From: Maxime Ripard <maxime@cerno.tech>
To: Daniel Vetter <daniel.vetter@intel.com>,
David Airlie <airlied@linux.ie>,
dri-devel@lists.freedesktop.org,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maxime Ripard <maxime@cerno.tech>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>,
Dom Cobley <dom@raspberrypi.com>,
Tim Gover <tim.gover@raspberrypi.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
linux-kernel@vger.kernel.org, Eric Anholt <eric@anholt.net>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
Emma Anholt <emma@anholt.net>, Phil Elwell <phil@raspberrypi.com>
Subject: [PATCH v5 00/10] drm/vc4: hdmi: Support the 4k @ 60Hz modes
Date: Mon, 28 Jun 2021 14:42:47 +0200 [thread overview]
Message-ID: <20210628124257.140453-1-maxime@cerno.tech> (raw)
Hi,
Here is a series that enables the higher resolutions on the HDMI0 Controller
found in the BCM2711 (RPi4).
In order to work it needs a few adjustments to config.txt, most notably to
enable the enable_hdmi_4kp60 option.
Let me know what you think,
Maxime
---
Changes from v4:
- Removed the patches already applied
- Added various fixes for the issues that have been discovered on the
downstream tree
Changes from v3:
- Rework the encoder retrieval code that was broken on the RPi3 and older
- Fix a scrambling enabling issue on some display
Changes from v2:
- Gathered the various tags
- Added Cc stable when relevant
- Split out the check to test whether the scrambler is required into
an helper
- Fixed a bug where the scrambler state wouldn't be tracked properly
if it was enabled at boot
Changes from v1:
- Dropped the range accessors
- Drop the mention of force_turbo
- Reordered the SCRAMBLER_CTL register to match the offset
- Removed duplicate HDMI_14_MAX_TMDS_CLK define
- Warn about enable_hdmi_4kp60 only if there's some modes that can't be reached
- Rework the BVB clock computation
Maxime Ripard (10):
drm/vc4: hdmi: Remove the DDC probing for status detection
drm/vc4: hdmi: Fix HPD GPIO detection
drm/vc4: Make vc4_crtc_get_encoder public
drm/vc4: crtc: Add encoder to vc4_crtc_config_pv prototype
drm/vc4: crtc: Rework the encoder retrieval code (again)
drm/vc4: crtc: Add some logging
drm/vc4: Leverage the load tracker on the BCM2711
drm/vc4: hdmi: Raise the maximum clock rate
drm/vc4: hdmi: Enable the scrambler on reconnection
drm/vc4: Increase the core clock based on HVS load
drivers/gpu/drm/vc4/vc4_crtc.c | 60 ++++++++------
drivers/gpu/drm/vc4/vc4_debugfs.c | 7 +-
drivers/gpu/drm/vc4/vc4_drv.h | 9 ++-
drivers/gpu/drm/vc4/vc4_hdmi.c | 20 +++--
drivers/gpu/drm/vc4/vc4_kms.c | 126 +++++++++++++++++++++++++-----
drivers/gpu/drm/vc4/vc4_plane.c | 3 -
6 files changed, 164 insertions(+), 61 deletions(-)
--
2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech>
To: Daniel Vetter <daniel.vetter@intel.com>,
David Airlie <airlied@linux.ie>,
dri-devel@lists.freedesktop.org,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>,
Phil Elwell <phil@raspberrypi.com>,
Tim Gover <tim.gover@raspberrypi.com>,
Dom Cobley <dom@raspberrypi.com>,
linux-rpi-kernel@lists.infradead.org,
Maxime Ripard <mripard@kernel.org>, Emma Anholt <emma@anholt.net>,
bcm-kernel-feedback-list@broadcom.com,
Nicolas Saenz Julienne <nsaenz@kernel.org>,
Eric Anholt <eric@anholt.net>,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 00/10] drm/vc4: hdmi: Support the 4k @ 60Hz modes
Date: Mon, 28 Jun 2021 14:42:47 +0200 [thread overview]
Message-ID: <20210628124257.140453-1-maxime@cerno.tech> (raw)
Hi,
Here is a series that enables the higher resolutions on the HDMI0 Controller
found in the BCM2711 (RPi4).
In order to work it needs a few adjustments to config.txt, most notably to
enable the enable_hdmi_4kp60 option.
Let me know what you think,
Maxime
---
Changes from v4:
- Removed the patches already applied
- Added various fixes for the issues that have been discovered on the
downstream tree
Changes from v3:
- Rework the encoder retrieval code that was broken on the RPi3 and older
- Fix a scrambling enabling issue on some display
Changes from v2:
- Gathered the various tags
- Added Cc stable when relevant
- Split out the check to test whether the scrambler is required into
an helper
- Fixed a bug where the scrambler state wouldn't be tracked properly
if it was enabled at boot
Changes from v1:
- Dropped the range accessors
- Drop the mention of force_turbo
- Reordered the SCRAMBLER_CTL register to match the offset
- Removed duplicate HDMI_14_MAX_TMDS_CLK define
- Warn about enable_hdmi_4kp60 only if there's some modes that can't be reached
- Rework the BVB clock computation
Maxime Ripard (10):
drm/vc4: hdmi: Remove the DDC probing for status detection
drm/vc4: hdmi: Fix HPD GPIO detection
drm/vc4: Make vc4_crtc_get_encoder public
drm/vc4: crtc: Add encoder to vc4_crtc_config_pv prototype
drm/vc4: crtc: Rework the encoder retrieval code (again)
drm/vc4: crtc: Add some logging
drm/vc4: Leverage the load tracker on the BCM2711
drm/vc4: hdmi: Raise the maximum clock rate
drm/vc4: hdmi: Enable the scrambler on reconnection
drm/vc4: Increase the core clock based on HVS load
drivers/gpu/drm/vc4/vc4_crtc.c | 60 ++++++++------
drivers/gpu/drm/vc4/vc4_debugfs.c | 7 +-
drivers/gpu/drm/vc4/vc4_drv.h | 9 ++-
drivers/gpu/drm/vc4/vc4_hdmi.c | 20 +++--
drivers/gpu/drm/vc4/vc4_kms.c | 126 +++++++++++++++++++++++++-----
drivers/gpu/drm/vc4/vc4_plane.c | 3 -
6 files changed, 164 insertions(+), 61 deletions(-)
--
2.31.1
next reply other threads:[~2021-06-28 12:43 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-28 12:42 Maxime Ripard [this message]
2021-06-28 12:42 ` [PATCH v5 00/10] drm/vc4: hdmi: Support the 4k @ 60Hz modes Maxime Ripard
2021-06-28 12:42 ` [PATCH v5 01/10] drm/vc4: hdmi: Remove the DDC probing for status detection Maxime Ripard
2021-06-28 12:42 ` Maxime Ripard
2021-06-28 12:42 ` [PATCH v5 02/10] drm/vc4: hdmi: Fix HPD GPIO detection Maxime Ripard
2021-06-28 12:42 ` Maxime Ripard
2021-06-28 12:42 ` [PATCH v5 03/10] drm/vc4: Make vc4_crtc_get_encoder public Maxime Ripard
2021-06-28 12:42 ` Maxime Ripard
2021-06-28 12:42 ` [PATCH v5 04/10] drm/vc4: crtc: Add encoder to vc4_crtc_config_pv prototype Maxime Ripard
2021-06-28 12:42 ` Maxime Ripard
2021-06-28 12:42 ` [PATCH v5 05/10] drm/vc4: crtc: Rework the encoder retrieval code (again) Maxime Ripard
2021-06-28 12:42 ` Maxime Ripard
2021-06-28 12:42 ` [PATCH v5 06/10] drm/vc4: crtc: Add some logging Maxime Ripard
2021-06-28 12:42 ` Maxime Ripard
2021-06-28 12:42 ` [PATCH v5 07/10] drm/vc4: Leverage the load tracker on the BCM2711 Maxime Ripard
2021-06-28 12:42 ` Maxime Ripard
2021-06-28 17:01 ` kernel test robot
2021-06-28 17:01 ` kernel test robot
2021-06-28 20:42 ` kernel test robot
2021-06-28 20:42 ` kernel test robot
2021-06-28 12:42 ` [PATCH v5 08/10] drm/vc4: hdmi: Raise the maximum clock rate Maxime Ripard
2021-06-28 12:42 ` Maxime Ripard
2021-06-28 12:42 ` [PATCH v5 09/10] drm/vc4: hdmi: Enable the scrambler on reconnection Maxime Ripard
2021-06-28 12:42 ` Maxime Ripard
2021-06-28 12:42 ` [PATCH v5 10/10] drm/vc4: Increase the core clock based on HVS load Maxime Ripard
2021-06-28 12:42 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210628124257.140453-1-maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=airlied@linux.ie \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=daniel.vetter@intel.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dom@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=emma@anholt.net \
--cc=eric@anholt.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=nsaenz@kernel.org \
--cc=phil@raspberrypi.com \
--cc=tim.gover@raspberrypi.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.