Re: [PATCHv3] w1: omap-hdq: Simplify driver with PM runtime autosuspend

[Andreas Kemnade <andreas@kemnade.info>]

On Thu, 16 Apr 2020 11:46:38 -0700
Tony Lindgren <tony@atomide.com> wrote:

> * H. Nikolaus Schaller <hns@goldelico.com> [200416 15:04]:
> > Hi Tony,
> > it looks as if something with this patch is broken on GTA04. For v5.6 and v5.7-rc1.
> > 
> > HDQ battery access times out after ca. 15 seconds and I get temperature of -273.1°C...
> > 
> > Reverting this patch and everything is ok again.  
> 
> Hmm OK interesting.
> 
> > What is "ti,mode" about? Do we have that (indirectly) in gta04.dtsi?
> > Or does this patch need some CONFIGs we do not happen to have?  
> 
> Sounds like you have things working though so there should be no
> need for having ti,mode = "1w" in the dts.
> 
> > > 	pm_runtime_enable(&pdev->dev);
> > > +	pm_runtime_use_autosuspend(&pdev->dev);
> > > +	pm_runtime_set_autosuspend_delay(&pdev->dev, 300);  
> 
> Care to check if changing pm_runtime_set_autosuspend_delay value
> to -1 in probe makes the issue go away? Or change it manually
> to -1 via sysfs.
> 
> If that helps, likely we have a missing pm_runtime_get_sync()
> somewhere in the driver.
> 
I have not tested yet with v5.7-rc1 (it is compiling right now),
but I have not seen any problems with init=/bin/bash on v5.6
and only a minimal set of modules loaded on gta04. I have seen that
42 for IDLEST

So might be something a bit more weird.

Regards,
Andreas