From: Wen Gong <wgong@codeaurora.org>
To: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Cc: linux-wireless-owner@vger.kernel.org,
linux-wireless@vger.kernel.org, ath11k@lists.infradead.org
Subject: Re: [PATCH v5 2/8] ath11k: add support for 6GHz radio in driver
Date: Wed, 16 Sep 2020 10:33:51 +0800 [thread overview]
Message-ID: <ec7637b9d8b5f7c5227dd90a00f50eeb@codeaurora.org> (raw)
In-Reply-To: <0b4f6d618388a97082009ba5380afbf5@codeaurora.org>
On 2020-09-16 07:07, Pradeep Kumar Chitrapu wrote:
>>>>
>>>> - if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP) {
>>>> + if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP &&
>>>> !ar->supports_6ghz) {
>>>> band = &ar->mac.sbands[NL80211_BAND_5GHZ];
>>>> ht_cap = cap->band[NL80211_BAND_5GHZ].ht_cap_info;
>>>> if (ht_cap_info)
>>> After this change, when 6G is support, it removed HT/VHT of 5G band
>>> from "iw list", when connect to an 11AX AP of 5G, it used non-HT.
>>> caused together with this commit
>>> 75e296e9b22aef6fa467523ace87ef623dac1fad(mac80211: simplify and
>>> improve HT/VHT/HE disable code)
>>> + /* disable HT/VHT/HE if we don't support them */
>>> + if (!sband->ht_cap.ht_supported) {
>>> + ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
>>> + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
>>> + ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
>>> + }
>>>
>>> after remove this change in ath11k, it become correct to HE
>>> iw wls1 station dump:
>>> rx bitrate: 149.7 MBit/s HE-MCS 6 HE-NSS 2 HE-GI 0 HE-DCM 0
> Hi Wen,
>
> Do you have
> https://lore.kernel.org/linux-wireless/20200528213443.25687d2695bc.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeid/?
yes, I have it.
>
>>>
>> Hi Pradeep Kumar Chitrapu,
>> For QCA6390, it is single_pdev, the pdev support all 2G/5G/6G,
>> Is it have 3 pdev/ath11k in your chip for 2G/5G/6G?
>> And the pdev/ath11k of 6G have WMI_HOST_WLAN_5G_CAP of
>> cap->supported_bands?
>>> [...]
> Yes, ath11k receives WMI_HOST_WLAN_5G_CAP from firmware for 6G as well.
Ok, so it need to add logic for single_pdev for it(single_pdev is added
in
https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/drivers/net/wireless/ath/ath11k?id=5f859bc02c7bc7a4094bfba0b4ed145edd7661f2,
it is later than your 6G patches), maybe I will add it later.
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
WARNING: multiple messages have this Message-ID (diff)
From: Wen Gong <wgong@codeaurora.org>
To: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
linux-wireless-owner@vger.kernel.org
Subject: Re: [PATCH v5 2/8] ath11k: add support for 6GHz radio in driver
Date: Wed, 16 Sep 2020 10:33:51 +0800 [thread overview]
Message-ID: <ec7637b9d8b5f7c5227dd90a00f50eeb@codeaurora.org> (raw)
In-Reply-To: <0b4f6d618388a97082009ba5380afbf5@codeaurora.org>
On 2020-09-16 07:07, Pradeep Kumar Chitrapu wrote:
>>>>
>>>> - if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP) {
>>>> + if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP &&
>>>> !ar->supports_6ghz) {
>>>> band = &ar->mac.sbands[NL80211_BAND_5GHZ];
>>>> ht_cap = cap->band[NL80211_BAND_5GHZ].ht_cap_info;
>>>> if (ht_cap_info)
>>> After this change, when 6G is support, it removed HT/VHT of 5G band
>>> from "iw list", when connect to an 11AX AP of 5G, it used non-HT.
>>> caused together with this commit
>>> 75e296e9b22aef6fa467523ace87ef623dac1fad(mac80211: simplify and
>>> improve HT/VHT/HE disable code)
>>> + /* disable HT/VHT/HE if we don't support them */
>>> + if (!sband->ht_cap.ht_supported) {
>>> + ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
>>> + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
>>> + ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
>>> + }
>>>
>>> after remove this change in ath11k, it become correct to HE
>>> iw wls1 station dump:
>>> rx bitrate: 149.7 MBit/s HE-MCS 6 HE-NSS 2 HE-GI 0 HE-DCM 0
> Hi Wen,
>
> Do you have
> https://lore.kernel.org/linux-wireless/20200528213443.25687d2695bc.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeid/?
yes, I have it.
>
>>>
>> Hi Pradeep Kumar Chitrapu,
>> For QCA6390, it is single_pdev, the pdev support all 2G/5G/6G,
>> Is it have 3 pdev/ath11k in your chip for 2G/5G/6G?
>> And the pdev/ath11k of 6G have WMI_HOST_WLAN_5G_CAP of
>> cap->supported_bands?
>>> [...]
> Yes, ath11k receives WMI_HOST_WLAN_5G_CAP from firmware for 6G as well.
Ok, so it need to add logic for single_pdev for it(single_pdev is added
in
https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/drivers/net/wireless/ath/ath11k?id=5f859bc02c7bc7a4094bfba0b4ed145edd7661f2,
it is later than your 6G patches), maybe I will add it later.
next prev parent reply other threads:[~2020-09-16 2:34 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-03 0:17 [PATCH v5 0/8] add 6GHz radio support in ath11k driver Pradeep Kumar Chitrapu
2020-06-03 0:17 ` Pradeep Kumar Chitrapu
2020-06-03 0:17 ` [PATCH v5 1/8] ath11k: add 6G frequency list supported by driver Pradeep Kumar Chitrapu
2020-06-03 0:17 ` Pradeep Kumar Chitrapu
2020-06-08 15:41 ` Kalle Valo
2020-06-08 15:41 ` Kalle Valo
2020-06-11 5:06 ` Kalle Valo
2020-06-11 5:06 ` Kalle Valo
2020-06-03 0:17 ` [PATCH v5 2/8] ath11k: add support for 6GHz radio in driver Pradeep Kumar Chitrapu
2020-06-03 0:17 ` Pradeep Kumar Chitrapu
2020-09-15 11:16 ` Wen Gong
2020-09-15 11:16 ` Wen Gong
2020-09-15 12:32 ` Wen Gong
2020-09-15 12:32 ` Wen Gong
2020-09-15 23:07 ` Pradeep Kumar Chitrapu
2020-09-15 23:07 ` Pradeep Kumar Chitrapu
2020-09-16 2:33 ` Wen Gong [this message]
2020-09-16 2:33 ` Wen Gong
2020-09-16 3:56 ` Wen Gong
2020-09-16 3:56 ` Wen Gong
2020-06-03 0:17 ` [PATCH v5 3/8] ath11k: Use freq instead of channel number in rx path Pradeep Kumar Chitrapu
2020-06-03 0:17 ` Pradeep Kumar Chitrapu
2020-06-03 0:17 ` [PATCH v5 4/8] ath11k: extend peer_assoc_cmd for 6GHz band Pradeep Kumar Chitrapu
2020-06-03 0:17 ` Pradeep Kumar Chitrapu
2020-06-03 0:17 ` [PATCH v5 5/8] ath11k: set psc channel flag when sending channel list to firmware Pradeep Kumar Chitrapu
2020-06-03 0:17 ` Pradeep Kumar Chitrapu
2020-06-03 0:17 ` [PATCH v5 6/8] ath11k: Add 6G scan dwell time parameter in scan request command Pradeep Kumar Chitrapu
2020-06-03 0:17 ` Pradeep Kumar Chitrapu
2020-06-03 0:17 ` [PATCH v5 7/8] ath11k: Send multiple scan_chan_list messages if required Pradeep Kumar Chitrapu
2020-06-03 0:17 ` Pradeep Kumar Chitrapu
2020-06-09 6:37 ` Kalle Valo
2020-06-09 6:37 ` Kalle Valo
2020-06-03 0:17 ` [PATCH v5 8/8] ath11k: Add support for 6g scan hint Pradeep Kumar Chitrapu
2020-06-03 0:17 ` Pradeep Kumar Chitrapu
2020-08-24 3:29 ` Wen Gong
2020-08-24 3:29 ` Wen Gong
2020-09-09 8:38 ` Kalle Valo
2020-09-09 8:38 ` Kalle Valo
2020-06-03 13:12 ` [PATCH v5 0/8] add 6GHz radio support in ath11k driver Kalle Valo
2020-06-03 13:12 ` Kalle Valo
2020-06-03 17:50 ` Pradeep Kumar Chitrapu
2020-06-03 17:50 ` Pradeep Kumar Chitrapu
2020-06-08 11:04 ` Kalle Valo
2020-06-08 11:04 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec7637b9d8b5f7c5227dd90a00f50eeb@codeaurora.org \
--to=wgong@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless-owner@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=pradeepc@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.