From: Shawn Guo <shawnguo@kernel.org>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
kernel@pengutronix.de, netdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
Fabio Estevam <festevam@gmail.com>,
David Jander <david@protonic.nl>,
Russell King <linux@armlinux.org.uk>,
Philippe Schenker <philippe.schenker@toradex.com>
Subject: Re: [PATCH v2 0/7] remove different PHY fixups
Date: Mon, 29 Mar 2021 08:44:59 +0800 [thread overview]
Message-ID: <20210329004458.GD22955@dragon> (raw)
In-Reply-To: <20210324055424.u4mbdewg4stndzgh@pengutronix.de>
On Wed, Mar 24, 2021 at 06:54:24AM +0100, Oleksij Rempel wrote:
> Hi Shawn,
>
> ping, do this patches need some ACK from some one?
As this will break existing DTBs, I need more ACKs from people to see
the consensus that this is the right thing to do.
Shawn
>
> Regards,
> Oleksij
>
> On Tue, Mar 09, 2021 at 12:26:08PM +0100, Oleksij Rempel wrote:
> > changes v2:
> > - rebase against latest kernel
> > - fix networking on RIoTBoard
> >
> > This patch series tries to remove most of the imx6 and imx7 board
> > specific PHY configuration via fixup, as this breaks the PHYs when
> > connected to switch chips or USB Ethernet MACs.
> >
> > Each patch has the possibility to break boards, but contains a
> > recommendation to fix the problem in a more portable and future-proof
> > way.
> >
> > regards,
> > Oleksij
> >
> > Oleksij Rempel (7):
> > ARM: imx6q: remove PHY fixup for KSZ9031
> > ARM: imx6q: remove TX clock delay of ar8031_phy_fixup()
> > ARM: imx6q: remove hand crafted PHY power up in ar8035_phy_fixup()
> > ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035
> > PHYs
> > ARM: imx6q: remove Atheros AR8035 SmartEEE fixup
> > ARM: imx6sx: remove Atheros AR8031 PHY fixup
> > ARM: imx7d: remove Atheros AR8031 PHY fixup
> >
> > arch/arm/boot/dts/imx6dl-riotboard.dts | 2 +
> > arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +-
> > arch/arm/mach-imx/mach-imx6q.c | 85 -------------------------
> > arch/arm/mach-imx/mach-imx6sx.c | 26 --------
> > arch/arm/mach-imx/mach-imx7d.c | 22 -------
> > 5 files changed, 3 insertions(+), 134 deletions(-)
> >
> > --
> > 2.29.2
> >
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
kernel@pengutronix.de, netdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
Fabio Estevam <festevam@gmail.com>,
David Jander <david@protonic.nl>,
Russell King <linux@armlinux.org.uk>,
Philippe Schenker <philippe.schenker@toradex.com>
Subject: Re: [PATCH v2 0/7] remove different PHY fixups
Date: Mon, 29 Mar 2021 08:44:59 +0800 [thread overview]
Message-ID: <20210329004458.GD22955@dragon> (raw)
In-Reply-To: <20210324055424.u4mbdewg4stndzgh@pengutronix.de>
On Wed, Mar 24, 2021 at 06:54:24AM +0100, Oleksij Rempel wrote:
> Hi Shawn,
>
> ping, do this patches need some ACK from some one?
As this will break existing DTBs, I need more ACKs from people to see
the consensus that this is the right thing to do.
Shawn
>
> Regards,
> Oleksij
>
> On Tue, Mar 09, 2021 at 12:26:08PM +0100, Oleksij Rempel wrote:
> > changes v2:
> > - rebase against latest kernel
> > - fix networking on RIoTBoard
> >
> > This patch series tries to remove most of the imx6 and imx7 board
> > specific PHY configuration via fixup, as this breaks the PHYs when
> > connected to switch chips or USB Ethernet MACs.
> >
> > Each patch has the possibility to break boards, but contains a
> > recommendation to fix the problem in a more portable and future-proof
> > way.
> >
> > regards,
> > Oleksij
> >
> > Oleksij Rempel (7):
> > ARM: imx6q: remove PHY fixup for KSZ9031
> > ARM: imx6q: remove TX clock delay of ar8031_phy_fixup()
> > ARM: imx6q: remove hand crafted PHY power up in ar8035_phy_fixup()
> > ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035
> > PHYs
> > ARM: imx6q: remove Atheros AR8035 SmartEEE fixup
> > ARM: imx6sx: remove Atheros AR8031 PHY fixup
> > ARM: imx7d: remove Atheros AR8031 PHY fixup
> >
> > arch/arm/boot/dts/imx6dl-riotboard.dts | 2 +
> > arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +-
> > arch/arm/mach-imx/mach-imx6q.c | 85 -------------------------
> > arch/arm/mach-imx/mach-imx6sx.c | 26 --------
> > arch/arm/mach-imx/mach-imx7d.c | 22 -------
> > 5 files changed, 3 insertions(+), 134 deletions(-)
> >
> > --
> > 2.29.2
> >
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2021-03-29 18:52 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-09 11:26 [PATCH v2 0/7] remove different PHY fixups Oleksij Rempel
2021-03-09 11:26 ` Oleksij Rempel
2021-03-09 11:26 ` [PATCH v2 1/7] ARM: imx6q: remove PHY fixup for KSZ9031 Oleksij Rempel
2021-03-09 11:26 ` Oleksij Rempel
2021-05-11 1:49 ` Shawn Guo
2021-05-11 1:49 ` Shawn Guo
2021-03-09 11:26 ` [PATCH v2 2/7] ARM: imx6q: remove TX clock delay of ar8031_phy_fixup() Oleksij Rempel
2021-03-09 11:26 ` Oleksij Rempel
2021-03-09 11:26 ` [PATCH v2 3/7] ARM: imx6q: remove hand crafted PHY power up in ar8035_phy_fixup() Oleksij Rempel
2021-03-09 11:26 ` Oleksij Rempel
2021-03-09 11:26 ` [PATCH v2 4/7] ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs Oleksij Rempel
2021-03-09 11:26 ` Oleksij Rempel
2021-03-09 11:26 ` [PATCH v2 5/7] ARM: imx6q: remove Atheros AR8035 SmartEEE fixup Oleksij Rempel
2021-03-09 11:26 ` Oleksij Rempel
2021-03-09 11:26 ` [PATCH v2 6/7] ARM: imx6sx: remove Atheros AR8031 PHY fixup Oleksij Rempel
2021-03-09 11:26 ` Oleksij Rempel
2021-03-09 11:26 ` [PATCH v2 7/7] ARM: imx7d: " Oleksij Rempel
2021-03-09 11:26 ` Oleksij Rempel
2021-03-24 5:54 ` [PATCH v2 0/7] remove different PHY fixups Oleksij Rempel
2021-03-24 5:54 ` Oleksij Rempel
2021-03-29 0:44 ` Shawn Guo [this message]
2021-03-29 0:44 ` Shawn Guo
2021-03-29 8:13 ` Oleksij Rempel
2021-03-29 8:13 ` Oleksij Rempel
2021-03-30 14:00 ` Fabio Estevam
2021-03-30 14:00 ` Fabio Estevam
2021-03-30 14:30 ` Andrew Lunn
2021-03-30 14:30 ` Andrew Lunn
2021-03-30 15:04 ` Fabio Estevam
2021-03-30 15:04 ` Fabio Estevam
2021-04-13 9:43 ` Oleksij Rempel
2021-04-13 9:43 ` Oleksij Rempel
2021-04-13 10:00 ` Lucas Stach
2021-04-13 10:00 ` Lucas Stach
2021-04-13 10:51 ` Russell King - ARM Linux admin
2021-04-13 10:51 ` Russell King - ARM Linux admin
2021-04-13 11:10 ` Lucas Stach
2021-04-13 11:10 ` Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210329004458.GD22955@dragon \
--to=shawnguo@kernel.org \
--cc=andrew@lunn.ch \
--cc=david@protonic.nl \
--cc=f.fainelli@gmail.com \
--cc=festevam@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=philippe.schenker@toradex.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.