All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Kamel Bouhara <kamel.bouhara@bootlin.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	linux-arm-kernel@lists.infradead.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	linux-iio@vger.kernel.org
Subject: Re: [PATCH 3/3] counter: Add atmel TCB capture counter
Date: Wed, 8 Apr 2020 23:56:25 +0200	[thread overview]
Message-ID: <20200408215625.GS3628@piout.net> (raw)
In-Reply-To: <20200408213013.GA30867@icarus>

Hi William,

On 08/04/2020 17:31:03-0400, William Breathitt Gray wrote:
> On Mon, Apr 06, 2020 at 05:53:20PM +0200, Kamel Bouhara wrote:
> > This drivers allows to use the capture mode of the Timer Counter Block
> > hardware block available in Atmel SoCs through the counter subsystem.
> > 
> > Two functions of the counter are supported for the moment: period
> > capture and quadrature decoder. The latter is only supported by the
> > SAMA5 series of SoCs.
> > 
> > For the period capture mode a basic setup has been chosen that will
> > reset the counter each time the period is actually reached. Of course
> > the device offers much more possibilities.
> > 
> > For quadrature mode, both channel 0 and 1 must be configured even if we
> > only capture the position (no revolution/rotation).
> > 
> > Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
> 
> Hi Kamel,
> 
> Thank you for submitting support for this driver. Since this is a new
> counter driver, make sure to create an entry for it in the top-level
> MAINTAINERS file so users know who to contact to report bugs and other
> issues.
> 

The file name already matches for the at91 maintainers so I think we are
good on this front.

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Kamel Bouhara <kamel.bouhara@bootlin.com>,
	devicetree@vger.kernel.org, linux-iio@vger.kernel.org,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	Rob Herring <robh+dt@kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-input@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/3] counter: Add atmel TCB capture counter
Date: Wed, 8 Apr 2020 23:56:25 +0200	[thread overview]
Message-ID: <20200408215625.GS3628@piout.net> (raw)
In-Reply-To: <20200408213013.GA30867@icarus>

Hi William,

On 08/04/2020 17:31:03-0400, William Breathitt Gray wrote:
> On Mon, Apr 06, 2020 at 05:53:20PM +0200, Kamel Bouhara wrote:
> > This drivers allows to use the capture mode of the Timer Counter Block
> > hardware block available in Atmel SoCs through the counter subsystem.
> > 
> > Two functions of the counter are supported for the moment: period
> > capture and quadrature decoder. The latter is only supported by the
> > SAMA5 series of SoCs.
> > 
> > For the period capture mode a basic setup has been chosen that will
> > reset the counter each time the period is actually reached. Of course
> > the device offers much more possibilities.
> > 
> > For quadrature mode, both channel 0 and 1 must be configured even if we
> > only capture the position (no revolution/rotation).
> > 
> > Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
> 
> Hi Kamel,
> 
> Thank you for submitting support for this driver. Since this is a new
> counter driver, make sure to create an entry for it in the top-level
> MAINTAINERS file so users know who to contact to report bugs and other
> issues.
> 

The file name already matches for the at91 maintainers so I think we are
good on this front.

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-04-08 21:56 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-06 15:53 [PATCH 0/3] Atmel TCB capture driver Kamel Bouhara
2020-04-06 15:53 ` Kamel Bouhara
2020-04-06 15:53 ` [PATCH 1/3] ARM: at91: add atmel tcb capabilities Kamel Bouhara
2020-04-06 15:53   ` Kamel Bouhara
2020-04-07 16:53   ` William Breathitt Gray
2020-04-07 16:53     ` William Breathitt Gray
2020-04-07 20:21     ` Kamel Bouhara
2020-04-07 20:21       ` Kamel Bouhara
2020-04-06 15:53 ` [PATCH 2/3] dt-bindings: counter: atmel-tcb-capture counter Kamel Bouhara
2020-04-06 15:53   ` Kamel Bouhara
2020-04-06 15:53 ` [PATCH 3/3] counter: Add atmel TCB capture counter Kamel Bouhara
2020-04-06 15:53   ` Kamel Bouhara
2020-04-08 21:31   ` William Breathitt Gray
2020-04-08 21:31     ` William Breathitt Gray
2020-04-08 21:56     ` Alexandre Belloni [this message]
2020-04-08 21:56       ` Alexandre Belloni
2020-04-09  8:25     ` Kamel Bouhara
2020-04-09  8:25       ` Kamel Bouhara
2020-04-09 13:16       ` William Breathitt Gray
2020-04-09 13:16         ` William Breathitt Gray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200408215625.GS3628@piout.net \
    --to=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kamel.bouhara@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=mark.rutland@arm.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.