From: "Lisovskiy, Stanislav" <stanislav.lisovskiy@intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: igt-dev@lists.freedesktop.org
Subject: Re: [igt-dev] [PATCH i-g-t 7/8] tools/intel_watermark: Handle ADL-P dedicated SAGV watermarks
Date: Fri, 14 May 2021 12:51:22 +0300 [thread overview]
Message-ID: <20210514095122.GB8652@intel.com> (raw)
In-Reply-To: <20210414022754.31710-8-ville.syrjala@linux.intel.com>
On Wed, Apr 14, 2021 at 05:27:53AM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> ADL-P introduces dedicated SAGV watermark registers. Decode them.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@gmail.com>
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> tools/intel_watermark.c | 106 ++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 102 insertions(+), 4 deletions(-)
>
> diff --git a/tools/intel_watermark.c b/tools/intel_watermark.c
> index 31ce165f282b..f5613c333dc3 100644
> --- a/tools/intel_watermark.c
> +++ b/tools/intel_watermark.c
> @@ -166,6 +166,19 @@ static int skl_max_planes(uint32_t d)
> return 4;
> }
>
> +static bool skl_has_sagv_wm(uint32_t d)
> +{
> + return intel_gen(d) >= 13;
> +}
> +
> +static int skl_num_wm_levels(uint32_t d)
> +{
> + if (skl_has_sagv_wm(d))
> + return 6;
> + else
> + return 8;
> +}
> +
> static const char *skl_plane_name(int plane)
> {
> static char name[32];
> @@ -223,6 +236,30 @@ static const char *skl_wm_trans_reg_name(int plane)
> return reg_name;
> }
>
> +static const char *skl_wm_sagv_reg_name(int plane)
> +{
> + static char reg_name[32];
> +
> + if (plane == 0)
> + snprintf(reg_name, sizeof(reg_name), "CUR_WM_SAGV");
> + else
> + snprintf(reg_name, sizeof(reg_name), "PLANE_WM_SAGV_%1d", plane);
> +
> + return reg_name;
> +}
> +
> +static const char *skl_wm_sagv_trans_reg_name(int plane)
> +{
> + static char reg_name[32];
> +
> + if (plane == 0)
> + snprintf(reg_name, sizeof(reg_name), "CUR_WM_SAGV_TRANS");
> + else
> + snprintf(reg_name, sizeof(reg_name), "PLANE_WM_SAGV_TRANS_%1d", plane);
> +
> + return reg_name;
> +}
> +
> static const char *skl_buf_cfg_reg_name(int plane)
> {
> static char reg_name[32];
> @@ -266,10 +303,12 @@ static void skl_wm_dump(void)
> int pipe, plane, level;
> int num_pipes = skl_num_pipes(devid);
> int max_planes = skl_max_planes(devid);
> - int num_levels = 8;
> + int num_levels = skl_num_wm_levels(devid);
> uint32_t base_addr = 0x70000, addr, wm_offset;
> uint32_t wm[num_levels][num_pipes][max_planes];
> uint32_t wm_trans[num_pipes][max_planes];
> + uint32_t wm_sagv[num_pipes][max_planes];
> + uint32_t wm_sagv_trans[num_pipes][max_planes];
> uint32_t buf_cfg[num_pipes][max_planes];
> uint32_t nv12_buf_cfg[num_pipes][max_planes];
> uint32_t plane_ctl[num_pipes][max_planes];
> @@ -297,6 +336,11 @@ static void skl_wm_dump(void)
> wm_offset = addr + 0x00140 + level * 0x4;
> wm[level][pipe][plane] = read_reg(wm_offset);
> }
> +
> + if (skl_has_sagv_wm(devid)) {
> + wm_sagv[pipe][plane] = read_reg(addr + 0x00158);
> + wm_sagv_trans[pipe][plane] = read_reg(addr + 0x0015c);
> + }
> }
> }
>
> @@ -348,6 +392,32 @@ static void skl_wm_dump(void)
> }
> printf("\n");
>
> + if (skl_has_sagv_wm(devid)) {
> + for (plane = 0; plane < max_planes; plane++) {
> + printf("%21s\t", skl_wm_sagv_reg_name(plane));
> +
> + for (pipe = 0; pipe < num_pipes; pipe++) {
> + if (plane >= skl_num_planes(devid, pipe))
> + break;
> + printf("0x%08x\t", wm_sagv[pipe][plane]);
> + }
> + printf("\n");
> + }
> + printf("\n");
> +
> + for (plane = 0; plane < max_planes; plane++) {
> + printf("%21s\t", skl_wm_sagv_trans_reg_name(plane));
> +
> + for (pipe = 0; pipe < num_pipes; pipe++) {
> + if (plane >= skl_num_planes(devid, pipe))
> + break;
> + printf("0x%08x\t", wm_sagv_trans[pipe][plane]);
> + }
> + printf("\n");
> + }
> + printf("\n");
> + }
> +
> for (plane = 0; plane < max_planes; plane++) {
> printf("%21s\t", skl_buf_cfg_reg_name(plane));
>
> @@ -386,7 +456,7 @@ static void skl_wm_dump(void)
> linetime = REG_DECODE1(wm_linetime[pipe], 0, 9);
> printf("LINETIME: %d (%.3f usec)\n", linetime, linetime* 0.125f);
>
> - printf("LEVEL");
> + printf(" LEVEL");
> for (plane = 0; plane < num_planes; plane++) {
> if (plane == 0)
> enable = REG_DECODE1(plane_ctl[pipe][plane], 0, 3) ||
> @@ -399,7 +469,7 @@ static void skl_wm_dump(void)
> printf("\n");
>
> for (level = 0; level < num_levels; level++) {
> - printf("%5d", level);
> + printf("%10d", level);
> for (plane = 0; plane < num_planes; plane++) {
> blocks = REG_DECODE1(wm[level][pipe][plane], 0, 11);
> lines = REG_DECODE1(wm[level][pipe][plane], 14, 5);
> @@ -414,7 +484,7 @@ static void skl_wm_dump(void)
> printf("\n");
> }
>
> - printf("TRANS");
> + printf(" TRANS");
> for (plane = 0; plane < num_planes; plane++) {
> blocks = REG_DECODE1(wm_trans[pipe][plane], 0, 11);
> lines = REG_DECODE1(wm_trans[pipe][plane], 14, 5);
> @@ -427,6 +497,34 @@ static void skl_wm_dump(void)
> printf("(--)");
> }
>
> + if (skl_has_sagv_wm(devid)) {
> + printf("\n SAGV");
> + for (plane = 0; plane < num_planes; plane++) {
> + blocks = REG_DECODE1(wm_sagv[pipe][plane], 0, 11);
> + lines = REG_DECODE1(wm_sagv[pipe][plane], 14, 5);
> + enable = REG_DECODE1(wm_sagv[pipe][plane], 31, 1);
> +
> + printf("%5d%c", blocks, endis_ast(enable));
> + if (!REG_DECODE1(wm_sagv[pipe][plane], 30, 1))
> + printf("(%2d)", lines);
> + else
> + printf("(--)");
> + }
> +
> + printf("\nSAGV TRANS");
> + for (plane = 0; plane < num_planes; plane++) {
> + blocks = REG_DECODE1(wm_sagv_trans[pipe][plane], 0, 11);
> + lines = REG_DECODE1(wm_sagv_trans[pipe][plane], 14, 5);
> + enable = REG_DECODE1(wm_sagv_trans[pipe][plane], 31, 1);
> +
> + printf("%5d%c", blocks, endis_ast(enable));
> + if (!REG_DECODE1(wm_sagv_trans[pipe][plane], 30, 1))
> + printf("(%2d)", lines);
> + else
> + printf("(--)");
> + }
> + }
> +
> printf("\nDDB allocation:");
>
> printf("\nstart");
> --
> 2.26.3
>
> _______________________________________________
> igt-dev mailing list
> igt-dev@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/igt-dev
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2021-05-14 9:48 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-14 2:27 [igt-dev] [PATCH i-g-t 0/8] tools/intel_watermark: Support new platofrms Ville Syrjala
2021-04-14 2:27 ` [igt-dev] [PATCH i-g-t 1/8] tools/intel_watermark: Parse WM_DBG to help diagnose watermark issues Ville Syrjala
2021-05-14 9:31 ` Lisovskiy, Stanislav
2021-04-14 2:27 ` [igt-dev] [PATCH i-g-t 2/8] tools/intel_watermark: Use WM_SR_CNT to observe SR residency Ville Syrjala
2021-05-14 9:36 ` Lisovskiy, Stanislav
2021-04-14 2:27 ` [igt-dev] [PATCH i-g-t 3/8] tools/intel_watermark: Deal with TGL planes Ville Syrjala
2021-05-14 9:47 ` Lisovskiy, Stanislav
2021-04-14 2:27 ` [igt-dev] [PATCH i-g-t 4/8] tools/intel_watermark: Reduce the number of planes for rkl/adls/adlp Ville Syrjala
2021-05-14 9:53 ` Lisovskiy, Stanislav
2021-04-14 2:27 ` [igt-dev] [PATCH i-g-t 5/8] tools/intel_watermark: TGL+ can have 4 pipes Ville Syrjala
2021-05-14 9:53 ` Lisovskiy, Stanislav
2021-04-14 2:27 ` [igt-dev] [PATCH i-g-t 6/8] tools/intel_watermark: Make reg dump section less wide Ville Syrjala
2021-05-14 9:50 ` Lisovskiy, Stanislav
2021-04-14 2:27 ` [igt-dev] [PATCH i-g-t 7/8] tools/intel_watermark: Handle ADL-P dedicated SAGV watermarks Ville Syrjala
2021-05-14 9:51 ` Lisovskiy, Stanislav [this message]
2021-04-14 2:27 ` [igt-dev] [PATCH i-g-t 8/8] tools/intel_watermark: Widen register bitfields Ville Syrjala
2021-05-14 9:51 ` Lisovskiy, Stanislav
2021-04-14 3:04 ` [igt-dev] ✓ Fi.CI.BAT: success for tools/intel_watermark: Support new platofrms Patchwork
2021-04-14 4:01 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210514095122.GB8652@intel.com \
--to=stanislav.lisovskiy@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.