* [PATCH v2 0/3] PCI: iproc: Add fixes to pcie iproc
@ 2020-09-15 13:45 ` Srinath Mannam
0 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-15 13:45 UTC (permalink / raw)
To: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui
Cc: linux-pci, Srinath Mannam, bcm-kernel-feedback-list, linux-kernel,
linux-arm-kernel
This patch series contains fixes and improvements to pcie iproc driver.
This patch set is based on Linux-5.9.0-rc2.
Changes from v1:
- Addressed Bjorn's review comments
- pcie_print_link_status is used to print Link information.
- Added IARR1/IMAP1 window map definition.
Bharat Gooty (1):
PCI: iproc: fix out of bound array access
Roman Bacik (1):
PCI: iproc: fix invalidating PAXB address mapping
Srinath Mannam (1):
PCI: iproc: Display PCIe Link information
drivers/pci/controller/pcie-iproc.c | 29 ++++++++++++++++++++++-------
1 file changed, 22 insertions(+), 7 deletions(-)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread* [PATCH v2 1/3] PCI: iproc: fix out of bound array access
2020-09-15 13:45 ` Srinath Mannam
@ 2020-09-15 13:45 ` Srinath Mannam
-1 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-15 13:45 UTC (permalink / raw)
To: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui
Cc: bcm-kernel-feedback-list, linux-pci, linux-arm-kernel,
linux-kernel, Bharat Gooty
From: Bharat Gooty <bharat.gooty@broadcom.com>
Declare the full size array for all revisions of PAX register sets
to avoid potentially out of bound access of the register array
when they are being initialized in the 'iproc_pcie_rev_init'
function.
Fixes: 06324ede76cdf ("PCI: iproc: Improve core register population")
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
---
drivers/pci/controller/pcie-iproc.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index 905e93808243..d901b9d392b8 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -307,7 +307,7 @@ enum iproc_pcie_reg {
};
/* iProc PCIe PAXB BCMA registers */
-static const u16 iproc_pcie_reg_paxb_bcma[] = {
+static const u16 iproc_pcie_reg_paxb_bcma[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_CLK_CTRL] = 0x000,
[IPROC_PCIE_CFG_IND_ADDR] = 0x120,
[IPROC_PCIE_CFG_IND_DATA] = 0x124,
@@ -318,7 +318,7 @@ static const u16 iproc_pcie_reg_paxb_bcma[] = {
};
/* iProc PCIe PAXB registers */
-static const u16 iproc_pcie_reg_paxb[] = {
+static const u16 iproc_pcie_reg_paxb[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_CLK_CTRL] = 0x000,
[IPROC_PCIE_CFG_IND_ADDR] = 0x120,
[IPROC_PCIE_CFG_IND_DATA] = 0x124,
@@ -334,7 +334,7 @@ static const u16 iproc_pcie_reg_paxb[] = {
};
/* iProc PCIe PAXB v2 registers */
-static const u16 iproc_pcie_reg_paxb_v2[] = {
+static const u16 iproc_pcie_reg_paxb_v2[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_CLK_CTRL] = 0x000,
[IPROC_PCIE_CFG_IND_ADDR] = 0x120,
[IPROC_PCIE_CFG_IND_DATA] = 0x124,
@@ -363,7 +363,7 @@ static const u16 iproc_pcie_reg_paxb_v2[] = {
};
/* iProc PCIe PAXC v1 registers */
-static const u16 iproc_pcie_reg_paxc[] = {
+static const u16 iproc_pcie_reg_paxc[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_CLK_CTRL] = 0x000,
[IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
[IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
@@ -372,7 +372,7 @@ static const u16 iproc_pcie_reg_paxc[] = {
};
/* iProc PCIe PAXC v2 registers */
-static const u16 iproc_pcie_reg_paxc_v2[] = {
+static const u16 iproc_pcie_reg_paxc_v2[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_MSI_GIC_MODE] = 0x050,
[IPROC_PCIE_MSI_BASE_ADDR] = 0x074,
[IPROC_PCIE_MSI_WINDOW_SIZE] = 0x078,
--
2.17.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v2 1/3] PCI: iproc: fix out of bound array access
@ 2020-09-15 13:45 ` Srinath Mannam
0 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-15 13:45 UTC (permalink / raw)
To: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui
Cc: linux-pci, bcm-kernel-feedback-list, linux-kernel,
linux-arm-kernel, Bharat Gooty
From: Bharat Gooty <bharat.gooty@broadcom.com>
Declare the full size array for all revisions of PAX register sets
to avoid potentially out of bound access of the register array
when they are being initialized in the 'iproc_pcie_rev_init'
function.
Fixes: 06324ede76cdf ("PCI: iproc: Improve core register population")
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
---
drivers/pci/controller/pcie-iproc.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index 905e93808243..d901b9d392b8 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -307,7 +307,7 @@ enum iproc_pcie_reg {
};
/* iProc PCIe PAXB BCMA registers */
-static const u16 iproc_pcie_reg_paxb_bcma[] = {
+static const u16 iproc_pcie_reg_paxb_bcma[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_CLK_CTRL] = 0x000,
[IPROC_PCIE_CFG_IND_ADDR] = 0x120,
[IPROC_PCIE_CFG_IND_DATA] = 0x124,
@@ -318,7 +318,7 @@ static const u16 iproc_pcie_reg_paxb_bcma[] = {
};
/* iProc PCIe PAXB registers */
-static const u16 iproc_pcie_reg_paxb[] = {
+static const u16 iproc_pcie_reg_paxb[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_CLK_CTRL] = 0x000,
[IPROC_PCIE_CFG_IND_ADDR] = 0x120,
[IPROC_PCIE_CFG_IND_DATA] = 0x124,
@@ -334,7 +334,7 @@ static const u16 iproc_pcie_reg_paxb[] = {
};
/* iProc PCIe PAXB v2 registers */
-static const u16 iproc_pcie_reg_paxb_v2[] = {
+static const u16 iproc_pcie_reg_paxb_v2[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_CLK_CTRL] = 0x000,
[IPROC_PCIE_CFG_IND_ADDR] = 0x120,
[IPROC_PCIE_CFG_IND_DATA] = 0x124,
@@ -363,7 +363,7 @@ static const u16 iproc_pcie_reg_paxb_v2[] = {
};
/* iProc PCIe PAXC v1 registers */
-static const u16 iproc_pcie_reg_paxc[] = {
+static const u16 iproc_pcie_reg_paxc[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_CLK_CTRL] = 0x000,
[IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
[IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
@@ -372,7 +372,7 @@ static const u16 iproc_pcie_reg_paxc[] = {
};
/* iProc PCIe PAXC v2 registers */
-static const u16 iproc_pcie_reg_paxc_v2[] = {
+static const u16 iproc_pcie_reg_paxc_v2[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_MSI_GIC_MODE] = 0x050,
[IPROC_PCIE_MSI_BASE_ADDR] = 0x074,
[IPROC_PCIE_MSI_WINDOW_SIZE] = 0x078,
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 2/3] PCI: iproc: fix invalidating PAXB address mapping
2020-09-15 13:45 ` Srinath Mannam
@ 2020-09-15 13:45 ` Srinath Mannam
-1 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-15 13:45 UTC (permalink / raw)
To: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui
Cc: bcm-kernel-feedback-list, linux-pci, linux-arm-kernel,
linux-kernel, Roman Bacik, Srinath Mannam
From: Roman Bacik <roman.bacik@broadcom.com>
Second stage bootloader prior to Linux boot may use all inbound windows
including IARR1/IMAP1. We need to ensure all previous configuration of
inbound windows are invalidated during the initialization stage of the
Linux iProc PCIe driver. Add fix to define and invalidate IARR1/IMAP1
because it was missed in previous patch.
Fixes: 9415743e4c8a ("PCI: iproc: Invalidate PAXB address mapping")
Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
---
drivers/pci/controller/pcie-iproc.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index d901b9d392b8..cc5b7823edeb 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -192,8 +192,15 @@ static const struct iproc_pcie_ib_map paxb_v2_ib_map[] = {
.imap_window_offset = 0x4,
},
{
- /* IARR1/IMAP1 (currently unused) */
- .type = IPROC_PCIE_IB_MAP_INVALID,
+ /* IARR1/IMAP1 */
+ .type = IPROC_PCIE_IB_MAP_MEM,
+ .size_unit = SZ_1M,
+ .region_sizes = { 8 },
+ .nr_sizes = 1,
+ .nr_windows = 8,
+ .imap_addr_offset = 0x4,
+ .imap_window_offset = 0x8,
+
},
{
/* IARR2/IMAP2 */
@@ -351,6 +358,8 @@ static const u16 iproc_pcie_reg_paxb_v2[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_OMAP3] = 0xdf8,
[IPROC_PCIE_IARR0] = 0xd00,
[IPROC_PCIE_IMAP0] = 0xc00,
+ [IPROC_PCIE_IARR1] = 0xd08,
+ [IPROC_PCIE_IMAP1] = 0xd70,
[IPROC_PCIE_IARR2] = 0xd10,
[IPROC_PCIE_IMAP2] = 0xcc0,
[IPROC_PCIE_IARR3] = 0xe00,
--
2.17.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v2 2/3] PCI: iproc: fix invalidating PAXB address mapping
@ 2020-09-15 13:45 ` Srinath Mannam
0 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-15 13:45 UTC (permalink / raw)
To: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui
Cc: Roman Bacik, linux-pci, linux-kernel, Srinath Mannam,
bcm-kernel-feedback-list, linux-arm-kernel
From: Roman Bacik <roman.bacik@broadcom.com>
Second stage bootloader prior to Linux boot may use all inbound windows
including IARR1/IMAP1. We need to ensure all previous configuration of
inbound windows are invalidated during the initialization stage of the
Linux iProc PCIe driver. Add fix to define and invalidate IARR1/IMAP1
because it was missed in previous patch.
Fixes: 9415743e4c8a ("PCI: iproc: Invalidate PAXB address mapping")
Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
---
drivers/pci/controller/pcie-iproc.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index d901b9d392b8..cc5b7823edeb 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -192,8 +192,15 @@ static const struct iproc_pcie_ib_map paxb_v2_ib_map[] = {
.imap_window_offset = 0x4,
},
{
- /* IARR1/IMAP1 (currently unused) */
- .type = IPROC_PCIE_IB_MAP_INVALID,
+ /* IARR1/IMAP1 */
+ .type = IPROC_PCIE_IB_MAP_MEM,
+ .size_unit = SZ_1M,
+ .region_sizes = { 8 },
+ .nr_sizes = 1,
+ .nr_windows = 8,
+ .imap_addr_offset = 0x4,
+ .imap_window_offset = 0x8,
+
},
{
/* IARR2/IMAP2 */
@@ -351,6 +358,8 @@ static const u16 iproc_pcie_reg_paxb_v2[IPROC_PCIE_MAX_NUM_REG] = {
[IPROC_PCIE_OMAP3] = 0xdf8,
[IPROC_PCIE_IARR0] = 0xd00,
[IPROC_PCIE_IMAP0] = 0xc00,
+ [IPROC_PCIE_IARR1] = 0xd08,
+ [IPROC_PCIE_IMAP1] = 0xd70,
[IPROC_PCIE_IARR2] = 0xd10,
[IPROC_PCIE_IMAP2] = 0xcc0,
[IPROC_PCIE_IARR3] = 0xe00,
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 3/3] PCI: iproc: Display PCIe Link information
2020-09-15 13:45 ` Srinath Mannam
@ 2020-09-15 13:45 ` Srinath Mannam
-1 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-15 13:45 UTC (permalink / raw)
To: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui
Cc: bcm-kernel-feedback-list, linux-pci, linux-arm-kernel,
linux-kernel, Srinath Mannam
After successful linkup more comprehensive information about PCIe link
speed and link width will be displayed to the console.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
---
drivers/pci/controller/pcie-iproc.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index cc5b7823edeb..8ef2d1fe392c 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -1479,6 +1479,7 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
{
struct device *dev;
int ret;
+ struct pci_dev *pdev;
struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
dev = pcie->dev;
@@ -1542,6 +1543,11 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
goto err_power_off_phy;
}
+ for_each_pci_bridge(pdev, host->bus) {
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
+ pcie_print_link_status(pdev);
+ }
+
return 0;
err_power_off_phy:
--
2.17.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v2 3/3] PCI: iproc: Display PCIe Link information
@ 2020-09-15 13:45 ` Srinath Mannam
0 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-15 13:45 UTC (permalink / raw)
To: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui
Cc: linux-pci, Srinath Mannam, bcm-kernel-feedback-list, linux-kernel,
linux-arm-kernel
After successful linkup more comprehensive information about PCIe link
speed and link width will be displayed to the console.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
---
drivers/pci/controller/pcie-iproc.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index cc5b7823edeb..8ef2d1fe392c 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -1479,6 +1479,7 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
{
struct device *dev;
int ret;
+ struct pci_dev *pdev;
struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
dev = pcie->dev;
@@ -1542,6 +1543,11 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
goto err_power_off_phy;
}
+ for_each_pci_bridge(pdev, host->bus) {
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
+ pcie_print_link_status(pdev);
+ }
+
return 0;
err_power_off_phy:
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v2 3/3] PCI: iproc: Display PCIe Link information
2020-09-15 13:45 ` Srinath Mannam
@ 2020-09-17 1:52 ` Rob Herring
-1 siblings, 0 replies; 16+ messages in thread
From: Rob Herring @ 2020-09-17 1:52 UTC (permalink / raw)
To: Srinath Mannam
Cc: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui, linux-pci,
bcm-kernel-feedback-list, linux-kernel, linux-arm-kernel
On Tue, Sep 15, 2020 at 07:15:41PM +0530, Srinath Mannam wrote:
> After successful linkup more comprehensive information about PCIe link
> speed and link width will be displayed to the console.
>
> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
> ---
> drivers/pci/controller/pcie-iproc.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
> index cc5b7823edeb..8ef2d1fe392c 100644
> --- a/drivers/pci/controller/pcie-iproc.c
> +++ b/drivers/pci/controller/pcie-iproc.c
> @@ -1479,6 +1479,7 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> {
> struct device *dev;
> int ret;
> + struct pci_dev *pdev;
> struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
>
> dev = pcie->dev;
> @@ -1542,6 +1543,11 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> goto err_power_off_phy;
> }
>
> + for_each_pci_bridge(pdev, host->bus) {
> + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
> + pcie_print_link_status(pdev);
> + }
If this information is useful for 1 host implementation, why not all of
them and put this in a common spot.
Rob
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v2 3/3] PCI: iproc: Display PCIe Link information
@ 2020-09-17 1:52 ` Rob Herring
0 siblings, 0 replies; 16+ messages in thread
From: Rob Herring @ 2020-09-17 1:52 UTC (permalink / raw)
To: Srinath Mannam
Cc: Lorenzo Pieralisi, Ray Jui, linux-kernel,
bcm-kernel-feedback-list, linux-pci, Bjorn Helgaas,
linux-arm-kernel
On Tue, Sep 15, 2020 at 07:15:41PM +0530, Srinath Mannam wrote:
> After successful linkup more comprehensive information about PCIe link
> speed and link width will be displayed to the console.
>
> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
> ---
> drivers/pci/controller/pcie-iproc.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
> index cc5b7823edeb..8ef2d1fe392c 100644
> --- a/drivers/pci/controller/pcie-iproc.c
> +++ b/drivers/pci/controller/pcie-iproc.c
> @@ -1479,6 +1479,7 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> {
> struct device *dev;
> int ret;
> + struct pci_dev *pdev;
> struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
>
> dev = pcie->dev;
> @@ -1542,6 +1543,11 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> goto err_power_off_phy;
> }
>
> + for_each_pci_bridge(pdev, host->bus) {
> + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
> + pcie_print_link_status(pdev);
> + }
If this information is useful for 1 host implementation, why not all of
them and put this in a common spot.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v2 3/3] PCI: iproc: Display PCIe Link information
2020-09-17 1:52 ` Rob Herring
@ 2020-09-17 3:12 ` Srinath Mannam
-1 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-17 3:12 UTC (permalink / raw)
To: Rob Herring
Cc: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui, linux-pci,
BCM Kernel Feedback, Linux Kernel Mailing List, Linux ARM
On Thu, Sep 17, 2020 at 7:22 AM Rob Herring <robh@kernel.org> wrote:
>
Hi Rob,
Thanks for review.
> On Tue, Sep 15, 2020 at 07:15:41PM +0530, Srinath Mannam wrote:
> > After successful linkup more comprehensive information about PCIe link
> > speed and link width will be displayed to the console.
> >
> > Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
> > ---
> > drivers/pci/controller/pcie-iproc.c | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
> > index cc5b7823edeb..8ef2d1fe392c 100644
> > --- a/drivers/pci/controller/pcie-iproc.c
> > +++ b/drivers/pci/controller/pcie-iproc.c
> > @@ -1479,6 +1479,7 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> > {
> > struct device *dev;
> > int ret;
> > + struct pci_dev *pdev;
> > struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
> >
> > dev = pcie->dev;
> > @@ -1542,6 +1543,11 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> > goto err_power_off_phy;
> > }
> >
> > + for_each_pci_bridge(pdev, host->bus) {
> > + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
> > + pcie_print_link_status(pdev);
> > + }
>
> If this information is useful for 1 host implementation, why not all of
> them and put this in a common spot.
In common, pcie_print_link_status() is called during pci device caps
initialization, if the available link bandwidth is less than capabilities
of devices. Few EP drivers also used this function to print link
bandwidth info. This host can be configured for different link
speeds and link widths on different platforms so we thought
displaying link bandwidth after successful linkup is helpful to
know link details.
Thanks & Regards,
Srinath.
>
> Rob
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v2 3/3] PCI: iproc: Display PCIe Link information
@ 2020-09-17 3:12 ` Srinath Mannam
0 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-17 3:12 UTC (permalink / raw)
To: Rob Herring
Cc: Lorenzo Pieralisi, Ray Jui, Linux Kernel Mailing List,
BCM Kernel Feedback, linux-pci, Bjorn Helgaas, Linux ARM
On Thu, Sep 17, 2020 at 7:22 AM Rob Herring <robh@kernel.org> wrote:
>
Hi Rob,
Thanks for review.
> On Tue, Sep 15, 2020 at 07:15:41PM +0530, Srinath Mannam wrote:
> > After successful linkup more comprehensive information about PCIe link
> > speed and link width will be displayed to the console.
> >
> > Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
> > ---
> > drivers/pci/controller/pcie-iproc.c | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
> > index cc5b7823edeb..8ef2d1fe392c 100644
> > --- a/drivers/pci/controller/pcie-iproc.c
> > +++ b/drivers/pci/controller/pcie-iproc.c
> > @@ -1479,6 +1479,7 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> > {
> > struct device *dev;
> > int ret;
> > + struct pci_dev *pdev;
> > struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
> >
> > dev = pcie->dev;
> > @@ -1542,6 +1543,11 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
> > goto err_power_off_phy;
> > }
> >
> > + for_each_pci_bridge(pdev, host->bus) {
> > + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
> > + pcie_print_link_status(pdev);
> > + }
>
> If this information is useful for 1 host implementation, why not all of
> them and put this in a common spot.
In common, pcie_print_link_status() is called during pci device caps
initialization, if the available link bandwidth is less than capabilities
of devices. Few EP drivers also used this function to print link
bandwidth info. This host can be configured for different link
speeds and link widths on different platforms so we thought
displaying link bandwidth after successful linkup is helpful to
know link details.
Thanks & Regards,
Srinath.
>
> Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 0/3] PCI: iproc: Add fixes to pcie iproc
2020-09-15 13:45 ` Srinath Mannam
@ 2020-09-16 22:08 ` Bjorn Helgaas
-1 siblings, 0 replies; 16+ messages in thread
From: Bjorn Helgaas @ 2020-09-16 22:08 UTC (permalink / raw)
To: Srinath Mannam
Cc: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui,
bcm-kernel-feedback-list, linux-pci, linux-arm-kernel,
linux-kernel
On Tue, Sep 15, 2020 at 07:15:38PM +0530, Srinath Mannam wrote:
> This patch series contains fixes and improvements to pcie iproc driver.
>
> This patch set is based on Linux-5.9.0-rc2.
>
> Changes from v1:
> - Addressed Bjorn's review comments
> - pcie_print_link_status is used to print Link information.
> - Added IARR1/IMAP1 window map definition.
>
> Bharat Gooty (1):
> PCI: iproc: fix out of bound array access
>
> Roman Bacik (1):
> PCI: iproc: fix invalidating PAXB address mapping
You didn't update thest subject lines so they match.
https://lore.kernel.org/r/20200326194810.GA11112@google.com
> Srinath Mannam (1):
> PCI: iproc: Display PCIe Link information
>
> drivers/pci/controller/pcie-iproc.c | 29 ++++++++++++++++++++++-------
> 1 file changed, 22 insertions(+), 7 deletions(-)
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 0/3] PCI: iproc: Add fixes to pcie iproc
@ 2020-09-16 22:08 ` Bjorn Helgaas
0 siblings, 0 replies; 16+ messages in thread
From: Bjorn Helgaas @ 2020-09-16 22:08 UTC (permalink / raw)
To: Srinath Mannam
Cc: Lorenzo Pieralisi, Ray Jui, linux-kernel,
bcm-kernel-feedback-list, linux-pci, Bjorn Helgaas,
linux-arm-kernel
On Tue, Sep 15, 2020 at 07:15:38PM +0530, Srinath Mannam wrote:
> This patch series contains fixes and improvements to pcie iproc driver.
>
> This patch set is based on Linux-5.9.0-rc2.
>
> Changes from v1:
> - Addressed Bjorn's review comments
> - pcie_print_link_status is used to print Link information.
> - Added IARR1/IMAP1 window map definition.
>
> Bharat Gooty (1):
> PCI: iproc: fix out of bound array access
>
> Roman Bacik (1):
> PCI: iproc: fix invalidating PAXB address mapping
You didn't update thest subject lines so they match.
https://lore.kernel.org/r/20200326194810.GA11112@google.com
> Srinath Mannam (1):
> PCI: iproc: Display PCIe Link information
>
> drivers/pci/controller/pcie-iproc.c | 29 ++++++++++++++++++++++-------
> 1 file changed, 22 insertions(+), 7 deletions(-)
>
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 0/3] PCI: iproc: Add fixes to pcie iproc
2020-09-16 22:08 ` Bjorn Helgaas
@ 2020-09-17 2:44 ` Srinath Mannam
-1 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-17 2:44 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Lorenzo Pieralisi, Bjorn Helgaas, Ray Jui, BCM Kernel Feedback,
linux-pci, Linux ARM, Linux Kernel Mailing List
On Thu, Sep 17, 2020 at 3:38 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
Hi Bjorn,
Thanks for review.
> On Tue, Sep 15, 2020 at 07:15:38PM +0530, Srinath Mannam wrote:
> > This patch series contains fixes and improvements to pcie iproc driver.
> >
> > This patch set is based on Linux-5.9.0-rc2.
> >
> > Changes from v1:
> > - Addressed Bjorn's review comments
> > - pcie_print_link_status is used to print Link information.
> > - Added IARR1/IMAP1 window map definition.
> >
> > Bharat Gooty (1):
> > PCI: iproc: fix out of bound array access
> >
> > Roman Bacik (1):
> > PCI: iproc: fix invalidating PAXB address mapping
>
> You didn't update thest subject lines so they match.
> https://lore.kernel.org/r/20200326194810.GA11112@google.com
Yes this patchset is the latest version to the patches in the link.
My apologies that I missed to address your review comment about
the commit message of "PCI: iproc: fix out of bound array access"
in this patchset.
Thanks & Regards,
Srinath.
>
> > Srinath Mannam (1):
> > PCI: iproc: Display PCIe Link information
> >
> > drivers/pci/controller/pcie-iproc.c | 29 ++++++++++++++++++++++-------
> > 1 file changed, 22 insertions(+), 7 deletions(-)
> >
> > --
> > 2.17.1
> >
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 0/3] PCI: iproc: Add fixes to pcie iproc
@ 2020-09-17 2:44 ` Srinath Mannam
0 siblings, 0 replies; 16+ messages in thread
From: Srinath Mannam @ 2020-09-17 2:44 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Lorenzo Pieralisi, Ray Jui, Linux Kernel Mailing List,
BCM Kernel Feedback, linux-pci, Bjorn Helgaas, Linux ARM
On Thu, Sep 17, 2020 at 3:38 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
Hi Bjorn,
Thanks for review.
> On Tue, Sep 15, 2020 at 07:15:38PM +0530, Srinath Mannam wrote:
> > This patch series contains fixes and improvements to pcie iproc driver.
> >
> > This patch set is based on Linux-5.9.0-rc2.
> >
> > Changes from v1:
> > - Addressed Bjorn's review comments
> > - pcie_print_link_status is used to print Link information.
> > - Added IARR1/IMAP1 window map definition.
> >
> > Bharat Gooty (1):
> > PCI: iproc: fix out of bound array access
> >
> > Roman Bacik (1):
> > PCI: iproc: fix invalidating PAXB address mapping
>
> You didn't update thest subject lines so they match.
> https://lore.kernel.org/r/20200326194810.GA11112@google.com
Yes this patchset is the latest version to the patches in the link.
My apologies that I missed to address your review comment about
the commit message of "PCI: iproc: fix out of bound array access"
in this patchset.
Thanks & Regards,
Srinath.
>
> > Srinath Mannam (1):
> > PCI: iproc: Display PCIe Link information
> >
> > drivers/pci/controller/pcie-iproc.c | 29 ++++++++++++++++++++++-------
> > 1 file changed, 22 insertions(+), 7 deletions(-)
> >
> > --
> > 2.17.1
> >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread