From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Clark Wang <xiaoning.wang@nxp.com>
Cc: conor.culhane@silvaco.com, alexandre.belloni@bootlin.com,
linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-imx@nxp.com
Subject: Re: [PATCH V4 6/8] i3c: master: svc: add runtime pm support
Date: Mon, 16 Aug 2021 08:59:50 +0200 [thread overview]
Message-ID: <20210816085950.014401a7@xps13> (raw)
In-Reply-To: <20210809063645.2289988-7-xiaoning.wang@nxp.com>
Hi Clark,
Clark Wang <xiaoning.wang@nxp.com> wrote on Mon, 9 Aug 2021 14:36:43
+0800:
> Add runtime pm support to dynamically manage the clock.
>
> Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
> Reviewed-by: Jun Li <jun.li@nxp.com>
> ---
> V4:
> - error path emit_stop only used in svc_i3c_master_do_daa() for one time, so
> remove it. Or it needs another goto command at the end of the function to
> skip it and to go to rpm_out.
> V3:
> - restore the error path of probe function
> - enable runtime pm just before i3c module reset
> V2: New patch in V2.
> ---
> drivers/i3c/master/svc-i3c-master.c | 154 ++++++++++++++++++++++++----
> 1 file changed, 135 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
> index 2a96b217cc78..5939e0936697 100644
> --- a/drivers/i3c/master/svc-i3c-master.c
> +++ b/drivers/i3c/master/svc-i3c-master.c
> @@ -17,7 +17,9 @@
> #include <linux/list.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>
> /* Master Mode Registers */
> #define SVC_I3C_MCONFIG 0x000
> @@ -119,6 +121,7 @@
> #define SVC_MDYNADDR_ADDR(x) FIELD_PREP(GENMASK(7, 1), (x))
>
> #define SVC_I3C_MAX_DEVS 32
> +#define SVC_I3C_PM_TIMEOUT_MS 1000
>
> /* This parameter depends on the implementation and may be tuned */
> #define SVC_I3C_FIFO_SIZE 16
> @@ -480,10 +483,20 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
> u32 ppbaud, pplow, odhpp, odbaud, odstop, i2cbaud, reg;
> int ret;
>
> + ret = pm_runtime_resume_and_get(master->dev);
> + if (ret < 0) {
> + dev_err(master->dev,
> + "<%s> cannot resume i3c bus master, err: %d\n",
> + __func__, ret);
> + return ret;
> + }
> +
> /* Timings derivation */
> fclk_rate = clk_get_rate(master->fclk);
> - if (!fclk_rate)
> - return -EINVAL;
> + if (!fclk_rate) {
> + ret = -EINVAL;
> + goto rpm_out;
> + }
>
> fclk_period_ns = DIV_ROUND_UP(1000000000, fclk_rate);
>
> @@ -527,7 +540,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
> odstop = 1;
> break;
> default:
> - return -EINVAL;
> + goto rpm_out;
> }
>
> reg = SVC_I3C_MCONFIG_MASTER_EN |
> @@ -545,7 +558,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
> /* Master core's registration */
> ret = i3c_master_get_free_addr(m, 0);
> if (ret < 0)
> - return ret;
> + goto rpm_out;
>
> info.dyn_addr = ret;
>
> @@ -554,21 +567,35 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
>
> ret = i3c_master_set_info(&master->base, &info);
> if (ret)
> - return ret;
> + goto rpm_out;
>
> svc_i3c_master_enable_interrupts(master, SVC_I3C_MINT_SLVSTART);
>
> - return 0;
> +rpm_out:
> + pm_runtime_mark_last_busy(master->dev);
> + pm_runtime_put_autosuspend(master->dev);
> +
> + return ret;
> }
>
> static void svc_i3c_master_bus_cleanup(struct i3c_master_controller *m)
> {
> struct svc_i3c_master *master = to_svc_i3c_master(m);
> + int ret;
> +
> + ret = pm_runtime_resume_and_get(master->dev);
> + if (ret < 0) {
> + dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> + return;
> + }
>
> svc_i3c_master_disable_interrupts(master);
>
> /* Disable master */
> writel(0, master->regs + SVC_I3C_MCONFIG);
> +
> + pm_runtime_mark_last_busy(master->dev);
> + pm_runtime_put_autosuspend(master->dev);
> }
>
> static int svc_i3c_master_reserve_slot(struct svc_i3c_master *master)
> @@ -867,31 +894,36 @@ static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
> unsigned int dev_nb;
> int ret, i;
>
> + ret = pm_runtime_resume_and_get(master->dev);
> + if (ret < 0) {
> + dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> + return ret;
> + }
> +
> spin_lock_irqsave(&master->xferqueue.lock, flags);
> ret = svc_i3c_master_do_daa_locked(master, addrs, &dev_nb);
> spin_unlock_irqrestore(&master->xferqueue.lock, flags);
> - if (ret)
> - goto emit_stop;
> + if (ret) {
> + svc_i3c_master_emit_stop(master);
> + svc_i3c_master_clear_merrwarn(master);
> + goto rpm_out;
> + }
>
> /* Register all devices who participated to the core */
> for (i = 0; i < dev_nb; i++) {
> ret = i3c_master_add_i3c_dev_locked(m, addrs[i]);
> if (ret)
> - return ret;
> + goto rpm_out;
> }
>
> /* Configure IBI auto-rules */
> ret = svc_i3c_update_ibirules(master);
> - if (ret) {
> + if (ret)
> dev_err(master->dev, "Cannot handle such a list of devices");
> - return ret;
> - }
>
> - return 0;
> -
> -emit_stop:
> - svc_i3c_master_emit_stop(master);
> - svc_i3c_master_clear_merrwarn(master);
> +rpm_out:
> + pm_runtime_mark_last_busy(master->dev);
> + pm_runtime_put_autosuspend(master->dev);
>
> return ret;
> }
> @@ -1058,6 +1090,12 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
> if (!xfer)
> return;
>
> + ret = pm_runtime_resume_and_get(master->dev);
> + if (ret < 0) {
> + dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> + return;
> + }
> +
> svc_i3c_master_clear_merrwarn(master);
> svc_i3c_master_flush_fifo(master);
>
> @@ -1072,6 +1110,9 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
> break;
> }
>
> + pm_runtime_mark_last_busy(master->dev);
> + pm_runtime_put_autosuspend(master->dev);
> +
> xfer->ret = ret;
> complete(&xfer->comp);
>
> @@ -1348,6 +1389,14 @@ static void svc_i3c_master_free_ibi(struct i3c_dev_desc *dev)
> static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
> {
> struct i3c_master_controller *m = i3c_dev_get_master(dev);
> + struct svc_i3c_master *master = to_svc_i3c_master(m);
> + int ret;
> +
> + ret = pm_runtime_resume_and_get(master->dev);
> + if (ret < 0) {
> + dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> + return ret;
> + }
>
> return i3c_master_enec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
> }
> @@ -1355,8 +1404,15 @@ static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
> static int svc_i3c_master_disable_ibi(struct i3c_dev_desc *dev)
> {
> struct i3c_master_controller *m = i3c_dev_get_master(dev);
> + struct svc_i3c_master *master = to_svc_i3c_master(m);
> + int ret;
>
> - return i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
> + ret = i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
> +
> + pm_runtime_mark_last_busy(master->dev);
> + pm_runtime_put_autosuspend(master->dev);
> +
> + return ret;
> }
>
> static void svc_i3c_master_recycle_ibi_slot(struct i3c_dev_desc *dev,
> @@ -1455,16 +1511,31 @@ static int svc_i3c_master_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, master);
>
> + pm_runtime_set_autosuspend_delay(&pdev->dev, SVC_I3C_PM_TIMEOUT_MS);
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_runtime_get_noresume(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> +
> svc_i3c_master_reset(master);
>
> /* Register the master */
> ret = i3c_master_register(&master->base, &pdev->dev,
> &svc_i3c_master_ops, false);
> if (ret)
> - goto err_disable_sclk;
> + goto rpm_disable;
> +
> + pm_runtime_mark_last_busy(&pdev->dev);
> + pm_runtime_put_autosuspend(&pdev->dev);
>
> return 0;
>
> +rpm_disable:
> + pm_runtime_dont_use_autosuspend(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> + pm_runtime_set_suspended(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> +
> err_disable_sclk:
> clk_disable_unprepare(master->sclk);
>
> @@ -1486,13 +1557,57 @@ static int svc_i3c_master_remove(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + pm_runtime_dont_use_autosuspend(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused svc_i3c_runtime_suspend(struct device *dev)
> +{
> + struct svc_i3c_master *master = dev_get_drvdata(dev);
> +
> clk_disable_unprepare(master->pclk);
> clk_disable_unprepare(master->fclk);
> clk_disable_unprepare(master->sclk);
> + pinctrl_pm_select_sleep_state(dev);
>
> return 0;
> }
>
> +static int __maybe_unused svc_i3c_runtime_resume(struct device *dev)
> +{
> + struct svc_i3c_master *master = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + pinctrl_pm_select_default_state(dev);
> + ret = clk_prepare_enable(master->pclk);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(master->fclk);
> + if (ret) {
> + clk_disable_unprepare(master->pclk);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(master->sclk);
> + if (ret) {
> + clk_disable_unprepare(master->pclk);
> + clk_disable_unprepare(master->fclk);
> + return ret;
> + }
> +
> + return ret;
> +}
Can you create svc_i3c_master_prepare_clks() with the current content
of the above helper, then, use that from _runtime_resume() and _probe()
to avoid copying these lines?
With this change you can add my
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
> +
> +static const struct dev_pm_ops svc_i3c_pm_ops = {
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(svc_i3c_runtime_suspend,
> + svc_i3c_runtime_resume, NULL)
> +};
> +
> static const struct of_device_id svc_i3c_master_of_match_tbl[] = {
> { .compatible = "silvaco,i3c-master" },
> { /* sentinel */ },
> @@ -1504,6 +1619,7 @@ static struct platform_driver svc_i3c_master = {
> .driver = {
> .name = "silvaco-i3c-master",
> .of_match_table = svc_i3c_master_of_match_tbl,
> + .pm = &svc_i3c_pm_ops,
> },
> };
> module_platform_driver(svc_i3c_master);
Thanks,
Miquèl
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Clark Wang <xiaoning.wang@nxp.com>
Cc: conor.culhane@silvaco.com, alexandre.belloni@bootlin.com,
linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-imx@nxp.com
Subject: Re: [PATCH V4 6/8] i3c: master: svc: add runtime pm support
Date: Mon, 16 Aug 2021 08:59:50 +0200 [thread overview]
Message-ID: <20210816085950.014401a7@xps13> (raw)
In-Reply-To: <20210809063645.2289988-7-xiaoning.wang@nxp.com>
Hi Clark,
Clark Wang <xiaoning.wang@nxp.com> wrote on Mon, 9 Aug 2021 14:36:43
+0800:
> Add runtime pm support to dynamically manage the clock.
>
> Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
> Reviewed-by: Jun Li <jun.li@nxp.com>
> ---
> V4:
> - error path emit_stop only used in svc_i3c_master_do_daa() for one time, so
> remove it. Or it needs another goto command at the end of the function to
> skip it and to go to rpm_out.
> V3:
> - restore the error path of probe function
> - enable runtime pm just before i3c module reset
> V2: New patch in V2.
> ---
> drivers/i3c/master/svc-i3c-master.c | 154 ++++++++++++++++++++++++----
> 1 file changed, 135 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
> index 2a96b217cc78..5939e0936697 100644
> --- a/drivers/i3c/master/svc-i3c-master.c
> +++ b/drivers/i3c/master/svc-i3c-master.c
> @@ -17,7 +17,9 @@
> #include <linux/list.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>
> /* Master Mode Registers */
> #define SVC_I3C_MCONFIG 0x000
> @@ -119,6 +121,7 @@
> #define SVC_MDYNADDR_ADDR(x) FIELD_PREP(GENMASK(7, 1), (x))
>
> #define SVC_I3C_MAX_DEVS 32
> +#define SVC_I3C_PM_TIMEOUT_MS 1000
>
> /* This parameter depends on the implementation and may be tuned */
> #define SVC_I3C_FIFO_SIZE 16
> @@ -480,10 +483,20 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
> u32 ppbaud, pplow, odhpp, odbaud, odstop, i2cbaud, reg;
> int ret;
>
> + ret = pm_runtime_resume_and_get(master->dev);
> + if (ret < 0) {
> + dev_err(master->dev,
> + "<%s> cannot resume i3c bus master, err: %d\n",
> + __func__, ret);
> + return ret;
> + }
> +
> /* Timings derivation */
> fclk_rate = clk_get_rate(master->fclk);
> - if (!fclk_rate)
> - return -EINVAL;
> + if (!fclk_rate) {
> + ret = -EINVAL;
> + goto rpm_out;
> + }
>
> fclk_period_ns = DIV_ROUND_UP(1000000000, fclk_rate);
>
> @@ -527,7 +540,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
> odstop = 1;
> break;
> default:
> - return -EINVAL;
> + goto rpm_out;
> }
>
> reg = SVC_I3C_MCONFIG_MASTER_EN |
> @@ -545,7 +558,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
> /* Master core's registration */
> ret = i3c_master_get_free_addr(m, 0);
> if (ret < 0)
> - return ret;
> + goto rpm_out;
>
> info.dyn_addr = ret;
>
> @@ -554,21 +567,35 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
>
> ret = i3c_master_set_info(&master->base, &info);
> if (ret)
> - return ret;
> + goto rpm_out;
>
> svc_i3c_master_enable_interrupts(master, SVC_I3C_MINT_SLVSTART);
>
> - return 0;
> +rpm_out:
> + pm_runtime_mark_last_busy(master->dev);
> + pm_runtime_put_autosuspend(master->dev);
> +
> + return ret;
> }
>
> static void svc_i3c_master_bus_cleanup(struct i3c_master_controller *m)
> {
> struct svc_i3c_master *master = to_svc_i3c_master(m);
> + int ret;
> +
> + ret = pm_runtime_resume_and_get(master->dev);
> + if (ret < 0) {
> + dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> + return;
> + }
>
> svc_i3c_master_disable_interrupts(master);
>
> /* Disable master */
> writel(0, master->regs + SVC_I3C_MCONFIG);
> +
> + pm_runtime_mark_last_busy(master->dev);
> + pm_runtime_put_autosuspend(master->dev);
> }
>
> static int svc_i3c_master_reserve_slot(struct svc_i3c_master *master)
> @@ -867,31 +894,36 @@ static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
> unsigned int dev_nb;
> int ret, i;
>
> + ret = pm_runtime_resume_and_get(master->dev);
> + if (ret < 0) {
> + dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> + return ret;
> + }
> +
> spin_lock_irqsave(&master->xferqueue.lock, flags);
> ret = svc_i3c_master_do_daa_locked(master, addrs, &dev_nb);
> spin_unlock_irqrestore(&master->xferqueue.lock, flags);
> - if (ret)
> - goto emit_stop;
> + if (ret) {
> + svc_i3c_master_emit_stop(master);
> + svc_i3c_master_clear_merrwarn(master);
> + goto rpm_out;
> + }
>
> /* Register all devices who participated to the core */
> for (i = 0; i < dev_nb; i++) {
> ret = i3c_master_add_i3c_dev_locked(m, addrs[i]);
> if (ret)
> - return ret;
> + goto rpm_out;
> }
>
> /* Configure IBI auto-rules */
> ret = svc_i3c_update_ibirules(master);
> - if (ret) {
> + if (ret)
> dev_err(master->dev, "Cannot handle such a list of devices");
> - return ret;
> - }
>
> - return 0;
> -
> -emit_stop:
> - svc_i3c_master_emit_stop(master);
> - svc_i3c_master_clear_merrwarn(master);
> +rpm_out:
> + pm_runtime_mark_last_busy(master->dev);
> + pm_runtime_put_autosuspend(master->dev);
>
> return ret;
> }
> @@ -1058,6 +1090,12 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
> if (!xfer)
> return;
>
> + ret = pm_runtime_resume_and_get(master->dev);
> + if (ret < 0) {
> + dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> + return;
> + }
> +
> svc_i3c_master_clear_merrwarn(master);
> svc_i3c_master_flush_fifo(master);
>
> @@ -1072,6 +1110,9 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
> break;
> }
>
> + pm_runtime_mark_last_busy(master->dev);
> + pm_runtime_put_autosuspend(master->dev);
> +
> xfer->ret = ret;
> complete(&xfer->comp);
>
> @@ -1348,6 +1389,14 @@ static void svc_i3c_master_free_ibi(struct i3c_dev_desc *dev)
> static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
> {
> struct i3c_master_controller *m = i3c_dev_get_master(dev);
> + struct svc_i3c_master *master = to_svc_i3c_master(m);
> + int ret;
> +
> + ret = pm_runtime_resume_and_get(master->dev);
> + if (ret < 0) {
> + dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
> + return ret;
> + }
>
> return i3c_master_enec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
> }
> @@ -1355,8 +1404,15 @@ static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
> static int svc_i3c_master_disable_ibi(struct i3c_dev_desc *dev)
> {
> struct i3c_master_controller *m = i3c_dev_get_master(dev);
> + struct svc_i3c_master *master = to_svc_i3c_master(m);
> + int ret;
>
> - return i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
> + ret = i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
> +
> + pm_runtime_mark_last_busy(master->dev);
> + pm_runtime_put_autosuspend(master->dev);
> +
> + return ret;
> }
>
> static void svc_i3c_master_recycle_ibi_slot(struct i3c_dev_desc *dev,
> @@ -1455,16 +1511,31 @@ static int svc_i3c_master_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, master);
>
> + pm_runtime_set_autosuspend_delay(&pdev->dev, SVC_I3C_PM_TIMEOUT_MS);
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_runtime_get_noresume(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> +
> svc_i3c_master_reset(master);
>
> /* Register the master */
> ret = i3c_master_register(&master->base, &pdev->dev,
> &svc_i3c_master_ops, false);
> if (ret)
> - goto err_disable_sclk;
> + goto rpm_disable;
> +
> + pm_runtime_mark_last_busy(&pdev->dev);
> + pm_runtime_put_autosuspend(&pdev->dev);
>
> return 0;
>
> +rpm_disable:
> + pm_runtime_dont_use_autosuspend(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> + pm_runtime_set_suspended(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> +
> err_disable_sclk:
> clk_disable_unprepare(master->sclk);
>
> @@ -1486,13 +1557,57 @@ static int svc_i3c_master_remove(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + pm_runtime_dont_use_autosuspend(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused svc_i3c_runtime_suspend(struct device *dev)
> +{
> + struct svc_i3c_master *master = dev_get_drvdata(dev);
> +
> clk_disable_unprepare(master->pclk);
> clk_disable_unprepare(master->fclk);
> clk_disable_unprepare(master->sclk);
> + pinctrl_pm_select_sleep_state(dev);
>
> return 0;
> }
>
> +static int __maybe_unused svc_i3c_runtime_resume(struct device *dev)
> +{
> + struct svc_i3c_master *master = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + pinctrl_pm_select_default_state(dev);
> + ret = clk_prepare_enable(master->pclk);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(master->fclk);
> + if (ret) {
> + clk_disable_unprepare(master->pclk);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(master->sclk);
> + if (ret) {
> + clk_disable_unprepare(master->pclk);
> + clk_disable_unprepare(master->fclk);
> + return ret;
> + }
> +
> + return ret;
> +}
Can you create svc_i3c_master_prepare_clks() with the current content
of the above helper, then, use that from _runtime_resume() and _probe()
to avoid copying these lines?
With this change you can add my
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
> +
> +static const struct dev_pm_ops svc_i3c_pm_ops = {
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(svc_i3c_runtime_suspend,
> + svc_i3c_runtime_resume, NULL)
> +};
> +
> static const struct of_device_id svc_i3c_master_of_match_tbl[] = {
> { .compatible = "silvaco,i3c-master" },
> { /* sentinel */ },
> @@ -1504,6 +1619,7 @@ static struct platform_driver svc_i3c_master = {
> .driver = {
> .name = "silvaco-i3c-master",
> .of_match_table = svc_i3c_master_of_match_tbl,
> + .pm = &svc_i3c_pm_ops,
> },
> };
> module_platform_driver(svc_i3c_master);
Thanks,
Miquèl
next prev parent reply other threads:[~2021-08-16 7:00 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-09 6:36 [PATCH V4 0/8] i3c: master: svc: some bug fixes and add runtime pm support Clark Wang
2021-08-09 6:36 ` Clark Wang
2021-08-09 6:36 ` [PATCH V4 1/8] i3c: master: svc: move module reset behind clk enable Clark Wang
2021-08-09 6:36 ` Clark Wang
2021-08-09 6:36 ` [PATCH V4 2/8] i3c: master: svc: fix atomic issue Clark Wang
2021-08-09 6:36 ` Clark Wang
2021-08-09 6:36 ` [PATCH V4 3/8] i3c: master: svc: separate err, fifo and disable interrupt of reset function Clark Wang
2021-08-09 6:36 ` Clark Wang
2021-08-16 6:52 ` Miquel Raynal
2021-08-16 6:52 ` Miquel Raynal
2021-08-09 6:36 ` [PATCH V4 4/8] i3c: master: svc: add support for slave to stop returning data Clark Wang
2021-08-09 6:36 ` Clark Wang
2021-08-16 7:15 ` Miquel Raynal
2021-08-16 7:15 ` Miquel Raynal
2021-08-09 6:36 ` [PATCH V4 5/8] i3c: master: svc: set ODSTOP to let I2C device see the STOP signal Clark Wang
2021-08-09 6:36 ` Clark Wang
2021-08-09 6:36 ` [PATCH V4 6/8] i3c: master: svc: add runtime pm support Clark Wang
2021-08-09 6:36 ` Clark Wang
2021-08-16 6:59 ` Miquel Raynal [this message]
2021-08-16 6:59 ` Miquel Raynal
2021-08-09 6:36 ` [PATCH V4 7/8] i3c: master: svc: add the missing module device table Clark Wang
2021-08-09 6:36 ` Clark Wang
2021-08-16 7:00 ` Miquel Raynal
2021-08-16 7:00 ` Miquel Raynal
2021-08-09 6:36 ` [PATCH V4 8/8] i3c: master: svc: enable the interrupt in the enable ibi function Clark Wang
2021-08-09 6:36 ` Clark Wang
2021-08-16 7:02 ` Miquel Raynal
2021-08-16 7:02 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210816085950.014401a7@xps13 \
--to=miquel.raynal@bootlin.com \
--cc=alexandre.belloni@bootlin.com \
--cc=conor.culhane@silvaco.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.