Re: [PATCH v7 1/5] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml

[Johan Jonker <jbx6244@gmail.com>]

On 6/7/21 3:16 PM, Rob Herring wrote:
> On Thu, Jun 3, 2021 at 3:58 AM Heiko Stübner <heiko@sntech.de> wrote:
>>
>> Hi Vinod,
>>
>> Am Donnerstag, 3. Juni 2021, 07:54:24 CEST schrieb Vinod Koul:
>>> On 01-06-21, 18:47, Johan Jonker wrote:
>>>> The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
>>>> in phy-provider.yaml has required "#phy-cells" for phy nodes.
>>>> The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
>>>> Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
>>>> notifications. Remove unneeded "#phy-cells" from parent node.
>>>> Also sort example.
>>>>
>>>> make ARCH=arm dtbs_check
>>>> DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
>>>> phy/phy-provider.yaml
>>>>
>>>> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
>>>> Acked-by: Rob Herring <robh@kernel.org>
>>>> ---
>>>>  .../devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml       | 11 +++--------
>>>>  Documentation/devicetree/bindings/soc/rockchip/grf.yaml       |  4 ++--
>>>
>>> I dont have grf.yaml, I guess it would be easier to split this into two
>>> or apply this thru rockchip tree. If you prefer latter:
>>>
>>> Acked-By: Vinod Koul <vkoul@kernel.org>
>>
>> before we do any more rounds, I'll just do that with your Ack, thanks :-)
> 
> This is generating warnings on linux-next now:
> 
> /builds/robherring/linux-dt/Documentation/devicetree/bindings/soc/rockchip/grf.example.dt.yaml:
> syscon@ff770000: usb2phy@e450: '#phy-cells' does not match any of the
> regexes: 'pinctrl-[0-9]+'
> From schema: /builds/robherring/linux-dt/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
> /builds/robherring/linux-dt/Documentation/devicetree/bindings/soc/rockchip/grf.example.dt.yaml:
> usb2phy@e450: '#phy-cells' does not match any of the regexes:
> 'pinctrl-[0-9]+'
> From schema: /builds/robherring/linux-dt/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
> 
> Rob
> 

Hi Rob, Heiko,

Sorry...
That '#phy-cells' in the grf.yaml example also needs to go.

Is that something Heiko can fix in his git tree or
do I have to resubmit the complete patch or just a fix?
Please advise.

Kind regards,

Johan

===
> 
> examples:
>   - |
>     #include <dt-bindings/clock/rk3399-cru.h>
>     #include <dt-bindings/interrupt-controller/arm-gic.h>
>     #include <dt-bindings/power/rk3399-power.h>
>     grf: syscon@ff770000 {
>       compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
>       reg = <0xff770000 0x10000>;
>       #address-cells = <1>;
>       #size-cells = <1>;
> 
>       mipi_dphy_rx0: mipi-dphy-rx0 {
>         compatible = "rockchip,rk3399-mipi-dphy-rx0";
>         clocks = <&cru SCLK_MIPIDPHY_REF>,
>                  <&cru SCLK_DPHY_RX0_CFG>,
>                  <&cru PCLK_VIO_GRF>;
>         clock-names = "dphy-ref", "dphy-cfg", "grf";
>         power-domains = <&power RK3399_PD_VIO>;
>         #phy-cells = <0>;
>       };
> 
>       u2phy0: usb2phy@e450 {
>         compatible = "rockchip,rk3399-usb2phy";
>         reg = <0xe450 0x10>;
>         clocks = <&cru SCLK_USB2PHY0_REF>;
>         clock-names = "phyclk";
>         #clock-cells = <0>;
>         clock-output-names = "clk_usbphy0_480m";

>         #phy-cells = <0>;

Remove

> 
>         u2phy0_host: host-port {
>           #phy-cells = <0>;
>           interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
>           interrupt-names = "linestate";
>          };
> 
>         u2phy0_otg: otg-port {
>           #phy-cells = <0>;
>           interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
>                        <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
>                        <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
>           interrupt-names = "otg-bvalid", "otg-id",
>                             "linestate";
>         };
>       };
>     };




-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy