From: Wong Vee Khee <vee.khee.wong@linux.intel.com>
To: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Cc: peppe.cavallaro@st.com, alexandre.torgue@foss.st.com,
joabreu@synopsys.com, davem@davemloft.net, kuba@kernel.org,
mcoquelin.stm32@gmail.com, vee.khee.wong@intel.com,
weifeng.voon@intel.com, netdev@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v1 2/3] net: stmmac: add ethtool per-queue statistic framework
Date: Mon, 16 Aug 2021 18:50:37 +0800 [thread overview]
Message-ID: <20210816105037.GA11930@linux.intel.com> (raw)
In-Reply-To: <b0fd3bf4e5c105e959df60d3c876297721b62ee6.1629092894.git.vijayakannan.ayyathurai@intel.com>
On Mon, Aug 16, 2021 at 02:15:59PM +0800, Vijayakannan Ayyathurai wrote:
> Adding generic ethtool per-queue statistic framework to display the
> statistics for each rx/tx queue. In future, users can avail it to add
> more per-queue specific counters. Number of rx/tx queues displayed is
> depending on the available rx/tx queues in that particular MAC config
> and this number is limited up to the MTL_MAX_{RX|TX}_QUEUES defined
> in the driver.
>
> Ethtool per-queue statistic display will look like below, when users
> start adding more counters.
>
> Example:
> q0_tx_statA:
> q0_tx_statB:
> q0_tx_statC:
> |
> q0_tx_statX:
> .
> .
> .
> qMAX_tx_statA:
> qMAX_tx_statB:
> qMAX_tx_statC:
> |
> qMAX_tx_statX:
>
> q0_rx_statA:
> q0_rx_statB:
> q0_rx_statC:
> |
> q0_rx_statX:
> .
> .
> .
> qMAX_rx_statA:
> qMAX_rx_statB:
> qMAX_rx_statC:
> |
> qMAX_rx_statX:
>
> In addition, this patch has the support on displaying the number of
> packets received and transmitted per queue.
>
Acked-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
> ---
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Wong Vee Khee <vee.khee.wong@linux.intel.com>
To: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Cc: peppe.cavallaro@st.com, alexandre.torgue@foss.st.com,
joabreu@synopsys.com, davem@davemloft.net, kuba@kernel.org,
mcoquelin.stm32@gmail.com, vee.khee.wong@intel.com,
weifeng.voon@intel.com, netdev@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v1 2/3] net: stmmac: add ethtool per-queue statistic framework
Date: Mon, 16 Aug 2021 18:50:37 +0800 [thread overview]
Message-ID: <20210816105037.GA11930@linux.intel.com> (raw)
In-Reply-To: <b0fd3bf4e5c105e959df60d3c876297721b62ee6.1629092894.git.vijayakannan.ayyathurai@intel.com>
On Mon, Aug 16, 2021 at 02:15:59PM +0800, Vijayakannan Ayyathurai wrote:
> Adding generic ethtool per-queue statistic framework to display the
> statistics for each rx/tx queue. In future, users can avail it to add
> more per-queue specific counters. Number of rx/tx queues displayed is
> depending on the available rx/tx queues in that particular MAC config
> and this number is limited up to the MTL_MAX_{RX|TX}_QUEUES defined
> in the driver.
>
> Ethtool per-queue statistic display will look like below, when users
> start adding more counters.
>
> Example:
> q0_tx_statA:
> q0_tx_statB:
> q0_tx_statC:
> |
> q0_tx_statX:
> .
> .
> .
> qMAX_tx_statA:
> qMAX_tx_statB:
> qMAX_tx_statC:
> |
> qMAX_tx_statX:
>
> q0_rx_statA:
> q0_rx_statB:
> q0_rx_statC:
> |
> q0_rx_statX:
> .
> .
> .
> qMAX_rx_statA:
> qMAX_rx_statB:
> qMAX_rx_statC:
> |
> qMAX_rx_statX:
>
> In addition, this patch has the support on displaying the number of
> packets received and transmitted per queue.
>
Acked-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
> ---
next prev parent reply other threads:[~2021-08-16 10:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-16 6:15 [PATCH net-next v1 0/3] net: stmmac: Add ethtool per-queue statistic Vijayakannan Ayyathurai
2021-08-16 6:15 ` Vijayakannan Ayyathurai
2021-08-16 6:15 ` [PATCH net-next v1 1/3] net: stmmac: fix INTR TBU status affecting irq count statistic Vijayakannan Ayyathurai
2021-08-16 6:15 ` Vijayakannan Ayyathurai
2021-08-16 10:47 ` Wong Vee Khee
2021-08-16 10:47 ` Wong Vee Khee
2021-08-16 6:15 ` [PATCH net-next v1 2/3] net: stmmac: add ethtool per-queue statistic framework Vijayakannan Ayyathurai
2021-08-16 6:15 ` Vijayakannan Ayyathurai
2021-08-16 10:50 ` Wong Vee Khee [this message]
2021-08-16 10:50 ` Wong Vee Khee
2021-08-16 6:16 ` [PATCH net-next v1 3/3] net: stmmac: add ethtool per-queue irq statistic support Vijayakannan Ayyathurai
2021-08-16 6:16 ` Vijayakannan Ayyathurai
2021-08-16 10:53 ` Wong Vee Khee
2021-08-16 10:53 ` Wong Vee Khee
2021-08-16 12:50 ` [PATCH net-next v1 0/3] net: stmmac: Add ethtool per-queue statistic patchwork-bot+netdevbpf
2021-08-16 12:50 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210816105037.GA11930@linux.intel.com \
--to=vee.khee.wong@linux.intel.com \
--cc=alexandre.torgue@foss.st.com \
--cc=davem@davemloft.net \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=vee.khee.wong@intel.com \
--cc=vijayakannan.ayyathurai@intel.com \
--cc=weifeng.voon@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.