From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v2 12/14] arm64: dts: imx8mq-hummingboard-pulse: Align pin configuration group names with schema
Date: Fri, 4 Sep 2020 08:27:41 +0200 [thread overview]
Message-ID: <20200904062743.6273-12-krzk@kernel.org> (raw)
In-Reply-To: <20200904062743.6273-1-krzk@kernel.org>
Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:
... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../boot/dts/freescale/imx8mq-hummingboard-pulse.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
index bfd91c1ed6a5..366693f31992 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
@@ -214,13 +214,13 @@
>;
};
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
>;
};
- pinctrl_usdhc2_vmmc: usdhc2vmmcgpio {
+ pinctrl_usdhc2_vmmc: usdhc2vmmcgpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x41
>;
@@ -238,7 +238,7 @@
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
@@ -250,7 +250,7 @@
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v2 12/14] arm64: dts: imx8mq-hummingboard-pulse: Align pin configuration group names with schema
Date: Fri, 4 Sep 2020 08:27:41 +0200 [thread overview]
Message-ID: <20200904062743.6273-12-krzk@kernel.org> (raw)
In-Reply-To: <20200904062743.6273-1-krzk@kernel.org>
Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:
... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../boot/dts/freescale/imx8mq-hummingboard-pulse.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
index bfd91c1ed6a5..366693f31992 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
@@ -214,13 +214,13 @@
>;
};
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
>;
};
- pinctrl_usdhc2_vmmc: usdhc2vmmcgpio {
+ pinctrl_usdhc2_vmmc: usdhc2vmmcgpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x41
>;
@@ -238,7 +238,7 @@
>;
};
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
@@ -250,7 +250,7 @@
>;
};
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf
--
2.17.1
next prev parent reply other threads:[~2020-09-04 6:30 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-04 6:27 [PATCH v2 01/14] arm64: dts: imx8mm-beacon: Align pin configuration group names with schema Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 02/14] arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 03/14] arm64: dts: imx8mm-evk: Align pin configuration group names with schema Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 04/14] arm64: dts: imx8mm-ddr4-evk: " Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 05/14] arm64: dts: imx8mn-ddr4-evk: Align regulator " Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 06/14] arm64: dts: imx8mn-evk: Align pin configuration group " Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 07/14] arm64: dts: imx8mq-evk: " Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 08/14] arm64: dts: imx8mq-librem5-devkit: " Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 09/14] arm64: dts: imx8mq-phanbell: " Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 10/14] arm64: dts: imx8mq-pico-pi: " Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 11/14] arm64: dts: imx8mq-sr-som: " Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski [this message]
2020-09-04 6:27 ` [PATCH v2 12/14] arm64: dts: imx8mq-hummingboard-pulse: " Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 13/14] arm64: dts: imx8qxp-colibri: " Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-04 6:27 ` [PATCH v2 14/14] ARM: dts: imx28-m28: Align GPMI NAND node name " Krzysztof Kozlowski
2020-09-04 6:27 ` Krzysztof Kozlowski
2020-09-05 8:05 ` Shawn Guo
2020-09-05 8:05 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200904062743.6273-12-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.