp22x_drivevbus_regulator = { }; /* DCDC ranges shared with AXP813 */ -static const struct regulator_linear_range axp803_dcdc234_ranges[] = { +static const struct linear_range axp803_dcdc234_ranges[] = { REGULATOR_LINEAR_RANGE(500000, AXP803_DCDC234_500mV_START, AXP803_DCDC234_500mV_END, @@ -651,7 +651,7 @@ static const struct regulator_linear_range axp803_dcdc234_ranges[] = { 20000), }; -static const struct regulator_linear_range axp803_dcdc5_ranges[] = { +static const struct linear_range axp803_dcdc5_ranges[] = { REGULATOR_LINEAR_RANGE(800000, AXP803_DCDC5_800mV_START, AXP803_DCDC5_800mV_END, @@ -662,7 +662,7 @@ static const struct regulator_linear_range axp803_dcdc5_ranges[] = { 20000), }; -static const struct regulator_linear_range axp803_dcdc6_ranges[] = { +static const struct linear_range axp803_dcdc6_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP803_DCDC6_600mV_START, AXP803_DCDC6_600mV_END, @@ -674,7 +674,7 @@ static const struct regulator_linear_range axp803_dcdc6_ranges[] = { }; /* AXP806's CLDO2 and AXP809's DLDO1 share the same range */ -static const struct regulator_linear_range axp803_dldo2_ranges[] = { +static const struct linear_range axp803_dldo2_ranges[] = { REGULATOR_LINEAR_RANGE(700000, AXP803_DLDO2_700mV_START, AXP803_DLDO2_700mV_END, @@ -760,7 +760,7 @@ static const struct regulator_desc axp803_regulators[] = { AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc-ldo", "ips", 3000), }; -static const struct regulator_linear_range axp806_dcdca_ranges[] = { +static const struct linear_range axp806_dcdca_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP806_DCDCA_600mV_START, AXP806_DCDCA_600mV_END, @@ -771,7 +771,7 @@ static const struct regulator_linear_range axp806_dcdca_ranges[] = { 20000), }; -static const struct regulator_linear_range axp806_dcdcd_ranges[] = { +static const struct linear_range axp806_dcdcd_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP806_DCDCD_600mV_START, AXP806_DCDCD_600mV_END, @@ -836,7 +836,7 @@ static const struct regulator_desc axp806_regulators[] = { AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_SW_MASK), }; -static const struct regulator_linear_range axp809_dcdc4_ranges[] = { +static const struct linear_range axp809_dcdc4_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP809_DCDC4_600mV_START, AXP809_DCDC4_600mV_END, diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c index 8c98c3f07660..65e23fc5f9c3 100644 --- a/drivers/regulator/bcm590xx-regulator.c +++ b/drivers/regulator/bcm590xx-regulator.c @@ -116,14 +116,14 @@ static const unsigned int ldo_vbus[] = { }; /* DCDC group CSR: supported voltages in microvolts */ -static const struct regulator_linear_range dcdc_csr_ranges[] = { +static const struct linear_range dcdc_csr_ranges[] = { REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), REGULATOR_LINEAR_RANGE(1360000, 51, 55, 20000), REGULATOR_LINEAR_RANGE(900000, 56, 63, 0), }; /* DCDC group IOSR1: supported voltages in microvolts */ -static const struct regulator_linear_range dcdc_iosr1_ranges[] = { +static const struct linear_range dcdc_iosr1_ranges[] = { REGULATOR_LINEAR_RANGE(860000, 2, 51, 10000), REGULATOR_LINEAR_RANGE(1500000, 52, 52, 0), REGULATOR_LINEAR_RANGE(1800000, 53, 53, 0), @@ -131,7 +131,7 @@ static const struct regulator_linear_range dcdc_iosr1_ranges[] = { }; /* DCDC group SDSR1: supported voltages in microvolts */ -static const struct regulator_linear_range dcdc_sdsr1_ranges[] = { +static const struct linear_range dcdc_sdsr1_ranges[] = { REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), REGULATOR_LINEAR_RANGE(1340000, 51, 51, 0), REGULATOR_LINEAR_RANGE(900000, 52, 63, 0), @@ -143,7 +143,7 @@ struct bcm590xx_info { u8 n_voltages; const unsigned int *volt_table; u8 n_linear_ranges; - const struct regulator_linear_range *linear_ranges; + const struct linear_range *linear_ranges; }; #define BCM590XX_REG_TABLE(_name, _table) \ diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c index 5bf8a2dc5fe7..d44adf7e875a 100644 --- a/drivers/regulator/bd70528-regulator.c +++ b/drivers/regulator/bd70528-regulator.c @@ -20,22 +20,22 @@ #define BUCK_RAMPRATE_125MV 1 #define BUCK_RAMP_MAX 250 -static const struct regulator_linear_range bd70528_buck1_volts[] = { +static const struct linear_range bd70528_buck1_volts[] = { REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000), REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000), }; -static const struct regulator_linear_range bd70528_buck2_volts[] = { +static const struct linear_range bd70528_buck2_volts[] = { REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000), REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000), REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000), }; -static const struct regulator_linear_range bd70528_buck3_volts[] = { +static const struct linear_range bd70528_buck3_volts[] = { REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000), REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0), }; /* All LDOs have same voltage ranges */ -static const struct regulator_linear_range bd70528_ldo_volts[] = { +static const struct linear_range bd70528_ldo_volts[] = { REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000), REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000), REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000), diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c index 13a43eee2e46..d9bef74430d5 100644 --- a/drivers/regulator/bd718x7-regulator.c +++ b/drivers/regulator/bd718x7-regulator.c @@ -152,7 +152,7 @@ static const struct regulator_ops bd718xx_dvs_buck_regulator_ops = { * BD71847 BUCK1/2 * 0.70 to 1.30V (10mV step) */ -static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = { +static const struct linear_range bd718xx_dvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000), REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0), }; @@ -163,7 +163,7 @@ static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = { * and * 0.675 to 1.325 (range 1) */ -static const struct regulator_linear_range bd71837_buck5_volts[] = { +static const struct linear_range bd71837_buck5_volts[] = { /* Ranges when VOLT_SEL bit is 0 */ REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000), @@ -185,7 +185,7 @@ static const unsigned int bd71837_buck5_volt_range_sel[] = { /* * BD71847 BUCK3 */ -static const struct regulator_linear_range bd71847_buck3_volts[] = { +static const struct linear_range bd71847_buck3_volts[] = { /* Ranges when VOLT_SEL bits are 00 */ REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000), @@ -202,7 +202,7 @@ static const unsigned int bd71847_buck3_volt_range_sel[] = { 0x0, 0x0, 0x0, 0x40, 0x80, 0x80, 0x80 }; -static const struct regulator_linear_range bd71847_buck4_volts[] = { +static const struct linear_range bd71847_buck4_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(2600000, 0x00, 0x03, 100000), }; @@ -213,7 +213,7 @@ static const unsigned int bd71847_buck4_volt_range_sel[] = { 0x0, 0x40 }; * BUCK6 * 3.0V to 3.3V (step 100mV) */ -static const struct regulator_linear_range bd71837_buck6_volts[] = { +static const struct linear_range bd71837_buck6_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), }; @@ -237,7 +237,7 @@ static const unsigned int bd718xx_3rd_nodvs_buck_volts[] = { * BUCK8 * 0.8V to 1.40V (step 10mV) */ -static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = { +static const struct linear_range bd718xx_4th_nodvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000), }; @@ -245,7 +245,7 @@ static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = { * LDO1 * 3.0 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo1_volts[] = { +static const struct linear_range bd718xx_ldo1_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000), }; @@ -264,7 +264,7 @@ static const unsigned int ldo_2_volts[] = { * LDO3 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo3_volts[] = { +static const struct linear_range bd718xx_ldo3_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; @@ -272,7 +272,7 @@ static const struct regulator_linear_range bd718xx_ldo3_volts[] = { * LDO4 * 0.9 to 1.8V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo4_volts[] = { +static const struct linear_range bd718xx_ldo4_volts[] = { REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), }; @@ -280,7 +280,7 @@ static const struct regulator_linear_range bd718xx_ldo4_volts[] = { * LDO5 for BD71837 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo5_volts[] = { +static const struct linear_range bd71837_ldo5_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; @@ -288,7 +288,7 @@ static const struct regulator_linear_range bd71837_ldo5_volts[] = { * LDO5 for BD71837 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71847_ldo5_volts[] = { +static const struct linear_range bd71847_ldo5_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), REGULATOR_LINEAR_RANGE(800000, 0x00, 0x0F, 100000), }; @@ -299,7 +299,7 @@ static const unsigned int bd71847_ldo5_volt_range_sel[] = { 0x0, 0x20 }; * LDO6 * 0.9 to 1.8V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo6_volts[] = { +static const struct linear_range bd718xx_ldo6_volts[] = { REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), }; @@ -307,7 +307,7 @@ static const struct regulator_linear_range bd718xx_ldo6_volts[] = { * LDO7 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo7_volts[] = { +static const struct linear_range bd71837_ldo7_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index 5493c3a86426..770e694824ac 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -248,7 +248,7 @@ static int da9034_set_dvc_voltage_sel(struct regulator_dev *rdev, return ret; } -static const struct regulator_linear_range da9034_ldo12_ranges[] = { +static const struct linear_range da9034_ldo12_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 50000), REGULATOR_LINEAR_RANGE(2700000, 8, 15, 50000), }; diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index ca3dc3f3bb29..2c15df0484e5 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -403,7 +403,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_linear); int regulator_map_voltage_linear_range(struct regulator_dev *rdev, int min_uV, int max_uV) { - const struct regulator_linear_range *range; + const struct linear_range *range; int ret = -EINVAL; int voltage, i; @@ -466,7 +466,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range); int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev, int min_uV, int max_uV) { - const struct regulator_linear_range *range; + const struct linear_range *range; int ret = -EINVAL; int voltage, i; unsigned int selector = 0; @@ -559,7 +559,7 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_linear); int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev, unsigned int selector) { - const struct regulator_linear_range *range; + const struct linear_range *range; int i; unsigned int all_sels = 0; @@ -602,7 +602,7 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range); int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc, unsigned int selector) { - const struct regulator_linear_range *range; + const struct linear_range *range; int i; if (!desc->n_linear_ranges) { diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c index 5ac3d7c29725..66219d8dfc1a 100644 --- a/drivers/regulator/hi6421-regulator.c +++ b/drivers/regulator/hi6421-regulator.c @@ -87,7 +87,7 @@ static const unsigned int ldo_8_voltages[] = { }; /* Ranges are sorted in ascending order. */ -static const struct regulator_linear_range ldo_audio_volt_range[] = { +static const struct linear_range ldo_audio_volt_range[] = { REGULATOR_LINEAR_RANGE(2800000, 0, 3, 50000), REGULATOR_LINEAR_RANGE(3000000, 4, 7, 100000), }; @@ -195,7 +195,7 @@ static const struct regulator_ops hi6421_buck345_ops; * _id - LDO id name string * _match - of match name string * n_volt - number of votages available - * volt_ranges - array of regulator_linear_range + * volt_ranges - array of linear_range * vstep - voltage increase in each linear step in uV * vreg - voltage select register * vmask - voltage select mask diff --git a/drivers/regulator/lochnagar-regulator.c b/drivers/regulator/lochnagar-regulator.c index 9b05e03ba830..5ea3e4141684 100644 --- a/drivers/regulator/lochnagar-regulator.c +++ b/drivers/regulator/lochnagar-regulator.c @@ -36,7 +36,7 @@ static const struct regulator_ops lochnagar_micvdd_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, }; -static const struct regulator_linear_range lochnagar_micvdd_ranges[] = { +static const struct linear_range lochnagar_micvdd_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 0xC, 50000), REGULATOR_LINEAR_RANGE(1700000, 0xD, 0x1F, 100000), }; @@ -97,7 +97,7 @@ static const struct regulator_ops lochnagar_vddcore_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, }; -static const struct regulator_linear_range lochnagar_vddcore_ranges[] = { +static const struct linear_range lochnagar_vddcore_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0x8, 0x41, 12500), }; diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c index b55de293ca7a..fe049b67e7d5 100644 --- a/drivers/regulator/lp873x-regulator.c +++ b/drivers/regulator/lp873x-regulator.c @@ -54,14 +54,14 @@ struct lp873x_regulator { static const struct lp873x_regulator regulators[]; -static const struct regulator_linear_range buck0_buck1_ranges[] = { +static const struct linear_range buck0_buck1_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0), REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000), REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000), REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000), }; -static const struct regulator_linear_range ldo0_ldo1_ranges[] = { +static const struct linear_range ldo0_ldo1_ranges[] = { REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000), }; diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c index 4ae12ac1f4c6..5d525dacf959 100644 --- a/drivers/regulator/lp87565-regulator.c +++ b/drivers/regulator/lp87565-regulator.c @@ -46,7 +46,7 @@ struct lp87565_regulator { static const struct lp87565_regulator regulators[]; -static const struct regulator_linear_range buck0_1_2_3_ranges[] = { +static const struct linear_range buck0_1_2_3_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0xA, 0x17, 10000), REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000), REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000), diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c index 222502a29658..74b7b496b12d 100644 --- a/drivers/regulator/lp8788-buck.c +++ b/drivers/regulator/lp8788-buck.c @@ -92,7 +92,7 @@ struct lp8788_buck { }; /* BUCK 1 ~ 4 voltage ranges */ -static const struct regulator_linear_range buck_volt_ranges[] = { +static const struct linear_range buck_volt_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0, 0), REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000), }; diff --git a/drivers/regulator/max77650-regulator.c b/drivers/regulator/max77650-regulator.c index ac89a412f665..ca08f94a368d 100644 --- a/drivers/regulator/max77650-regulator.c +++ b/drivers/regulator/max77650-regulator.c @@ -49,7 +49,7 @@ static const unsigned int max77651_sbb1_volt_range_sel[] = { 0x0, 0x1, 0x2, 0x3 }; -static const struct regulator_linear_range max77651_sbb1_volt_ranges[] = { +static const struct linear_range max77651_sbb1_volt_ranges[] = { /* range index 0 */ REGULATOR_LINEAR_RANGE(2400000, 0x00, 0x0f, 50000), /* range index 1 */ diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c index e5a02711cb46..6d0ad74935b3 100644 --- a/drivers/regulator/mcp16502.c +++ b/drivers/regulator/mcp16502.c @@ -391,11 +391,11 @@ static const struct of_device_id mcp16502_ids[] = { }; MODULE_DEVICE_TABLE(of, mcp16502_ids); -static const struct regulator_linear_range b1l12_ranges[] = { +static const struct linear_range b1l12_ranges[] = { REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000), }; -static const struct regulator_linear_range b234_ranges[] = { +static const struct linear_range b234_ranges[] = { REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000), }; diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c index 893ea190788a..ff9016170db3 100644 --- a/drivers/regulator/mt6323-regulator.c +++ b/drivers/regulator/mt6323-regulator.c @@ -102,15 +102,15 @@ struct mt6323_regulator_info { .modeset_mask = _modeset_mask, \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), }; diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c index ba42682e06f3..13cb6ac9a892 100644 --- a/drivers/regulator/mt6358-regulator.c +++ b/drivers/regulator/mt6358-regulator.c @@ -137,19 +137,19 @@ struct mt6358_regulator_info { .qi = BIT(15), \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 12500), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), }; -static const struct regulator_linear_range buck_volt_range4[] = { +static const struct linear_range buck_volt_range4[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 0x7f, 12500), }; diff --git a/drivers/regulator/mt6380-regulator.c b/drivers/regulator/mt6380-regulator.c index b6aed090b5e0..9efd8710a6f3 100644 --- a/drivers/regulator/mt6380-regulator.c +++ b/drivers/regulator/mt6380-regulator.c @@ -152,15 +152,15 @@ struct mt6380_regulator_info { .modeset_mask = _modeset_mask, \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(1200000, 0, 0x3c, 25000), }; diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c index fd9ed864a0c1..269c2a6028e8 100644 --- a/drivers/regulator/mt6397-regulator.c +++ b/drivers/regulator/mt6397-regulator.c @@ -102,15 +102,15 @@ struct mt6397_regulator_info { .qi = BIT(15), \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(800000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 0x1f, 20000), }; diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 31325912d311..337dd614695e 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -22,14 +22,14 @@ #include <linux/of_platform.h> #include <linux/regulator/of_regulator.h> -static const struct regulator_linear_range smps_low_ranges[] = { +static const struct linear_range smps_low_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(500000, 0x1, 0x6, 0), REGULATOR_LINEAR_RANGE(510000, 0x7, 0x79, 10000), REGULATOR_LINEAR_RANGE(1650000, 0x7A, 0x7f, 0), }; -static const struct regulator_linear_range smps_high_ranges[] = { +static const struct linear_range smps_high_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x6, 0), REGULATOR_LINEAR_RANGE(1020000, 0x7, 0x79, 20000), diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index c86ad40015ce..953c7fba8d9d 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -86,7 +86,7 @@ enum rpmh_regulator_type { struct rpmh_vreg_hw_data { enum rpmh_regulator_type regulator_type; const struct regulator_ops *ops; - const struct regulator_linear_range voltage_range; + const struct linear_range voltage_range; int n_voltages; int hpm_min_load_uA; const int *pmic_mode_map; diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index 7407cd5a1b74..c15cceeebe45 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -148,41 +148,41 @@ static const struct rpm_reg_parts rpm8960_ncp_parts = { /* * Physically available PMIC regulator voltage ranges */ -static const struct regulator_linear_range pldo_ranges[] = { +static const struct linear_range pldo_ranges[] = { REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500), REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000), REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000), }; -static const struct regulator_linear_range nldo_ranges[] = { +static const struct linear_range nldo_ranges[] = { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), }; -static const struct regulator_linear_range nldo1200_ranges[] = { +static const struct linear_range nldo1200_ranges[] = { REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250), REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500), }; -static const struct regulator_linear_range smps_ranges[] = { +static const struct linear_range smps_ranges[] = { REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), }; -static const struct regulator_linear_range ftsmps_ranges[] = { +static const struct linear_range ftsmps_ranges[] = { REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000), REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500), REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000), }; -static const struct regulator_linear_range smb208_ranges[] = { +static const struct linear_range smb208_ranges[] = { REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000), }; -static const struct regulator_linear_range ncp_ranges[] = { +static const struct linear_range ncp_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000), }; diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index fff8d5fdef6a..34b5c62265a9 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -199,7 +199,7 @@ static const struct regulator_ops rpm_bob_ops = { }; static const struct regulator_desc pma8084_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), }, @@ -209,7 +209,7 @@ static const struct regulator_desc pma8084_hfsmps = { }; static const struct regulator_desc pma8084_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000), }, @@ -219,7 +219,7 @@ static const struct regulator_desc pma8084_ftsmps = { }; static const struct regulator_desc pma8084_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), @@ -230,7 +230,7 @@ static const struct regulator_desc pma8084_pldo = { }; static const struct regulator_desc pma8084_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), }, .n_linear_ranges = 1, @@ -243,7 +243,7 @@ static const struct regulator_desc pma8084_switch = { }; static const struct regulator_desc pm8x41_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1575000, 96, 158, 25000), }, @@ -253,7 +253,7 @@ static const struct regulator_desc pm8x41_hfsmps = { }; static const struct regulator_desc pm8841_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000), }, @@ -263,7 +263,7 @@ static const struct regulator_desc pm8841_ftsmps = { }; static const struct regulator_desc pm8941_boost = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000), }, .n_linear_ranges = 1, @@ -272,7 +272,7 @@ static const struct regulator_desc pm8941_boost = { }; static const struct regulator_desc pm8941_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), @@ -283,7 +283,7 @@ static const struct regulator_desc pm8941_pldo = { }; static const struct regulator_desc pm8941_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), }, .n_linear_ranges = 1, @@ -302,7 +302,7 @@ static const struct regulator_desc pm8941_switch = { }; static const struct regulator_desc pm8916_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500), }, .n_linear_ranges = 1, @@ -311,7 +311,7 @@ static const struct regulator_desc pm8916_pldo = { }; static const struct regulator_desc pm8916_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500), }, .n_linear_ranges = 1, @@ -320,7 +320,7 @@ static const struct regulator_desc pm8916_nldo = { }; static const struct regulator_desc pm8916_buck_lvo_smps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000), }, @@ -330,7 +330,7 @@ static const struct regulator_desc pm8916_buck_lvo_smps = { }; static const struct regulator_desc pm8916_buck_hvo_smps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000), }, .n_linear_ranges = 1, @@ -339,7 +339,7 @@ static const struct regulator_desc pm8916_buck_hvo_smps = { }; static const struct regulator_desc pm8950_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1550000, 96, 127, 25000), }, @@ -349,7 +349,7 @@ static const struct regulator_desc pm8950_hfsmps = { }; static const struct regulator_desc pm8950_ftsmps2p5 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(80000, 0, 255, 5000), REGULATOR_LINEAR_RANGE(160000, 256, 460, 10000), }, @@ -359,7 +359,7 @@ static const struct regulator_desc pm8950_ftsmps2p5 = { }; static const struct regulator_desc pm8950_ult_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 202, 12500), }, .n_linear_ranges = 1, @@ -368,7 +368,7 @@ static const struct regulator_desc pm8950_ult_nldo = { }; static const struct regulator_desc pm8950_ult_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1750000, 0, 127, 12500), }, .n_linear_ranges = 1, @@ -377,7 +377,7 @@ static const struct regulator_desc pm8950_ult_pldo = { }; static const struct regulator_desc pm8950_pldo_lv = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1500000, 0, 16, 25000), }, .n_linear_ranges = 1, @@ -386,7 +386,7 @@ static const struct regulator_desc pm8950_pldo_lv = { }; static const struct regulator_desc pm8950_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(975000, 0, 164, 12500), }, .n_linear_ranges = 1, @@ -396,7 +396,7 @@ static const struct regulator_desc pm8950_pldo = { static const struct regulator_desc pm8994_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), }, @@ -406,7 +406,7 @@ static const struct regulator_desc pm8994_hfsmps = { }; static const struct regulator_desc pm8994_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 199, 5000), REGULATOR_LINEAR_RANGE(700000, 200, 349, 10000), }, @@ -416,7 +416,7 @@ static const struct regulator_desc pm8994_ftsmps = { }; static const struct regulator_desc pm8994_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), }, .n_linear_ranges = 1, @@ -425,7 +425,7 @@ static const struct regulator_desc pm8994_nldo = { }; static const struct regulator_desc pm8994_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), @@ -446,7 +446,7 @@ static const struct regulator_desc pm8994_lnldo = { }; static const struct regulator_desc pm8998_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000), }, .n_linear_ranges = 1, @@ -455,7 +455,7 @@ static const struct regulator_desc pm8998_ftsmps = { }; static const struct regulator_desc pm8998_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000), }, .n_linear_ranges = 1, @@ -464,7 +464,7 @@ static const struct regulator_desc pm8998_hfsmps = { }; static const struct regulator_desc pm8998_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -473,7 +473,7 @@ static const struct regulator_desc pm8998_nldo = { }; static const struct regulator_desc pm8998_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000), }, .n_linear_ranges = 1, @@ -482,7 +482,7 @@ static const struct regulator_desc pm8998_pldo = { }; static const struct regulator_desc pm8998_pldo_lv = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -495,7 +495,7 @@ static const struct regulator_desc pm8998_switch = { }; static const struct regulator_desc pmi8998_bob = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000), }, .n_linear_ranges = 1, @@ -504,7 +504,7 @@ static const struct regulator_desc pmi8998_bob = { }; static const struct regulator_desc pms405_hfsmps3 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000), }, .n_linear_ranges = 1, @@ -513,7 +513,7 @@ static const struct regulator_desc pms405_hfsmps3 = { }; static const struct regulator_desc pms405_nldo300 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -522,7 +522,7 @@ static const struct regulator_desc pms405_nldo300 = { }; static const struct regulator_desc pms405_nldo1200 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -531,7 +531,7 @@ static const struct regulator_desc pms405_nldo1200 = { }; static const struct regulator_desc pms405_pldo50 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000), }, .n_linear_ranges = 1, @@ -540,7 +540,7 @@ static const struct regulator_desc pms405_pldo50 = { }; static const struct regulator_desc pms405_pldo150 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000), }, .n_linear_ranges = 1, @@ -549,7 +549,7 @@ static const struct regulator_desc pms405_pldo150 = { }; static const struct regulator_desc pms405_pldo600 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1256000, 0, 98, 8000), }, .n_linear_ranges = 1, diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 5b4003226484..b7a4cdbfd4c4 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -165,14 +165,14 @@ static const int rk808_buck_config_regs[] = { RK808_BUCK4_CONFIG_REG, }; -static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = { +static const struct linear_range rk808_ldo3_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000), REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0), }; #define RK809_BUCK5_SEL_CNT (8) -static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = { +static const struct linear_range rk809_buck5_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 0, 0), REGULATOR_LINEAR_RANGE(1800000, 1, 3, 200000), REGULATOR_LINEAR_RANGE(2800000, 4, 5, 200000), @@ -201,14 +201,14 @@ static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = { #define RK817_BUCK1_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK1_SEL1 + 1) #define RK817_BUCK3_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK3_SEL1 + 1) -static const struct regulator_linear_range rk817_buck1_voltage_ranges[] = { +static const struct linear_range rk817_buck1_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0, RK817_BUCK1_SEL0, RK817_BUCK1_STP0), REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1, RK817_BUCK1_SEL_CNT, RK817_BUCK1_STP1), }; -static const struct regulator_linear_range rk817_buck3_voltage_ranges[] = { +static const struct linear_range rk817_buck3_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0, RK817_BUCK1_SEL0, RK817_BUCK1_STP0), REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1, @@ -665,7 +665,7 @@ static const struct regulator_ops rk808_switch_ops = { .set_suspend_disable = rk808_set_suspend_disable, }; -static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = { +static const struct linear_range rk805_buck_1_2_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500), REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000), REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0), diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 4f2dc5ebffdc..44511c62edea 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -749,37 +749,37 @@ static const struct regulator_ops s2mps15_reg_buck_ops = { } /* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges1[] = { REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000), }; /* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges2[] = { REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000), }; /* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges3[] = { REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500), }; /* voltage range for s2mps15 LDO 7, 8, 9 and 10 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges4[] = { REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000), }; /* voltage range for s2mps15 LDO 1 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges5[] = { REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500), }; /* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */ -static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = { +static const struct linear_range s2mps15_buck_voltage_ranges1[] = { REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250), }; /* voltage range for s2mps15 BUCK 8, 9 and 10 */ -static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = { +static const struct linear_range s2mps15_buck_voltage_ranges2[] = { REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500), }; diff --git a/drivers/regulator/sky81452-regulator.c b/drivers/regulator/sky81452-regulator.c index 177dede82a61..37658affe072 100644 --- a/drivers/regulator/sky81452-regulator.c +++ b/drivers/regulator/sky81452-regulator.c @@ -32,7 +32,7 @@ static const struct regulator_ops sky81452_reg_ops = { .is_enabled = regulator_is_enabled_regmap, }; -static const struct regulator_linear_range sky81452_reg_ranges[] = { +static const struct linear_range sky81452_reg_ranges[] = { REGULATOR_LINEAR_RANGE(4500000, 0, 14, 250000), REGULATOR_LINEAR_RANGE(9000000, 15, 31, 1000000), }; diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c index f3d7d007ecbb..adc9973d1b2f 100644 --- a/drivers/regulator/stpmic1_regulator.c +++ b/drivers/regulator/stpmic1_regulator.c @@ -57,13 +57,13 @@ enum { /* Ramp delay worst case is (2250uV/uS) */ #define PMIC_RAMP_DELAY 2200 -static const struct regulator_linear_range buck1_ranges[] = { +static const struct linear_range buck1_ranges[] = { REGULATOR_LINEAR_RANGE(725000, 0, 4, 0), REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000), REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0), }; -static const struct regulator_linear_range buck2_ranges[] = { +static const struct linear_range buck2_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0), REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0), REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0), @@ -77,7 +77,7 @@ static const struct regulator_linear_range buck2_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0), }; -static const struct regulator_linear_range buck3_ranges[] = { +static const struct linear_range buck3_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0), REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0), REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0), @@ -87,7 +87,7 @@ static const struct regulator_linear_range buck3_ranges[] = { REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0), }; -static const struct regulator_linear_range buck4_ranges[] = { +static const struct linear_range buck4_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000), REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0), REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0), @@ -97,19 +97,19 @@ static const struct regulator_linear_range buck4_ranges[] = { REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0), }; -static const struct regulator_linear_range ldo1_ranges[] = { +static const struct linear_range ldo1_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), }; -static const struct regulator_linear_range ldo2_ranges[] = { +static const struct linear_range ldo2_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), }; -static const struct regulator_linear_range ldo3_ranges[] = { +static const struct linear_range ldo3_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), @@ -117,13 +117,13 @@ static const struct regulator_linear_range ldo3_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 31, 31, 0), }; -static const struct regulator_linear_range ldo5_ranges[] = { +static const struct linear_range ldo5_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000), REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0), }; -static const struct regulator_linear_range ldo6_ranges[] = { +static const struct linear_range ldo6_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), }; diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c index 5a5e9b5bf4be..9910e949373c 100644 --- a/drivers/regulator/tps65086-regulator.c +++ b/drivers/regulator/tps65086-regulator.c @@ -71,23 +71,23 @@ struct tps65086_regulator { unsigned int decay_mask; }; -static const struct regulator_linear_range tps65086_10mv_ranges[] = { +static const struct linear_range tps65086_10mv_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(410000, 0x1, 0x7F, 10000), }; -static const struct regulator_linear_range tps65086_buck126_25mv_ranges[] = { +static const struct linear_range tps65086_buck126_25mv_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x18, 0), REGULATOR_LINEAR_RANGE(1025000, 0x19, 0x7F, 25000), }; -static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = { +static const struct linear_range tps65086_buck345_25mv_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(425000, 0x1, 0x7F, 25000), }; -static const struct regulator_linear_range tps65086_ldoa1_ranges[] = { +static const struct linear_range tps65086_ldoa1_ranges[] = { REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000), REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xB, 100000), @@ -95,7 +95,7 @@ static const struct regulator_linear_range tps65086_ldoa1_ranges[] = { REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0), }; -static const struct regulator_linear_range tps65086_ldoa23_ranges[] = { +static const struct linear_range tps65086_ldoa23_ranges[] = { REGULATOR_LINEAR_RANGE(700000, 0x0, 0xD, 50000), REGULATOR_LINEAR_RANGE(1400000, 0xE, 0xF, 100000), }; diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c index 67ba78da77ec..d27dbbafcf72 100644 --- a/drivers/regulator/tps65217-regulator.c +++ b/drivers/regulator/tps65217-regulator.c @@ -56,14 +56,14 @@ static const unsigned int LDO1_VSEL_table[] = { 2800000, 3000000, 3100000, 3300000, }; -static const struct regulator_linear_range tps65217_uv1_ranges[] = { +static const struct linear_range tps65217_uv1_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 24, 25000), REGULATOR_LINEAR_RANGE(1550000, 25, 52, 50000), REGULATOR_LINEAR_RANGE(3000000, 53, 55, 100000), REGULATOR_LINEAR_RANGE(3300000, 56, 63, 0), }; -static const struct regulator_linear_range tps65217_uv2_ranges[] = { +static const struct linear_range tps65217_uv2_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 8, 50000), REGULATOR_LINEAR_RANGE(2000000, 9, 13, 100000), REGULATOR_LINEAR_RANGE(2450000, 14, 31, 50000), diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c index b72035610013..05d13f807918 100644 --- a/drivers/regulator/tps65218-regulator.c +++ b/drivers/regulator/tps65218-regulator.c @@ -56,17 +56,17 @@ .bypass_mask = _sm, \ } \ -static const struct regulator_linear_range dcdc1_dcdc2_ranges[] = { +static const struct linear_range dcdc1_dcdc2_ranges[] = { REGULATOR_LINEAR_RANGE(850000, 0x0, 0x32, 10000), REGULATOR_LINEAR_RANGE(1375000, 0x33, 0x3f, 25000), }; -static const struct regulator_linear_range ldo1_dcdc3_ranges[] = { +static const struct linear_range ldo1_dcdc3_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0x0, 0x1a, 25000), REGULATOR_LINEAR_RANGE(1600000, 0x1b, 0x3f, 50000), }; -static const struct regulator_linear_range dcdc4_ranges[] = { +static const struct linear_range dcdc4_ranges[] = { REGULATOR_LINEAR_RANGE(1175000, 0x0, 0xf, 25000), REGULATOR_LINEAR_RANGE(1600000, 0x10, 0x34, 50000), }; diff --git a/drivers/regulator/tps65912-regulator.c b/drivers/regulator/tps65912-regulator.c index 276faeddc370..15c79931ea89 100644 --- a/drivers/regulator/tps65912-regulator.c +++ b/drivers/regulator/tps65912-regulator.c @@ -46,11 +46,11 @@ enum tps65912_regulators { DCDC1, DCDC2, DCDC3, DCDC4, LDO1, LDO2, LDO3, .n_linear_ranges = ARRAY_SIZE(_lr), \ } -static const struct regulator_linear_range tps65912_dcdc_ranges[] = { +static const struct linear_range tps65912_dcdc_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 0x0, 0x3f, 50000), }; -static const struct regulator_linear_range tps65912_ldo_ranges[] = { +static const struct linear_range tps65912_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 25000), REGULATOR_LINEAR_RANGE(1650000, 0x21, 0x3c, 50000), REGULATOR_LINEAR_RANGE(3100000, 0x3d, 0x3f, 100000), diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 866b4dd01da9..4a51cfea45ac 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -360,12 +360,12 @@ static const u16 VINTANA2_VSEL_table[] = { }; /* 600mV to 1450mV in 12.5 mV steps */ -static const struct regulator_linear_range VDD1_ranges[] = { +static const struct linear_range VDD1_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500) }; /* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */ -static const struct regulator_linear_range VDD2_ranges[] = { +static const struct linear_range VDD2_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500), REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500) }; diff --git a/drivers/regulator/twl6030-regulator.c b/drivers/regulator/twl6030-regulator.c index b8100c3cedad..f7db250a7583 100644 --- a/drivers/regulator/twl6030-regulator.c +++ b/drivers/regulator/twl6030-regulator.c @@ -495,7 +495,7 @@ static const struct regulator_ops twlsmps_ops = { }; /*----------------------------------------------------------------------*/ -static const struct regulator_linear_range twl6030ldo_linear_range[] = { +static const struct linear_range twl6030ldo_linear_range[] = { REGULATOR_LINEAR_RANGE(0, 0, 0, 0), REGULATOR_LINEAR_RANGE(1000000, 1, 24, 100000), REGULATOR_LINEAR_RANGE(2750000, 31, 31, 0), diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 018dbbd96771..ad2203d11a88 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -204,7 +204,7 @@ static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data) * BUCKV specifics */ -static const struct regulator_linear_range wm831x_buckv_ranges[] = { +static const struct linear_range wm831x_buckv_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0x7, 0), REGULATOR_LINEAR_RANGE(600000, 0x8, 0x68, 12500), }; diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 56754686c982..7b6cf4810cb7 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -59,7 +59,7 @@ static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data) * General purpose LDOs */ -static const struct regulator_linear_range wm831x_gp_ldo_ranges[] = { +static const struct linear_range wm831x_gp_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000), REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000), }; @@ -312,7 +312,7 @@ static struct platform_driver wm831x_gp_ldo_driver = { * Analogue LDOs */ -static const struct regulator_linear_range wm831x_aldo_ranges[] = { +static const struct linear_range wm831x_aldo_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 12, 50000), REGULATOR_LINEAR_RANGE(1700000, 13, 31, 100000), }; diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 56d6168a888d..ae5f0e7fce8b 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -470,7 +470,7 @@ static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev, return 0; } -static const struct regulator_linear_range wm8350_ldo_ranges[] = { +static const struct linear_range wm8350_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 15, 50000), REGULATOR_LINEAR_RANGE(1800000, 16, 31, 100000), }; diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index 6f331b51e479..4cb1fbb59722 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -13,7 +13,7 @@ #include <linux/regulator/driver.h> #include <linux/mfd/wm8400-private.h> -static const struct regulator_linear_range wm8400_ldo_ranges[] = { +static const struct linear_range wm8400_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000), REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000), }; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 9a911bb5fb61..8419a4321775 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -40,7 +40,7 @@ enum regulator_status { }; /** - * struct regulator_linear_range - specify linear voltage ranges + * struct linear_range - specify linear voltage ranges * * Specify a range of voltages for regulator_map_linear_range() and * regulator_list_linear_range(). @@ -50,14 +50,14 @@ enum regulator_status { * @max_sel: Highest selector for range * @uV_step: Step size */ -struct regulator_linear_range { +struct linear_range { unsigned int min_uV; unsigned int min_sel; unsigned int max_sel; unsigned int uV_step; }; -/* Initialize struct regulator_linear_range */ +/* Initialize struct linear_range */ #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \ { \ .min_uV = _min_uV, \ @@ -348,7 +348,7 @@ struct regulator_desc { unsigned int ramp_delay; int min_dropout_uV; - const struct regulator_linear_range *linear_ranges; + const struct linear_range *linear_ranges; const unsigned int *linear_range_selectors; int n_linear_ranges; -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [RFC PATCH v3 4/8] regulator: rename regulator_linear_range to linear_range @ 2020-02-20 7:36 ` Matti Vaittinen 0 siblings, 0 replies; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:36 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Mark Rutland, Milo Kim, Andrei Stefanescu, Rafael J. Wysocki, Tony Lindgren, Sebastian Reichel, linux-samsung-soc, linux-omap, linux-pm, Krzysztof Kozlowski, Bartosz Golaszewski, Chen-Yu Tsai, Andy Gross, Markus Laine, devicetree, Charles Keepax, Bartlomiej Zolnierkiewicz, linux-arm-msm, Richard Fitzgerald, Mark Brown, linux-mediatek, Matthias Brugger, Bjorn Andersson, linux-arm-kernel, Support Opensource, Sangbeom Kim, Greg Kroah-Hartman, GitAuthor: Matti Vaittinen, Liam Girdwood, linux-kernel, Mikko Mutanen, Rob Herring, patches Rename the "regulator_linear_range" to more generic linear_range as a first step towards converting the "regulator_linear_range" to common helpers. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- drivers/regulator/88pg86x.c | 4 +- drivers/regulator/88pm800-regulator.c | 4 +- drivers/regulator/act8865-regulator.c | 4 +- drivers/regulator/act8945a-regulator.c | 2 +- drivers/regulator/arizona-ldo1.c | 2 +- drivers/regulator/arizona-micsupp.c | 4 +- drivers/regulator/as3711-regulator.c | 6 +-- drivers/regulator/as3722-regulator.c | 4 +- drivers/regulator/axp20x-regulator.c | 16 +++--- drivers/regulator/bcm590xx-regulator.c | 8 +-- drivers/regulator/bd70528-regulator.c | 8 +-- drivers/regulator/bd718x7-regulator.c | 26 ++++----- drivers/regulator/da903x.c | 2 +- drivers/regulator/helpers.c | 8 +-- drivers/regulator/hi6421-regulator.c | 4 +- drivers/regulator/lochnagar-regulator.c | 4 +- drivers/regulator/lp873x-regulator.c | 4 +- drivers/regulator/lp87565-regulator.c | 2 +- drivers/regulator/lp8788-buck.c | 2 +- drivers/regulator/max77650-regulator.c | 2 +- drivers/regulator/mcp16502.c | 4 +- drivers/regulator/mt6323-regulator.c | 6 +-- drivers/regulator/mt6358-regulator.c | 8 +-- drivers/regulator/mt6380-regulator.c | 6 +-- drivers/regulator/mt6397-regulator.c | 6 +-- drivers/regulator/palmas-regulator.c | 4 +- drivers/regulator/qcom-rpmh-regulator.c | 2 +- drivers/regulator/qcom_rpm-regulator.c | 14 ++--- drivers/regulator/qcom_smd-regulator.c | 70 ++++++++++++------------- drivers/regulator/rk808-regulator.c | 10 ++-- drivers/regulator/s2mps11.c | 14 ++--- drivers/regulator/sky81452-regulator.c | 2 +- drivers/regulator/stpmic1_regulator.c | 18 +++---- drivers/regulator/tps65086-regulator.c | 10 ++-- drivers/regulator/tps65217-regulator.c | 4 +- drivers/regulator/tps65218-regulator.c | 6 +-- drivers/regulator/tps65912-regulator.c | 4 +- drivers/regulator/twl-regulator.c | 4 +- drivers/regulator/twl6030-regulator.c | 2 +- drivers/regulator/wm831x-dcdc.c | 2 +- drivers/regulator/wm831x-ldo.c | 4 +- drivers/regulator/wm8350-regulator.c | 2 +- drivers/regulator/wm8400-regulator.c | 2 +- include/linux/regulator/driver.h | 8 +-- 44 files changed, 164 insertions(+), 164 deletions(-) diff --git a/drivers/regulator/88pg86x.c b/drivers/regulator/88pg86x.c index d5ef55c81185..71cfa2c5de5e 100644 --- a/drivers/regulator/88pg86x.c +++ b/drivers/regulator/88pg86x.c @@ -11,13 +11,13 @@ static const struct regulator_ops pg86x_ops = { .list_voltage = regulator_list_voltage_linear_range, }; -static const struct regulator_linear_range pg86x_buck1_ranges[] = { +static const struct linear_range pg86x_buck1_ranges[] = { REGULATOR_LINEAR_RANGE( 0, 0, 10, 0), REGULATOR_LINEAR_RANGE(1000000, 11, 34, 25000), REGULATOR_LINEAR_RANGE(1600000, 35, 47, 50000), }; -static const struct regulator_linear_range pg86x_buck2_ranges[] = { +static const struct linear_range pg86x_buck2_ranges[] = { REGULATOR_LINEAR_RANGE( 0, 0, 15, 0), REGULATOR_LINEAR_RANGE(1000000, 16, 39, 25000), REGULATOR_LINEAR_RANGE(1600000, 40, 52, 50000), diff --git a/drivers/regulator/88pm800-regulator.c b/drivers/regulator/88pm800-regulator.c index 69ae25886181..d08ee81ed1ac 100644 --- a/drivers/regulator/88pm800-regulator.c +++ b/drivers/regulator/88pm800-regulator.c @@ -134,13 +134,13 @@ struct pm800_regulator_info { } /* Ranges are sorted in ascending order. */ -static const struct regulator_linear_range buck1_volt_range[] = { +static const struct linear_range buck1_volt_range[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500), REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x54, 50000), }; /* BUCK 2~5 have same ranges. */ -static const struct regulator_linear_range buck2_5_volt_range[] = { +static const struct linear_range buck2_5_volt_range[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500), REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x72, 50000), }; diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index 0fa97f934df4..19b9742c9ecc 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -220,13 +220,13 @@ static const struct regmap_config act8865_regmap_config = { .val_bits = 8, }; -static const struct regulator_linear_range act8865_voltage_ranges[] = { +static const struct linear_range act8865_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), }; -static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = { +static const struct linear_range act8600_sudcdc_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0), REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000), REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000), diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c index d2f804dbc785..6a62f946ccae 100644 --- a/drivers/regulator/act8945a-regulator.c +++ b/drivers/regulator/act8945a-regulator.c @@ -73,7 +73,7 @@ struct act8945a_pmic { u32 op_mode[ACT8945A_ID_MAX]; }; -static const struct regulator_linear_range act8945a_voltage_ranges[] = { +static const struct linear_range act8945a_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index 1a3d7b720f5e..ade0bef4569d 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -87,7 +87,7 @@ static const struct regulator_ops arizona_ldo1_hc_ops = { .set_bypass = regulator_set_bypass_regmap, }; -static const struct regulator_linear_range arizona_ldo1_hc_ranges[] = { +static const struct linear_range arizona_ldo1_hc_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 0x6, 50000), REGULATOR_LINEAR_RANGE(1800000, 0x7, 0x7, 0), }; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index ae1a5de3e57d..f6cfd3f6f0dd 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -125,7 +125,7 @@ static const struct regulator_ops arizona_micsupp_ops = { .set_bypass = arizona_micsupp_set_bypass, }; -static const struct regulator_linear_range arizona_micsupp_ranges[] = { +static const struct linear_range arizona_micsupp_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 0x1e, 50000), REGULATOR_LINEAR_RANGE(3300000, 0x1f, 0x1f, 0), }; @@ -152,7 +152,7 @@ static const struct regulator_desc arizona_micsupp = { .owner = THIS_MODULE, }; -static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = { +static const struct linear_range arizona_micsupp_ext_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 0x14, 25000), REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000), }; diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c index ece88103f2fd..b6b9206969ae 100644 --- a/drivers/regulator/as3711-regulator.c +++ b/drivers/regulator/as3711-regulator.c @@ -103,18 +103,18 @@ static const struct regulator_ops as3711_dldo_ops = { .map_voltage = regulator_map_voltage_linear_range, }; -static const struct regulator_linear_range as3711_sd_ranges[] = { +static const struct linear_range as3711_sd_ranges[] = { REGULATOR_LINEAR_RANGE(612500, 0x1, 0x40, 12500), REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7f, 50000), }; -static const struct regulator_linear_range as3711_aldo_ranges[] = { +static const struct linear_range as3711_aldo_ranges[] = { REGULATOR_LINEAR_RANGE(1200000, 0, 0xf, 50000), REGULATOR_LINEAR_RANGE(1800000, 0x10, 0x1f, 100000), }; -static const struct regulator_linear_range as3711_dldo_ranges[] = { +static const struct linear_range as3711_dldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 0x10, 50000), REGULATOR_LINEAR_RANGE(1750000, 0x20, 0x3f, 50000), }; diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c index bd5d0bacb08d..33ca197860b3 100644 --- a/drivers/regulator/as3722-regulator.c +++ b/drivers/regulator/as3722-regulator.c @@ -389,7 +389,7 @@ static const struct regulator_ops as3722_ldo6_extcntrl_ops = { .set_bypass = regulator_set_bypass_regmap, }; -static const struct regulator_linear_range as3722_ldo_ranges[] = { +static const struct linear_range as3722_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0), REGULATOR_LINEAR_RANGE(825000, 0x01, 0x24, 25000), REGULATOR_LINEAR_RANGE(1725000, 0x40, 0x7F, 25000), @@ -487,7 +487,7 @@ static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs) return false; } -static const struct regulator_linear_range as3722_sd2345_ranges[] = { +static const struct linear_range as3722_sd2345_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0), REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500), REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 16f0c8570036..7b3dc37130f3 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -512,7 +512,7 @@ static const struct regulator_ops axp20x_ops_sw = { .is_enabled = regulator_is_enabled_regmap, }; -static const struct regulator_linear_range axp20x_ldo4_ranges[] = { +static const struct linear_range axp20x_ldo4_ranges[] = { REGULATOR_LINEAR_RANGE(1250000, AXP20X_LDO4_V_OUT_1250mV_START, AXP20X_LDO4_V_OUT_1250mV_END, @@ -640,7 +640,7 @@ static const struct regulator_desc axp22x_drivevbus_regulator = { }; /* DCDC ranges shared with AXP813 */ -static const struct regulator_linear_range axp803_dcdc234_ranges[] = { +static const struct linear_range axp803_dcdc234_ranges[] = { REGULATOR_LINEAR_RANGE(500000, AXP803_DCDC234_500mV_START, AXP803_DCDC234_500mV_END, @@ -651,7 +651,7 @@ static const struct regulator_linear_range axp803_dcdc234_ranges[] = { 20000), }; -static const struct regulator_linear_range axp803_dcdc5_ranges[] = { +static const struct linear_range axp803_dcdc5_ranges[] = { REGULATOR_LINEAR_RANGE(800000, AXP803_DCDC5_800mV_START, AXP803_DCDC5_800mV_END, @@ -662,7 +662,7 @@ static const struct regulator_linear_range axp803_dcdc5_ranges[] = { 20000), }; -static const struct regulator_linear_range axp803_dcdc6_ranges[] = { +static const struct linear_range axp803_dcdc6_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP803_DCDC6_600mV_START, AXP803_DCDC6_600mV_END, @@ -674,7 +674,7 @@ static const struct regulator_linear_range axp803_dcdc6_ranges[] = { }; /* AXP806's CLDO2 and AXP809's DLDO1 share the same range */ -static const struct regulator_linear_range axp803_dldo2_ranges[] = { +static const struct linear_range axp803_dldo2_ranges[] = { REGULATOR_LINEAR_RANGE(700000, AXP803_DLDO2_700mV_START, AXP803_DLDO2_700mV_END, @@ -760,7 +760,7 @@ static const struct regulator_desc axp803_regulators[] = { AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc-ldo", "ips", 3000), }; -static const struct regulator_linear_range axp806_dcdca_ranges[] = { +static const struct linear_range axp806_dcdca_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP806_DCDCA_600mV_START, AXP806_DCDCA_600mV_END, @@ -771,7 +771,7 @@ static const struct regulator_linear_range axp806_dcdca_ranges[] = { 20000), }; -static const struct regulator_linear_range axp806_dcdcd_ranges[] = { +static const struct linear_range axp806_dcdcd_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP806_DCDCD_600mV_START, AXP806_DCDCD_600mV_END, @@ -836,7 +836,7 @@ static const struct regulator_desc axp806_regulators[] = { AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_SW_MASK), }; -static const struct regulator_linear_range axp809_dcdc4_ranges[] = { +static const struct linear_range axp809_dcdc4_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP809_DCDC4_600mV_START, AXP809_DCDC4_600mV_END, diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c index 8c98c3f07660..65e23fc5f9c3 100644 --- a/drivers/regulator/bcm590xx-regulator.c +++ b/drivers/regulator/bcm590xx-regulator.c @@ -116,14 +116,14 @@ static const unsigned int ldo_vbus[] = { }; /* DCDC group CSR: supported voltages in microvolts */ -static const struct regulator_linear_range dcdc_csr_ranges[] = { +static const struct linear_range dcdc_csr_ranges[] = { REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), REGULATOR_LINEAR_RANGE(1360000, 51, 55, 20000), REGULATOR_LINEAR_RANGE(900000, 56, 63, 0), }; /* DCDC group IOSR1: supported voltages in microvolts */ -static const struct regulator_linear_range dcdc_iosr1_ranges[] = { +static const struct linear_range dcdc_iosr1_ranges[] = { REGULATOR_LINEAR_RANGE(860000, 2, 51, 10000), REGULATOR_LINEAR_RANGE(1500000, 52, 52, 0), REGULATOR_LINEAR_RANGE(1800000, 53, 53, 0), @@ -131,7 +131,7 @@ static const struct regulator_linear_range dcdc_iosr1_ranges[] = { }; /* DCDC group SDSR1: supported voltages in microvolts */ -static const struct regulator_linear_range dcdc_sdsr1_ranges[] = { +static const struct linear_range dcdc_sdsr1_ranges[] = { REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), REGULATOR_LINEAR_RANGE(1340000, 51, 51, 0), REGULATOR_LINEAR_RANGE(900000, 52, 63, 0), @@ -143,7 +143,7 @@ struct bcm590xx_info { u8 n_voltages; const unsigned int *volt_table; u8 n_linear_ranges; - const struct regulator_linear_range *linear_ranges; + const struct linear_range *linear_ranges; }; #define BCM590XX_REG_TABLE(_name, _table) \ diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c index 5bf8a2dc5fe7..d44adf7e875a 100644 --- a/drivers/regulator/bd70528-regulator.c +++ b/drivers/regulator/bd70528-regulator.c @@ -20,22 +20,22 @@ #define BUCK_RAMPRATE_125MV 1 #define BUCK_RAMP_MAX 250 -static const struct regulator_linear_range bd70528_buck1_volts[] = { +static const struct linear_range bd70528_buck1_volts[] = { REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000), REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000), }; -static const struct regulator_linear_range bd70528_buck2_volts[] = { +static const struct linear_range bd70528_buck2_volts[] = { REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000), REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000), REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000), }; -static const struct regulator_linear_range bd70528_buck3_volts[] = { +static const struct linear_range bd70528_buck3_volts[] = { REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000), REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0), }; /* All LDOs have same voltage ranges */ -static const struct regulator_linear_range bd70528_ldo_volts[] = { +static const struct linear_range bd70528_ldo_volts[] = { REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000), REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000), REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000), diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c index 13a43eee2e46..d9bef74430d5 100644 --- a/drivers/regulator/bd718x7-regulator.c +++ b/drivers/regulator/bd718x7-regulator.c @@ -152,7 +152,7 @@ static const struct regulator_ops bd718xx_dvs_buck_regulator_ops = { * BD71847 BUCK1/2 * 0.70 to 1.30V (10mV step) */ -static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = { +static const struct linear_range bd718xx_dvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000), REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0), }; @@ -163,7 +163,7 @@ static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = { * and * 0.675 to 1.325 (range 1) */ -static const struct regulator_linear_range bd71837_buck5_volts[] = { +static const struct linear_range bd71837_buck5_volts[] = { /* Ranges when VOLT_SEL bit is 0 */ REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000), @@ -185,7 +185,7 @@ static const unsigned int bd71837_buck5_volt_range_sel[] = { /* * BD71847 BUCK3 */ -static const struct regulator_linear_range bd71847_buck3_volts[] = { +static const struct linear_range bd71847_buck3_volts[] = { /* Ranges when VOLT_SEL bits are 00 */ REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000), @@ -202,7 +202,7 @@ static const unsigned int bd71847_buck3_volt_range_sel[] = { 0x0, 0x0, 0x0, 0x40, 0x80, 0x80, 0x80 }; -static const struct regulator_linear_range bd71847_buck4_volts[] = { +static const struct linear_range bd71847_buck4_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(2600000, 0x00, 0x03, 100000), }; @@ -213,7 +213,7 @@ static const unsigned int bd71847_buck4_volt_range_sel[] = { 0x0, 0x40 }; * BUCK6 * 3.0V to 3.3V (step 100mV) */ -static const struct regulator_linear_range bd71837_buck6_volts[] = { +static const struct linear_range bd71837_buck6_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), }; @@ -237,7 +237,7 @@ static const unsigned int bd718xx_3rd_nodvs_buck_volts[] = { * BUCK8 * 0.8V to 1.40V (step 10mV) */ -static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = { +static const struct linear_range bd718xx_4th_nodvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000), }; @@ -245,7 +245,7 @@ static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = { * LDO1 * 3.0 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo1_volts[] = { +static const struct linear_range bd718xx_ldo1_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000), }; @@ -264,7 +264,7 @@ static const unsigned int ldo_2_volts[] = { * LDO3 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo3_volts[] = { +static const struct linear_range bd718xx_ldo3_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; @@ -272,7 +272,7 @@ static const struct regulator_linear_range bd718xx_ldo3_volts[] = { * LDO4 * 0.9 to 1.8V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo4_volts[] = { +static const struct linear_range bd718xx_ldo4_volts[] = { REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), }; @@ -280,7 +280,7 @@ static const struct regulator_linear_range bd718xx_ldo4_volts[] = { * LDO5 for BD71837 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo5_volts[] = { +static const struct linear_range bd71837_ldo5_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; @@ -288,7 +288,7 @@ static const struct regulator_linear_range bd71837_ldo5_volts[] = { * LDO5 for BD71837 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71847_ldo5_volts[] = { +static const struct linear_range bd71847_ldo5_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), REGULATOR_LINEAR_RANGE(800000, 0x00, 0x0F, 100000), }; @@ -299,7 +299,7 @@ static const unsigned int bd71847_ldo5_volt_range_sel[] = { 0x0, 0x20 }; * LDO6 * 0.9 to 1.8V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo6_volts[] = { +static const struct linear_range bd718xx_ldo6_volts[] = { REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), }; @@ -307,7 +307,7 @@ static const struct regulator_linear_range bd718xx_ldo6_volts[] = { * LDO7 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo7_volts[] = { +static const struct linear_range bd71837_ldo7_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index 5493c3a86426..770e694824ac 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -248,7 +248,7 @@ static int da9034_set_dvc_voltage_sel(struct regulator_dev *rdev, return ret; } -static const struct regulator_linear_range da9034_ldo12_ranges[] = { +static const struct linear_range da9034_ldo12_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 50000), REGULATOR_LINEAR_RANGE(2700000, 8, 15, 50000), }; diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index ca3dc3f3bb29..2c15df0484e5 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -403,7 +403,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_linear); int regulator_map_voltage_linear_range(struct regulator_dev *rdev, int min_uV, int max_uV) { - const struct regulator_linear_range *range; + const struct linear_range *range; int ret = -EINVAL; int voltage, i; @@ -466,7 +466,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range); int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev, int min_uV, int max_uV) { - const struct regulator_linear_range *range; + const struct linear_range *range; int ret = -EINVAL; int voltage, i; unsigned int selector = 0; @@ -559,7 +559,7 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_linear); int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev, unsigned int selector) { - const struct regulator_linear_range *range; + const struct linear_range *range; int i; unsigned int all_sels = 0; @@ -602,7 +602,7 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range); int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc, unsigned int selector) { - const struct regulator_linear_range *range; + const struct linear_range *range; int i; if (!desc->n_linear_ranges) { diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c index 5ac3d7c29725..66219d8dfc1a 100644 --- a/drivers/regulator/hi6421-regulator.c +++ b/drivers/regulator/hi6421-regulator.c @@ -87,7 +87,7 @@ static const unsigned int ldo_8_voltages[] = { }; /* Ranges are sorted in ascending order. */ -static const struct regulator_linear_range ldo_audio_volt_range[] = { +static const struct linear_range ldo_audio_volt_range[] = { REGULATOR_LINEAR_RANGE(2800000, 0, 3, 50000), REGULATOR_LINEAR_RANGE(3000000, 4, 7, 100000), }; @@ -195,7 +195,7 @@ static const struct regulator_ops hi6421_buck345_ops; * _id - LDO id name string * _match - of match name string * n_volt - number of votages available - * volt_ranges - array of regulator_linear_range + * volt_ranges - array of linear_range * vstep - voltage increase in each linear step in uV * vreg - voltage select register * vmask - voltage select mask diff --git a/drivers/regulator/lochnagar-regulator.c b/drivers/regulator/lochnagar-regulator.c index 9b05e03ba830..5ea3e4141684 100644 --- a/drivers/regulator/lochnagar-regulator.c +++ b/drivers/regulator/lochnagar-regulator.c @@ -36,7 +36,7 @@ static const struct regulator_ops lochnagar_micvdd_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, }; -static const struct regulator_linear_range lochnagar_micvdd_ranges[] = { +static const struct linear_range lochnagar_micvdd_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 0xC, 50000), REGULATOR_LINEAR_RANGE(1700000, 0xD, 0x1F, 100000), }; @@ -97,7 +97,7 @@ static const struct regulator_ops lochnagar_vddcore_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, }; -static const struct regulator_linear_range lochnagar_vddcore_ranges[] = { +static const struct linear_range lochnagar_vddcore_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0x8, 0x41, 12500), }; diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c index b55de293ca7a..fe049b67e7d5 100644 --- a/drivers/regulator/lp873x-regulator.c +++ b/drivers/regulator/lp873x-regulator.c @@ -54,14 +54,14 @@ struct lp873x_regulator { static const struct lp873x_regulator regulators[]; -static const struct regulator_linear_range buck0_buck1_ranges[] = { +static const struct linear_range buck0_buck1_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0), REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000), REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000), REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000), }; -static const struct regulator_linear_range ldo0_ldo1_ranges[] = { +static const struct linear_range ldo0_ldo1_ranges[] = { REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000), }; diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c index 4ae12ac1f4c6..5d525dacf959 100644 --- a/drivers/regulator/lp87565-regulator.c +++ b/drivers/regulator/lp87565-regulator.c @@ -46,7 +46,7 @@ struct lp87565_regulator { static const struct lp87565_regulator regulators[]; -static const struct regulator_linear_range buck0_1_2_3_ranges[] = { +static const struct linear_range buck0_1_2_3_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0xA, 0x17, 10000), REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000), REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000), diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c index 222502a29658..74b7b496b12d 100644 --- a/drivers/regulator/lp8788-buck.c +++ b/drivers/regulator/lp8788-buck.c @@ -92,7 +92,7 @@ struct lp8788_buck { }; /* BUCK 1 ~ 4 voltage ranges */ -static const struct regulator_linear_range buck_volt_ranges[] = { +static const struct linear_range buck_volt_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0, 0), REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000), }; diff --git a/drivers/regulator/max77650-regulator.c b/drivers/regulator/max77650-regulator.c index ac89a412f665..ca08f94a368d 100644 --- a/drivers/regulator/max77650-regulator.c +++ b/drivers/regulator/max77650-regulator.c @@ -49,7 +49,7 @@ static const unsigned int max77651_sbb1_volt_range_sel[] = { 0x0, 0x1, 0x2, 0x3 }; -static const struct regulator_linear_range max77651_sbb1_volt_ranges[] = { +static const struct linear_range max77651_sbb1_volt_ranges[] = { /* range index 0 */ REGULATOR_LINEAR_RANGE(2400000, 0x00, 0x0f, 50000), /* range index 1 */ diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c index e5a02711cb46..6d0ad74935b3 100644 --- a/drivers/regulator/mcp16502.c +++ b/drivers/regulator/mcp16502.c @@ -391,11 +391,11 @@ static const struct of_device_id mcp16502_ids[] = { }; MODULE_DEVICE_TABLE(of, mcp16502_ids); -static const struct regulator_linear_range b1l12_ranges[] = { +static const struct linear_range b1l12_ranges[] = { REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000), }; -static const struct regulator_linear_range b234_ranges[] = { +static const struct linear_range b234_ranges[] = { REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000), }; diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c index 893ea190788a..ff9016170db3 100644 --- a/drivers/regulator/mt6323-regulator.c +++ b/drivers/regulator/mt6323-regulator.c @@ -102,15 +102,15 @@ struct mt6323_regulator_info { .modeset_mask = _modeset_mask, \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), }; diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c index ba42682e06f3..13cb6ac9a892 100644 --- a/drivers/regulator/mt6358-regulator.c +++ b/drivers/regulator/mt6358-regulator.c @@ -137,19 +137,19 @@ struct mt6358_regulator_info { .qi = BIT(15), \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 12500), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), }; -static const struct regulator_linear_range buck_volt_range4[] = { +static const struct linear_range buck_volt_range4[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 0x7f, 12500), }; diff --git a/drivers/regulator/mt6380-regulator.c b/drivers/regulator/mt6380-regulator.c index b6aed090b5e0..9efd8710a6f3 100644 --- a/drivers/regulator/mt6380-regulator.c +++ b/drivers/regulator/mt6380-regulator.c @@ -152,15 +152,15 @@ struct mt6380_regulator_info { .modeset_mask = _modeset_mask, \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(1200000, 0, 0x3c, 25000), }; diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c index fd9ed864a0c1..269c2a6028e8 100644 --- a/drivers/regulator/mt6397-regulator.c +++ b/drivers/regulator/mt6397-regulator.c @@ -102,15 +102,15 @@ struct mt6397_regulator_info { .qi = BIT(15), \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(800000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 0x1f, 20000), }; diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 31325912d311..337dd614695e 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -22,14 +22,14 @@ #include <linux/of_platform.h> #include <linux/regulator/of_regulator.h> -static const struct regulator_linear_range smps_low_ranges[] = { +static const struct linear_range smps_low_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(500000, 0x1, 0x6, 0), REGULATOR_LINEAR_RANGE(510000, 0x7, 0x79, 10000), REGULATOR_LINEAR_RANGE(1650000, 0x7A, 0x7f, 0), }; -static const struct regulator_linear_range smps_high_ranges[] = { +static const struct linear_range smps_high_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x6, 0), REGULATOR_LINEAR_RANGE(1020000, 0x7, 0x79, 20000), diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index c86ad40015ce..953c7fba8d9d 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -86,7 +86,7 @@ enum rpmh_regulator_type { struct rpmh_vreg_hw_data { enum rpmh_regulator_type regulator_type; const struct regulator_ops *ops; - const struct regulator_linear_range voltage_range; + const struct linear_range voltage_range; int n_voltages; int hpm_min_load_uA; const int *pmic_mode_map; diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index 7407cd5a1b74..c15cceeebe45 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -148,41 +148,41 @@ static const struct rpm_reg_parts rpm8960_ncp_parts = { /* * Physically available PMIC regulator voltage ranges */ -static const struct regulator_linear_range pldo_ranges[] = { +static const struct linear_range pldo_ranges[] = { REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500), REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000), REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000), }; -static const struct regulator_linear_range nldo_ranges[] = { +static const struct linear_range nldo_ranges[] = { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), }; -static const struct regulator_linear_range nldo1200_ranges[] = { +static const struct linear_range nldo1200_ranges[] = { REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250), REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500), }; -static const struct regulator_linear_range smps_ranges[] = { +static const struct linear_range smps_ranges[] = { REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), }; -static const struct regulator_linear_range ftsmps_ranges[] = { +static const struct linear_range ftsmps_ranges[] = { REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000), REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500), REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000), }; -static const struct regulator_linear_range smb208_ranges[] = { +static const struct linear_range smb208_ranges[] = { REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000), }; -static const struct regulator_linear_range ncp_ranges[] = { +static const struct linear_range ncp_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000), }; diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index fff8d5fdef6a..34b5c62265a9 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -199,7 +199,7 @@ static const struct regulator_ops rpm_bob_ops = { }; static const struct regulator_desc pma8084_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), }, @@ -209,7 +209,7 @@ static const struct regulator_desc pma8084_hfsmps = { }; static const struct regulator_desc pma8084_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000), }, @@ -219,7 +219,7 @@ static const struct regulator_desc pma8084_ftsmps = { }; static const struct regulator_desc pma8084_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), @@ -230,7 +230,7 @@ static const struct regulator_desc pma8084_pldo = { }; static const struct regulator_desc pma8084_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), }, .n_linear_ranges = 1, @@ -243,7 +243,7 @@ static const struct regulator_desc pma8084_switch = { }; static const struct regulator_desc pm8x41_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1575000, 96, 158, 25000), }, @@ -253,7 +253,7 @@ static const struct regulator_desc pm8x41_hfsmps = { }; static const struct regulator_desc pm8841_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000), }, @@ -263,7 +263,7 @@ static const struct regulator_desc pm8841_ftsmps = { }; static const struct regulator_desc pm8941_boost = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000), }, .n_linear_ranges = 1, @@ -272,7 +272,7 @@ static const struct regulator_desc pm8941_boost = { }; static const struct regulator_desc pm8941_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), @@ -283,7 +283,7 @@ static const struct regulator_desc pm8941_pldo = { }; static const struct regulator_desc pm8941_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), }, .n_linear_ranges = 1, @@ -302,7 +302,7 @@ static const struct regulator_desc pm8941_switch = { }; static const struct regulator_desc pm8916_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500), }, .n_linear_ranges = 1, @@ -311,7 +311,7 @@ static const struct regulator_desc pm8916_pldo = { }; static const struct regulator_desc pm8916_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500), }, .n_linear_ranges = 1, @@ -320,7 +320,7 @@ static const struct regulator_desc pm8916_nldo = { }; static const struct regulator_desc pm8916_buck_lvo_smps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000), }, @@ -330,7 +330,7 @@ static const struct regulator_desc pm8916_buck_lvo_smps = { }; static const struct regulator_desc pm8916_buck_hvo_smps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000), }, .n_linear_ranges = 1, @@ -339,7 +339,7 @@ static const struct regulator_desc pm8916_buck_hvo_smps = { }; static const struct regulator_desc pm8950_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1550000, 96, 127, 25000), }, @@ -349,7 +349,7 @@ static const struct regulator_desc pm8950_hfsmps = { }; static const struct regulator_desc pm8950_ftsmps2p5 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(80000, 0, 255, 5000), REGULATOR_LINEAR_RANGE(160000, 256, 460, 10000), }, @@ -359,7 +359,7 @@ static const struct regulator_desc pm8950_ftsmps2p5 = { }; static const struct regulator_desc pm8950_ult_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 202, 12500), }, .n_linear_ranges = 1, @@ -368,7 +368,7 @@ static const struct regulator_desc pm8950_ult_nldo = { }; static const struct regulator_desc pm8950_ult_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1750000, 0, 127, 12500), }, .n_linear_ranges = 1, @@ -377,7 +377,7 @@ static const struct regulator_desc pm8950_ult_pldo = { }; static const struct regulator_desc pm8950_pldo_lv = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1500000, 0, 16, 25000), }, .n_linear_ranges = 1, @@ -386,7 +386,7 @@ static const struct regulator_desc pm8950_pldo_lv = { }; static const struct regulator_desc pm8950_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(975000, 0, 164, 12500), }, .n_linear_ranges = 1, @@ -396,7 +396,7 @@ static const struct regulator_desc pm8950_pldo = { static const struct regulator_desc pm8994_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), }, @@ -406,7 +406,7 @@ static const struct regulator_desc pm8994_hfsmps = { }; static const struct regulator_desc pm8994_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 199, 5000), REGULATOR_LINEAR_RANGE(700000, 200, 349, 10000), }, @@ -416,7 +416,7 @@ static const struct regulator_desc pm8994_ftsmps = { }; static const struct regulator_desc pm8994_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), }, .n_linear_ranges = 1, @@ -425,7 +425,7 @@ static const struct regulator_desc pm8994_nldo = { }; static const struct regulator_desc pm8994_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), @@ -446,7 +446,7 @@ static const struct regulator_desc pm8994_lnldo = { }; static const struct regulator_desc pm8998_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000), }, .n_linear_ranges = 1, @@ -455,7 +455,7 @@ static const struct regulator_desc pm8998_ftsmps = { }; static const struct regulator_desc pm8998_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000), }, .n_linear_ranges = 1, @@ -464,7 +464,7 @@ static const struct regulator_desc pm8998_hfsmps = { }; static const struct regulator_desc pm8998_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -473,7 +473,7 @@ static const struct regulator_desc pm8998_nldo = { }; static const struct regulator_desc pm8998_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000), }, .n_linear_ranges = 1, @@ -482,7 +482,7 @@ static const struct regulator_desc pm8998_pldo = { }; static const struct regulator_desc pm8998_pldo_lv = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -495,7 +495,7 @@ static const struct regulator_desc pm8998_switch = { }; static const struct regulator_desc pmi8998_bob = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000), }, .n_linear_ranges = 1, @@ -504,7 +504,7 @@ static const struct regulator_desc pmi8998_bob = { }; static const struct regulator_desc pms405_hfsmps3 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000), }, .n_linear_ranges = 1, @@ -513,7 +513,7 @@ static const struct regulator_desc pms405_hfsmps3 = { }; static const struct regulator_desc pms405_nldo300 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -522,7 +522,7 @@ static const struct regulator_desc pms405_nldo300 = { }; static const struct regulator_desc pms405_nldo1200 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -531,7 +531,7 @@ static const struct regulator_desc pms405_nldo1200 = { }; static const struct regulator_desc pms405_pldo50 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000), }, .n_linear_ranges = 1, @@ -540,7 +540,7 @@ static const struct regulator_desc pms405_pldo50 = { }; static const struct regulator_desc pms405_pldo150 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000), }, .n_linear_ranges = 1, @@ -549,7 +549,7 @@ static const struct regulator_desc pms405_pldo150 = { }; static const struct regulator_desc pms405_pldo600 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1256000, 0, 98, 8000), }, .n_linear_ranges = 1, diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 5b4003226484..b7a4cdbfd4c4 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -165,14 +165,14 @@ static const int rk808_buck_config_regs[] = { RK808_BUCK4_CONFIG_REG, }; -static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = { +static const struct linear_range rk808_ldo3_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000), REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0), }; #define RK809_BUCK5_SEL_CNT (8) -static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = { +static const struct linear_range rk809_buck5_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 0, 0), REGULATOR_LINEAR_RANGE(1800000, 1, 3, 200000), REGULATOR_LINEAR_RANGE(2800000, 4, 5, 200000), @@ -201,14 +201,14 @@ static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = { #define RK817_BUCK1_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK1_SEL1 + 1) #define RK817_BUCK3_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK3_SEL1 + 1) -static const struct regulator_linear_range rk817_buck1_voltage_ranges[] = { +static const struct linear_range rk817_buck1_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0, RK817_BUCK1_SEL0, RK817_BUCK1_STP0), REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1, RK817_BUCK1_SEL_CNT, RK817_BUCK1_STP1), }; -static const struct regulator_linear_range rk817_buck3_voltage_ranges[] = { +static const struct linear_range rk817_buck3_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0, RK817_BUCK1_SEL0, RK817_BUCK1_STP0), REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1, @@ -665,7 +665,7 @@ static const struct regulator_ops rk808_switch_ops = { .set_suspend_disable = rk808_set_suspend_disable, }; -static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = { +static const struct linear_range rk805_buck_1_2_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500), REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000), REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0), diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 4f2dc5ebffdc..44511c62edea 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -749,37 +749,37 @@ static const struct regulator_ops s2mps15_reg_buck_ops = { } /* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges1[] = { REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000), }; /* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges2[] = { REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000), }; /* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges3[] = { REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500), }; /* voltage range for s2mps15 LDO 7, 8, 9 and 10 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges4[] = { REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000), }; /* voltage range for s2mps15 LDO 1 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges5[] = { REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500), }; /* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */ -static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = { +static const struct linear_range s2mps15_buck_voltage_ranges1[] = { REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250), }; /* voltage range for s2mps15 BUCK 8, 9 and 10 */ -static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = { +static const struct linear_range s2mps15_buck_voltage_ranges2[] = { REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500), }; diff --git a/drivers/regulator/sky81452-regulator.c b/drivers/regulator/sky81452-regulator.c index 177dede82a61..37658affe072 100644 --- a/drivers/regulator/sky81452-regulator.c +++ b/drivers/regulator/sky81452-regulator.c @@ -32,7 +32,7 @@ static const struct regulator_ops sky81452_reg_ops = { .is_enabled = regulator_is_enabled_regmap, }; -static const struct regulator_linear_range sky81452_reg_ranges[] = { +static const struct linear_range sky81452_reg_ranges[] = { REGULATOR_LINEAR_RANGE(4500000, 0, 14, 250000), REGULATOR_LINEAR_RANGE(9000000, 15, 31, 1000000), }; diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c index f3d7d007ecbb..adc9973d1b2f 100644 --- a/drivers/regulator/stpmic1_regulator.c +++ b/drivers/regulator/stpmic1_regulator.c @@ -57,13 +57,13 @@ enum { /* Ramp delay worst case is (2250uV/uS) */ #define PMIC_RAMP_DELAY 2200 -static const struct regulator_linear_range buck1_ranges[] = { +static const struct linear_range buck1_ranges[] = { REGULATOR_LINEAR_RANGE(725000, 0, 4, 0), REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000), REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0), }; -static const struct regulator_linear_range buck2_ranges[] = { +static const struct linear_range buck2_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0), REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0), REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0), @@ -77,7 +77,7 @@ static const struct regulator_linear_range buck2_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0), }; -static const struct regulator_linear_range buck3_ranges[] = { +static const struct linear_range buck3_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0), REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0), REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0), @@ -87,7 +87,7 @@ static const struct regulator_linear_range buck3_ranges[] = { REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0), }; -static const struct regulator_linear_range buck4_ranges[] = { +static const struct linear_range buck4_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000), REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0), REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0), @@ -97,19 +97,19 @@ static const struct regulator_linear_range buck4_ranges[] = { REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0), }; -static const struct regulator_linear_range ldo1_ranges[] = { +static const struct linear_range ldo1_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), }; -static const struct regulator_linear_range ldo2_ranges[] = { +static const struct linear_range ldo2_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), }; -static const struct regulator_linear_range ldo3_ranges[] = { +static const struct linear_range ldo3_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), @@ -117,13 +117,13 @@ static const struct regulator_linear_range ldo3_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 31, 31, 0), }; -static const struct regulator_linear_range ldo5_ranges[] = { +static const struct linear_range ldo5_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000), REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0), }; -static const struct regulator_linear_range ldo6_ranges[] = { +static const struct linear_range ldo6_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), }; diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c index 5a5e9b5bf4be..9910e949373c 100644 --- a/drivers/regulator/tps65086-regulator.c +++ b/drivers/regulator/tps65086-regulator.c @@ -71,23 +71,23 @@ struct tps65086_regulator { unsigned int decay_mask; }; -static const struct regulator_linear_range tps65086_10mv_ranges[] = { +static const struct linear_range tps65086_10mv_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(410000, 0x1, 0x7F, 10000), }; -static const struct regulator_linear_range tps65086_buck126_25mv_ranges[] = { +static const struct linear_range tps65086_buck126_25mv_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x18, 0), REGULATOR_LINEAR_RANGE(1025000, 0x19, 0x7F, 25000), }; -static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = { +static const struct linear_range tps65086_buck345_25mv_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(425000, 0x1, 0x7F, 25000), }; -static const struct regulator_linear_range tps65086_ldoa1_ranges[] = { +static const struct linear_range tps65086_ldoa1_ranges[] = { REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000), REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xB, 100000), @@ -95,7 +95,7 @@ static const struct regulator_linear_range tps65086_ldoa1_ranges[] = { REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0), }; -static const struct regulator_linear_range tps65086_ldoa23_ranges[] = { +static const struct linear_range tps65086_ldoa23_ranges[] = { REGULATOR_LINEAR_RANGE(700000, 0x0, 0xD, 50000), REGULATOR_LINEAR_RANGE(1400000, 0xE, 0xF, 100000), }; diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c index 67ba78da77ec..d27dbbafcf72 100644 --- a/drivers/regulator/tps65217-regulator.c +++ b/drivers/regulator/tps65217-regulator.c @@ -56,14 +56,14 @@ static const unsigned int LDO1_VSEL_table[] = { 2800000, 3000000, 3100000, 3300000, }; -static const struct regulator_linear_range tps65217_uv1_ranges[] = { +static const struct linear_range tps65217_uv1_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 24, 25000), REGULATOR_LINEAR_RANGE(1550000, 25, 52, 50000), REGULATOR_LINEAR_RANGE(3000000, 53, 55, 100000), REGULATOR_LINEAR_RANGE(3300000, 56, 63, 0), }; -static const struct regulator_linear_range tps65217_uv2_ranges[] = { +static const struct linear_range tps65217_uv2_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 8, 50000), REGULATOR_LINEAR_RANGE(2000000, 9, 13, 100000), REGULATOR_LINEAR_RANGE(2450000, 14, 31, 50000), diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c index b72035610013..05d13f807918 100644 --- a/drivers/regulator/tps65218-regulator.c +++ b/drivers/regulator/tps65218-regulator.c @@ -56,17 +56,17 @@ .bypass_mask = _sm, \ } \ -static const struct regulator_linear_range dcdc1_dcdc2_ranges[] = { +static const struct linear_range dcdc1_dcdc2_ranges[] = { REGULATOR_LINEAR_RANGE(850000, 0x0, 0x32, 10000), REGULATOR_LINEAR_RANGE(1375000, 0x33, 0x3f, 25000), }; -static const struct regulator_linear_range ldo1_dcdc3_ranges[] = { +static const struct linear_range ldo1_dcdc3_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0x0, 0x1a, 25000), REGULATOR_LINEAR_RANGE(1600000, 0x1b, 0x3f, 50000), }; -static const struct regulator_linear_range dcdc4_ranges[] = { +static const struct linear_range dcdc4_ranges[] = { REGULATOR_LINEAR_RANGE(1175000, 0x0, 0xf, 25000), REGULATOR_LINEAR_RANGE(1600000, 0x10, 0x34, 50000), }; diff --git a/drivers/regulator/tps65912-regulator.c b/drivers/regulator/tps65912-regulator.c index 276faeddc370..15c79931ea89 100644 --- a/drivers/regulator/tps65912-regulator.c +++ b/drivers/regulator/tps65912-regulator.c @@ -46,11 +46,11 @@ enum tps65912_regulators { DCDC1, DCDC2, DCDC3, DCDC4, LDO1, LDO2, LDO3, .n_linear_ranges = ARRAY_SIZE(_lr), \ } -static const struct regulator_linear_range tps65912_dcdc_ranges[] = { +static const struct linear_range tps65912_dcdc_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 0x0, 0x3f, 50000), }; -static const struct regulator_linear_range tps65912_ldo_ranges[] = { +static const struct linear_range tps65912_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 25000), REGULATOR_LINEAR_RANGE(1650000, 0x21, 0x3c, 50000), REGULATOR_LINEAR_RANGE(3100000, 0x3d, 0x3f, 100000), diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 866b4dd01da9..4a51cfea45ac 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -360,12 +360,12 @@ static const u16 VINTANA2_VSEL_table[] = { }; /* 600mV to 1450mV in 12.5 mV steps */ -static const struct regulator_linear_range VDD1_ranges[] = { +static const struct linear_range VDD1_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500) }; /* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */ -static const struct regulator_linear_range VDD2_ranges[] = { +static const struct linear_range VDD2_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500), REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500) }; diff --git a/drivers/regulator/twl6030-regulator.c b/drivers/regulator/twl6030-regulator.c index b8100c3cedad..f7db250a7583 100644 --- a/drivers/regulator/twl6030-regulator.c +++ b/drivers/regulator/twl6030-regulator.c @@ -495,7 +495,7 @@ static const struct regulator_ops twlsmps_ops = { }; /*----------------------------------------------------------------------*/ -static const struct regulator_linear_range twl6030ldo_linear_range[] = { +static const struct linear_range twl6030ldo_linear_range[] = { REGULATOR_LINEAR_RANGE(0, 0, 0, 0), REGULATOR_LINEAR_RANGE(1000000, 1, 24, 100000), REGULATOR_LINEAR_RANGE(2750000, 31, 31, 0), diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 018dbbd96771..ad2203d11a88 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -204,7 +204,7 @@ static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data) * BUCKV specifics */ -static const struct regulator_linear_range wm831x_buckv_ranges[] = { +static const struct linear_range wm831x_buckv_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0x7, 0), REGULATOR_LINEAR_RANGE(600000, 0x8, 0x68, 12500), }; diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 56754686c982..7b6cf4810cb7 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -59,7 +59,7 @@ static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data) * General purpose LDOs */ -static const struct regulator_linear_range wm831x_gp_ldo_ranges[] = { +static const struct linear_range wm831x_gp_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000), REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000), }; @@ -312,7 +312,7 @@ static struct platform_driver wm831x_gp_ldo_driver = { * Analogue LDOs */ -static const struct regulator_linear_range wm831x_aldo_ranges[] = { +static const struct linear_range wm831x_aldo_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 12, 50000), REGULATOR_LINEAR_RANGE(1700000, 13, 31, 100000), }; diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 56d6168a888d..ae5f0e7fce8b 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -470,7 +470,7 @@ static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev, return 0; } -static const struct regulator_linear_range wm8350_ldo_ranges[] = { +static const struct linear_range wm8350_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 15, 50000), REGULATOR_LINEAR_RANGE(1800000, 16, 31, 100000), }; diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index 6f331b51e479..4cb1fbb59722 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -13,7 +13,7 @@ #include <linux/regulator/driver.h> #include <linux/mfd/wm8400-private.h> -static const struct regulator_linear_range wm8400_ldo_ranges[] = { +static const struct linear_range wm8400_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000), REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000), }; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 9a911bb5fb61..8419a4321775 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -40,7 +40,7 @@ enum regulator_status { }; /** - * struct regulator_linear_range - specify linear voltage ranges + * struct linear_range - specify linear voltage ranges * * Specify a range of voltages for regulator_map_linear_range() and * regulator_list_linear_range(). @@ -50,14 +50,14 @@ enum regulator_status { * @max_sel: Highest selector for range * @uV_step: Step size */ -struct regulator_linear_range { +struct linear_range { unsigned int min_uV; unsigned int min_sel; unsigned int max_sel; unsigned int uV_step; }; -/* Initialize struct regulator_linear_range */ +/* Initialize struct linear_range */ #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \ { \ .min_uV = _min_uV, \ @@ -348,7 +348,7 @@ struct regulator_desc { unsigned int ramp_delay; int min_dropout_uV; - const struct regulator_linear_range *linear_ranges; + const struct linear_range *linear_ranges; const unsigned int *linear_range_selectors; int n_linear_ranges; -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [RFC PATCH v3 4/8] regulator: rename regulator_linear_range to linear_range @ 2020-02-20 7:36 ` Matti Vaittinen 0 siblings, 0 replies; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:36 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Mark Rutland, Milo Kim, Andrei Stefanescu, Rafael J. Wysocki, Tony Lindgren, Sebastian Reichel, linux-samsung-soc, linux-omap, linux-pm, Krzysztof Kozlowski, Bartosz Golaszewski, Chen-Yu Tsai, Andy Gross, Markus Laine, devicetree, Charles Keepax, Bartlomiej Zolnierkiewicz, linux-arm-msm, Richard Fitzgerald, Mark Brown, linux-mediatek, Matthias Brugger, Bjorn Andersson, linux-arm-kernel, Support Opensource, Sangbeom Kim, Greg Kroah-Hartman, GitAuthor: Matti Vaittinen, Liam Girdwood, linux-kernel, Mikko Mutanen, Rob Herring, patches Rename the "regulator_linear_range" to more generic linear_range as a first step towards converting the "regulator_linear_range" to common helpers. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- drivers/regulator/88pg86x.c | 4 +- drivers/regulator/88pm800-regulator.c | 4 +- drivers/regulator/act8865-regulator.c | 4 +- drivers/regulator/act8945a-regulator.c | 2 +- drivers/regulator/arizona-ldo1.c | 2 +- drivers/regulator/arizona-micsupp.c | 4 +- drivers/regulator/as3711-regulator.c | 6 +-- drivers/regulator/as3722-regulator.c | 4 +- drivers/regulator/axp20x-regulator.c | 16 +++--- drivers/regulator/bcm590xx-regulator.c | 8 +-- drivers/regulator/bd70528-regulator.c | 8 +-- drivers/regulator/bd718x7-regulator.c | 26 ++++----- drivers/regulator/da903x.c | 2 +- drivers/regulator/helpers.c | 8 +-- drivers/regulator/hi6421-regulator.c | 4 +- drivers/regulator/lochnagar-regulator.c | 4 +- drivers/regulator/lp873x-regulator.c | 4 +- drivers/regulator/lp87565-regulator.c | 2 +- drivers/regulator/lp8788-buck.c | 2 +- drivers/regulator/max77650-regulator.c | 2 +- drivers/regulator/mcp16502.c | 4 +- drivers/regulator/mt6323-regulator.c | 6 +-- drivers/regulator/mt6358-regulator.c | 8 +-- drivers/regulator/mt6380-regulator.c | 6 +-- drivers/regulator/mt6397-regulator.c | 6 +-- drivers/regulator/palmas-regulator.c | 4 +- drivers/regulator/qcom-rpmh-regulator.c | 2 +- drivers/regulator/qcom_rpm-regulator.c | 14 ++--- drivers/regulator/qcom_smd-regulator.c | 70 ++++++++++++------------- drivers/regulator/rk808-regulator.c | 10 ++-- drivers/regulator/s2mps11.c | 14 ++--- drivers/regulator/sky81452-regulator.c | 2 +- drivers/regulator/stpmic1_regulator.c | 18 +++---- drivers/regulator/tps65086-regulator.c | 10 ++-- drivers/regulator/tps65217-regulator.c | 4 +- drivers/regulator/tps65218-regulator.c | 6 +-- drivers/regulator/tps65912-regulator.c | 4 +- drivers/regulator/twl-regulator.c | 4 +- drivers/regulator/twl6030-regulator.c | 2 +- drivers/regulator/wm831x-dcdc.c | 2 +- drivers/regulator/wm831x-ldo.c | 4 +- drivers/regulator/wm8350-regulator.c | 2 +- drivers/regulator/wm8400-regulator.c | 2 +- include/linux/regulator/driver.h | 8 +-- 44 files changed, 164 insertions(+), 164 deletions(-) diff --git a/drivers/regulator/88pg86x.c b/drivers/regulator/88pg86x.c index d5ef55c81185..71cfa2c5de5e 100644 --- a/drivers/regulator/88pg86x.c +++ b/drivers/regulator/88pg86x.c @@ -11,13 +11,13 @@ static const struct regulator_ops pg86x_ops = { .list_voltage = regulator_list_voltage_linear_range, }; -static const struct regulator_linear_range pg86x_buck1_ranges[] = { +static const struct linear_range pg86x_buck1_ranges[] = { REGULATOR_LINEAR_RANGE( 0, 0, 10, 0), REGULATOR_LINEAR_RANGE(1000000, 11, 34, 25000), REGULATOR_LINEAR_RANGE(1600000, 35, 47, 50000), }; -static const struct regulator_linear_range pg86x_buck2_ranges[] = { +static const struct linear_range pg86x_buck2_ranges[] = { REGULATOR_LINEAR_RANGE( 0, 0, 15, 0), REGULATOR_LINEAR_RANGE(1000000, 16, 39, 25000), REGULATOR_LINEAR_RANGE(1600000, 40, 52, 50000), diff --git a/drivers/regulator/88pm800-regulator.c b/drivers/regulator/88pm800-regulator.c index 69ae25886181..d08ee81ed1ac 100644 --- a/drivers/regulator/88pm800-regulator.c +++ b/drivers/regulator/88pm800-regulator.c @@ -134,13 +134,13 @@ struct pm800_regulator_info { } /* Ranges are sorted in ascending order. */ -static const struct regulator_linear_range buck1_volt_range[] = { +static const struct linear_range buck1_volt_range[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500), REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x54, 50000), }; /* BUCK 2~5 have same ranges. */ -static const struct regulator_linear_range buck2_5_volt_range[] = { +static const struct linear_range buck2_5_volt_range[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500), REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x72, 50000), }; diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index 0fa97f934df4..19b9742c9ecc 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -220,13 +220,13 @@ static const struct regmap_config act8865_regmap_config = { .val_bits = 8, }; -static const struct regulator_linear_range act8865_voltage_ranges[] = { +static const struct linear_range act8865_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), }; -static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = { +static const struct linear_range act8600_sudcdc_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0), REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000), REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000), diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c index d2f804dbc785..6a62f946ccae 100644 --- a/drivers/regulator/act8945a-regulator.c +++ b/drivers/regulator/act8945a-regulator.c @@ -73,7 +73,7 @@ struct act8945a_pmic { u32 op_mode[ACT8945A_ID_MAX]; }; -static const struct regulator_linear_range act8945a_voltage_ranges[] = { +static const struct linear_range act8945a_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index 1a3d7b720f5e..ade0bef4569d 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -87,7 +87,7 @@ static const struct regulator_ops arizona_ldo1_hc_ops = { .set_bypass = regulator_set_bypass_regmap, }; -static const struct regulator_linear_range arizona_ldo1_hc_ranges[] = { +static const struct linear_range arizona_ldo1_hc_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 0x6, 50000), REGULATOR_LINEAR_RANGE(1800000, 0x7, 0x7, 0), }; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index ae1a5de3e57d..f6cfd3f6f0dd 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -125,7 +125,7 @@ static const struct regulator_ops arizona_micsupp_ops = { .set_bypass = arizona_micsupp_set_bypass, }; -static const struct regulator_linear_range arizona_micsupp_ranges[] = { +static const struct linear_range arizona_micsupp_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 0x1e, 50000), REGULATOR_LINEAR_RANGE(3300000, 0x1f, 0x1f, 0), }; @@ -152,7 +152,7 @@ static const struct regulator_desc arizona_micsupp = { .owner = THIS_MODULE, }; -static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = { +static const struct linear_range arizona_micsupp_ext_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 0x14, 25000), REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000), }; diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c index ece88103f2fd..b6b9206969ae 100644 --- a/drivers/regulator/as3711-regulator.c +++ b/drivers/regulator/as3711-regulator.c @@ -103,18 +103,18 @@ static const struct regulator_ops as3711_dldo_ops = { .map_voltage = regulator_map_voltage_linear_range, }; -static const struct regulator_linear_range as3711_sd_ranges[] = { +static const struct linear_range as3711_sd_ranges[] = { REGULATOR_LINEAR_RANGE(612500, 0x1, 0x40, 12500), REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7f, 50000), }; -static const struct regulator_linear_range as3711_aldo_ranges[] = { +static const struct linear_range as3711_aldo_ranges[] = { REGULATOR_LINEAR_RANGE(1200000, 0, 0xf, 50000), REGULATOR_LINEAR_RANGE(1800000, 0x10, 0x1f, 100000), }; -static const struct regulator_linear_range as3711_dldo_ranges[] = { +static const struct linear_range as3711_dldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 0x10, 50000), REGULATOR_LINEAR_RANGE(1750000, 0x20, 0x3f, 50000), }; diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c index bd5d0bacb08d..33ca197860b3 100644 --- a/drivers/regulator/as3722-regulator.c +++ b/drivers/regulator/as3722-regulator.c @@ -389,7 +389,7 @@ static const struct regulator_ops as3722_ldo6_extcntrl_ops = { .set_bypass = regulator_set_bypass_regmap, }; -static const struct regulator_linear_range as3722_ldo_ranges[] = { +static const struct linear_range as3722_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0), REGULATOR_LINEAR_RANGE(825000, 0x01, 0x24, 25000), REGULATOR_LINEAR_RANGE(1725000, 0x40, 0x7F, 25000), @@ -487,7 +487,7 @@ static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs) return false; } -static const struct regulator_linear_range as3722_sd2345_ranges[] = { +static const struct linear_range as3722_sd2345_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x00, 0x00, 0), REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500), REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 16f0c8570036..7b3dc37130f3 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -512,7 +512,7 @@ static const struct regulator_ops axp20x_ops_sw = { .is_enabled = regulator_is_enabled_regmap, }; -static const struct regulator_linear_range axp20x_ldo4_ranges[] = { +static const struct linear_range axp20x_ldo4_ranges[] = { REGULATOR_LINEAR_RANGE(1250000, AXP20X_LDO4_V_OUT_1250mV_START, AXP20X_LDO4_V_OUT_1250mV_END, @@ -640,7 +640,7 @@ static const struct regulator_desc axp22x_drivevbus_regulator = { }; /* DCDC ranges shared with AXP813 */ -static const struct regulator_linear_range axp803_dcdc234_ranges[] = { +static const struct linear_range axp803_dcdc234_ranges[] = { REGULATOR_LINEAR_RANGE(500000, AXP803_DCDC234_500mV_START, AXP803_DCDC234_500mV_END, @@ -651,7 +651,7 @@ static const struct regulator_linear_range axp803_dcdc234_ranges[] = { 20000), }; -static const struct regulator_linear_range axp803_dcdc5_ranges[] = { +static const struct linear_range axp803_dcdc5_ranges[] = { REGULATOR_LINEAR_RANGE(800000, AXP803_DCDC5_800mV_START, AXP803_DCDC5_800mV_END, @@ -662,7 +662,7 @@ static const struct regulator_linear_range axp803_dcdc5_ranges[] = { 20000), }; -static const struct regulator_linear_range axp803_dcdc6_ranges[] = { +static const struct linear_range axp803_dcdc6_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP803_DCDC6_600mV_START, AXP803_DCDC6_600mV_END, @@ -674,7 +674,7 @@ static const struct regulator_linear_range axp803_dcdc6_ranges[] = { }; /* AXP806's CLDO2 and AXP809's DLDO1 share the same range */ -static const struct regulator_linear_range axp803_dldo2_ranges[] = { +static const struct linear_range axp803_dldo2_ranges[] = { REGULATOR_LINEAR_RANGE(700000, AXP803_DLDO2_700mV_START, AXP803_DLDO2_700mV_END, @@ -760,7 +760,7 @@ static const struct regulator_desc axp803_regulators[] = { AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc-ldo", "ips", 3000), }; -static const struct regulator_linear_range axp806_dcdca_ranges[] = { +static const struct linear_range axp806_dcdca_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP806_DCDCA_600mV_START, AXP806_DCDCA_600mV_END, @@ -771,7 +771,7 @@ static const struct regulator_linear_range axp806_dcdca_ranges[] = { 20000), }; -static const struct regulator_linear_range axp806_dcdcd_ranges[] = { +static const struct linear_range axp806_dcdcd_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP806_DCDCD_600mV_START, AXP806_DCDCD_600mV_END, @@ -836,7 +836,7 @@ static const struct regulator_desc axp806_regulators[] = { AXP806_PWR_OUT_CTRL2, AXP806_PWR_OUT_SW_MASK), }; -static const struct regulator_linear_range axp809_dcdc4_ranges[] = { +static const struct linear_range axp809_dcdc4_ranges[] = { REGULATOR_LINEAR_RANGE(600000, AXP809_DCDC4_600mV_START, AXP809_DCDC4_600mV_END, diff --git a/drivers/regulator/bcm590xx-regulator.c b/drivers/regulator/bcm590xx-regulator.c index 8c98c3f07660..65e23fc5f9c3 100644 --- a/drivers/regulator/bcm590xx-regulator.c +++ b/drivers/regulator/bcm590xx-regulator.c @@ -116,14 +116,14 @@ static const unsigned int ldo_vbus[] = { }; /* DCDC group CSR: supported voltages in microvolts */ -static const struct regulator_linear_range dcdc_csr_ranges[] = { +static const struct linear_range dcdc_csr_ranges[] = { REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), REGULATOR_LINEAR_RANGE(1360000, 51, 55, 20000), REGULATOR_LINEAR_RANGE(900000, 56, 63, 0), }; /* DCDC group IOSR1: supported voltages in microvolts */ -static const struct regulator_linear_range dcdc_iosr1_ranges[] = { +static const struct linear_range dcdc_iosr1_ranges[] = { REGULATOR_LINEAR_RANGE(860000, 2, 51, 10000), REGULATOR_LINEAR_RANGE(1500000, 52, 52, 0), REGULATOR_LINEAR_RANGE(1800000, 53, 53, 0), @@ -131,7 +131,7 @@ static const struct regulator_linear_range dcdc_iosr1_ranges[] = { }; /* DCDC group SDSR1: supported voltages in microvolts */ -static const struct regulator_linear_range dcdc_sdsr1_ranges[] = { +static const struct linear_range dcdc_sdsr1_ranges[] = { REGULATOR_LINEAR_RANGE(860000, 2, 50, 10000), REGULATOR_LINEAR_RANGE(1340000, 51, 51, 0), REGULATOR_LINEAR_RANGE(900000, 52, 63, 0), @@ -143,7 +143,7 @@ struct bcm590xx_info { u8 n_voltages; const unsigned int *volt_table; u8 n_linear_ranges; - const struct regulator_linear_range *linear_ranges; + const struct linear_range *linear_ranges; }; #define BCM590XX_REG_TABLE(_name, _table) \ diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c index 5bf8a2dc5fe7..d44adf7e875a 100644 --- a/drivers/regulator/bd70528-regulator.c +++ b/drivers/regulator/bd70528-regulator.c @@ -20,22 +20,22 @@ #define BUCK_RAMPRATE_125MV 1 #define BUCK_RAMP_MAX 250 -static const struct regulator_linear_range bd70528_buck1_volts[] = { +static const struct linear_range bd70528_buck1_volts[] = { REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000), REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000), }; -static const struct regulator_linear_range bd70528_buck2_volts[] = { +static const struct linear_range bd70528_buck2_volts[] = { REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000), REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000), REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000), }; -static const struct regulator_linear_range bd70528_buck3_volts[] = { +static const struct linear_range bd70528_buck3_volts[] = { REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000), REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0), }; /* All LDOs have same voltage ranges */ -static const struct regulator_linear_range bd70528_ldo_volts[] = { +static const struct linear_range bd70528_ldo_volts[] = { REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000), REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000), REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000), diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c index 13a43eee2e46..d9bef74430d5 100644 --- a/drivers/regulator/bd718x7-regulator.c +++ b/drivers/regulator/bd718x7-regulator.c @@ -152,7 +152,7 @@ static const struct regulator_ops bd718xx_dvs_buck_regulator_ops = { * BD71847 BUCK1/2 * 0.70 to 1.30V (10mV step) */ -static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = { +static const struct linear_range bd718xx_dvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000), REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0), }; @@ -163,7 +163,7 @@ static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = { * and * 0.675 to 1.325 (range 1) */ -static const struct regulator_linear_range bd71837_buck5_volts[] = { +static const struct linear_range bd71837_buck5_volts[] = { /* Ranges when VOLT_SEL bit is 0 */ REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000), @@ -185,7 +185,7 @@ static const unsigned int bd71837_buck5_volt_range_sel[] = { /* * BD71847 BUCK3 */ -static const struct regulator_linear_range bd71847_buck3_volts[] = { +static const struct linear_range bd71847_buck3_volts[] = { /* Ranges when VOLT_SEL bits are 00 */ REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000), @@ -202,7 +202,7 @@ static const unsigned int bd71847_buck3_volt_range_sel[] = { 0x0, 0x0, 0x0, 0x40, 0x80, 0x80, 0x80 }; -static const struct regulator_linear_range bd71847_buck4_volts[] = { +static const struct linear_range bd71847_buck4_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(2600000, 0x00, 0x03, 100000), }; @@ -213,7 +213,7 @@ static const unsigned int bd71847_buck4_volt_range_sel[] = { 0x0, 0x40 }; * BUCK6 * 3.0V to 3.3V (step 100mV) */ -static const struct regulator_linear_range bd71837_buck6_volts[] = { +static const struct linear_range bd71837_buck6_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), }; @@ -237,7 +237,7 @@ static const unsigned int bd718xx_3rd_nodvs_buck_volts[] = { * BUCK8 * 0.8V to 1.40V (step 10mV) */ -static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = { +static const struct linear_range bd718xx_4th_nodvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000), }; @@ -245,7 +245,7 @@ static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = { * LDO1 * 3.0 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo1_volts[] = { +static const struct linear_range bd718xx_ldo1_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000), }; @@ -264,7 +264,7 @@ static const unsigned int ldo_2_volts[] = { * LDO3 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo3_volts[] = { +static const struct linear_range bd718xx_ldo3_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; @@ -272,7 +272,7 @@ static const struct regulator_linear_range bd718xx_ldo3_volts[] = { * LDO4 * 0.9 to 1.8V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo4_volts[] = { +static const struct linear_range bd718xx_ldo4_volts[] = { REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), }; @@ -280,7 +280,7 @@ static const struct regulator_linear_range bd718xx_ldo4_volts[] = { * LDO5 for BD71837 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo5_volts[] = { +static const struct linear_range bd71837_ldo5_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; @@ -288,7 +288,7 @@ static const struct regulator_linear_range bd71837_ldo5_volts[] = { * LDO5 for BD71837 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71847_ldo5_volts[] = { +static const struct linear_range bd71847_ldo5_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), REGULATOR_LINEAR_RANGE(800000, 0x00, 0x0F, 100000), }; @@ -299,7 +299,7 @@ static const unsigned int bd71847_ldo5_volt_range_sel[] = { 0x0, 0x20 }; * LDO6 * 0.9 to 1.8V (100mV step) */ -static const struct regulator_linear_range bd718xx_ldo6_volts[] = { +static const struct linear_range bd718xx_ldo6_volts[] = { REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), }; @@ -307,7 +307,7 @@ static const struct regulator_linear_range bd718xx_ldo6_volts[] = { * LDO7 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo7_volts[] = { +static const struct linear_range bd71837_ldo7_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index 5493c3a86426..770e694824ac 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -248,7 +248,7 @@ static int da9034_set_dvc_voltage_sel(struct regulator_dev *rdev, return ret; } -static const struct regulator_linear_range da9034_ldo12_ranges[] = { +static const struct linear_range da9034_ldo12_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 50000), REGULATOR_LINEAR_RANGE(2700000, 8, 15, 50000), }; diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index ca3dc3f3bb29..2c15df0484e5 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -403,7 +403,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_linear); int regulator_map_voltage_linear_range(struct regulator_dev *rdev, int min_uV, int max_uV) { - const struct regulator_linear_range *range; + const struct linear_range *range; int ret = -EINVAL; int voltage, i; @@ -466,7 +466,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range); int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev, int min_uV, int max_uV) { - const struct regulator_linear_range *range; + const struct linear_range *range; int ret = -EINVAL; int voltage, i; unsigned int selector = 0; @@ -559,7 +559,7 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_linear); int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev, unsigned int selector) { - const struct regulator_linear_range *range; + const struct linear_range *range; int i; unsigned int all_sels = 0; @@ -602,7 +602,7 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range); int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc, unsigned int selector) { - const struct regulator_linear_range *range; + const struct linear_range *range; int i; if (!desc->n_linear_ranges) { diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c index 5ac3d7c29725..66219d8dfc1a 100644 --- a/drivers/regulator/hi6421-regulator.c +++ b/drivers/regulator/hi6421-regulator.c @@ -87,7 +87,7 @@ static const unsigned int ldo_8_voltages[] = { }; /* Ranges are sorted in ascending order. */ -static const struct regulator_linear_range ldo_audio_volt_range[] = { +static const struct linear_range ldo_audio_volt_range[] = { REGULATOR_LINEAR_RANGE(2800000, 0, 3, 50000), REGULATOR_LINEAR_RANGE(3000000, 4, 7, 100000), }; @@ -195,7 +195,7 @@ static const struct regulator_ops hi6421_buck345_ops; * _id - LDO id name string * _match - of match name string * n_volt - number of votages available - * volt_ranges - array of regulator_linear_range + * volt_ranges - array of linear_range * vstep - voltage increase in each linear step in uV * vreg - voltage select register * vmask - voltage select mask diff --git a/drivers/regulator/lochnagar-regulator.c b/drivers/regulator/lochnagar-regulator.c index 9b05e03ba830..5ea3e4141684 100644 --- a/drivers/regulator/lochnagar-regulator.c +++ b/drivers/regulator/lochnagar-regulator.c @@ -36,7 +36,7 @@ static const struct regulator_ops lochnagar_micvdd_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, }; -static const struct regulator_linear_range lochnagar_micvdd_ranges[] = { +static const struct linear_range lochnagar_micvdd_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 0xC, 50000), REGULATOR_LINEAR_RANGE(1700000, 0xD, 0x1F, 100000), }; @@ -97,7 +97,7 @@ static const struct regulator_ops lochnagar_vddcore_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, }; -static const struct regulator_linear_range lochnagar_vddcore_ranges[] = { +static const struct linear_range lochnagar_vddcore_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0x8, 0x41, 12500), }; diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c index b55de293ca7a..fe049b67e7d5 100644 --- a/drivers/regulator/lp873x-regulator.c +++ b/drivers/regulator/lp873x-regulator.c @@ -54,14 +54,14 @@ struct lp873x_regulator { static const struct lp873x_regulator regulators[]; -static const struct regulator_linear_range buck0_buck1_ranges[] = { +static const struct linear_range buck0_buck1_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0), REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000), REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000), REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000), }; -static const struct regulator_linear_range ldo0_ldo1_ranges[] = { +static const struct linear_range ldo0_ldo1_ranges[] = { REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000), }; diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c index 4ae12ac1f4c6..5d525dacf959 100644 --- a/drivers/regulator/lp87565-regulator.c +++ b/drivers/regulator/lp87565-regulator.c @@ -46,7 +46,7 @@ struct lp87565_regulator { static const struct lp87565_regulator regulators[]; -static const struct regulator_linear_range buck0_1_2_3_ranges[] = { +static const struct linear_range buck0_1_2_3_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0xA, 0x17, 10000), REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000), REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000), diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c index 222502a29658..74b7b496b12d 100644 --- a/drivers/regulator/lp8788-buck.c +++ b/drivers/regulator/lp8788-buck.c @@ -92,7 +92,7 @@ struct lp8788_buck { }; /* BUCK 1 ~ 4 voltage ranges */ -static const struct regulator_linear_range buck_volt_ranges[] = { +static const struct linear_range buck_volt_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0, 0), REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000), }; diff --git a/drivers/regulator/max77650-regulator.c b/drivers/regulator/max77650-regulator.c index ac89a412f665..ca08f94a368d 100644 --- a/drivers/regulator/max77650-regulator.c +++ b/drivers/regulator/max77650-regulator.c @@ -49,7 +49,7 @@ static const unsigned int max77651_sbb1_volt_range_sel[] = { 0x0, 0x1, 0x2, 0x3 }; -static const struct regulator_linear_range max77651_sbb1_volt_ranges[] = { +static const struct linear_range max77651_sbb1_volt_ranges[] = { /* range index 0 */ REGULATOR_LINEAR_RANGE(2400000, 0x00, 0x0f, 50000), /* range index 1 */ diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c index e5a02711cb46..6d0ad74935b3 100644 --- a/drivers/regulator/mcp16502.c +++ b/drivers/regulator/mcp16502.c @@ -391,11 +391,11 @@ static const struct of_device_id mcp16502_ids[] = { }; MODULE_DEVICE_TABLE(of, mcp16502_ids); -static const struct regulator_linear_range b1l12_ranges[] = { +static const struct linear_range b1l12_ranges[] = { REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000), }; -static const struct regulator_linear_range b234_ranges[] = { +static const struct linear_range b234_ranges[] = { REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000), }; diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c index 893ea190788a..ff9016170db3 100644 --- a/drivers/regulator/mt6323-regulator.c +++ b/drivers/regulator/mt6323-regulator.c @@ -102,15 +102,15 @@ struct mt6323_regulator_info { .modeset_mask = _modeset_mask, \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), }; diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c index ba42682e06f3..13cb6ac9a892 100644 --- a/drivers/regulator/mt6358-regulator.c +++ b/drivers/regulator/mt6358-regulator.c @@ -137,19 +137,19 @@ struct mt6358_regulator_info { .qi = BIT(15), \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 12500), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), }; -static const struct regulator_linear_range buck_volt_range4[] = { +static const struct linear_range buck_volt_range4[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 0x7f, 12500), }; diff --git a/drivers/regulator/mt6380-regulator.c b/drivers/regulator/mt6380-regulator.c index b6aed090b5e0..9efd8710a6f3 100644 --- a/drivers/regulator/mt6380-regulator.c +++ b/drivers/regulator/mt6380-regulator.c @@ -152,15 +152,15 @@ struct mt6380_regulator_info { .modeset_mask = _modeset_mask, \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0xfe, 6250), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(1200000, 0, 0x3c, 25000), }; diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c index fd9ed864a0c1..269c2a6028e8 100644 --- a/drivers/regulator/mt6397-regulator.c +++ b/drivers/regulator/mt6397-regulator.c @@ -102,15 +102,15 @@ struct mt6397_regulator_info { .qi = BIT(15), \ } -static const struct regulator_linear_range buck_volt_range1[] = { +static const struct linear_range buck_volt_range1[] = { REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range2[] = { +static const struct linear_range buck_volt_range2[] = { REGULATOR_LINEAR_RANGE(800000, 0, 0x7f, 6250), }; -static const struct regulator_linear_range buck_volt_range3[] = { +static const struct linear_range buck_volt_range3[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 0x1f, 20000), }; diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 31325912d311..337dd614695e 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -22,14 +22,14 @@ #include <linux/of_platform.h> #include <linux/regulator/of_regulator.h> -static const struct regulator_linear_range smps_low_ranges[] = { +static const struct linear_range smps_low_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(500000, 0x1, 0x6, 0), REGULATOR_LINEAR_RANGE(510000, 0x7, 0x79, 10000), REGULATOR_LINEAR_RANGE(1650000, 0x7A, 0x7f, 0), }; -static const struct regulator_linear_range smps_high_ranges[] = { +static const struct linear_range smps_high_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x6, 0), REGULATOR_LINEAR_RANGE(1020000, 0x7, 0x79, 20000), diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index c86ad40015ce..953c7fba8d9d 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -86,7 +86,7 @@ enum rpmh_regulator_type { struct rpmh_vreg_hw_data { enum rpmh_regulator_type regulator_type; const struct regulator_ops *ops; - const struct regulator_linear_range voltage_range; + const struct linear_range voltage_range; int n_voltages; int hpm_min_load_uA; const int *pmic_mode_map; diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index 7407cd5a1b74..c15cceeebe45 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -148,41 +148,41 @@ static const struct rpm_reg_parts rpm8960_ncp_parts = { /* * Physically available PMIC regulator voltage ranges */ -static const struct regulator_linear_range pldo_ranges[] = { +static const struct linear_range pldo_ranges[] = { REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500), REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000), REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000), }; -static const struct regulator_linear_range nldo_ranges[] = { +static const struct linear_range nldo_ranges[] = { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), }; -static const struct regulator_linear_range nldo1200_ranges[] = { +static const struct linear_range nldo1200_ranges[] = { REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250), REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500), }; -static const struct regulator_linear_range smps_ranges[] = { +static const struct linear_range smps_ranges[] = { REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), }; -static const struct regulator_linear_range ftsmps_ranges[] = { +static const struct linear_range ftsmps_ranges[] = { REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000), REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500), REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000), }; -static const struct regulator_linear_range smb208_ranges[] = { +static const struct linear_range smb208_ranges[] = { REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000), }; -static const struct regulator_linear_range ncp_ranges[] = { +static const struct linear_range ncp_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000), }; diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index fff8d5fdef6a..34b5c62265a9 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -199,7 +199,7 @@ static const struct regulator_ops rpm_bob_ops = { }; static const struct regulator_desc pma8084_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), }, @@ -209,7 +209,7 @@ static const struct regulator_desc pma8084_hfsmps = { }; static const struct regulator_desc pma8084_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000), }, @@ -219,7 +219,7 @@ static const struct regulator_desc pma8084_ftsmps = { }; static const struct regulator_desc pma8084_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), @@ -230,7 +230,7 @@ static const struct regulator_desc pma8084_pldo = { }; static const struct regulator_desc pma8084_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), }, .n_linear_ranges = 1, @@ -243,7 +243,7 @@ static const struct regulator_desc pma8084_switch = { }; static const struct regulator_desc pm8x41_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1575000, 96, 158, 25000), }, @@ -253,7 +253,7 @@ static const struct regulator_desc pm8x41_hfsmps = { }; static const struct regulator_desc pm8841_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000), }, @@ -263,7 +263,7 @@ static const struct regulator_desc pm8841_ftsmps = { }; static const struct regulator_desc pm8941_boost = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000), }, .n_linear_ranges = 1, @@ -272,7 +272,7 @@ static const struct regulator_desc pm8941_boost = { }; static const struct regulator_desc pm8941_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), @@ -283,7 +283,7 @@ static const struct regulator_desc pm8941_pldo = { }; static const struct regulator_desc pm8941_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), }, .n_linear_ranges = 1, @@ -302,7 +302,7 @@ static const struct regulator_desc pm8941_switch = { }; static const struct regulator_desc pm8916_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500), }, .n_linear_ranges = 1, @@ -311,7 +311,7 @@ static const struct regulator_desc pm8916_pldo = { }; static const struct regulator_desc pm8916_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500), }, .n_linear_ranges = 1, @@ -320,7 +320,7 @@ static const struct regulator_desc pm8916_nldo = { }; static const struct regulator_desc pm8916_buck_lvo_smps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000), }, @@ -330,7 +330,7 @@ static const struct regulator_desc pm8916_buck_lvo_smps = { }; static const struct regulator_desc pm8916_buck_hvo_smps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000), }, .n_linear_ranges = 1, @@ -339,7 +339,7 @@ static const struct regulator_desc pm8916_buck_hvo_smps = { }; static const struct regulator_desc pm8950_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1550000, 96, 127, 25000), }, @@ -349,7 +349,7 @@ static const struct regulator_desc pm8950_hfsmps = { }; static const struct regulator_desc pm8950_ftsmps2p5 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(80000, 0, 255, 5000), REGULATOR_LINEAR_RANGE(160000, 256, 460, 10000), }, @@ -359,7 +359,7 @@ static const struct regulator_desc pm8950_ftsmps2p5 = { }; static const struct regulator_desc pm8950_ult_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(375000, 0, 202, 12500), }, .n_linear_ranges = 1, @@ -368,7 +368,7 @@ static const struct regulator_desc pm8950_ult_nldo = { }; static const struct regulator_desc pm8950_ult_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1750000, 0, 127, 12500), }, .n_linear_ranges = 1, @@ -377,7 +377,7 @@ static const struct regulator_desc pm8950_ult_pldo = { }; static const struct regulator_desc pm8950_pldo_lv = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1500000, 0, 16, 25000), }, .n_linear_ranges = 1, @@ -386,7 +386,7 @@ static const struct regulator_desc pm8950_pldo_lv = { }; static const struct regulator_desc pm8950_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(975000, 0, 164, 12500), }, .n_linear_ranges = 1, @@ -396,7 +396,7 @@ static const struct regulator_desc pm8950_pldo = { static const struct regulator_desc pm8994_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), }, @@ -406,7 +406,7 @@ static const struct regulator_desc pm8994_hfsmps = { }; static const struct regulator_desc pm8994_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 199, 5000), REGULATOR_LINEAR_RANGE(700000, 200, 349, 10000), }, @@ -416,7 +416,7 @@ static const struct regulator_desc pm8994_ftsmps = { }; static const struct regulator_desc pm8994_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), }, .n_linear_ranges = 1, @@ -425,7 +425,7 @@ static const struct regulator_desc pm8994_nldo = { }; static const struct regulator_desc pm8994_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), @@ -446,7 +446,7 @@ static const struct regulator_desc pm8994_lnldo = { }; static const struct regulator_desc pm8998_ftsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000), }, .n_linear_ranges = 1, @@ -455,7 +455,7 @@ static const struct regulator_desc pm8998_ftsmps = { }; static const struct regulator_desc pm8998_hfsmps = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000), }, .n_linear_ranges = 1, @@ -464,7 +464,7 @@ static const struct regulator_desc pm8998_hfsmps = { }; static const struct regulator_desc pm8998_nldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -473,7 +473,7 @@ static const struct regulator_desc pm8998_nldo = { }; static const struct regulator_desc pm8998_pldo = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000), }, .n_linear_ranges = 1, @@ -482,7 +482,7 @@ static const struct regulator_desc pm8998_pldo = { }; static const struct regulator_desc pm8998_pldo_lv = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -495,7 +495,7 @@ static const struct regulator_desc pm8998_switch = { }; static const struct regulator_desc pmi8998_bob = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000), }, .n_linear_ranges = 1, @@ -504,7 +504,7 @@ static const struct regulator_desc pmi8998_bob = { }; static const struct regulator_desc pms405_hfsmps3 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000), }, .n_linear_ranges = 1, @@ -513,7 +513,7 @@ static const struct regulator_desc pms405_hfsmps3 = { }; static const struct regulator_desc pms405_nldo300 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -522,7 +522,7 @@ static const struct regulator_desc pms405_nldo300 = { }; static const struct regulator_desc pms405_nldo1200 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000), }, .n_linear_ranges = 1, @@ -531,7 +531,7 @@ static const struct regulator_desc pms405_nldo1200 = { }; static const struct regulator_desc pms405_pldo50 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000), }, .n_linear_ranges = 1, @@ -540,7 +540,7 @@ static const struct regulator_desc pms405_pldo50 = { }; static const struct regulator_desc pms405_pldo150 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000), }, .n_linear_ranges = 1, @@ -549,7 +549,7 @@ static const struct regulator_desc pms405_pldo150 = { }; static const struct regulator_desc pms405_pldo600 = { - .linear_ranges = (struct regulator_linear_range[]) { + .linear_ranges = (struct linear_range[]) { REGULATOR_LINEAR_RANGE(1256000, 0, 98, 8000), }, .n_linear_ranges = 1, diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 5b4003226484..b7a4cdbfd4c4 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -165,14 +165,14 @@ static const int rk808_buck_config_regs[] = { RK808_BUCK4_CONFIG_REG, }; -static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = { +static const struct linear_range rk808_ldo3_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000), REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0), }; #define RK809_BUCK5_SEL_CNT (8) -static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = { +static const struct linear_range rk809_buck5_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 0, 0), REGULATOR_LINEAR_RANGE(1800000, 1, 3, 200000), REGULATOR_LINEAR_RANGE(2800000, 4, 5, 200000), @@ -201,14 +201,14 @@ static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = { #define RK817_BUCK1_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK1_SEL1 + 1) #define RK817_BUCK3_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK3_SEL1 + 1) -static const struct regulator_linear_range rk817_buck1_voltage_ranges[] = { +static const struct linear_range rk817_buck1_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0, RK817_BUCK1_SEL0, RK817_BUCK1_STP0), REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1, RK817_BUCK1_SEL_CNT, RK817_BUCK1_STP1), }; -static const struct regulator_linear_range rk817_buck3_voltage_ranges[] = { +static const struct linear_range rk817_buck3_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0, RK817_BUCK1_SEL0, RK817_BUCK1_STP0), REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1, @@ -665,7 +665,7 @@ static const struct regulator_ops rk808_switch_ops = { .set_suspend_disable = rk808_set_suspend_disable, }; -static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = { +static const struct linear_range rk805_buck_1_2_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500), REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000), REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0), diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 4f2dc5ebffdc..44511c62edea 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -749,37 +749,37 @@ static const struct regulator_ops s2mps15_reg_buck_ops = { } /* voltage range for s2mps15 LDO 3, 5, 15, 16, 18, 20, 23 and 27 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges1[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges1[] = { REGULATOR_LINEAR_RANGE(1000000, 0xc, 0x38, 25000), }; /* voltage range for s2mps15 LDO 2, 6, 14, 17, 19, 21, 24 and 25 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges2[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges2[] = { REGULATOR_LINEAR_RANGE(1800000, 0x0, 0x3f, 25000), }; /* voltage range for s2mps15 LDO 4, 11, 12, 13, 22 and 26 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges3[] = { REGULATOR_LINEAR_RANGE(700000, 0x0, 0x34, 12500), }; /* voltage range for s2mps15 LDO 7, 8, 9 and 10 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges4[] = { REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000), }; /* voltage range for s2mps15 LDO 1 */ -static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = { +static const struct linear_range s2mps15_ldo_voltage_ranges5[] = { REGULATOR_LINEAR_RANGE(500000, 0x0, 0x20, 12500), }; /* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */ -static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = { +static const struct linear_range s2mps15_buck_voltage_ranges1[] = { REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250), }; /* voltage range for s2mps15 BUCK 8, 9 and 10 */ -static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = { +static const struct linear_range s2mps15_buck_voltage_ranges2[] = { REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500), }; diff --git a/drivers/regulator/sky81452-regulator.c b/drivers/regulator/sky81452-regulator.c index 177dede82a61..37658affe072 100644 --- a/drivers/regulator/sky81452-regulator.c +++ b/drivers/regulator/sky81452-regulator.c @@ -32,7 +32,7 @@ static const struct regulator_ops sky81452_reg_ops = { .is_enabled = regulator_is_enabled_regmap, }; -static const struct regulator_linear_range sky81452_reg_ranges[] = { +static const struct linear_range sky81452_reg_ranges[] = { REGULATOR_LINEAR_RANGE(4500000, 0, 14, 250000), REGULATOR_LINEAR_RANGE(9000000, 15, 31, 1000000), }; diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c index f3d7d007ecbb..adc9973d1b2f 100644 --- a/drivers/regulator/stpmic1_regulator.c +++ b/drivers/regulator/stpmic1_regulator.c @@ -57,13 +57,13 @@ enum { /* Ramp delay worst case is (2250uV/uS) */ #define PMIC_RAMP_DELAY 2200 -static const struct regulator_linear_range buck1_ranges[] = { +static const struct linear_range buck1_ranges[] = { REGULATOR_LINEAR_RANGE(725000, 0, 4, 0), REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000), REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0), }; -static const struct regulator_linear_range buck2_ranges[] = { +static const struct linear_range buck2_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0), REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0), REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0), @@ -77,7 +77,7 @@ static const struct regulator_linear_range buck2_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0), }; -static const struct regulator_linear_range buck3_ranges[] = { +static const struct linear_range buck3_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0), REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0), REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0), @@ -87,7 +87,7 @@ static const struct regulator_linear_range buck3_ranges[] = { REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0), }; -static const struct regulator_linear_range buck4_ranges[] = { +static const struct linear_range buck4_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000), REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0), REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0), @@ -97,19 +97,19 @@ static const struct regulator_linear_range buck4_ranges[] = { REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0), }; -static const struct regulator_linear_range ldo1_ranges[] = { +static const struct linear_range ldo1_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), }; -static const struct regulator_linear_range ldo2_ranges[] = { +static const struct linear_range ldo2_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), }; -static const struct regulator_linear_range ldo3_ranges[] = { +static const struct linear_range ldo3_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0), @@ -117,13 +117,13 @@ static const struct regulator_linear_range ldo3_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 31, 31, 0), }; -static const struct regulator_linear_range ldo5_ranges[] = { +static const struct linear_range ldo5_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0), REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000), REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0), }; -static const struct regulator_linear_range ldo6_ranges[] = { +static const struct linear_range ldo6_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000), REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0), }; diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c index 5a5e9b5bf4be..9910e949373c 100644 --- a/drivers/regulator/tps65086-regulator.c +++ b/drivers/regulator/tps65086-regulator.c @@ -71,23 +71,23 @@ struct tps65086_regulator { unsigned int decay_mask; }; -static const struct regulator_linear_range tps65086_10mv_ranges[] = { +static const struct linear_range tps65086_10mv_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(410000, 0x1, 0x7F, 10000), }; -static const struct regulator_linear_range tps65086_buck126_25mv_ranges[] = { +static const struct linear_range tps65086_buck126_25mv_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x18, 0), REGULATOR_LINEAR_RANGE(1025000, 0x19, 0x7F, 25000), }; -static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = { +static const struct linear_range tps65086_buck345_25mv_ranges[] = { REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(425000, 0x1, 0x7F, 25000), }; -static const struct regulator_linear_range tps65086_ldoa1_ranges[] = { +static const struct linear_range tps65086_ldoa1_ranges[] = { REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0), REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000), REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xB, 100000), @@ -95,7 +95,7 @@ static const struct regulator_linear_range tps65086_ldoa1_ranges[] = { REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0), }; -static const struct regulator_linear_range tps65086_ldoa23_ranges[] = { +static const struct linear_range tps65086_ldoa23_ranges[] = { REGULATOR_LINEAR_RANGE(700000, 0x0, 0xD, 50000), REGULATOR_LINEAR_RANGE(1400000, 0xE, 0xF, 100000), }; diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c index 67ba78da77ec..d27dbbafcf72 100644 --- a/drivers/regulator/tps65217-regulator.c +++ b/drivers/regulator/tps65217-regulator.c @@ -56,14 +56,14 @@ static const unsigned int LDO1_VSEL_table[] = { 2800000, 3000000, 3100000, 3300000, }; -static const struct regulator_linear_range tps65217_uv1_ranges[] = { +static const struct linear_range tps65217_uv1_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 24, 25000), REGULATOR_LINEAR_RANGE(1550000, 25, 52, 50000), REGULATOR_LINEAR_RANGE(3000000, 53, 55, 100000), REGULATOR_LINEAR_RANGE(3300000, 56, 63, 0), }; -static const struct regulator_linear_range tps65217_uv2_ranges[] = { +static const struct linear_range tps65217_uv2_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 8, 50000), REGULATOR_LINEAR_RANGE(2000000, 9, 13, 100000), REGULATOR_LINEAR_RANGE(2450000, 14, 31, 50000), diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c index b72035610013..05d13f807918 100644 --- a/drivers/regulator/tps65218-regulator.c +++ b/drivers/regulator/tps65218-regulator.c @@ -56,17 +56,17 @@ .bypass_mask = _sm, \ } \ -static const struct regulator_linear_range dcdc1_dcdc2_ranges[] = { +static const struct linear_range dcdc1_dcdc2_ranges[] = { REGULATOR_LINEAR_RANGE(850000, 0x0, 0x32, 10000), REGULATOR_LINEAR_RANGE(1375000, 0x33, 0x3f, 25000), }; -static const struct regulator_linear_range ldo1_dcdc3_ranges[] = { +static const struct linear_range ldo1_dcdc3_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0x0, 0x1a, 25000), REGULATOR_LINEAR_RANGE(1600000, 0x1b, 0x3f, 50000), }; -static const struct regulator_linear_range dcdc4_ranges[] = { +static const struct linear_range dcdc4_ranges[] = { REGULATOR_LINEAR_RANGE(1175000, 0x0, 0xf, 25000), REGULATOR_LINEAR_RANGE(1600000, 0x10, 0x34, 50000), }; diff --git a/drivers/regulator/tps65912-regulator.c b/drivers/regulator/tps65912-regulator.c index 276faeddc370..15c79931ea89 100644 --- a/drivers/regulator/tps65912-regulator.c +++ b/drivers/regulator/tps65912-regulator.c @@ -46,11 +46,11 @@ enum tps65912_regulators { DCDC1, DCDC2, DCDC3, DCDC4, LDO1, LDO2, LDO3, .n_linear_ranges = ARRAY_SIZE(_lr), \ } -static const struct regulator_linear_range tps65912_dcdc_ranges[] = { +static const struct linear_range tps65912_dcdc_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 0x0, 0x3f, 50000), }; -static const struct regulator_linear_range tps65912_ldo_ranges[] = { +static const struct linear_range tps65912_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 25000), REGULATOR_LINEAR_RANGE(1650000, 0x21, 0x3c, 50000), REGULATOR_LINEAR_RANGE(3100000, 0x3d, 0x3f, 100000), diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 866b4dd01da9..4a51cfea45ac 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -360,12 +360,12 @@ static const u16 VINTANA2_VSEL_table[] = { }; /* 600mV to 1450mV in 12.5 mV steps */ -static const struct regulator_linear_range VDD1_ranges[] = { +static const struct linear_range VDD1_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500) }; /* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */ -static const struct regulator_linear_range VDD2_ranges[] = { +static const struct linear_range VDD2_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500), REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500) }; diff --git a/drivers/regulator/twl6030-regulator.c b/drivers/regulator/twl6030-regulator.c index b8100c3cedad..f7db250a7583 100644 --- a/drivers/regulator/twl6030-regulator.c +++ b/drivers/regulator/twl6030-regulator.c @@ -495,7 +495,7 @@ static const struct regulator_ops twlsmps_ops = { }; /*----------------------------------------------------------------------*/ -static const struct regulator_linear_range twl6030ldo_linear_range[] = { +static const struct linear_range twl6030ldo_linear_range[] = { REGULATOR_LINEAR_RANGE(0, 0, 0, 0), REGULATOR_LINEAR_RANGE(1000000, 1, 24, 100000), REGULATOR_LINEAR_RANGE(2750000, 31, 31, 0), diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 018dbbd96771..ad2203d11a88 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -204,7 +204,7 @@ static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data) * BUCKV specifics */ -static const struct regulator_linear_range wm831x_buckv_ranges[] = { +static const struct linear_range wm831x_buckv_ranges[] = { REGULATOR_LINEAR_RANGE(600000, 0, 0x7, 0), REGULATOR_LINEAR_RANGE(600000, 0x8, 0x68, 12500), }; diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 56754686c982..7b6cf4810cb7 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -59,7 +59,7 @@ static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data) * General purpose LDOs */ -static const struct regulator_linear_range wm831x_gp_ldo_ranges[] = { +static const struct linear_range wm831x_gp_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000), REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000), }; @@ -312,7 +312,7 @@ static struct platform_driver wm831x_gp_ldo_driver = { * Analogue LDOs */ -static const struct regulator_linear_range wm831x_aldo_ranges[] = { +static const struct linear_range wm831x_aldo_ranges[] = { REGULATOR_LINEAR_RANGE(1000000, 0, 12, 50000), REGULATOR_LINEAR_RANGE(1700000, 13, 31, 100000), }; diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 56d6168a888d..ae5f0e7fce8b 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -470,7 +470,7 @@ static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev, return 0; } -static const struct regulator_linear_range wm8350_ldo_ranges[] = { +static const struct linear_range wm8350_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 15, 50000), REGULATOR_LINEAR_RANGE(1800000, 16, 31, 100000), }; diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index 6f331b51e479..4cb1fbb59722 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -13,7 +13,7 @@ #include <linux/regulator/driver.h> #include <linux/mfd/wm8400-private.h> -static const struct regulator_linear_range wm8400_ldo_ranges[] = { +static const struct linear_range wm8400_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(900000, 0, 14, 50000), REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000), }; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 9a911bb5fb61..8419a4321775 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -40,7 +40,7 @@ enum regulator_status { }; /** - * struct regulator_linear_range - specify linear voltage ranges + * struct linear_range - specify linear voltage ranges * * Specify a range of voltages for regulator_map_linear_range() and * regulator_list_linear_range(). @@ -50,14 +50,14 @@ enum regulator_status { * @max_sel: Highest selector for range * @uV_step: Step size */ -struct regulator_linear_range { +struct linear_range { unsigned int min_uV; unsigned int min_sel; unsigned int max_sel; unsigned int uV_step; }; -/* Initialize struct regulator_linear_range */ +/* Initialize struct linear_range */ #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \ { \ .min_uV = _min_uV, \ @@ -348,7 +348,7 @@ struct regulator_desc { unsigned int ramp_delay; int min_dropout_uV; - const struct regulator_linear_range *linear_ranges; + const struct linear_range *linear_ranges; const unsigned int *linear_range_selectors; int n_linear_ranges; -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 4/8] regulator: rename regulator_linear_range to linear_range 2020-02-20 7:36 ` Matti Vaittinen (?) @ 2020-02-24 11:53 ` Mark Brown -1 siblings, 0 replies; 25+ messages in thread From: Mark Brown @ 2020-02-24 11:53 UTC (permalink / raw) To: Matti Vaittinen Cc: mazziesaccount, Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman, Rafael J. Wysocki, Liam Girdwood, Chen-Yu Tsai, Support Opensource, Charles Keepax, Richard Fitzgerald, Milo Kim, Bartosz Golaszewski, Andrei Stefanescu, Matthias Brugger, Tony Lindgren, Andy Gross, Bjorn Andersson, Sangbeom Kim, Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz, linux-pm, devicetree, linux-kernel, patches, linux-arm-kernel, linux-mediatek, linux-omap, linux-arm-msm, linux-samsung-soc, Markus Laine, Mikko Mutanen [-- Attachment #1: Type: text/plain, Size: 389 bytes --] On Thu, Feb 20, 2020 at 09:36:10AM +0200, Matti Vaittinen wrote: > Rename the "regulator_linear_range" to more generic linear_range > as a first step towards converting the "regulator_linear_range" > to common helpers. Doesn't this introduce a build break when applied by itself? Patches should be bisectable, if you want to split things up you should introduce the new API then use it. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 4/8] regulator: rename regulator_linear_range to linear_range @ 2020-02-24 11:53 ` Mark Brown 0 siblings, 0 replies; 25+ messages in thread From: Mark Brown @ 2020-02-24 11:53 UTC (permalink / raw) To: Matti Vaittinen Cc: Mark Rutland, Milo Kim, Andrei Stefanescu, Rafael J. Wysocki, Tony Lindgren, Liam Girdwood, linux-samsung-soc, linux-omap, mazziesaccount, Krzysztof Kozlowski, Bartosz Golaszewski, Chen-Yu Tsai, Andy Gross, Markus Laine, devicetree, Charles Keepax, linux-pm, linux-arm-msm, Richard Fitzgerald, Rob Herring, linux-mediatek, Matthias Brugger, Bjorn Andersson, linux-arm-kernel, Support Opensource, Sangbeom Kim, Greg Kroah-Hartman, Sebastian Reichel, linux-kernel, Mikko Mutanen, Bartlomiej Zolnierkiewicz, patches [-- Attachment #1.1: Type: text/plain, Size: 389 bytes --] On Thu, Feb 20, 2020 at 09:36:10AM +0200, Matti Vaittinen wrote: > Rename the "regulator_linear_range" to more generic linear_range > as a first step towards converting the "regulator_linear_range" > to common helpers. Doesn't this introduce a build break when applied by itself? Patches should be bisectable, if you want to split things up you should introduce the new API then use it. [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 4/8] regulator: rename regulator_linear_range to linear_range @ 2020-02-24 11:53 ` Mark Brown 0 siblings, 0 replies; 25+ messages in thread From: Mark Brown @ 2020-02-24 11:53 UTC (permalink / raw) To: Matti Vaittinen Cc: Mark Rutland, Milo Kim, Andrei Stefanescu, Rafael J. Wysocki, Tony Lindgren, Liam Girdwood, linux-samsung-soc, linux-omap, mazziesaccount, Krzysztof Kozlowski, Bartosz Golaszewski, Chen-Yu Tsai, Andy Gross, Markus Laine, devicetree, Charles Keepax, linux-pm, linux-arm-msm, Richard Fitzgerald, Rob Herring, linux-mediatek, Matthias Brugger, Bjorn Andersson, linux-arm-kernel, Support Opensource, Sangbeom Kim, Greg Kroah-Hartman, Sebastian Reichel, linux-kernel, Mikko Mutanen, Bartlomiej Zolnierkiewicz, patches [-- Attachment #1.1: Type: text/plain, Size: 389 bytes --] On Thu, Feb 20, 2020 at 09:36:10AM +0200, Matti Vaittinen wrote: > Rename the "regulator_linear_range" to more generic linear_range > as a first step towards converting the "regulator_linear_range" > to common helpers. Doesn't this introduce a build break when applied by itself? Patches should be bisectable, if you want to split things up you should introduce the new API then use it. [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] [-- Attachment #2: Type: text/plain, Size: 170 bytes --] _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 4/8] regulator: rename regulator_linear_range to linear_range 2020-02-24 11:53 ` Mark Brown (?) @ 2020-02-24 12:20 ` Vaittinen, Matti -1 siblings, 0 replies; 25+ messages in thread From: Vaittinen, Matti @ 2020-02-24 12:20 UTC (permalink / raw) To: broonie@kernel.org Cc: robh+dt@kernel.org, sbkim73@samsung.com, linux-pm@vger.kernel.org, wens@csie.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, rf@opensource.cirrus.com, matthias.bgg@gmail.com, lgirdwood@gmail.com, tony@atomide.com, linux-mediatek@lists.infradead.org, rafael@kernel.org, b.zolnierkie@samsung.com, krzk@kernel.org, patches@opensource.cirrus.com, linux-samsung-soc@vger.kernel.org, Mutanen, Mikko, mark.rutland@arm.com, mazziesaccount@gmail.com, milo.kim@ti.com, agross@kernel.org, gregkh@linuxfoundation.org, Laine, Markus, bjorn.andersson@linaro.org, sre@kernel.org, linux-arm-kernel@lists.infradead.org, ckeepax@opensource.cirrus.com, bgolaszewski@baylibre.com, andrei.stefanescu@microchip.com, support.opensource@diasemi.com, linux-omap@vger.kernel.org, linux-arm-msm@vger.kernel.org Hello Mark, On Mon, 2020-02-24 at 11:53 +0000, Mark Brown wrote: > On Thu, Feb 20, 2020 at 09:36:10AM +0200, Matti Vaittinen wrote: > > Rename the "regulator_linear_range" to more generic linear_range > > as a first step towards converting the "regulator_linear_range" > > to common helpers. > > Doesn't this introduce a build break when applied by itself? Patches > should be bisectable, if you want to split things up you should > introduce the new API then use it. Uh, I need to double check but this shouldn't cause build break as only the name of the struct is changed - and I intended to change it both in regulator header and in all of the drivers using it at same time. Or did I do some brainfart here? I just wanted to minimize the changes in patch with the widest audience. Oh, after rebasing to linux 5.6-rc2 I see that there are few new users of regulator_linear_range (I should have known that...) - natuarlly all of the users need to be covered before applying this. Br, Matti Vaittinen ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 4/8] regulator: rename regulator_linear_range to linear_range @ 2020-02-24 12:20 ` Vaittinen, Matti 0 siblings, 0 replies; 25+ messages in thread From: Vaittinen, Matti @ 2020-02-24 12:20 UTC (permalink / raw) To: broonie@kernel.org Cc: mark.rutland@arm.com, milo.kim@ti.com, andrei.stefanescu@microchip.com, rafael@kernel.org, tony@atomide.com, lgirdwood@gmail.com, linux-samsung-soc@vger.kernel.org, mazziesaccount@gmail.com, krzk@kernel.org, bgolaszewski@baylibre.com, wens@csie.org, agross@kernel.org, Laine, Markus, devicetree@vger.kernel.org, ckeepax@opensource.cirrus.com, linux-omap@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org, rf@opensource.cirrus.com, robh+dt@kernel.org, linux-mediatek@lists.infradead.org, sre@kernel.org, matthias.bgg@gmail.com, bjorn.andersson@linaro.org, linux-arm-kernel@lists.infradead.org, support.opensource@diasemi.com, sbkim73@samsung.com, patches@opensource.cirrus.com, linux-kernel@vger.kernel.org, Mutanen, Mikko, b.zolnierkie@samsung.com, gregkh@linuxfoundation.org Hello Mark, On Mon, 2020-02-24 at 11:53 +0000, Mark Brown wrote: > On Thu, Feb 20, 2020 at 09:36:10AM +0200, Matti Vaittinen wrote: > > Rename the "regulator_linear_range" to more generic linear_range > > as a first step towards converting the "regulator_linear_range" > > to common helpers. > > Doesn't this introduce a build break when applied by itself? Patches > should be bisectable, if you want to split things up you should > introduce the new API then use it. Uh, I need to double check but this shouldn't cause build break as only the name of the struct is changed - and I intended to change it both in regulator header and in all of the drivers using it at same time. Or did I do some brainfart here? I just wanted to minimize the changes in patch with the widest audience. Oh, after rebasing to linux 5.6-rc2 I see that there are few new users of regulator_linear_range (I should have known that...) - natuarlly all of the users need to be covered before applying this. Br, Matti Vaittinen _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 4/8] regulator: rename regulator_linear_range to linear_range @ 2020-02-24 12:20 ` Vaittinen, Matti 0 siblings, 0 replies; 25+ messages in thread From: Vaittinen, Matti @ 2020-02-24 12:20 UTC (permalink / raw) To: broonie@kernel.org Cc: mark.rutland@arm.com, milo.kim@ti.com, andrei.stefanescu@microchip.com, rafael@kernel.org, tony@atomide.com, lgirdwood@gmail.com, linux-samsung-soc@vger.kernel.org, mazziesaccount@gmail.com, krzk@kernel.org, bgolaszewski@baylibre.com, wens@csie.org, agross@kernel.org, Laine, Markus, devicetree@vger.kernel.org, ckeepax@opensource.cirrus.com, linux-omap@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org, rf@opensource.cirrus.com, robh+dt@kernel.org, linux-mediatek@lists.infradead.org, sre@kernel.org, matthias.bgg@gmail.com, bjorn.andersson@linaro.org, linux-arm-kernel@lists.infradead.org, support.opensource@diasemi.com, sbkim73@samsung.com, patches@opensource.cirrus.com, linux-kernel@vger.kernel.org, Mutanen, Mikko, b.zolnierkie@samsung.com, gregkh@linuxfoundation.org Hello Mark, On Mon, 2020-02-24 at 11:53 +0000, Mark Brown wrote: > On Thu, Feb 20, 2020 at 09:36:10AM +0200, Matti Vaittinen wrote: > > Rename the "regulator_linear_range" to more generic linear_range > > as a first step towards converting the "regulator_linear_range" > > to common helpers. > > Doesn't this introduce a build break when applied by itself? Patches > should be bisectable, if you want to split things up you should > introduce the new API then use it. Uh, I need to double check but this shouldn't cause build break as only the name of the struct is changed - and I intended to change it both in regulator header and in all of the drivers using it at same time. Or did I do some brainfart here? I just wanted to minimize the changes in patch with the widest audience. Oh, after rebasing to linux 5.6-rc2 I see that there are few new users of regulator_linear_range (I should have known that...) - natuarlly all of the users need to be covered before applying this. Br, Matti Vaittinen _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 25+ messages in thread
* [RFC PATCH v3 5/8] regulator: use linear_ranges helper 2020-02-20 7:33 ` Matti Vaittinen ` (5 preceding siblings ...) (?) @ 2020-02-20 7:36 ` Matti Vaittinen 2020-02-24 11:57 ` Mark Brown -1 siblings, 1 reply; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:36 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman, Rafael J. Wysocki, Liam Girdwood, Mark Brown, GitAuthor: Matti Vaittinen, linux-pm, devicetree, linux-kernel, Markus Laine, Mikko Mutanen Change the regulator helpers to use common linear_ranges code. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- drivers/regulator/Kconfig | 1 + drivers/regulator/helpers.c | 124 ++++++++++++++----------------- include/linux/regulator/driver.h | 25 +------ 3 files changed, 59 insertions(+), 91 deletions(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 74eb5af7295f..6715eee43304 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig REGULATOR bool "Voltage and Current Regulator Support" + select LINEAR_RANGES help Generic Voltage and Current Regulator support. diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index 2c15df0484e5..49f257c37dda 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -129,10 +129,11 @@ int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev) unsigned int r_val; int range; unsigned int val; - int ret, i; - unsigned int voltages_in_range = 0; + int ret; + unsigned int voltages = 0; + const struct linear_range *r = rdev->desc->linear_ranges; - if (!rdev->desc->linear_ranges) + if (!r) return -EINVAL; ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); @@ -150,11 +151,9 @@ int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev) if (range < 0) return -EINVAL; - for (i = 0; i < range; i++) - voltages_in_range += (rdev->desc->linear_ranges[i].max_sel - - rdev->desc->linear_ranges[i].min_sel) + 1; + voltages = linear_range_values_in_range_array(r, range); - return val + voltages_in_range; + return val + voltages; } EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_pickable_regmap); @@ -177,8 +176,11 @@ int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev, unsigned int voltages_in_range = 0; for (i = 0; i < rdev->desc->n_linear_ranges; i++) { - voltages_in_range = (rdev->desc->linear_ranges[i].max_sel - - rdev->desc->linear_ranges[i].min_sel) + 1; + const struct linear_range *r; + + r = &rdev->desc->linear_ranges[i]; + voltages_in_range = linear_range_values_in_range(r); + if (sel < voltages_in_range) break; sel -= voltages_in_range; @@ -405,6 +407,8 @@ int regulator_map_voltage_linear_range(struct regulator_dev *rdev, { const struct linear_range *range; int ret = -EINVAL; + unsigned int sel; + bool found; int voltage, i; if (!rdev->desc->n_linear_ranges) { @@ -413,35 +417,19 @@ int regulator_map_voltage_linear_range(struct regulator_dev *rdev, } for (i = 0; i < rdev->desc->n_linear_ranges; i++) { - int linear_max_uV; - range = &rdev->desc->linear_ranges[i]; - linear_max_uV = range->min_uV + - (range->max_sel - range->min_sel) * range->uV_step; - if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV)) + ret = linear_range_get_selector_high(range, min_uV, &sel, + &found); + if (ret) continue; - - if (min_uV <= range->min_uV) - min_uV = range->min_uV; - - /* range->uV_step == 0 means fixed voltage range */ - if (range->uV_step == 0) { - ret = 0; - } else { - ret = DIV_ROUND_UP(min_uV - range->min_uV, - range->uV_step); - if (ret < 0) - return ret; - } - - ret += range->min_sel; + ret = sel; /* * Map back into a voltage to verify we're still in bounds. * If we are not, then continue checking rest of the ranges. */ - voltage = rdev->desc->ops->list_voltage(rdev, ret); + voltage = rdev->desc->ops->list_voltage(rdev, sel); if (voltage >= min_uV && voltage <= max_uV) break; } @@ -478,30 +466,25 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev, for (i = 0; i < rdev->desc->n_linear_ranges; i++) { int linear_max_uV; + bool found; + unsigned int sel; range = &rdev->desc->linear_ranges[i]; - linear_max_uV = range->min_uV + - (range->max_sel - range->min_sel) * range->uV_step; + linear_max_uV = linear_range_get_max_value(range); - if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV)) { - selector += (range->max_sel - range->min_sel + 1); + if (!(min_uV <= linear_max_uV && max_uV >= range->min)) { + selector += linear_range_values_in_range(range); continue; } - if (min_uV <= range->min_uV) - min_uV = range->min_uV; - - /* range->uV_step == 0 means fixed voltage range */ - if (range->uV_step == 0) { - ret = 0; - } else { - ret = DIV_ROUND_UP(min_uV - range->min_uV, - range->uV_step); - if (ret < 0) - return ret; + ret = linear_range_get_selector_high(range, min_uV, &sel, + &found); + if (ret) { + selector += linear_range_values_in_range(range); + continue; } - ret += selector; + ret = selector + sel; voltage = rdev->desc->ops->list_voltage(rdev, ret); @@ -511,7 +494,7 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev, * exit but retry until we have checked all ranges. */ if (voltage < min_uV || voltage > max_uV) - selector += (range->max_sel - range->min_sel + 1); + selector += linear_range_values_in_range(range); else break; } @@ -569,18 +552,28 @@ int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev, } for (i = 0; i < rdev->desc->n_linear_ranges; i++) { - unsigned int sels_in_range; + unsigned int sel_indexes; range = &rdev->desc->linear_ranges[i]; - sels_in_range = range->max_sel - range->min_sel; + sel_indexes = linear_range_values_in_range(range) - 1; - if (all_sels + sels_in_range >= selector) { + if (all_sels + sel_indexes >= selector) { selector -= all_sels; - return range->min_uV + (range->uV_step * selector); + /* + * As we see here, pickable ranges work only as + * long as the first selector for each pickable + * range is 0, and the each subsequent range for + * this 'pick' follow immediately at next unused + * selector (Eg. there is no gaps between ranges). + * I think this is fine but it probably should be + * documented. OTOH, whole pickable range stuff + * might benefit from some documentation + */ + return range->min + (range->step * selector); } - all_sels += (sels_in_range + 1); + all_sels += (sel_indexes + 1); } return -EINVAL; @@ -602,27 +595,18 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range); int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc, unsigned int selector) { - const struct linear_range *range; - int i; - - if (!desc->n_linear_ranges) { - BUG_ON(!desc->n_linear_ranges); - return -EINVAL; - } - - for (i = 0; i < desc->n_linear_ranges; i++) { - range = &desc->linear_ranges[i]; - - if (!(selector >= range->min_sel && - selector <= range->max_sel)) - continue; + unsigned int val; + int ret; - selector -= range->min_sel; + BUG_ON(!desc->n_linear_ranges); - return range->min_uV + (range->uV_step * selector); - } + ret = linear_range_get_value_array(desc->linear_ranges, + desc->n_linear_ranges, selector, + &val); + if (ret) + return ret; - return -EINVAL; + return val; } EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear_range); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 8419a4321775..7a3982da8868 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -13,6 +13,7 @@ #define __LINUX_REGULATOR_DRIVER_H_ #include <linux/device.h> +#include <linux/linear_range.h> #include <linux/notifier.h> #include <linux/regulator/consumer.h> #include <linux/ww_mutex.h> @@ -39,31 +40,13 @@ enum regulator_status { REGULATOR_STATUS_UNDEFINED, }; -/** - * struct linear_range - specify linear voltage ranges - * - * Specify a range of voltages for regulator_map_linear_range() and - * regulator_list_linear_range(). - * - * @min_uV: Lowest voltage in range - * @min_sel: Lowest selector for range - * @max_sel: Highest selector for range - * @uV_step: Step size - */ -struct linear_range { - unsigned int min_uV; - unsigned int min_sel; - unsigned int max_sel; - unsigned int uV_step; -}; - -/* Initialize struct linear_range */ +/* Initialize struct linear_range for regulators */ #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \ { \ - .min_uV = _min_uV, \ + .min = _min_uV, \ .min_sel = _min_sel, \ .max_sel = _max_sel, \ - .uV_step = _step_uV, \ + .step = _step_uV, \ } /** -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 5/8] regulator: use linear_ranges helper 2020-02-20 7:36 ` [RFC PATCH v3 5/8] regulator: use linear_ranges helper Matti Vaittinen @ 2020-02-24 11:57 ` Mark Brown 2020-02-25 6:23 ` Vaittinen, Matti 0 siblings, 1 reply; 25+ messages in thread From: Mark Brown @ 2020-02-24 11:57 UTC (permalink / raw) To: Matti Vaittinen Cc: mazziesaccount, Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman, Rafael J. Wysocki, Liam Girdwood, linux-pm, devicetree, linux-kernel, Markus Laine, Mikko Mutanen [-- Attachment #1: Type: text/plain, Size: 208 bytes --] On Thu, Feb 20, 2020 at 09:36:38AM +0200, Matti Vaittinen wrote: > Change the regulator helpers to use common linear_ranges code. This needs to be squashed in with the previous commit to avoid build breaks. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 5/8] regulator: use linear_ranges helper 2020-02-24 11:57 ` Mark Brown @ 2020-02-25 6:23 ` Vaittinen, Matti 2020-02-25 15:33 ` Mark Brown 0 siblings, 1 reply; 25+ messages in thread From: Vaittinen, Matti @ 2020-02-25 6:23 UTC (permalink / raw) To: broonie@kernel.org Cc: rafael@kernel.org, mazziesaccount@gmail.com, mark.rutland@arm.com, gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, sre@kernel.org, Laine, Markus, linux-pm@vger.kernel.org, robh+dt@kernel.org, lgirdwood@gmail.com, Mutanen, Mikko Hello Mark, On Mon, 2020-02-24 at 11:57 +0000, Mark Brown wrote: > On Thu, Feb 20, 2020 at 09:36:38AM +0200, Matti Vaittinen wrote: > > Change the regulator helpers to use common linear_ranges code. > > This needs to be squashed in with the previous commit to avoid build > breaks. I don't think so. Only change required on individual regulator drivers should be renaming the struct regulator_linear_range to linear_range. Rest of the changes should be internal to regulator framework, right? Even the naming change of the linear_range struct members should not be visible to these drivers as they use the initializer macro for setting the values. I must admit I didn't compile _all_ the regulator drivers when I tested this though. I will try compiling at least most of the regulator drivers for next version though. And I think the feedback for this series has been mostly positive so I'll also drop the RFC for it. Best Regards Matti Vaittinen ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 5/8] regulator: use linear_ranges helper 2020-02-25 6:23 ` Vaittinen, Matti @ 2020-02-25 15:33 ` Mark Brown 2020-03-03 8:04 ` Vaittinen, Matti 0 siblings, 1 reply; 25+ messages in thread From: Mark Brown @ 2020-02-25 15:33 UTC (permalink / raw) To: Vaittinen, Matti Cc: rafael@kernel.org, mazziesaccount@gmail.com, mark.rutland@arm.com, gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, sre@kernel.org, Laine, Markus, linux-pm@vger.kernel.org, robh+dt@kernel.org, lgirdwood@gmail.com, Mutanen, Mikko [-- Attachment #1: Type: text/plain, Size: 333 bytes --] On Tue, Feb 25, 2020 at 06:23:31AM +0000, Vaittinen, Matti wrote: > Only change required on individual regulator drivers should be renaming > the struct regulator_linear_range to linear_range. Rest of the changes > should be internal to regulator framework, right? Right, it's that type replacement that should be done atomically. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [RFC PATCH v3 5/8] regulator: use linear_ranges helper 2020-02-25 15:33 ` Mark Brown @ 2020-03-03 8:04 ` Vaittinen, Matti 0 siblings, 0 replies; 25+ messages in thread From: Vaittinen, Matti @ 2020-03-03 8:04 UTC (permalink / raw) To: broonie@kernel.org Cc: gregkh@linuxfoundation.org, mazziesaccount@gmail.com, mark.rutland@arm.com, rafael@kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, sre@kernel.org, Laine, Markus, linux-pm@vger.kernel.org, robh+dt@kernel.org, lgirdwood@gmail.com, Mutanen, Mikko Hello Mark, On Tue, 2020-02-25 at 15:33 +0000, Mark Brown wrote: > On Tue, Feb 25, 2020 at 06:23:31AM +0000, Vaittinen, Matti wrote: > > > Only change required on individual regulator drivers should be > > renaming > > the struct regulator_linear_range to linear_range. Rest of the > > changes > > should be internal to regulator framework, right? > > Right, it's that type replacement that should be done atomically. Yes. And the type replacement is done only in this patch where the struct is removed from regulator driver.h header - and the linear_range header providing this new struct is included. Previous patch did not change the type - just renamed the struct. Anyways, I did compile test the patch v4 for these commits and there were no problems in regulator drivers. The BD70528 charger driver had an issue as the linear_range struct was dublicated there - but this should be fixed by the v4 where I added one extra patch doing renaming for this BD70528 charger internal structure. Best Regards Matti Vaittinen ^ permalink raw reply [flat|nested] 25+ messages in thread
* [RFC PATCH v3 6/8] power: supply: bd70528: use linear ranges 2020-02-20 7:33 ` Matti Vaittinen ` (6 preceding siblings ...) (?) @ 2020-02-20 7:37 ` Matti Vaittinen -1 siblings, 0 replies; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:37 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman, Rafael J. Wysocki, Liam Girdwood, Mark Brown, GitAuthor: Matti Vaittinen, linux-pm, devicetree, linux-kernel, Markus Laine, Mikko Mutanen Change the bd70528 to use common linear_range code instead of implementing a copy of it in this driver. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- drivers/power/supply/Kconfig | 1 + drivers/power/supply/bd70528-charger.c | 142 ++++++++++--------------- 2 files changed, 55 insertions(+), 88 deletions(-) diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index 27164a1d3c7c..f77b54c12d30 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -695,6 +695,7 @@ config CHARGER_UCS1002 config CHARGER_BD70528 tristate "ROHM bd70528 charger driver" depends on MFD_ROHM_BD70528 + select LINEAR_RANGES default n help Say Y here to enable support for getting battery status diff --git a/drivers/power/supply/bd70528-charger.c b/drivers/power/supply/bd70528-charger.c index b8e1ec106627..b32fa3cbb0c1 100644 --- a/drivers/power/supply/bd70528-charger.c +++ b/drivers/power/supply/bd70528-charger.c @@ -72,6 +72,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/power_supply.h> +#include <linux/linear_ranges.h> #define CHG_STAT_SUSPEND 0x0 #define CHG_STAT_TRICKLE 0x1 @@ -335,38 +336,37 @@ static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val) return 0; } -struct linear_range { - int min; - int step; - int vals; - int low_sel; -}; - static const struct linear_range current_limit_ranges[] = { { .min = 5, .step = 1, - .vals = 36, - .low_sel = 0, + .min_sel = 0, + .max_sel = 0x22, }, { .min = 40, .step = 5, - .vals = 5, - .low_sel = 0x23, + .min_sel = 0x23, + .max_sel = 0x26, }, { .min = 60, .step = 20, - .vals = 8, - .low_sel = 0x27, + .min_sel = 0x27, + .max_sel = 0x2d, }, { .min = 200, .step = 50, - .vals = 7, - .low_sel = 0x2e, - } + .min_sel = 0x2e, + .max_sel = 0x34, + }, + { + .min = 500, + .step = 0, + .min_sel = 0x35, + .max_sel = 0x3f, + }, }; /* @@ -378,14 +378,14 @@ static const struct linear_range warm_charge_curr[] = { { .min = 10, .step = 10, - .vals = 20, - .low_sel = 0, + .min_sel = 0, + .max_sel = 0x12 }, { .min = 200, .step = 25, - .vals = 13, - .low_sel = 0x13, + .min_sel = 0x13, + .max_sel = 0x1f }, }; @@ -398,56 +398,6 @@ static const struct linear_range warm_charge_curr[] = { #define MAX_WARM_CHG_CURR_SEL 0x1f #define MIN_CHG_CURR_SEL 0x0 -static int find_value_for_selector_low(const struct linear_range *r, - int selectors, unsigned int sel, - unsigned int *val) -{ - int i; - - for (i = 0; i < selectors; i++) { - if (r[i].low_sel <= sel && r[i].low_sel + r[i].vals >= sel) { - *val = r[i].min + (sel - r[i].low_sel) * r[i].step; - return 0; - } - } - return -EINVAL; -} - -/* - * For BD70528 voltage/current limits we happily accept any value which - * belongs the range. We could check if value matching the selector is - * desired by computing the range min + (sel - sel_low) * range step - but - * I guess it is enough if we use voltage/current which is closest (below) - * the requested? - */ -static int find_selector_for_value_low(const struct linear_range *r, - int selectors, unsigned int val, - unsigned int *sel, bool *found) -{ - int i; - int ret = -EINVAL; - - *found = false; - for (i = 0; i < selectors; i++) { - if (r[i].min <= val) { - if (r[i].min + r[i].step * r[i].vals >= val) { - *found = true; - *sel = r[i].low_sel + (val - r[i].min) / - r[i].step; - ret = 0; - break; - } - /* - * If the range max is smaller than requested - * we can set the max supported value from range - */ - *sel = r[i].low_sel + r[i].vals; - ret = 0; - } - } - return ret; -} - static int get_charge_current(struct bd70528_psy *bdpsy, int *ma) { unsigned int sel; @@ -463,9 +413,9 @@ static int get_charge_current(struct bd70528_psy *bdpsy, int *ma) sel &= BD70528_MASK_CHG_CHG_CURR; - ret = find_value_for_selector_low(&warm_charge_curr[0], - ARRAY_SIZE(warm_charge_curr), sel, - ma); + ret = linear_range_get_value_array(&warm_charge_curr[0], + ARRAY_SIZE(warm_charge_curr), + sel, ma); if (ret) { dev_err(bdpsy->dev, "Unknown charge current value 0x%x\n", @@ -491,10 +441,9 @@ static int get_current_limit(struct bd70528_psy *bdpsy, int *ma) sel &= BD70528_MASK_CHG_DCIN_ILIM; - ret = find_value_for_selector_low(¤t_limit_ranges[0], - ARRAY_SIZE(current_limit_ranges), sel, - ma); - + ret = linear_range_get_value_array(¤t_limit_ranges[0], + ARRAY_SIZE(current_limit_ranges), + sel, ma); if (ret) { /* Unspecified values mean 500 mA */ *ma = 500; @@ -588,15 +537,28 @@ static int set_charge_current(struct bd70528_psy *bdpsy, int ma) goto set; } - ret = find_selector_for_value_low(&warm_charge_curr[0], - ARRAY_SIZE(warm_charge_curr), ma, - ®, &found); +/* + * For BD70528 voltage/current limits we happily accept any value which + * belongs the range. We could check if value matching the selector is + * desired by computing the range min + (sel - sel_low) * range step - but + * I guess it is enough if we use voltage/current which is closest (below) + * the requested? + */ + + ret = linear_range_get_selector_low_array(warm_charge_curr, + ARRAY_SIZE(warm_charge_curr), + ma, ®, &found); if (ret) { + dev_err(bdpsy->dev, + "Unsupported charge current %u mA\n", ma); reg = MIN_CHG_CURR_SEL; goto set; } if (!found) { - /* There was a gap in supported values and we hit it */ + /* + * There was a gap in supported values and we hit it. + * Yet a smaller value was found so we use it. + */ dev_warn(bdpsy->dev, "Unsupported charge current %u mA\n", ma); } @@ -629,7 +591,7 @@ static int set_charge_current(struct bd70528_psy *bdpsy, int ma) static int set_current_limit(struct bd70528_psy *bdpsy, int ma) { unsigned int reg; - int ret = 0, tmpret; + int ret = 0, tmpret, i; bool found; if (ma > 500) { @@ -648,17 +610,21 @@ static int set_current_limit(struct bd70528_psy *bdpsy, int ma) goto set; } - ret = find_selector_for_value_low(¤t_limit_ranges[0], - ARRAY_SIZE(current_limit_ranges), ma, - ®, &found); + ret = linear_range_get_selector_low_array(current_limit_ranges, + ARRAY_SIZE(current_limit_ranges), + ma, ®, &found); if (ret) { + dev_err(bdpsy->dev, "Unsupported current limit %umA\n", ma); reg = MIN_CURR_LIMIT_SEL; goto set; } if (!found) { - /* There was a gap in supported values and we hit it ?*/ - dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", - ma); + /* + * There was a gap in supported values and we hit it. + * We found a smaller value from ranges and use it. + * Warn user though. + */ + dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", ma); } set: -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [RFC PATCH v3 7/8] power: supply: add battery parameters 2020-02-20 7:33 ` Matti Vaittinen ` (7 preceding siblings ...) (?) @ 2020-02-20 7:37 ` Matti Vaittinen -1 siblings, 0 replies; 25+ messages in thread From: Matti Vaittinen @ 2020-02-20 7:37 UTC (permalink / raw) To: matti.vaittinen, mazziesaccount Cc: Sebastian Reichel, Rob Herring, Mark Rutland, Greg Kroah-Hartman, Rafael J. Wysocki, Liam Girdwood, Mark Brown, GitAuthor: Matti Vaittinen, linux-pm, devicetree, linux-kernel, Markus Laine, Mikko Mutanen Add parsing of new device-tree battery bindings. - trickle-charge-current-microamp - precharge-upper-limit-microvolt - re-charge-voltage-microvolt - over-voltage-threshold-microvolt Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- drivers/power/supply/power_supply_core.c | 8 ++++++++ include/linux/power_supply.h | 4 ++++ 2 files changed, 12 insertions(+) diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c index 5c36c430ce8b..a8589b6e28f1 100644 --- a/drivers/power/supply/power_supply_core.c +++ b/drivers/power/supply/power_supply_core.c @@ -617,10 +617,18 @@ int power_supply_get_battery_info(struct power_supply *psy, &info->voltage_min_design_uv); of_property_read_u32(battery_np, "voltage-max-design-microvolt", &info->voltage_max_design_uv); + of_property_read_u32(battery_np, "trickle-charge-current-microamp", + &info->tricklecharge_current_ua); of_property_read_u32(battery_np, "precharge-current-microamp", &info->precharge_current_ua); + of_property_read_u32(battery_np, "precharge-upper-limit-microvolt", + &info->precharge_voltage_max_uv); of_property_read_u32(battery_np, "charge-term-current-microamp", &info->charge_term_current_ua); + of_property_read_u32(battery_np, "re-charge-voltage-microvolt", + &info->charge_restart_voltage_uv); + of_property_read_u32(battery_np, "over-voltage-threshold-microvolt", + &info->overvoltage_limit_uv); of_property_read_u32(battery_np, "constant-charge-current-max-microamp", &info->constant_charge_current_max_ua); of_property_read_u32(battery_np, "constant-charge-voltage-max-microvolt", diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 28413f737e7d..44c727f30669 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -341,8 +341,12 @@ struct power_supply_battery_info { int charge_full_design_uah; /* microAmp-hours */ int voltage_min_design_uv; /* microVolts */ int voltage_max_design_uv; /* microVolts */ + int tricklecharge_current_ua; /* microAmps */ int precharge_current_ua; /* microAmps */ + int precharge_voltage_max_uv; /* microVolts */ int charge_term_current_ua; /* microAmps */ + int charge_restart_voltage_uv; /* microVolts */ + int overvoltage_limit_uv; /* microVolts */ int constant_charge_current_max_ua; /* microAmps */ int constant_charge_voltage_max_uv; /* microVolts */ int factory_internal_resistance_uohm; /* microOhms */ -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =] ^ permalink raw reply related [flat|nested] 25+ messages in thread
end of thread, other threads:[~2020-03-03 8:04 UTC | newest] Thread overview: 25+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-02-20 7:33 [RFC PATCH v3 0/8] Support ROHM BD99954 charger IC Matti Vaittinen 2020-02-20 7:33 ` Matti Vaittinen 2020-02-20 7:33 ` Matti Vaittinen 2020-02-20 7:34 ` [RFC PATCH v3 1/8] dt-bindings: battry: add new battery parameters Matti Vaittinen 2020-02-20 7:35 ` [RFC PATCH v3 2/8] dt_bindings: ROHM BD99954 Charger Matti Vaittinen 2020-02-20 20:34 ` Rob Herring 2020-02-20 7:35 ` [RFC PATCH v3 3/8] drivers: base: add linear ranges helpers Matti Vaittinen 2020-02-20 7:47 ` Randy Dunlap 2020-02-20 8:34 ` Vaittinen, Matti 2020-02-20 7:36 ` [RFC PATCH v3 4/8] regulator: rename regulator_linear_range to linear_range Matti Vaittinen 2020-02-20 7:36 ` Matti Vaittinen 2020-02-20 7:36 ` Matti Vaittinen 2020-02-24 11:53 ` Mark Brown 2020-02-24 11:53 ` Mark Brown 2020-02-24 11:53 ` Mark Brown 2020-02-24 12:20 ` Vaittinen, Matti 2020-02-24 12:20 ` Vaittinen, Matti 2020-02-24 12:20 ` Vaittinen, Matti 2020-02-20 7:36 ` [RFC PATCH v3 5/8] regulator: use linear_ranges helper Matti Vaittinen 2020-02-24 11:57 ` Mark Brown 2020-02-25 6:23 ` Vaittinen, Matti 2020-02-25 15:33 ` Mark Brown 2020-03-03 8:04 ` Vaittinen, Matti 2020-02-20 7:37 ` [RFC PATCH v3 6/8] power: supply: bd70528: use linear ranges Matti Vaittinen 2020-02-20 7:37 ` [RFC PATCH v3 7/8] power: supply: add battery parameters Matti Vaittinen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.