* [PATCH v3 1/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen
@ 2020-07-03 18:44 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2020-07-03 18:44 UTC (permalink / raw)
To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Alim Akhtar, Chanwoo Choi, Pankaj Dubey
Remove the regulators node and define fixed regulators directly under
the root node. This makes Exynos4412 Origen board consistent with other
Exynos boards.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
---
arch/arm/boot/dts/exynos4412-origen.dts | 21 +++++++--------------
1 file changed, 7 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index dc865be40751..8b11ad391252 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -33,20 +33,13 @@
reg = <0x0203F000 0x1000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mmc_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ mmc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
display-timings {
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 1/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen
@ 2020-07-03 18:44 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2020-07-03 18:44 UTC (permalink / raw)
To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Bartlomiej Zolnierkiewicz, Sylwester Nawrocki, Pankaj Dubey,
Chanwoo Choi, Alim Akhtar, Marek Szyprowski
Remove the regulators node and define fixed regulators directly under
the root node. This makes Exynos4412 Origen board consistent with other
Exynos boards.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
---
arch/arm/boot/dts/exynos4412-origen.dts | 21 +++++++--------------
1 file changed, 7 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index dc865be40751..8b11ad391252 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -33,20 +33,13 @@
reg = <0x0203F000 0x1000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mmc_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ mmc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
display-timings {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 2/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale
2020-07-03 18:44 ` Krzysztof Kozlowski
@ 2020-07-03 18:44 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2020-07-03 18:44 UTC (permalink / raw)
To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Alim Akhtar, Chanwoo Choi, Pankaj Dubey
Remove the regulators node and define fixed regulators directly under
the root node. This makes Exynos5250 Arndale board consistent with
other Exynos boards.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
---
arch/arm/boot/dts/exynos5250-arndale.dts | 86 ++++++++++--------------
1 file changed, 37 insertions(+), 49 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index c4cc7611898c..59872d83da6e 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -84,60 +84,48 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- main_dc_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "MAIN_DC";
- regulator-always-on;
- };
+ main_dc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "MAIN_DC";
+ regulator-always-on;
+ };
- mmc_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "VDD_MMC";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
+ mmc_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_MMC";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
- reg_hdmi_en: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "hdmi-en";
- regulator-always-on;
- };
+ reg_hdmi_en: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi-en";
+ regulator-always-on;
+ };
- vcc_1v2_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "VCC_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
+ vcc_1v2_reg: regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
- vcc_1v8_reg: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ vcc_1v8_reg: regulator-4 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- vcc_3v3_reg: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ vcc_3v3_reg: regulator-5 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 2/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale
@ 2020-07-03 18:44 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2020-07-03 18:44 UTC (permalink / raw)
To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Bartlomiej Zolnierkiewicz, Sylwester Nawrocki, Pankaj Dubey,
Chanwoo Choi, Alim Akhtar, Marek Szyprowski
Remove the regulators node and define fixed regulators directly under
the root node. This makes Exynos5250 Arndale board consistent with
other Exynos boards.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
---
arch/arm/boot/dts/exynos5250-arndale.dts | 86 ++++++++++--------------
1 file changed, 37 insertions(+), 49 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index c4cc7611898c..59872d83da6e 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -84,60 +84,48 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- main_dc_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "MAIN_DC";
- regulator-always-on;
- };
+ main_dc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "MAIN_DC";
+ regulator-always-on;
+ };
- mmc_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "VDD_MMC";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
+ mmc_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_MMC";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
- reg_hdmi_en: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "hdmi-en";
- regulator-always-on;
- };
+ reg_hdmi_en: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi-en";
+ regulator-always-on;
+ };
- vcc_1v2_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "VCC_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
+ vcc_1v2_reg: regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
- vcc_1v8_reg: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ vcc_1v8_reg: regulator-4 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- vcc_3v3_reg: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ vcc_3v3_reg: regulator-5 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 3/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420
2020-07-03 18:44 ` Krzysztof Kozlowski
@ 2020-07-03 18:44 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2020-07-03 18:44 UTC (permalink / raw)
To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Alim Akhtar, Chanwoo Choi, Pankaj Dubey
Remove the regulators node and define fixed regulators directly under
the root node. This makes SMDK5420 board consistent with other Exynos
boards.
Name the fixed regulator nodes consistently.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 53 ++++++++++-------------
1 file changed, 22 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index e3f2afe8359a..83fa800fa1eb 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -32,40 +32,31 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd: fixed-regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd-supply";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ vdd: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- dbvdd: fixed-regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "dbvdd-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ dbvdd: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "dbvdd-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- spkvdd: fixed-regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "spkvdd-supply";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ spkvdd: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "spkvdd-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
};
- usb300_vbus_reg: regulator-usb300 {
+ usb300_vbus_reg: regulator-3 {
compatible = "regulator-fixed";
regulator-name = "VBUS0";
regulator-min-microvolt = <5000000>;
@@ -76,7 +67,7 @@
enable-active-high;
};
- usb301_vbus_reg: regulator-usb301 {
+ usb301_vbus_reg: regulator-4 {
compatible = "regulator-fixed";
regulator-name = "VBUS1";
regulator-min-microvolt = <5000000>;
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 3/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420
@ 2020-07-03 18:44 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2020-07-03 18:44 UTC (permalink / raw)
To: Rob Herring, Kukjin Kim, Krzysztof Kozlowski, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Bartlomiej Zolnierkiewicz, Sylwester Nawrocki, Pankaj Dubey,
Chanwoo Choi, Alim Akhtar, Marek Szyprowski
Remove the regulators node and define fixed regulators directly under
the root node. This makes SMDK5420 board consistent with other Exynos
boards.
Name the fixed regulator nodes consistently.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v2:
1. Remove also "reg" property
Changes since v1:
1. New patch
---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 53 ++++++++++-------------
1 file changed, 22 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index e3f2afe8359a..83fa800fa1eb 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -32,40 +32,31 @@
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd: fixed-regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd-supply";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ vdd: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- dbvdd: fixed-regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "dbvdd-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ dbvdd: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "dbvdd-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- spkvdd: fixed-regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "spkvdd-supply";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ spkvdd: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "spkvdd-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
};
- usb300_vbus_reg: regulator-usb300 {
+ usb300_vbus_reg: regulator-3 {
compatible = "regulator-fixed";
regulator-name = "VBUS0";
regulator-min-microvolt = <5000000>;
@@ -76,7 +67,7 @@
enable-active-high;
};
- usb301_vbus_reg: regulator-usb301 {
+ usb301_vbus_reg: regulator-4 {
compatible = "regulator-fixed";
regulator-name = "VBUS1";
regulator-min-microvolt = <5000000>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-07-03 18:46 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-07-03 18:44 [PATCH v3 1/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen Krzysztof Kozlowski
2020-07-03 18:44 ` Krzysztof Kozlowski
2020-07-03 18:44 ` [PATCH v3 2/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale Krzysztof Kozlowski
2020-07-03 18:44 ` Krzysztof Kozlowski
2020-07-03 18:44 ` [PATCH v3 3/3] ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420 Krzysztof Kozlowski
2020-07-03 18:44 ` Krzysztof Kozlowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.