All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>,
	linux-wireless@vger.kernel.org
Subject: [PATCH v5 5/8] ath11k: set psc channel flag when sending channel list to firmware.
Date: Tue,  2 Jun 2020 17:17:21 -0700	[thread overview]
Message-ID: <20200603001724.12161-6-pradeepc@codeaurora.org> (raw)
In-Reply-To: <20200603001724.12161-1-pradeepc@codeaurora.org>

If 6 ghz channel is a Preferred Scanning Channel(PSC), mark
the channel flag accordingly when updating channel list to firmware.
This will be used when making scanning decision in 6GHz channels.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/reg.c | 4 ++++
 drivers/net/wireless/ath/ath11k/wmi.h | 3 ++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index 453aa9c06969..7c9dc91cc48a 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -161,6 +161,10 @@ int ath11k_reg_update_chan_list(struct ath11k *ar)
 			else
 				ch->phy_mode = MODE_11A;
 
+			if (channel->band == NL80211_BAND_6GHZ &&
+			    cfg80211_channel_is_psc(channel))
+				ch->psc_channel = true;
+
 			ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
 				   "mac channel [%d/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
 				   i, params->nallchans,
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index fd82cff7537b..76c2da2c5db7 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2520,7 +2520,8 @@ struct channel_param {
 	    allow_ht:1,
 	    allow_vht:1,
 	    allow_he:1,
-	    set_agile:1;
+	    set_agile:1,
+	    psc_channel:1;
 	u32 phy_mode;
 	u32 cfreq1;
 	u32 cfreq2;
-- 
2.17.1


_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

WARNING: multiple messages have this Message-ID (diff)
From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
	Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Subject: [PATCH v5 5/8] ath11k: set psc channel flag when sending channel list to firmware.
Date: Tue,  2 Jun 2020 17:17:21 -0700	[thread overview]
Message-ID: <20200603001724.12161-6-pradeepc@codeaurora.org> (raw)
In-Reply-To: <20200603001724.12161-1-pradeepc@codeaurora.org>

If 6 ghz channel is a Preferred Scanning Channel(PSC), mark
the channel flag accordingly when updating channel list to firmware.
This will be used when making scanning decision in 6GHz channels.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/reg.c | 4 ++++
 drivers/net/wireless/ath/ath11k/wmi.h | 3 ++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index 453aa9c06969..7c9dc91cc48a 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -161,6 +161,10 @@ int ath11k_reg_update_chan_list(struct ath11k *ar)
 			else
 				ch->phy_mode = MODE_11A;
 
+			if (channel->band == NL80211_BAND_6GHZ &&
+			    cfg80211_channel_is_psc(channel))
+				ch->psc_channel = true;
+
 			ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
 				   "mac channel [%d/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
 				   i, params->nallchans,
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index fd82cff7537b..76c2da2c5db7 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2520,7 +2520,8 @@ struct channel_param {
 	    allow_ht:1,
 	    allow_vht:1,
 	    allow_he:1,
-	    set_agile:1;
+	    set_agile:1,
+	    psc_channel:1;
 	u32 phy_mode;
 	u32 cfreq1;
 	u32 cfreq2;
-- 
2.17.1


  parent reply	other threads:[~2020-06-03  0:17 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-03  0:17 [PATCH v5 0/8] add 6GHz radio support in ath11k driver Pradeep Kumar Chitrapu
2020-06-03  0:17 ` Pradeep Kumar Chitrapu
2020-06-03  0:17 ` [PATCH v5 1/8] ath11k: add 6G frequency list supported by driver Pradeep Kumar Chitrapu
2020-06-03  0:17   ` Pradeep Kumar Chitrapu
2020-06-08 15:41   ` Kalle Valo
2020-06-08 15:41   ` Kalle Valo
2020-06-11  5:06   ` Kalle Valo
2020-06-11  5:06   ` Kalle Valo
2020-06-03  0:17 ` [PATCH v5 2/8] ath11k: add support for 6GHz radio in driver Pradeep Kumar Chitrapu
2020-06-03  0:17   ` Pradeep Kumar Chitrapu
2020-09-15 11:16   ` Wen Gong
2020-09-15 11:16     ` Wen Gong
2020-09-15 12:32     ` Wen Gong
2020-09-15 12:32       ` Wen Gong
2020-09-15 23:07       ` Pradeep Kumar Chitrapu
2020-09-15 23:07         ` Pradeep Kumar Chitrapu
2020-09-16  2:33         ` Wen Gong
2020-09-16  2:33           ` Wen Gong
2020-09-16  3:56   ` Wen Gong
2020-09-16  3:56     ` Wen Gong
2020-06-03  0:17 ` [PATCH v5 3/8] ath11k: Use freq instead of channel number in rx path Pradeep Kumar Chitrapu
2020-06-03  0:17   ` Pradeep Kumar Chitrapu
2020-06-03  0:17 ` [PATCH v5 4/8] ath11k: extend peer_assoc_cmd for 6GHz band Pradeep Kumar Chitrapu
2020-06-03  0:17   ` Pradeep Kumar Chitrapu
2020-06-03  0:17 ` Pradeep Kumar Chitrapu [this message]
2020-06-03  0:17   ` [PATCH v5 5/8] ath11k: set psc channel flag when sending channel list to firmware Pradeep Kumar Chitrapu
2020-06-03  0:17 ` [PATCH v5 6/8] ath11k: Add 6G scan dwell time parameter in scan request command Pradeep Kumar Chitrapu
2020-06-03  0:17   ` Pradeep Kumar Chitrapu
2020-06-03  0:17 ` [PATCH v5 7/8] ath11k: Send multiple scan_chan_list messages if required Pradeep Kumar Chitrapu
2020-06-03  0:17   ` Pradeep Kumar Chitrapu
2020-06-09  6:37   ` Kalle Valo
2020-06-09  6:37     ` Kalle Valo
2020-06-03  0:17 ` [PATCH v5 8/8] ath11k: Add support for 6g scan hint Pradeep Kumar Chitrapu
2020-06-03  0:17   ` Pradeep Kumar Chitrapu
2020-08-24  3:29   ` Wen Gong
2020-08-24  3:29     ` Wen Gong
2020-09-09  8:38     ` Kalle Valo
2020-09-09  8:38     ` Kalle Valo
2020-06-03 13:12 ` [PATCH v5 0/8] add 6GHz radio support in ath11k driver Kalle Valo
2020-06-03 13:12   ` Kalle Valo
2020-06-03 17:50   ` Pradeep Kumar Chitrapu
2020-06-03 17:50     ` Pradeep Kumar Chitrapu
2020-06-08 11:04     ` Kalle Valo
2020-06-08 11:04       ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200603001724.12161-6-pradeepc@codeaurora.org \
    --to=pradeepc@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.