[PATCH 0/2] Fixes for the Intel PMC mux driver

[PATCH 0/2] Fixes for the Intel PMC mux driver

[Heikki Krogerus]

Hi,

Here are two of fixes from Utkarsh. Both deal with alternate mode
issues. Let me know if you want anything to be changed.

thanks,

Utkarsh Patel (2):
  usb: typec: intel_pmc_mux: Do not configure Altmode HPD High
  usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in
    Alternate modes

 drivers/usb/typec/mux/intel_pmc_mux.c | 12 ------------
 1 file changed, 12 deletions(-)

-- 
2.28.0

[PATCH 1/2] usb: typec: intel_pmc_mux: Do not configure Altmode HPD High

[Heikki Krogerus]

From: Utkarsh Patel <utkarsh.h.patel@intel.com>

According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.7, bit 14 is reserved in Alternate mode.
In DP Alternate Mode state, if the HPD_STATE (bit 7) field in the
status update command VDO is set to HPD_HIGH, HPD is configured via
separate HPD mode request after configuring DP Alternate mode request.
Configuring reserved bit may show unexpected behaviour.
So do not configure them while issuing the Alternate Mode request.

Fixes: 7990be48ef4d ("usb: typec: mux: intel: Handle alt mode HPD_HIGH")
Cc: stable@vger.kernel.org
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
 drivers/usb/typec/mux/intel_pmc_mux.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index e4021e13af40a..802d443b367c6 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -68,7 +68,6 @@ enum {
 #define PMC_USB_ALTMODE_DP_MODE_SHIFT	8
 
 /* TBT specific Mode Data bits */
-#define PMC_USB_ALTMODE_HPD_HIGH	BIT(14)
 #define PMC_USB_ALTMODE_TBT_TYPE	BIT(17)
 #define PMC_USB_ALTMODE_CABLE_TYPE	BIT(18)
 #define PMC_USB_ALTMODE_ACTIVE_LINK	BIT(20)
@@ -185,9 +184,6 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
 	req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
 			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
 
-	if (data->status & DP_STATUS_HPD_STATE)
-		req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH;
-
 	ret = pmc_usb_command(port, (void *)&req, sizeof(req));
 	if (ret)
 		return ret;
-- 
2.28.0

[PATCH 2/2] usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes

[Heikki Krogerus]

From: Utkarsh Patel <utkarsh.h.patel@intel.com>

According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.7, bits 4 and 5 are reserved in Alternate modes.
SBU Orientation and HSL Orientation needs to be configured only during
initial cable detection in USB connect flow based on device property of
"sbu-orientation" and "hsl-orientation".
Configuring these reserved bits in the Alternate modes may result in delay
in display link training or some unexpected behaviour.
So do not configure them while issuing Alternate Mode requests.

Fixes: ff4a30d5e243 ("usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation")
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
 drivers/usb/typec/mux/intel_pmc_mux.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index 802d443b367c6..3bc08847fb7f0 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -61,8 +61,6 @@ enum {
 
 #define PMC_USB_ALTMODE_ORI_SHIFT	1
 #define PMC_USB_ALTMODE_UFP_SHIFT	3
-#define PMC_USB_ALTMODE_ORI_AUX_SHIFT	4
-#define PMC_USB_ALTMODE_ORI_HSL_SHIFT	5
 
 /* DP specific Mode Data bits */
 #define PMC_USB_ALTMODE_DP_MODE_SHIFT	8
@@ -178,9 +176,6 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
 	req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
 	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
 
-	req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
-	req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
-
 	req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
 			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
 
@@ -208,9 +203,6 @@ pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state)
 	req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
 	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
 
-	req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
-	req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
-
 	if (TBT_ADAPTER(data->device_mode) == TBT_ADAPTER_TBT3)
 		req.mode_data |= PMC_USB_ALTMODE_TBT_TYPE;
 
-- 
2.28.0

Re: [PATCH 2/2] usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes

[Greg Kroah-Hartman]

On Mon, Sep 07, 2020 at 04:57:40PM +0300, Heikki Krogerus wrote:
> From: Utkarsh Patel <utkarsh.h.patel@intel.com>
> 
> According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
> 0.7, bits 4 and 5 are reserved in Alternate modes.
> SBU Orientation and HSL Orientation needs to be configured only during
> initial cable detection in USB connect flow based on device property of
> "sbu-orientation" and "hsl-orientation".
> Configuring these reserved bits in the Alternate modes may result in delay
> in display link training or some unexpected behaviour.
> So do not configure them while issuing Alternate Mode requests.
> 
> Fixes: ff4a30d5e243 ("usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation")
> Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

Shouldn't this also need a cc:stable?

And why not cc: the linux-usb list on these patches?

thanks,

greg k-h

Re: [PATCH 2/2] usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes

[Heikki Krogerus]

On Mon, Sep 07, 2020 at 04:10:58PM +0200, Greg Kroah-Hartman wrote:
> On Mon, Sep 07, 2020 at 04:57:40PM +0300, Heikki Krogerus wrote:
> > From: Utkarsh Patel <utkarsh.h.patel@intel.com>
> > 
> > According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
> > 0.7, bits 4 and 5 are reserved in Alternate modes.
> > SBU Orientation and HSL Orientation needs to be configured only during
> > initial cable detection in USB connect flow based on device property of
> > "sbu-orientation" and "hsl-orientation".
> > Configuring these reserved bits in the Alternate modes may result in delay
> > in display link training or some unexpected behaviour.
> > So do not configure them while issuing Alternate Mode requests.
> > 
> > Fixes: ff4a30d5e243 ("usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation")
> > Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
> > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> 
> Shouldn't this also need a cc:stable?

This one fixes something in 5.8-rcx.

> And why not cc: the linux-usb list on these patches?

I guess "acpi" and "usb" are very similar strings to my brain... I'm
sorry about the wrong list. I'll resend.

thanks,

-- 
heikki

Re: [PATCH 0/2] Fixes for the Intel PMC mux driver

[Heikki Krogerus]

On Mon, Sep 07, 2020 at 04:57:38PM +0300, Heikki Krogerus wrote:
> Hi,
> 
> Here are two of fixes from Utkarsh. Both deal with alternate mode
> issues. Let me know if you want anything to be changed.
> 
> thanks,
> 
> Utkarsh Patel (2):
>   usb: typec: intel_pmc_mux: Do not configure Altmode HPD High
>   usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in
>     Alternate modes
> 
>  drivers/usb/typec/mux/intel_pmc_mux.c | 12 ------------
>  1 file changed, 12 deletions(-)

Wrong mailing list :-/

I'll resend these to the correct usb mailing list.

-- 
heikki

[RESEND PATCH 0/2] [PATCH 0/2] Fixes for the Intel PMC mux driver

[Heikki Krogerus]

Hi,

Here are two of fixes from Utkarsh. Both deal with alternate mode
issues. Let me know if you want anything to be changed.

Sorry again about the wrong list. I send these first accidentally to
linux-acpi@vger.kernel.org

thanks,

Utkarsh Patel (2):
  usb: typec: intel_pmc_mux: Do not configure Altmode HPD High
  usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in
    Alternate modes

 drivers/usb/typec/mux/intel_pmc_mux.c | 12 ------------
 1 file changed, 12 deletions(-)

-- 
2.28.0

[PATCH 2/2] usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes

[Heikki Krogerus]

From: Utkarsh Patel <utkarsh.h.patel@intel.com>

According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.7, bits 4 and 5 are reserved in Alternate modes.
SBU Orientation and HSL Orientation needs to be configured only during
initial cable detection in USB connect flow based on device property of
"sbu-orientation" and "hsl-orientation".
Configuring these reserved bits in the Alternate modes may result in delay
in display link training or some unexpected behaviour.
So do not configure them while issuing Alternate Mode requests.

Fixes: ff4a30d5e243 ("usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation")
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
 drivers/usb/typec/mux/intel_pmc_mux.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index 802d443b367c6..3bc08847fb7f0 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -61,8 +61,6 @@ enum {
 
 #define PMC_USB_ALTMODE_ORI_SHIFT	1
 #define PMC_USB_ALTMODE_UFP_SHIFT	3
-#define PMC_USB_ALTMODE_ORI_AUX_SHIFT	4
-#define PMC_USB_ALTMODE_ORI_HSL_SHIFT	5
 
 /* DP specific Mode Data bits */
 #define PMC_USB_ALTMODE_DP_MODE_SHIFT	8
@@ -178,9 +176,6 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
 	req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
 	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
 
-	req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
-	req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
-
 	req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
 			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
 
@@ -208,9 +203,6 @@ pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state)
 	req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
 	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
 
-	req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
-	req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
-
 	if (TBT_ADAPTER(data->device_mode) == TBT_ADAPTER_TBT3)
 		req.mode_data |= PMC_USB_ALTMODE_TBT_TYPE;
 
-- 
2.28.0

Re: [PATCH 2/2] usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes

[Greg Kroah-Hartman]

On Mon, Sep 07, 2020 at 05:21:52PM +0300, Heikki Krogerus wrote:
> From: Utkarsh Patel <utkarsh.h.patel@intel.com>
> 
> According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
> 0.7, bits 4 and 5 are reserved in Alternate modes.
> SBU Orientation and HSL Orientation needs to be configured only during
> initial cable detection in USB connect flow based on device property of
> "sbu-orientation" and "hsl-orientation".
> Configuring these reserved bits in the Alternate modes may result in delay
> in display link training or some unexpected behaviour.
> So do not configure them while issuing Alternate Mode requests.
> 
> Fixes: ff4a30d5e243 ("usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation")

5.8 is still a stable kernel now, so I'll add cc: stable to this...

thanks,

greg k-h