From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, kishon@ti.com, vkoul@kernel.org,
t.schramm@manjaro.org, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 0/5] convert grf.txt to YAML
Date: Tue, 1 Jun 2021 18:47:55 +0200 [thread overview]
Message-ID: <20210601164800.7670-1-jbx6244@gmail.com> (raw)
Changed V7:
rebase
add compatible for rk3308 USB grf
add "rockchip,rk3308-usb2phy-grf" to "usb2phy@[0-9a-f]+$"
patternProperties too
add USB support to rk3308.dtsi
restyle
limit grf reg size
change sub nodename
remove applied patches
Changed V6:
remove some #phy-cells in rockchip-usb-phy.yaml
rename nodename for phy-rockchip-inno-usb2
remove applied patches
Changed V5:
changed compatibles for rk3066/rk3188
add rockchip-usb-phy.yaml
move and restyle grf nodes rk3066/rk3188
remove applied patches
Changed V4:
revert separate schemas for each 'if' subset
add additionalProperties
move properties to top level
Changed V3:
remove select
change unevaluatedProperties
add separate schemas for each 'if' subset
Changed V2:
add rockchip,rk3328-grf-gpio.yaml
rename grf-gpio nodename
Johan Jonker (3):
dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml
ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
Tobias Schramm (2):
dt-bindings: soc: rockchip: grf: add compatible for RK3308 USB grf
arm64: dts: rockchip: add USB support to rk3308.dtsi
.../bindings/phy/phy-rockchip-inno-usb2.yaml | 11 +---
.../devicetree/bindings/soc/rockchip/grf.yaml | 6 +-
arch/arm/boot/dts/rk322x.dtsi | 4 +-
arch/arm/boot/dts/rv1108.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 74 +++++++++++++++++++++-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 +-
8 files changed, 87 insertions(+), 18 deletions(-)
--
2.11.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, kishon@ti.com, vkoul@kernel.org,
t.schramm@manjaro.org, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 0/5] convert grf.txt to YAML
Date: Tue, 1 Jun 2021 18:47:55 +0200 [thread overview]
Message-ID: <20210601164800.7670-1-jbx6244@gmail.com> (raw)
Changed V7:
rebase
add compatible for rk3308 USB grf
add "rockchip,rk3308-usb2phy-grf" to "usb2phy@[0-9a-f]+$"
patternProperties too
add USB support to rk3308.dtsi
restyle
limit grf reg size
change sub nodename
remove applied patches
Changed V6:
remove some #phy-cells in rockchip-usb-phy.yaml
rename nodename for phy-rockchip-inno-usb2
remove applied patches
Changed V5:
changed compatibles for rk3066/rk3188
add rockchip-usb-phy.yaml
move and restyle grf nodes rk3066/rk3188
remove applied patches
Changed V4:
revert separate schemas for each 'if' subset
add additionalProperties
move properties to top level
Changed V3:
remove select
change unevaluatedProperties
add separate schemas for each 'if' subset
Changed V2:
add rockchip,rk3328-grf-gpio.yaml
rename grf-gpio nodename
Johan Jonker (3):
dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml
ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
Tobias Schramm (2):
dt-bindings: soc: rockchip: grf: add compatible for RK3308 USB grf
arm64: dts: rockchip: add USB support to rk3308.dtsi
.../bindings/phy/phy-rockchip-inno-usb2.yaml | 11 +---
.../devicetree/bindings/soc/rockchip/grf.yaml | 6 +-
arch/arm/boot/dts/rk322x.dtsi | 4 +-
arch/arm/boot/dts/rv1108.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 74 +++++++++++++++++++++-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 +-
8 files changed, 87 insertions(+), 18 deletions(-)
--
2.11.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, kishon@ti.com, vkoul@kernel.org,
t.schramm@manjaro.org, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 0/5] convert grf.txt to YAML
Date: Tue, 1 Jun 2021 18:47:55 +0200 [thread overview]
Message-ID: <20210601164800.7670-1-jbx6244@gmail.com> (raw)
Changed V7:
rebase
add compatible for rk3308 USB grf
add "rockchip,rk3308-usb2phy-grf" to "usb2phy@[0-9a-f]+$"
patternProperties too
add USB support to rk3308.dtsi
restyle
limit grf reg size
change sub nodename
remove applied patches
Changed V6:
remove some #phy-cells in rockchip-usb-phy.yaml
rename nodename for phy-rockchip-inno-usb2
remove applied patches
Changed V5:
changed compatibles for rk3066/rk3188
add rockchip-usb-phy.yaml
move and restyle grf nodes rk3066/rk3188
remove applied patches
Changed V4:
revert separate schemas for each 'if' subset
add additionalProperties
move properties to top level
Changed V3:
remove select
change unevaluatedProperties
add separate schemas for each 'if' subset
Changed V2:
add rockchip,rk3328-grf-gpio.yaml
rename grf-gpio nodename
Johan Jonker (3):
dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml
ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
Tobias Schramm (2):
dt-bindings: soc: rockchip: grf: add compatible for RK3308 USB grf
arm64: dts: rockchip: add USB support to rk3308.dtsi
.../bindings/phy/phy-rockchip-inno-usb2.yaml | 11 +---
.../devicetree/bindings/soc/rockchip/grf.yaml | 6 +-
arch/arm/boot/dts/rk322x.dtsi | 4 +-
arch/arm/boot/dts/rv1108.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 74 +++++++++++++++++++++-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 +-
8 files changed, 87 insertions(+), 18 deletions(-)
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, kishon@ti.com, vkoul@kernel.org,
t.schramm@manjaro.org, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 0/5] convert grf.txt to YAML
Date: Tue, 1 Jun 2021 18:47:55 +0200 [thread overview]
Message-ID: <20210601164800.7670-1-jbx6244@gmail.com> (raw)
Changed V7:
rebase
add compatible for rk3308 USB grf
add "rockchip,rk3308-usb2phy-grf" to "usb2phy@[0-9a-f]+$"
patternProperties too
add USB support to rk3308.dtsi
restyle
limit grf reg size
change sub nodename
remove applied patches
Changed V6:
remove some #phy-cells in rockchip-usb-phy.yaml
rename nodename for phy-rockchip-inno-usb2
remove applied patches
Changed V5:
changed compatibles for rk3066/rk3188
add rockchip-usb-phy.yaml
move and restyle grf nodes rk3066/rk3188
remove applied patches
Changed V4:
revert separate schemas for each 'if' subset
add additionalProperties
move properties to top level
Changed V3:
remove select
change unevaluatedProperties
add separate schemas for each 'if' subset
Changed V2:
add rockchip,rk3328-grf-gpio.yaml
rename grf-gpio nodename
Johan Jonker (3):
dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml
ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
Tobias Schramm (2):
dt-bindings: soc: rockchip: grf: add compatible for RK3308 USB grf
arm64: dts: rockchip: add USB support to rk3308.dtsi
.../bindings/phy/phy-rockchip-inno-usb2.yaml | 11 +---
.../devicetree/bindings/soc/rockchip/grf.yaml | 6 +-
arch/arm/boot/dts/rk322x.dtsi | 4 +-
arch/arm/boot/dts/rv1108.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 74 +++++++++++++++++++++-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 +-
8 files changed, 87 insertions(+), 18 deletions(-)
--
2.11.0
next reply other threads:[~2021-06-01 16:48 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-01 16:47 Johan Jonker [this message]
2021-06-01 16:47 ` [PATCH v7 0/5] convert grf.txt to YAML Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` [PATCH v7 1/5] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-03 5:54 ` Vinod Koul
2021-06-03 5:54 ` Vinod Koul
2021-06-03 5:54 ` Vinod Koul
2021-06-03 5:54 ` Vinod Koul
2021-06-03 8:58 ` Heiko Stübner
2021-06-03 8:58 ` Heiko Stübner
2021-06-03 8:58 ` Heiko Stübner
2021-06-03 8:58 ` Heiko Stübner
2021-06-07 13:16 ` Rob Herring
2021-06-07 13:16 ` Rob Herring
2021-06-07 13:16 ` Rob Herring
2021-06-07 13:16 ` Rob Herring
2021-06-07 13:38 ` Johan Jonker
2021-06-07 13:38 ` Johan Jonker
2021-06-07 13:38 ` Johan Jonker
2021-06-07 13:38 ` Johan Jonker
2021-06-07 14:18 ` [PATCH] dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml Heiko Stuebner
2021-06-07 14:18 ` Heiko Stuebner
2021-06-07 14:18 ` Heiko Stuebner
2021-06-07 14:18 ` Heiko Stuebner
2021-06-07 15:37 ` Johan Jonker
2021-06-07 15:37 ` Johan Jonker
2021-06-07 15:37 ` Johan Jonker
2021-06-07 15:37 ` Johan Jonker
2021-06-10 7:30 ` Heiko Stübner
2021-06-10 7:30 ` Heiko Stübner
2021-06-10 7:30 ` Heiko Stübner
2021-06-10 7:30 ` Heiko Stübner
2021-06-01 16:47 ` [PATCH v7 2/5] dt-bindings: soc: rockchip: grf: add compatible for RK3308 USB grf Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-02 18:17 ` Rob Herring
2021-06-02 18:17 ` Rob Herring
2021-06-02 18:17 ` Rob Herring
2021-06-02 18:17 ` Rob Herring
2021-06-01 16:47 ` [PATCH v7 3/5] ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2 Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` [PATCH v7 4/5] arm64: " Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:47 ` Johan Jonker
2021-06-01 16:48 ` [PATCH v7 5/5] arm64: dts: rockchip: add USB support to rk3308.dtsi Johan Jonker
2021-06-01 16:48 ` Johan Jonker
2021-06-01 16:48 ` Johan Jonker
2021-06-01 16:48 ` Johan Jonker
2021-06-03 9:56 ` [PATCH v7 0/5] convert grf.txt to YAML Heiko Stuebner
2021-06-03 9:56 ` Heiko Stuebner
2021-06-03 9:56 ` Heiko Stuebner
2021-06-03 9:56 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210601164800.7670-1-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=t.schramm@manjaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.