From: "Christian König" <ckoenig.leichtzumerken@gmail.com>
To: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linaro-mm-sig@lists.linaro.org, linux-mm@kvack.org,
linux-media@vger.kernel.org
Subject: [PATCH 2/2] mm: introduce vma_set_file function
Date: Mon, 14 Sep 2020 15:29:20 +0200 [thread overview]
Message-ID: <20200914132920.59183-3-christian.koenig@amd.com> (raw)
In-Reply-To: <20200914132920.59183-1-christian.koenig@amd.com>
Add the new vma_set_file() function to allow changing
vma->vm_file with the necessary refcount dance.
Signed-off-by: Christian König <christian.koenig@amd.com>
---
drivers/dma-buf/dma-buf.c | 16 +++++-----------
include/linux/mm.h | 2 ++
mm/mmap.c | 16 ++++++++++++++++
3 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index 1699a8e309ef..672f3525ba74 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -1163,20 +1163,14 @@ int dma_buf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma,
return -EINVAL;
/* readjust the vma */
- get_file(dmabuf->file);
- oldfile = vma->vm_file;
- vma->vm_file = dmabuf->file;
+ oldfile = vma_set_file(vma, dmabuf->file);
vma->vm_pgoff = pgoff;
ret = dmabuf->ops->mmap(dmabuf, vma);
- if (ret) {
- /* restore old parameters on failure */
- vma->vm_file = oldfile;
- fput(dmabuf->file);
- } else {
- if (oldfile)
- fput(oldfile);
- }
+ /* restore old parameters on failure */
+ if (ret)
+ vma_set_file(vma, oldfile);
+
return ret;
}
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 1983e08f5906..398a6fdaad1e 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2688,6 +2688,8 @@ static inline void vma_set_page_prot(struct vm_area_struct *vma)
}
#endif
+struct file *vma_set_file(struct vm_area_struct *vma, struct file *file);
+
#ifdef CONFIG_NUMA_BALANCING
unsigned long change_prot_numa(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
diff --git a/mm/mmap.c b/mm/mmap.c
index 40248d84ad5f..d3c3c510f643 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -136,6 +136,22 @@ void vma_set_page_prot(struct vm_area_struct *vma)
WRITE_ONCE(vma->vm_page_prot, vm_page_prot);
}
+/*
+ * Change backing file, only valid to use during initial VMA setup.
+ */
+struct file *vma_set_file(struct vm_area_struct *vma, struct file *file)
+{
+ if (file)
+ get_file(file);
+
+ swap(vma->vm_file, file);
+
+ if (file)
+ fput(file);
+
+ return file;
+}
+
/*
* Requires inode->i_mapping->i_mmap_rwsem
*/
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: "Christian König" <ckoenig.leichtzumerken@gmail.com>
To: akpm@linux-foundation.org
Cc: sumit.semwal@linaro.org, linux-media@vger.kernel.org,
dri-devel@lists.freedesktop.org, linaro-mm-sig@lists.linaro.org,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: [PATCH 2/2] mm: introduce vma_set_file function
Date: Mon, 14 Sep 2020 15:29:20 +0200 [thread overview]
Message-ID: <20200914132920.59183-3-christian.koenig@amd.com> (raw)
In-Reply-To: <20200914132920.59183-1-christian.koenig@amd.com>
Add the new vma_set_file() function to allow changing
vma->vm_file with the necessary refcount dance.
Signed-off-by: Christian König <christian.koenig@amd.com>
---
drivers/dma-buf/dma-buf.c | 16 +++++-----------
include/linux/mm.h | 2 ++
mm/mmap.c | 16 ++++++++++++++++
3 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index 1699a8e309ef..672f3525ba74 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -1163,20 +1163,14 @@ int dma_buf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma,
return -EINVAL;
/* readjust the vma */
- get_file(dmabuf->file);
- oldfile = vma->vm_file;
- vma->vm_file = dmabuf->file;
+ oldfile = vma_set_file(vma, dmabuf->file);
vma->vm_pgoff = pgoff;
ret = dmabuf->ops->mmap(dmabuf, vma);
- if (ret) {
- /* restore old parameters on failure */
- vma->vm_file = oldfile;
- fput(dmabuf->file);
- } else {
- if (oldfile)
- fput(oldfile);
- }
+ /* restore old parameters on failure */
+ if (ret)
+ vma_set_file(vma, oldfile);
+
return ret;
}
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 1983e08f5906..398a6fdaad1e 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2688,6 +2688,8 @@ static inline void vma_set_page_prot(struct vm_area_struct *vma)
}
#endif
+struct file *vma_set_file(struct vm_area_struct *vma, struct file *file);
+
#ifdef CONFIG_NUMA_BALANCING
unsigned long change_prot_numa(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
diff --git a/mm/mmap.c b/mm/mmap.c
index 40248d84ad5f..d3c3c510f643 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -136,6 +136,22 @@ void vma_set_page_prot(struct vm_area_struct *vma)
WRITE_ONCE(vma->vm_page_prot, vm_page_prot);
}
+/*
+ * Change backing file, only valid to use during initial VMA setup.
+ */
+struct file *vma_set_file(struct vm_area_struct *vma, struct file *file)
+{
+ if (file)
+ get_file(file);
+
+ swap(vma->vm_file, file);
+
+ if (file)
+ fput(file);
+
+ return file;
+}
+
/*
* Requires inode->i_mapping->i_mmap_rwsem
*/
--
2.17.1
next prev parent reply other threads:[~2020-09-14 13:29 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-14 13:29 Changing vma->vm_file in dma_buf_mmap() Christian König
2020-09-14 13:29 ` Christian König
2020-09-14 13:29 ` [PATCH 1/2] drm/shmem-helpers: revert "Redirect mmap for imported dma-buf" Christian König
2020-09-14 13:29 ` Christian König
2020-09-15 10:39 ` Daniel Vetter
2020-09-15 10:39 ` Daniel Vetter
2020-09-15 11:03 ` Christian König
2020-09-15 11:03 ` Christian König
2020-09-15 11:07 ` Daniel Vetter
2020-09-15 11:07 ` Daniel Vetter
2020-09-14 13:29 ` Christian König [this message]
2020-09-14 13:29 ` [PATCH 2/2] mm: introduce vma_set_file function Christian König
2020-09-15 9:19 ` kernel test robot
2020-09-15 9:19 ` kernel test robot
2020-09-15 9:19 ` kernel test robot
2020-09-15 11:57 ` kernel test robot
2020-09-15 11:57 ` kernel test robot
2020-09-15 11:57 ` kernel test robot
2020-09-14 13:30 ` Changing vma->vm_file in dma_buf_mmap() Christian König
2020-09-14 13:30 ` Christian König
2020-09-14 14:06 ` Jason Gunthorpe
2020-09-14 14:06 ` Jason Gunthorpe
2020-09-14 18:26 ` Christian König
2020-09-14 18:26 ` Christian König
2020-09-16 9:53 ` Daniel Vetter
2020-09-16 9:53 ` Daniel Vetter
2020-09-16 10:14 ` Christian König
2020-09-16 10:14 ` Christian König
2020-09-16 11:45 ` Christian König
2020-09-16 11:45 ` Christian König
2020-09-16 12:41 ` Daniel Vetter
2020-09-16 12:41 ` Daniel Vetter
2020-09-16 14:07 ` Jason Gunthorpe
2020-09-16 14:07 ` Jason Gunthorpe
2020-09-16 14:14 ` Christian König
2020-09-16 14:14 ` Christian König
2020-09-16 15:24 ` Daniel Vetter
2020-09-16 15:24 ` Daniel Vetter
2020-09-16 15:31 ` [Linaro-mm-sig] " Christian König
2020-09-16 15:31 ` Christian König
2020-09-17 6:23 ` Daniel Vetter
2020-09-17 6:23 ` Daniel Vetter
2020-09-17 7:11 ` Christian König
2020-09-17 7:11 ` Christian König
2020-09-17 8:09 ` Daniel Vetter
2020-09-17 8:09 ` Daniel Vetter
2020-09-17 11:31 ` Jason Gunthorpe
2020-09-17 11:31 ` Jason Gunthorpe
2020-09-17 12:03 ` Christian König
2020-09-17 12:03 ` Christian König
2020-09-17 12:18 ` Jason Gunthorpe
2020-09-17 12:18 ` Jason Gunthorpe
2020-09-17 12:24 ` Christian König
2020-09-17 12:24 ` Christian König
2020-09-17 12:26 ` Daniel Vetter
2020-09-17 12:26 ` Daniel Vetter
2020-09-17 14:35 ` Jason Gunthorpe
2020-09-17 14:35 ` Jason Gunthorpe
2020-09-17 14:54 ` Christian König
2020-09-17 14:54 ` Christian König
2020-09-17 15:24 ` Jason Gunthorpe
2020-09-17 15:24 ` Jason Gunthorpe
2020-09-17 15:37 ` Daniel Vetter
2020-09-17 15:37 ` Daniel Vetter
2020-09-17 16:06 ` Christian König
2020-09-17 16:06 ` Christian König
2020-09-17 16:39 ` Jason Gunthorpe
2020-09-17 16:39 ` Jason Gunthorpe
2020-09-17 17:23 ` Daniel Vetter
2020-09-17 17:23 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200914132920.59183-3-christian.koenig@amd.com \
--to=ckoenig.leichtzumerken@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linaro-mm-sig@lists.linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.