All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>,
	Will Deacon <will@kernel.org>, Adam Ford <aford173@gmail.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	aford@beaconembedded.com, linux-kernel@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH 1/5] arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter
Date: Mon, 19 Oct 2020 12:45:24 -0500	[thread overview]
Message-ID: <20201019174529.289499-1-aford173@gmail.com> (raw)

The driver exists for the Enhanced Asynchronous Sample Rate Converter
(EASRC) Controller, but there isn't a device tree entry for it.

On the vendor kernel, they put this on a spba-bus for SDMA support.

Add the the node for the spba-bus with the easrc node inside.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 746faf1cf2fb..7d34281332e1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -246,6 +246,34 @@ aips1: bus@30000000 {
 			#size-cells = <1>;
 			ranges;
 
+			spba-bus@30000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30000000 0x100000>;
+				ranges;
+
+				easrc: easrc@300C0000 {
+					compatible = "fsl,imx8mn-easrc";
+					reg = <0x300C0000 0x10000>;
+					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+					clock-names = "mem";
+					dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+					       <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+					       <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+					       <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+					dma-names = "ctx0_rx", "ctx0_tx",
+						    "ctx1_rx", "ctx1_tx",
+						    "ctx2_rx", "ctx2_tx",
+						    "ctx3_rx", "ctx3_tx";
+					fsl,easrc-ram-script-name = "imx/easrc/easrc-imx8mn.bin";
+					fsl,asrc-rate  = <8000>;
+					fsl,asrc-width = <16>;
+					status = "disabled";
+				};
+			};
+
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
 				reg = <0x30200000 0x10000>;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/5] arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter
Date: Mon, 19 Oct 2020 12:45:24 -0500	[thread overview]
Message-ID: <20201019174529.289499-1-aford173@gmail.com> (raw)

The driver exists for the Enhanced Asynchronous Sample Rate Converter
(EASRC) Controller, but there isn't a device tree entry for it.

On the vendor kernel, they put this on a spba-bus for SDMA support.

Add the the node for the spba-bus with the easrc node inside.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 746faf1cf2fb..7d34281332e1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -246,6 +246,34 @@ aips1: bus@30000000 {
 			#size-cells = <1>;
 			ranges;
 
+			spba-bus@30000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30000000 0x100000>;
+				ranges;
+
+				easrc: easrc@300C0000 {
+					compatible = "fsl,imx8mn-easrc";
+					reg = <0x300C0000 0x10000>;
+					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+					clock-names = "mem";
+					dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+					       <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+					       <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+					       <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+					dma-names = "ctx0_rx", "ctx0_tx",
+						    "ctx1_rx", "ctx1_tx",
+						    "ctx2_rx", "ctx2_tx",
+						    "ctx3_rx", "ctx3_tx";
+					fsl,easrc-ram-script-name = "imx/easrc/easrc-imx8mn.bin";
+					fsl,asrc-rate  = <8000>;
+					fsl,asrc-width = <16>;
+					status = "disabled";
+				};
+			};
+
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
 				reg = <0x30200000 0x10000>;
-- 
2.25.1


             reply	other threads:[~2020-10-19 17:47 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-19 17:45 Adam Ford [this message]
2020-10-19 17:45 ` [PATCH 1/5] arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter Adam Ford
2020-10-19 17:45 ` [PATCH 2/5] arm64: defconfig: Enable ASRC and EASRC Adam Ford
2020-10-19 17:45   ` Adam Ford
2020-11-01  1:02   ` Shawn Guo
2020-11-01  1:02     ` Shawn Guo
2020-10-19 17:45 ` [PATCH 3/5] arm64: dts: imx8mn: Add SAI nodes Adam Ford
2020-10-19 17:45   ` Adam Ford
2020-10-19 17:45 ` [PATCH 4/5] arm64: dts: imx8mn: Add support for micfil Adam Ford
2020-10-19 17:45   ` Adam Ford
2020-10-19 17:45 ` [PATCH 5/5] arm64: dts: imx8mn: Add node for SPDIF Adam Ford
2020-10-19 17:45   ` Adam Ford
2020-11-01  2:03 ` [PATCH 1/5] arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter Shawn Guo
2020-11-01  2:03   ` Shawn Guo
2020-11-01 13:18   ` Adam Ford
2020-11-01 13:18     ` Adam Ford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201019174529.289499-1-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=aford@beaconembedded.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.