[PATCH 2/3] dt-bindings: i2c-new: Add bindings for AST2600 I2C

[Jamin Lin <jamin_lin@aspeedtech.com>]

AST2600 support the new register set of I2C controller
Add bindings document to support the new driver of I2C

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 .../bindings/i2c/aspeed,new-i2c.yaml          | 107 ++++++++++++++++++
 1 file changed, 107 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/aspeed,new-i2c.yaml

diff --git a/Documentation/devicetree/bindings/i2c/aspeed,new-i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,new-i2c.yaml
new file mode 100644
index 000000000000..2c264596b138
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/aspeed,new-i2c.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/aspeed,new-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED I2C on the AST26XX SoCs Device Tree Bindings
+
+description: |
+  ASPEED I2C controller support the new register set since AST26XX
+  The i2c-global-regs device is used to enable new register set
+
+maintainers:
+  - Ryan Chen <ryan_chen@aspeedtech.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - aspeed,ast2600-i2c-bus
+      - items:
+          - enum:
+              - aspeed,ast2600-i2c-global
+          - const: syscon
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: address offset and range of bus
+      - description: address offset and range of bus buffer
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      root clock of bus, should reference the APB
+      clock in the second cell
+
+  resets:
+    maxItems: 1
+
+  bus-frequency:
+    minimum: 100
+    maximum: 5000000
+    default: 100000
+    description: frequency of the bus clock in Hz defaults to 100 kHz when not
+      specified
+
+  multi-master:
+    type: boolean
+    description:
+      states that there is another master active on this bus
+
+  buff-mode:
+    type: boolean
+    description:
+      buffer mode data transfer
+
+  byte-mode:
+    type: boolean
+    description:
+      byte mode tata transfer
+
+  smbus-alert:
+    type: boolean
+    description:
+      smbus alert protocol
+
+required:
+  - reg
+  - compatible
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+
+    i2c_gr: i2c-global-regs at 0 {
+      compatible = "aspeed,ast2600-i2c-global", "syscon";
+      reg = <0x0 0x20>;
+      clocks = <&syscon ASPEED_CLK_APB2>;
+      resets = <&syscon ASPEED_RESET_I2C>;
+    };
+
+    i2c0: i2c-bus at 80 {
+      compatible = "aspeed,ast2600-i2c-bus";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #interrupt-cells = <1>;
+      reg = <0x80 0x80>, <0xC00 0x20>;
+      clocks = <&syscon ASPEED_CLK_APB2>;
+      resets = <&syscon ASPEED_RESET_I2C>;
+      interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+      bus-frequency = <100000>;
+    };
-- 
2.17.1