[PATCH 1/3] arm64: dts: qcom: pm8009: Add base dts file

[PATCH 1/3] arm64: dts: qcom: pm8009: Add base dts file

[Dmitry Baryshkov]

Add base DTS file for pm8009 along with GPIOs and power-on nodes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm8009.dtsi | 37 ++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8009.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi
new file mode 100644
index 000000000000..cb1a10e72474
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@a {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+		};
+
+		pm8009_gpios: gpio@c000 {
+			compatible = "qcom,pm8005-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@b {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
-- 
2.27.0

[PATCH 2/3] arm64: dts: qcom: sm8250-mtp: include pmic files

[Dmitry Baryshkov]

Include files describing used PMIC chips, GPIOs, power on, etc nodes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index cff7a85890ee..aa37eb112d85 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -7,6 +7,10 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SM8250 MTP";
-- 
2.27.0

Re: [PATCH 2/3] arm64: dts: qcom: sm8250-mtp: include pmic files

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 1602 bytes --]

Hi Dmitry,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.8-rc1 next-20200621]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use  as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Dmitry-Baryshkov/arm64-dts-qcom-pm8009-Add-base-dts-file/20200622-032957
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-allyesconfig (attached as .config)
compiler: aarch64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/qcom/pm8150.dtsi:12.1-10 Label or path spmi_bus not found
>> Error: arch/arm64/boot/dts/qcom/pm8150b.dtsi:11.1-10 Label or path spmi_bus not found
>> Error: arch/arm64/boot/dts/qcom/pm8150l.dtsi:11.1-10 Label or path spmi_bus not found
>> Error: arch/arm64/boot/dts/qcom/pm8009.dtsi:9.1-10 Label or path spmi_bus not found
   FATAL ERROR: Syntax error parsing input tree

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 73487 bytes --]

Re: [PATCH 2/3] arm64: dts: qcom: sm8250-mtp: include pmic files

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 1638 bytes --]

Hi Dmitry,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.8-rc1 next-20200621]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use  as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Dmitry-Baryshkov/arm64-dts-qcom-pm8009-Add-base-dts-file/20200622-032957
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-allyesconfig (attached as .config)
compiler: aarch64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/qcom/pm8150.dtsi:12.1-10 Label or path spmi_bus not found
>> Error: arch/arm64/boot/dts/qcom/pm8150b.dtsi:11.1-10 Label or path spmi_bus not found
>> Error: arch/arm64/boot/dts/qcom/pm8150l.dtsi:11.1-10 Label or path spmi_bus not found
>> Error: arch/arm64/boot/dts/qcom/pm8009.dtsi:9.1-10 Label or path spmi_bus not found
   FATAL ERROR: Syntax error parsing input tree

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 73487 bytes --]

Re: [PATCH 2/3] arm64: dts: qcom: sm8250-mtp: include pmic files

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 1838 bytes --]

Hi Dmitry,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.8-rc2 next-20200621]
[cannot apply to agross-msm/qcom/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use  as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Dmitry-Baryshkov/arm64-dts-qcom-pm8009-Add-base-dts-file/20200622-032957
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-randconfig-r031-20200621 (attached as .config)
compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project 1d4c87335d5236ea1f35937e1014980ba961ae34)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install arm64 cross compiling tool for clang build
        # apt-get install binutils-aarch64-linux-gnu
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=arm64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   Error: arch/arm64/boot/dts/qcom/pm8150.dtsi:12.1-10 Label or path spmi_bus not found
   Error: arch/arm64/boot/dts/qcom/pm8150b.dtsi:11.1-10 Label or path spmi_bus not found
   Error: arch/arm64/boot/dts/qcom/pm8150l.dtsi:11.1-10 Label or path spmi_bus not found
   Error: arch/arm64/boot/dts/qcom/pm8009.dtsi:9.1-10 Label or path spmi_bus not found
>> FATAL ERROR: Syntax error parsing input tree

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 41788 bytes --]

Re: [PATCH 2/3] arm64: dts: qcom: sm8250-mtp: include pmic files

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 1877 bytes --]

Hi Dmitry,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.8-rc2 next-20200621]
[cannot apply to agross-msm/qcom/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use  as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Dmitry-Baryshkov/arm64-dts-qcom-pm8009-Add-base-dts-file/20200622-032957
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-randconfig-r031-20200621 (attached as .config)
compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project 1d4c87335d5236ea1f35937e1014980ba961ae34)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install arm64 cross compiling tool for clang build
        # apt-get install binutils-aarch64-linux-gnu
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=arm64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   Error: arch/arm64/boot/dts/qcom/pm8150.dtsi:12.1-10 Label or path spmi_bus not found
   Error: arch/arm64/boot/dts/qcom/pm8150b.dtsi:11.1-10 Label or path spmi_bus not found
   Error: arch/arm64/boot/dts/qcom/pm8150l.dtsi:11.1-10 Label or path spmi_bus not found
   Error: arch/arm64/boot/dts/qcom/pm8009.dtsi:9.1-10 Label or path spmi_bus not found
>> FATAL ERROR: Syntax error parsing input tree

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 41788 bytes --]

[PATCH 3/3] arm64: dts: qcom: pm8150x: add thermal alarms and thermal zones

[Dmitry Baryshkov]

Add temperature alarm and thermal zone configuration to all three
pm8150 instances. Configuration is largely based on the msm-4.19 tree.
These alarms use main adc of the pmic. Separate temperature adc is not
supported yet.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm8150.dtsi  | 42 +++++++++++++++++++++++--
 arch/arm64/boot/dts/qcom/pm8150b.dtsi | 44 +++++++++++++++++++++++++--
 arch/arm64/boot/dts/qcom/pm8150l.dtsi | 44 +++++++++++++++++++++++++--
 3 files changed, 122 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index c0b197458665..1b6406927509 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -9,6 +9,37 @@
 #include <dt-bindings/spmi/spmi.h>
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 
+/ {
+	thermal-zones {
+		pm8150 {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pm8150_0: pmic@0 {
 		compatible = "qcom,pm8150", "qcom,spmi-pmic";
@@ -30,6 +61,15 @@ pwrkey {
 			};
 		};
 
+		pm8150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
 		pm8150_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
@@ -38,8 +78,6 @@ pm8150_adc: adc@3100 {
 			#io-channel-cells = <1>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 40b5d75a4a1d..e112e8876db6 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -8,6 +8,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm8150b {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150b_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmic@2 {
 		compatible = "qcom,pm8150b", "qcom,spmi-pmic";
@@ -22,7 +53,16 @@ power-on@800 {
 			status = "disabled";
 		};
 
-		adc@3100 {
+		pm8150b_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150b_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150b_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
 			#address-cells = <1>;
@@ -30,8 +70,6 @@ adc@3100 {
 			#io-channel-cells = <1>;
 			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index cf05e0685d10..62139538b7d9 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -8,6 +8,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm8150l {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmic@4 {
 		compatible = "qcom,pm8150l", "qcom,spmi-pmic";
@@ -22,7 +53,16 @@ power-on@800 {
 			status = "disabled";
 		};
 
-		adc@3100 {
+		pm8150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150l_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150l_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
 			#address-cells = <1>;
@@ -30,8 +70,6 @@ adc@3100 {
 			#io-channel-cells = <1>;
 			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
-- 
2.27.0

Re: [PATCH 1/3] arm64: dts: qcom: pm8009: Add base dts file

[Bjorn Andersson]

On Sun 21 Jun 12:28 PDT 2020, Dmitry Baryshkov wrote:

> Add base DTS file for pm8009 along with GPIOs and power-on nodes.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

I took the liberty of adding a pm8009_pon label to the pon node, then
applied the three patches.

Thanks,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/pm8009.dtsi | 37 ++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/pm8009.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi
> new file mode 100644
> index 000000000000..cb1a10e72474
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi
> @@ -0,0 +1,37 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020, Linaro Limited
> + */
> +
> +#include <dt-bindings/spmi/spmi.h>
> +
> +&spmi_bus {
> +	pmic@a {
> +		compatible = "qcom,pm8009", "qcom,spmi-pmic";
> +		reg = <0xa SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pon@800 {
> +			compatible = "qcom,pm8916-pon";
> +			reg = <0x0800>;
> +		};
> +
> +		pm8009_gpios: gpio@c000 {
> +			compatible = "qcom,pm8005-gpio";
> +			reg = <0xc000>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +
> +	pmic@b {
> +		compatible = "qcom,pm8009", "qcom,spmi-pmic";
> +		reg = <0xb SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +};
> -- 
> 2.27.0
>