All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Lukasz Stelmach <l.stelmach@samsung.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Kukjin Kim <kgene@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	m.szyprowski@samsung.com, b.zolnierkie@samsung.com
Subject: Re: [PATCH 3/3] ARM: defconfig: Enable ax88796c driver
Date: Wed, 26 Aug 2020 08:46:45 +0200	[thread overview]
Message-ID: <20200826064645.GA12103@pi3> (raw)
In-Reply-To: <dleftjk0xmuh3d.fsf%l.stelmach@samsung.com>

On Wed, Aug 26, 2020 at 07:11:18AM +0200, Lukasz Stelmach wrote:
> It was <2020-08-25 wto 20:51>, when Krzysztof Kozlowski wrote:
> > On Tue, Aug 25, 2020 at 07:03:11PM +0200, Łukasz Stelmach wrote:
> >> Enable ax88796c driver for the ethernet chip on Exynos3250-based
> >> ARTIK5 boards.
> >> 
> >> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
> >> ---
> >>  arch/arm/configs/exynos_defconfig   | 2 ++
> >>  arch/arm/configs/multi_v7_defconfig | 2 ++
> >>  2 files changed, 4 insertions(+)
> >> 
> >> Please DO NOT merge before these two
> >
> > Sure, it can wait but shouldn't actually DT wait? It's only defconfig so
> > it does not change anything except automated systems booting these
> > defconfigs... The boards might be broken by DT.
> 
> I was told, to ask for deferred merge of defconfig and it makes sense to
> me. DT won't break anything if the driver isn't compiled. However, I can
> see that you have a word you may decide about DT too. My point is to
> wait until spi-s3c64xx patches are merged and not to break ARTIK5
> boards.

The config is chosen and adjusted by each person, during build. Merging
defconfig does not necessarily affect them. However merging DT affects -
you cannot disable it without source code modification.

Anyway, no problem for me with waiting with defconfig.

Best regards,
Krzysztof


> 
> >> 
> >>   https://lore.kernel.org/lkml/20200821161401.11307-2-l.stelmach@samsung.com/
> >>   https://lore.kernel.org/lkml/20200821161401.11307-3-l.stelmach@samsung.com/
> >> 
> >> diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
> >> index 6e8b5ff0859c..82480b2bf545 100644
> >> --- a/arch/arm/configs/exynos_defconfig
> >> +++ b/arch/arm/configs/exynos_defconfig
> >> @@ -107,6 +107,8 @@ CONFIG_MD=y
> >>  CONFIG_BLK_DEV_DM=y
> >>  CONFIG_DM_CRYPT=m
> >>  CONFIG_NETDEVICES=y
> >> +CONFIG_NET_VENDOR_ASIX=y
> >> +CONFIG_SPI_AX88796C=y
> >>  CONFIG_SMSC911X=y
> >>  CONFIG_USB_RTL8150=m
> >>  CONFIG_USB_RTL8152=y
> >> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> >> index e9e76e32f10f..a8b4e95d4148 100644
> >> --- a/arch/arm/configs/multi_v7_defconfig
> >> +++ b/arch/arm/configs/multi_v7_defconfig
> >> @@ -241,6 +241,8 @@ CONFIG_SATA_HIGHBANK=y
> >>  CONFIG_SATA_MV=y
> >>  CONFIG_SATA_RCAR=y
> >>  CONFIG_NETDEVICES=y
> >> +CONFIG_NET_VENDOR_ASIX=y
> >> +CONFIG_SPI_AX88796C=m
> >>  CONFIG_VIRTIO_NET=y
> >>  CONFIG_B53_SPI_DRIVER=m
> >>  CONFIG_B53_MDIO_DRIVER=m
> >> -- 
> >> 2.26.2
> >> 
> >
> >
> 
> -- 
> Łukasz Stelmach
> Samsung R&D Institute Poland
> Samsung Electronics



WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Lukasz Stelmach <l.stelmach@samsung.com>
Cc: devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	b.zolnierkie@samsung.com, netdev@vger.kernel.org,
	Russell King <linux@armlinux.org.uk>,
	Rob Herring <robh+dt@kernel.org>,
	linux-kernel@vger.kernel.org, Kukjin Kim <kgene@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	linux-arm-kernel@lists.infradead.org, m.szyprowski@samsung.com
Subject: Re: [PATCH 3/3] ARM: defconfig: Enable ax88796c driver
Date: Wed, 26 Aug 2020 08:46:45 +0200	[thread overview]
Message-ID: <20200826064645.GA12103@pi3> (raw)
In-Reply-To: <dleftjk0xmuh3d.fsf%l.stelmach@samsung.com>

On Wed, Aug 26, 2020 at 07:11:18AM +0200, Lukasz Stelmach wrote:
> It was <2020-08-25 wto 20:51>, when Krzysztof Kozlowski wrote:
> > On Tue, Aug 25, 2020 at 07:03:11PM +0200, Łukasz Stelmach wrote:
> >> Enable ax88796c driver for the ethernet chip on Exynos3250-based
> >> ARTIK5 boards.
> >> 
> >> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
> >> ---
> >>  arch/arm/configs/exynos_defconfig   | 2 ++
> >>  arch/arm/configs/multi_v7_defconfig | 2 ++
> >>  2 files changed, 4 insertions(+)
> >> 
> >> Please DO NOT merge before these two
> >
> > Sure, it can wait but shouldn't actually DT wait? It's only defconfig so
> > it does not change anything except automated systems booting these
> > defconfigs... The boards might be broken by DT.
> 
> I was told, to ask for deferred merge of defconfig and it makes sense to
> me. DT won't break anything if the driver isn't compiled. However, I can
> see that you have a word you may decide about DT too. My point is to
> wait until spi-s3c64xx patches are merged and not to break ARTIK5
> boards.

The config is chosen and adjusted by each person, during build. Merging
defconfig does not necessarily affect them. However merging DT affects -
you cannot disable it without source code modification.

Anyway, no problem for me with waiting with defconfig.

Best regards,
Krzysztof


> 
> >> 
> >>   https://lore.kernel.org/lkml/20200821161401.11307-2-l.stelmach@samsung.com/
> >>   https://lore.kernel.org/lkml/20200821161401.11307-3-l.stelmach@samsung.com/
> >> 
> >> diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
> >> index 6e8b5ff0859c..82480b2bf545 100644
> >> --- a/arch/arm/configs/exynos_defconfig
> >> +++ b/arch/arm/configs/exynos_defconfig
> >> @@ -107,6 +107,8 @@ CONFIG_MD=y
> >>  CONFIG_BLK_DEV_DM=y
> >>  CONFIG_DM_CRYPT=m
> >>  CONFIG_NETDEVICES=y
> >> +CONFIG_NET_VENDOR_ASIX=y
> >> +CONFIG_SPI_AX88796C=y
> >>  CONFIG_SMSC911X=y
> >>  CONFIG_USB_RTL8150=m
> >>  CONFIG_USB_RTL8152=y
> >> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> >> index e9e76e32f10f..a8b4e95d4148 100644
> >> --- a/arch/arm/configs/multi_v7_defconfig
> >> +++ b/arch/arm/configs/multi_v7_defconfig
> >> @@ -241,6 +241,8 @@ CONFIG_SATA_HIGHBANK=y
> >>  CONFIG_SATA_MV=y
> >>  CONFIG_SATA_RCAR=y
> >>  CONFIG_NETDEVICES=y
> >> +CONFIG_NET_VENDOR_ASIX=y
> >> +CONFIG_SPI_AX88796C=m
> >>  CONFIG_VIRTIO_NET=y
> >>  CONFIG_B53_SPI_DRIVER=m
> >>  CONFIG_B53_MDIO_DRIVER=m
> >> -- 
> >> 2.26.2
> >> 
> >
> >
> 
> -- 
> Łukasz Stelmach
> Samsung R&D Institute Poland
> Samsung Electronics



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-08-26  6:46 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20200825170322eucas1p2c6619aa3e02d2762e07da99640a2451c@eucas1p2.samsung.com>
2020-08-25 17:03 ` [PATCH 1/3] net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver Łukasz Stelmach
2020-08-25 17:03   ` Łukasz Stelmach
2020-08-25 17:03   ` [PATCH 2/3] ARM: dts: Add ethernet Łukasz Stelmach
2020-08-25 17:03     ` Łukasz Stelmach
2020-08-25 18:03     ` Andrew Lunn
2020-08-25 18:03       ` Andrew Lunn
2020-08-25 18:49     ` Krzysztof Kozlowski
2020-08-25 18:49       ` Krzysztof Kozlowski
2020-08-25 17:03   ` [PATCH 3/3] ARM: defconfig: Enable ax88796c driver Łukasz Stelmach
2020-08-25 17:03     ` Łukasz Stelmach
2020-08-25 18:51     ` Krzysztof Kozlowski
2020-08-25 18:51       ` Krzysztof Kozlowski
2020-08-26  5:11       ` Lukasz Stelmach
2020-08-26  5:11         ` Lukasz Stelmach
2020-08-26  6:46         ` Krzysztof Kozlowski [this message]
2020-08-26  6:46           ` Krzysztof Kozlowski
2020-08-25 17:19   ` [PATCH 1/3] net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver Randy Dunlap
2020-08-25 17:19     ` Randy Dunlap
2020-08-25 17:30     ` Lukasz Stelmach
2020-08-25 17:30       ` Lukasz Stelmach
2020-08-25 17:55       ` Randy Dunlap
2020-08-25 17:55         ` Randy Dunlap
2020-08-25 18:01   ` Andrew Lunn
2020-08-25 18:01     ` Andrew Lunn
2020-08-26  7:13     ` Geert Uytterhoeven
2020-08-26  7:13       ` Geert Uytterhoeven
2020-09-07 17:47       ` Lukasz Stelmach
2020-09-07 17:47         ` Lukasz Stelmach
2020-09-07 17:39     ` Lukasz Stelmach
2020-09-07 17:39       ` Lukasz Stelmach
2020-09-07 18:18       ` Andrew Lunn
2020-09-07 18:18         ` Andrew Lunn
2020-09-08 17:49         ` Lukasz Stelmach
2020-09-08 17:49           ` Lukasz Stelmach
2020-09-08 18:22           ` Andrew Lunn
2020-09-08 18:22             ` Andrew Lunn
2020-09-14 22:29       ` jim.cromie
2020-09-14 22:29         ` jim.cromie
2020-08-25 18:44   ` Krzysztof Kozlowski
2020-08-25 18:44     ` Krzysztof Kozlowski
2020-08-26 14:59     ` Lukasz Stelmach
2020-08-26 14:59       ` Lukasz Stelmach
2020-08-26 15:06       ` David Laight
2020-08-26 15:06         ` David Laight
2020-08-26 16:07         ` Andrew Lunn
2020-08-26 16:07           ` Andrew Lunn
2020-09-07 18:06         ` Lukasz Stelmach
2020-09-07 18:06           ` Lukasz Stelmach
2020-08-26 16:02       ` Andrew Lunn
2020-08-26 16:02         ` Andrew Lunn
2020-08-26 16:45       ` Krzysztof Kozlowski
2020-08-26 16:45         ` Krzysztof Kozlowski
2020-08-26 16:52         ` Krzysztof Kozlowski
2020-08-26 16:52           ` Krzysztof Kozlowski
2020-08-25 20:49   ` kernel test robot
2020-08-25 20:49     ` kernel test robot
2020-08-25 20:49     ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200826064645.GA12103@pi3 \
    --to=krzk@kernel.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=kgene@kernel.org \
    --cc=kuba@kernel.org \
    --cc=l.stelmach@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=m.szyprowski@samsung.com \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.