From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>,
Will Deacon <will@kernel.org>, Adam Ford <aford173@gmail.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
aford@beaconembedded.com, linux-kernel@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Catalin Marinas <catalin.marinas@arm.com>,
Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH 5/5] arm64: dts: imx8mn: Add node for SPDIF
Date: Mon, 19 Oct 2020 12:45:28 -0500 [thread overview]
Message-ID: <20201019174529.289499-5-aford173@gmail.com> (raw)
In-Reply-To: <20201019174529.289499-1-aford173@gmail.com>
The i.MX8M Nano can support SPDIF which is compatible to the
IP used on the i.MX35.
Add the node.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 3ab9486736ca..4b32c5aa355d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -334,6 +334,30 @@ micfil: micfil@30080000 {
status = "disabled";
};
+ spdif1: spdif@30090000 {
+ compatible = "fsl,imx35-spdif";
+ reg = <0x30090000 0x10000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */
+ <&clk IMX8MN_CLK_24M>, /* rxtx0 */
+ <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */
+ <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */
+ <&clk IMX8MN_CLK_DUMMY>; /* spba */
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "spba";
+ dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
sai7: sai@300b0000 {
compatible = "fsl,imx8mq-sai",
"fsl,imx6sx-sai";
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 5/5] arm64: dts: imx8mn: Add node for SPDIF
Date: Mon, 19 Oct 2020 12:45:28 -0500 [thread overview]
Message-ID: <20201019174529.289499-5-aford173@gmail.com> (raw)
In-Reply-To: <20201019174529.289499-1-aford173@gmail.com>
The i.MX8M Nano can support SPDIF which is compatible to the
IP used on the i.MX35.
Add the node.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 3ab9486736ca..4b32c5aa355d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -334,6 +334,30 @@ micfil: micfil@30080000 {
status = "disabled";
};
+ spdif1: spdif@30090000 {
+ compatible = "fsl,imx35-spdif";
+ reg = <0x30090000 0x10000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */
+ <&clk IMX8MN_CLK_24M>, /* rxtx0 */
+ <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */
+ <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */
+ <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */
+ <&clk IMX8MN_CLK_DUMMY>; /* spba */
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "spba";
+ dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
sai7: sai@300b0000 {
compatible = "fsl,imx8mq-sai",
"fsl,imx6sx-sai";
--
2.25.1
next prev parent reply other threads:[~2020-10-19 17:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-19 17:45 [PATCH 1/5] arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter Adam Ford
2020-10-19 17:45 ` Adam Ford
2020-10-19 17:45 ` [PATCH 2/5] arm64: defconfig: Enable ASRC and EASRC Adam Ford
2020-10-19 17:45 ` Adam Ford
2020-11-01 1:02 ` Shawn Guo
2020-11-01 1:02 ` Shawn Guo
2020-10-19 17:45 ` [PATCH 3/5] arm64: dts: imx8mn: Add SAI nodes Adam Ford
2020-10-19 17:45 ` Adam Ford
2020-10-19 17:45 ` [PATCH 4/5] arm64: dts: imx8mn: Add support for micfil Adam Ford
2020-10-19 17:45 ` Adam Ford
2020-10-19 17:45 ` Adam Ford [this message]
2020-10-19 17:45 ` [PATCH 5/5] arm64: dts: imx8mn: Add node for SPDIF Adam Ford
2020-11-01 2:03 ` [PATCH 1/5] arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter Shawn Guo
2020-11-01 2:03 ` Shawn Guo
2020-11-01 13:18 ` Adam Ford
2020-11-01 13:18 ` Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201019174529.289499-5-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.