* [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs
@ 2021-08-30 21:46 Eddie James
2021-08-30 21:46 ` [PATCH 2/2] ARM: dts: aspeed: everest: Add I2C bus 15 muxes Eddie James
2021-09-03 0:08 ` [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs Joel Stanley
0 siblings, 2 replies; 6+ messages in thread
From: Eddie James @ 2021-08-30 21:46 UTC (permalink / raw)
To: linux-aspeed
Add all the missing system LEDs. These are all connected by GPIO
expanders.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 1541 +++++++++++++++---
1 file changed, 1325 insertions(+), 216 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index d1467d5163f2..f222aea91b2e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -1126,6 +1126,62 @@ tmp275 at 4a {
reg = <0x4a>;
};
+ pca9551 at 60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "cablecard0-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "cablecard0-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
pca9546 at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
@@ -1182,6 +1238,118 @@ tmp275 at 49 {
reg = <0x49>;
};
+ pca9551 at 60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "cablecard3-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "cablecard3-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca9551 at 61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "cablecard4-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "cablecard4-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
pca9546 at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
@@ -1290,101 +1458,69 @@ &i2c7 {
multi-master;
status = "okay";
- si7021-a20 at 40 {
- compatible = "silabs,si7020";
- reg = <0x40>;
- };
-
- tmp275 at 48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
-
- max: max31785 at 52 {
- compatible = "maxim,max31785a";
- reg = <0x52>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- fan0: fan at 0 {
- compatible = "pmbus-fan";
- reg = <0>;
- tach-pulses = <2>;
- };
-
- fan1: fan at 1 {
- compatible = "pmbus-fan";
- reg = <1>;
- tach-pulses = <2>;
- };
-
- fan2: fan at 2 {
- compatible = "pmbus-fan";
- reg = <2>;
- tach-pulses = <2>;
- };
-
- fan3: fan at 3 {
- compatible = "pmbus-fan";
- reg = <3>;
- tach-pulses = <2>;
- };
-
- fan4: fan at 4 {
- compatible = "pmbus-fan";
- reg = <4>;
- tach-pulses = <2>;
- };
-
- fan5: fan at 5 {
- compatible = "pmbus-fan";
- reg = <5>;
- tach-pulses = <2>;
- };
- };
-
- pca0: pca9552 at 61 {
- compatible = "nxp,pca9552";
- reg = <0x61>;
+ pca9552 at 30 {
+ compatible = "ibm,pca9552";
+ reg = <0x30>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
- gpio at 0 {
+ led at 0 {
+ label = "pcieslot0";
reg = <0>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 1 {
+ led at 1 {
+ label = "pcieslot1";
reg = <1>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 2 {
+ led at 2 {
+ label = "pcieslot2";
reg = <2>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 3 {
+ led at 3 {
+ label = "pcieslot3";
reg = <3>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 4 {
+ led at 4 {
+ label = "pcieslot4";
reg = <4>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 5 {
+ led at 5 {
+ label = "cpu1";
reg = <5>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 6 {
+ led at 6 {
+ label = "cpu-vrm1";
reg = <6>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
gpio at 7 {
@@ -1392,9 +1528,12 @@ gpio at 7 {
type = <PCA955X_TYPE_GPIO>;
};
- gpio at 8 {
+ led at 8 {
+ label = "lcd-russel";
reg = <8>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
gpio at 9 {
@@ -1433,116 +1572,955 @@ gpio at 15 {
};
};
- ibm-panel at 62 {
- compatible = "ibm,op-panel";
- reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
- };
+ pca9552 at 31 {
+ compatible = "ibm,pca9552";
+ reg = <0x31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- dps: dps310 at 76 {
- compatible = "infineon,dps310";
- reg = <0x76>;
- #io-channel-cells = <0>;
- };
+ gpio-controller;
+ #gpio-cells = <2>;
- eeprom at 50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
+ led at 0 {
+ label = "ddimm0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- eeprom at 51 {
- compatible = "atmel,24c64";
- reg = <0x51>;
- };
-};
+ led at 1 {
+ label = "ddimm1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
-&i2c8 {
- status = "okay";
+ led at 2 {
+ label = "ddimm2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- ucd90320 at 11 {
- compatible = "ti,ucd90320";
- reg = <0x11>;
- };
+ led at 3 {
+ label = "ddimm3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- rtc at 32 {
- compatible = "epson,rx8900";
- reg = <0x32>;
- };
+ led at 4 {
+ label = "ddimm4";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- tmp275 at 48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
+ led at 5 {
+ label = "ddimm5";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- tmp275 at 4a {
- compatible = "ti,tmp275";
- reg = <0x4a>;
- };
+ led at 6 {
+ label = "ddimm6";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "ddimm7";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 8 {
+ label = "ddimm8";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 9 {
+ label = "ddimm9";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 10 {
+ label = "ddimm10";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 11 {
+ label = "ddimm11";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 12 {
+ label = "ddimm12";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 13 {
+ label = "ddimm13";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 14 {
+ label = "ddimm14";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 15 {
+ label = "ddimm15";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca9552 at 32 {
+ compatible = "ibm,pca9552";
+ reg = <0x32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "ddimm16";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "ddimm17";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "ddimm18";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "ddimm19";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "ddimm20";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "ddimm21";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "ddimm22";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "ddimm23";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 8 {
+ label = "ddimm24";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 9 {
+ label = "ddimm25";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 10 {
+ label = "ddimm26";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 11 {
+ label = "ddimm27";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 12 {
+ label = "ddimm28";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 13 {
+ label = "ddimm29";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 14 {
+ label = "ddimm30";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 15 {
+ label = "ddimm31";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca9552 at 33 {
+ compatible = "ibm,pca9552";
+ reg = <0x33>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "planar";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "cpu0";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led at 3 {
+ label = "dasd-pyramid0";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "dasd-pyramid1";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "dasd-pyramid2";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "cpu0-vrm0";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "rtc-battery";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 8 {
+ label = "base-blyth";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 9 {
+ label = "pcieslot6";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 10 {
+ label = "pcieslot7";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 11 {
+ label = "pcieslot8";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 12 {
+ label = "pcieslot9";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 13 {
+ label = "pcieslot10";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 14 {
+ label = "pcieslot11";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 15 {
+ label = "tpm-wilson";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ si7021-a20 at 40 {
+ compatible = "silabs,si7020";
+ reg = <0x40>;
+ };
+
+ tmp275 at 48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ max: max31785 at 52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan0: fan at 0 {
+ compatible = "pmbus-fan";
+ reg = <0>;
+ tach-pulses = <2>;
+ };
+
+ fan1: fan at 1 {
+ compatible = "pmbus-fan";
+ reg = <1>;
+ tach-pulses = <2>;
+ };
+
+ fan2: fan at 2 {
+ compatible = "pmbus-fan";
+ reg = <2>;
+ tach-pulses = <2>;
+ };
+
+ fan3: fan at 3 {
+ compatible = "pmbus-fan";
+ reg = <3>;
+ tach-pulses = <2>;
+ };
+
+ fan4: fan at 4 {
+ compatible = "pmbus-fan";
+ reg = <4>;
+ tach-pulses = <2>;
+ };
+
+ fan5: fan at 5 {
+ compatible = "pmbus-fan";
+ reg = <5>;
+ tach-pulses = <2>;
+ };
+ };
+
+ pca0: pca9552 at 61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "fan0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "fan1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "fan2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "fan3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "fan4";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "fan5";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ ibm-panel at 62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ dps: dps310 at 76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom at 51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ ucd90320 at 11 {
+ compatible = "ti,ucd90320";
+ reg = <0x11>;
+ };
+
+ rtc at 32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ tmp275 at 48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ tmp275 at 4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
eeprom at 50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
- eeprom at 51 {
+ eeprom at 51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ pca_pres2: pca9552 at 61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+ "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+ "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+ "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+ "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+ "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+ "", "", "", "";
+
+ gpio at 0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+};
+
+&i2c9 {
+ status = "okay";
+
+ tmp423a at 4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ tmp423b at 4d {
+ compatible = "ti,tmp423";
+ reg = <0x4d>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ tmp423a at 4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ tmp423b at 4d {
+ compatible = "ti,tmp423";
+ reg = <0x4d>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ tmp275 at 48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ tmp275 at 49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ pca9551 at 60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "cablecard10-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "cablecard10-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca9546 at 70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ i2c-mux-idle-disconnect;
+
+ i2c11mux0chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c11mux0chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom at 51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+
+ eeprom at 50 {
compatible = "atmel,24c64";
- reg = <0x51>;
+ reg = <0x50>;
};
- pca_pres2: pca9552 at 61 {
+ pca9552 at 60 {
compatible = "nxp,pca9552";
- reg = <0x61>;
+ reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
+
gpio-controller;
#gpio-cells = <2>;
- gpio-line-names =
- "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
- "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
- "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
- "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
- "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
- "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
- "", "", "", "";
-
- gpio at 0 {
+ led at 0 {
+ label = "nvme0";
reg = <0>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 1 {
+ led at 1 {
+ label = "nvme1";
reg = <1>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 2 {
+ led at 2 {
+ label = "nvme2";
reg = <2>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 3 {
+ led at 3 {
+ label = "nvme3";
reg = <3>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 4 {
+ led at 4 {
+ label = "nvme4";
reg = <4>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 5 {
+ led at 5 {
+ label = "nvme5";
reg = <5>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 6 {
+ led at 6 {
+ label = "nvme6";
reg = <6>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 7 {
+ led at 7 {
+ label = "nvme7";
reg = <7>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
gpio at 8 {
@@ -1585,111 +2563,128 @@ gpio at 15 {
type = <PCA955X_TYPE_GPIO>;
};
};
-
};
-&i2c9 {
+&i2c14 {
status = "okay";
- tmp423a at 4c {
- compatible = "ti,tmp423";
- reg = <0x4c>;
- };
-
- tmp423b at 4d {
- compatible = "ti,tmp423";
- reg = <0x4d>;
- };
-
eeprom at 50 {
- compatible = "atmel,24c128";
+ compatible = "atmel,24c64";
reg = <0x50>;
};
-};
-&i2c10 {
- status = "okay";
+ pca9552 at 60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- tmp423a at 4c {
- compatible = "ti,tmp423";
- reg = <0x4c>;
- };
+ gpio-controller;
+ #gpio-cells = <2>;
- tmp423b at 4d {
- compatible = "ti,tmp423";
- reg = <0x4d>;
- };
+ led at 0 {
+ label = "nvme8";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- eeprom at 50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- };
-};
+ led at 1 {
+ label = "nvme9";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
-&i2c11 {
- status = "okay";
+ led at 2 {
+ label = "nvme10";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- tmp275 at 48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
+ led at 3 {
+ label = "nvme11";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- tmp275 at 49 {
- compatible = "ti,tmp275";
- reg = <0x49>;
- };
+ led at 4 {
+ label = "nvme12";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- pca9546 at 70 {
- compatible = "nxp,pca9546";
- reg = <0x70>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
- i2c-mux-idle-disconnect;
+ led at 5 {
+ label = "nvme13";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- i2c11mux0chn0: i2c at 0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
+ led at 6 {
+ label = "nvme14";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
- eeprom at 50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
+ led at 7 {
+ label = "nvme15";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- i2c11mux0chn1: i2c at 1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
+ gpio at 8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
- eeprom at 51 {
- compatible = "atmel,24c64";
- reg = <0x51>;
- };
+ gpio at 9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
};
- };
-};
-&i2c12 {
- status = "okay";
-};
+ gpio at 10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
-&i2c13 {
- status = "okay";
+ gpio at 11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
- eeprom at 50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
-};
+ gpio at 12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
-&i2c14 {
- status = "okay";
+ gpio at 13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
- eeprom at 50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
+ gpio at 14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
};
};
@@ -1700,6 +2695,120 @@ eeprom at 50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
+
+ pca9552 at 60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "nvme16";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "nvme17";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "nvme18";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "nvme19";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "nvme20";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "nvme21";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "nvme22";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "nvme23";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
&vuart1 {
--
2.27.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] ARM: dts: aspeed: everest: Add I2C bus 15 muxes
2021-08-30 21:46 [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs Eddie James
@ 2021-08-30 21:46 ` Eddie James
2021-09-03 0:08 ` [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs Joel Stanley
1 sibling, 0 replies; 6+ messages in thread
From: Eddie James @ 2021-08-30 21:46 UTC (permalink / raw)
To: linux-aspeed
Add the muxes that are attached on I2C bus 15.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 158 +++++++++++++++++++
1 file changed, 158 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 2efd70666738..e7da58595d14 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -96,6 +96,18 @@ aliases {
i2c32 = &i2c14mux1chn1;
i2c33 = &i2c14mux1chn2;
i2c34 = &i2c14mux1chn3;
+ i2c35 = &i2c15mux0chn0;
+ i2c36 = &i2c15mux0chn1;
+ i2c37 = &i2c15mux0chn2;
+ i2c38 = &i2c15mux0chn3;
+ i2c39 = &i2c15mux1chn0;
+ i2c40 = &i2c15mux1chn1;
+ i2c41 = &i2c15mux1chn2;
+ i2c42 = &i2c15mux1chn3;
+ i2c43 = &i2c15mux2chn0;
+ i2c44 = &i2c15mux2chn1;
+ i2c45 = &i2c15mux2chn2;
+ i2c46 = &i2c15mux2chn3;
serial4 = &uart5;
@@ -2816,6 +2828,152 @@ eeprom at 50 {
&i2c15 {
status = "okay";
+
+ i2c-switch at 70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux0chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux0chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux0chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux0chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ };
+
+ i2c-switch at 71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux1chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux1chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux1chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux1chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ };
+
+ i2c-switch at 72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux2chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux2chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux2chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c15mux2chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
};
&ehci1 {
--
2.27.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs
2021-08-30 21:46 [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs Eddie James
2021-08-30 21:46 ` [PATCH 2/2] ARM: dts: aspeed: everest: Add I2C bus 15 muxes Eddie James
@ 2021-09-03 0:08 ` Joel Stanley
2021-09-03 21:40 ` Eddie James
1 sibling, 1 reply; 6+ messages in thread
From: Joel Stanley @ 2021-09-03 0:08 UTC (permalink / raw)
To: linux-aspeed
On Mon, 30 Aug 2021 at 21:46, Eddie James <eajames@linux.ibm.com> wrote:
>
> Add all the missing system LEDs. These are all connected by GPIO
> expanders.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
Can you resend this with --minimal added to your git-format-patch
line? It creates a much better diff that is easier to review.
Please cc linux-arm-kernel so it ends up on lore.kernel.org.
It would be good if you could cc some of the people involved in LEDs
so they can review the patch for us. Andrew J and Ravindra perhaps?
Cheers,
Joel
> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 1541 +++++++++++++++---
> 1 file changed, 1325 insertions(+), 216 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index d1467d5163f2..f222aea91b2e 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -1126,6 +1126,62 @@ tmp275 at 4a {
> reg = <0x4a>;
> };
>
> + pca9551 at 60 {
> + compatible = "nxp,pca9551";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + led at 0 {
> + label = "cablecard0-cxp-top";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 1 {
> + label = "cablecard0-cxp-bot";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> pca9546 at 70 {
> compatible = "nxp,pca9546";
> reg = <0x70>;
> @@ -1182,6 +1238,118 @@ tmp275 at 49 {
> reg = <0x49>;
> };
>
> + pca9551 at 60 {
> + compatible = "nxp,pca9551";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + led at 0 {
> + label = "cablecard3-cxp-top";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 1 {
> + label = "cablecard3-cxp-bot";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + pca9551 at 61 {
> + compatible = "nxp,pca9551";
> + reg = <0x61>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + led at 0 {
> + label = "cablecard4-cxp-top";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 1 {
> + label = "cablecard4-cxp-bot";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> pca9546 at 70 {
> compatible = "nxp,pca9546";
> reg = <0x70>;
> @@ -1290,101 +1458,69 @@ &i2c7 {
> multi-master;
> status = "okay";
>
> - si7021-a20 at 40 {
> - compatible = "silabs,si7020";
> - reg = <0x40>;
> - };
> -
> - tmp275 at 48 {
> - compatible = "ti,tmp275";
> - reg = <0x48>;
> - };
> -
> - max: max31785 at 52 {
> - compatible = "maxim,max31785a";
> - reg = <0x52>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - fan0: fan at 0 {
> - compatible = "pmbus-fan";
> - reg = <0>;
> - tach-pulses = <2>;
> - };
> -
> - fan1: fan at 1 {
> - compatible = "pmbus-fan";
> - reg = <1>;
> - tach-pulses = <2>;
> - };
> -
> - fan2: fan at 2 {
> - compatible = "pmbus-fan";
> - reg = <2>;
> - tach-pulses = <2>;
> - };
> -
> - fan3: fan at 3 {
> - compatible = "pmbus-fan";
> - reg = <3>;
> - tach-pulses = <2>;
> - };
> -
> - fan4: fan at 4 {
> - compatible = "pmbus-fan";
> - reg = <4>;
> - tach-pulses = <2>;
> - };
> -
> - fan5: fan at 5 {
> - compatible = "pmbus-fan";
> - reg = <5>;
> - tach-pulses = <2>;
> - };
> - };
> -
> - pca0: pca9552 at 61 {
> - compatible = "nxp,pca9552";
> - reg = <0x61>;
> + pca9552 at 30 {
> + compatible = "ibm,pca9552";
> + reg = <0x30>;
> #address-cells = <1>;
> #size-cells = <0>;
>
> gpio-controller;
> #gpio-cells = <2>;
>
> - gpio at 0 {
> + led at 0 {
> + label = "pcieslot0";
> reg = <0>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 1 {
> + led at 1 {
> + label = "pcieslot1";
> reg = <1>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 2 {
> + led at 2 {
> + label = "pcieslot2";
> reg = <2>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 3 {
> + led at 3 {
> + label = "pcieslot3";
> reg = <3>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 4 {
> + led at 4 {
> + label = "pcieslot4";
> reg = <4>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 5 {
> + led at 5 {
> + label = "cpu1";
> reg = <5>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 6 {
> + led at 6 {
> + label = "cpu-vrm1";
> reg = <6>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> gpio at 7 {
> @@ -1392,9 +1528,12 @@ gpio at 7 {
> type = <PCA955X_TYPE_GPIO>;
> };
>
> - gpio at 8 {
> + led at 8 {
> + label = "lcd-russel";
> reg = <8>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> gpio at 9 {
> @@ -1433,116 +1572,955 @@ gpio at 15 {
> };
> };
>
> - ibm-panel at 62 {
> - compatible = "ibm,op-panel";
> - reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
> - };
> + pca9552 at 31 {
> + compatible = "ibm,pca9552";
> + reg = <0x31>;
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - dps: dps310 at 76 {
> - compatible = "infineon,dps310";
> - reg = <0x76>;
> - #io-channel-cells = <0>;
> - };
> + gpio-controller;
> + #gpio-cells = <2>;
>
> - eeprom at 50 {
> - compatible = "atmel,24c64";
> - reg = <0x50>;
> - };
> + led at 0 {
> + label = "ddimm0";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - eeprom at 51 {
> - compatible = "atmel,24c64";
> - reg = <0x51>;
> - };
> -};
> + led at 1 {
> + label = "ddimm1";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> -&i2c8 {
> - status = "okay";
> + led at 2 {
> + label = "ddimm2";
> + reg = <2>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - ucd90320 at 11 {
> - compatible = "ti,ucd90320";
> - reg = <0x11>;
> - };
> + led at 3 {
> + label = "ddimm3";
> + reg = <3>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - rtc at 32 {
> - compatible = "epson,rx8900";
> - reg = <0x32>;
> - };
> + led at 4 {
> + label = "ddimm4";
> + reg = <4>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - tmp275 at 48 {
> - compatible = "ti,tmp275";
> - reg = <0x48>;
> - };
> + led at 5 {
> + label = "ddimm5";
> + reg = <5>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - tmp275 at 4a {
> - compatible = "ti,tmp275";
> - reg = <0x4a>;
> - };
> + led at 6 {
> + label = "ddimm6";
> + reg = <6>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 7 {
> + label = "ddimm7";
> + reg = <7>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 8 {
> + label = "ddimm8";
> + reg = <8>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 9 {
> + label = "ddimm9";
> + reg = <9>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 10 {
> + label = "ddimm10";
> + reg = <10>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 11 {
> + label = "ddimm11";
> + reg = <11>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 12 {
> + label = "ddimm12";
> + reg = <12>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 13 {
> + label = "ddimm13";
> + reg = <13>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 14 {
> + label = "ddimm14";
> + reg = <14>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 15 {
> + label = "ddimm15";
> + reg = <15>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> + };
> +
> + pca9552 at 32 {
> + compatible = "ibm,pca9552";
> + reg = <0x32>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + led at 0 {
> + label = "ddimm16";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 1 {
> + label = "ddimm17";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 2 {
> + label = "ddimm18";
> + reg = <2>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 3 {
> + label = "ddimm19";
> + reg = <3>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 4 {
> + label = "ddimm20";
> + reg = <4>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 5 {
> + label = "ddimm21";
> + reg = <5>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 6 {
> + label = "ddimm22";
> + reg = <6>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 7 {
> + label = "ddimm23";
> + reg = <7>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 8 {
> + label = "ddimm24";
> + reg = <8>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 9 {
> + label = "ddimm25";
> + reg = <9>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 10 {
> + label = "ddimm26";
> + reg = <10>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 11 {
> + label = "ddimm27";
> + reg = <11>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 12 {
> + label = "ddimm28";
> + reg = <12>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 13 {
> + label = "ddimm29";
> + reg = <13>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 14 {
> + label = "ddimm30";
> + reg = <14>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 15 {
> + label = "ddimm31";
> + reg = <15>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> + };
> +
> + pca9552 at 33 {
> + compatible = "ibm,pca9552";
> + reg = <0x33>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + led at 0 {
> + label = "planar";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 1 {
> + label = "cpu0";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + led at 3 {
> + label = "dasd-pyramid0";
> + reg = <3>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 4 {
> + label = "dasd-pyramid1";
> + reg = <4>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 5 {
> + label = "dasd-pyramid2";
> + reg = <5>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 6 {
> + label = "cpu0-vrm0";
> + reg = <6>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 7 {
> + label = "rtc-battery";
> + reg = <7>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 8 {
> + label = "base-blyth";
> + reg = <8>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 9 {
> + label = "pcieslot6";
> + reg = <9>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 10 {
> + label = "pcieslot7";
> + reg = <10>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 11 {
> + label = "pcieslot8";
> + reg = <11>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 12 {
> + label = "pcieslot9";
> + reg = <12>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 13 {
> + label = "pcieslot10";
> + reg = <13>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 14 {
> + label = "pcieslot11";
> + reg = <14>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 15 {
> + label = "tpm-wilson";
> + reg = <15>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> + };
> +
> + si7021-a20 at 40 {
> + compatible = "silabs,si7020";
> + reg = <0x40>;
> + };
> +
> + tmp275 at 48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + max: max31785 at 52 {
> + compatible = "maxim,max31785a";
> + reg = <0x52>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + fan0: fan at 0 {
> + compatible = "pmbus-fan";
> + reg = <0>;
> + tach-pulses = <2>;
> + };
> +
> + fan1: fan at 1 {
> + compatible = "pmbus-fan";
> + reg = <1>;
> + tach-pulses = <2>;
> + };
> +
> + fan2: fan at 2 {
> + compatible = "pmbus-fan";
> + reg = <2>;
> + tach-pulses = <2>;
> + };
> +
> + fan3: fan at 3 {
> + compatible = "pmbus-fan";
> + reg = <3>;
> + tach-pulses = <2>;
> + };
> +
> + fan4: fan at 4 {
> + compatible = "pmbus-fan";
> + reg = <4>;
> + tach-pulses = <2>;
> + };
> +
> + fan5: fan at 5 {
> + compatible = "pmbus-fan";
> + reg = <5>;
> + tach-pulses = <2>;
> + };
> + };
> +
> + pca0: pca9552 at 61 {
> + compatible = "nxp,pca9552";
> + reg = <0x61>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + led at 0 {
> + label = "fan0";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 1 {
> + label = "fan1";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 2 {
> + label = "fan2";
> + reg = <2>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 3 {
> + label = "fan3";
> + reg = <3>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 4 {
> + label = "fan4";
> + reg = <4>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 5 {
> + label = "fan5";
> + reg = <5>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + ibm-panel at 62 {
> + compatible = "ibm,op-panel";
> + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
> + };
> +
> + dps: dps310 at 76 {
> + compatible = "infineon,dps310";
> + reg = <0x76>;
> + #io-channel-cells = <0>;
> + };
> +
> + eeprom at 50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> +
> + eeprom at 51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + };
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + ucd90320 at 11 {
> + compatible = "ti,ucd90320";
> + reg = <0x11>;
> + };
> +
> + rtc at 32 {
> + compatible = "epson,rx8900";
> + reg = <0x32>;
> + };
> +
> + tmp275 at 48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + tmp275 at 4a {
> + compatible = "ti,tmp275";
> + reg = <0x4a>;
> + };
>
> eeprom at 50 {
> compatible = "atmel,24c64";
> reg = <0x50>;
> };
>
> - eeprom at 51 {
> + eeprom at 51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + };
> +
> + pca_pres2: pca9552 at 61 {
> + compatible = "nxp,pca9552";
> + reg = <0x61>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio-line-names =
> + "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
> + "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
> + "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
> + "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
> + "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
> + "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
> + "", "", "", "";
> +
> + gpio at 0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> +};
> +
> +&i2c9 {
> + status = "okay";
> +
> + tmp423a at 4c {
> + compatible = "ti,tmp423";
> + reg = <0x4c>;
> + };
> +
> + tmp423b at 4d {
> + compatible = "ti,tmp423";
> + reg = <0x4d>;
> + };
> +
> + eeprom at 50 {
> + compatible = "atmel,24c128";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c10 {
> + status = "okay";
> +
> + tmp423a at 4c {
> + compatible = "ti,tmp423";
> + reg = <0x4c>;
> + };
> +
> + tmp423b at 4d {
> + compatible = "ti,tmp423";
> + reg = <0x4d>;
> + };
> +
> + eeprom at 50 {
> + compatible = "atmel,24c128";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + tmp275 at 48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + tmp275 at 49 {
> + compatible = "ti,tmp275";
> + reg = <0x49>;
> + };
> +
> + pca9551 at 60 {
> + compatible = "nxp,pca9551";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + led at 0 {
> + label = "cablecard10-cxp-top";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 1 {
> + label = "cablecard10-cxp-bot";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + pca9546 at 70 {
> + compatible = "nxp,pca9546";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> + i2c-mux-idle-disconnect;
> +
> + i2c11mux0chn0: i2c at 0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + eeprom at 50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c11mux0chn1: i2c at 1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + eeprom at 51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + };
> + };
> + };
> +};
> +
> +&i2c12 {
> + status = "okay";
> +};
> +
> +&i2c13 {
> + status = "okay";
> +
> + eeprom at 50 {
> compatible = "atmel,24c64";
> - reg = <0x51>;
> + reg = <0x50>;
> };
>
> - pca_pres2: pca9552 at 61 {
> + pca9552 at 60 {
> compatible = "nxp,pca9552";
> - reg = <0x61>;
> + reg = <0x60>;
> #address-cells = <1>;
> #size-cells = <0>;
> +
> gpio-controller;
> #gpio-cells = <2>;
>
> - gpio-line-names =
> - "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
> - "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
> - "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
> - "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
> - "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
> - "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
> - "", "", "", "";
> -
> - gpio at 0 {
> + led at 0 {
> + label = "nvme0";
> reg = <0>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 1 {
> + led at 1 {
> + label = "nvme1";
> reg = <1>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 2 {
> + led at 2 {
> + label = "nvme2";
> reg = <2>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 3 {
> + led at 3 {
> + label = "nvme3";
> reg = <3>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 4 {
> + led at 4 {
> + label = "nvme4";
> reg = <4>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 5 {
> + led at 5 {
> + label = "nvme5";
> reg = <5>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 6 {
> + led at 6 {
> + label = "nvme6";
> reg = <6>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - gpio at 7 {
> + led at 7 {
> + label = "nvme7";
> reg = <7>;
> - type = <PCA955X_TYPE_GPIO>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> gpio at 8 {
> @@ -1585,111 +2563,128 @@ gpio at 15 {
> type = <PCA955X_TYPE_GPIO>;
> };
> };
> -
> };
>
> -&i2c9 {
> +&i2c14 {
> status = "okay";
>
> - tmp423a at 4c {
> - compatible = "ti,tmp423";
> - reg = <0x4c>;
> - };
> -
> - tmp423b at 4d {
> - compatible = "ti,tmp423";
> - reg = <0x4d>;
> - };
> -
> eeprom at 50 {
> - compatible = "atmel,24c128";
> + compatible = "atmel,24c64";
> reg = <0x50>;
> };
> -};
>
> -&i2c10 {
> - status = "okay";
> + pca9552 at 60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - tmp423a at 4c {
> - compatible = "ti,tmp423";
> - reg = <0x4c>;
> - };
> + gpio-controller;
> + #gpio-cells = <2>;
>
> - tmp423b at 4d {
> - compatible = "ti,tmp423";
> - reg = <0x4d>;
> - };
> + led at 0 {
> + label = "nvme8";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - eeprom at 50 {
> - compatible = "atmel,24c128";
> - reg = <0x50>;
> - };
> -};
> + led at 1 {
> + label = "nvme9";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> -&i2c11 {
> - status = "okay";
> + led at 2 {
> + label = "nvme10";
> + reg = <2>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - tmp275 at 48 {
> - compatible = "ti,tmp275";
> - reg = <0x48>;
> - };
> + led at 3 {
> + label = "nvme11";
> + reg = <3>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - tmp275 at 49 {
> - compatible = "ti,tmp275";
> - reg = <0x49>;
> - };
> + led at 4 {
> + label = "nvme12";
> + reg = <4>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - pca9546 at 70 {
> - compatible = "nxp,pca9546";
> - reg = <0x70>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "okay";
> - i2c-mux-idle-disconnect;
> + led at 5 {
> + label = "nvme13";
> + reg = <5>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - i2c11mux0chn0: i2c at 0 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0>;
> + led at 6 {
> + label = "nvme14";
> + reg = <6>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
>
> - eeprom at 50 {
> - compatible = "atmel,24c64";
> - reg = <0x50>;
> - };
> + led at 7 {
> + label = "nvme15";
> + reg = <7>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> };
>
> - i2c11mux0chn1: i2c at 1 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <1>;
> + gpio at 8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
>
> - eeprom at 51 {
> - compatible = "atmel,24c64";
> - reg = <0x51>;
> - };
> + gpio at 9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> };
> - };
> -};
>
> -&i2c12 {
> - status = "okay";
> -};
> + gpio at 10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
>
> -&i2c13 {
> - status = "okay";
> + gpio at 11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
>
> - eeprom at 50 {
> - compatible = "atmel,24c64";
> - reg = <0x50>;
> - };
> -};
> + gpio at 12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
>
> -&i2c14 {
> - status = "okay";
> + gpio at 13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
>
> - eeprom at 50 {
> - compatible = "atmel,24c64";
> - reg = <0x50>;
> + gpio at 14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> };
> };
>
> @@ -1700,6 +2695,120 @@ eeprom at 50 {
> compatible = "atmel,24c64";
> reg = <0x50>;
> };
> +
> + pca9552 at 60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + led at 0 {
> + label = "nvme16";
> + reg = <0>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 1 {
> + label = "nvme17";
> + reg = <1>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 2 {
> + label = "nvme18";
> + reg = <2>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 3 {
> + label = "nvme19";
> + reg = <3>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 4 {
> + label = "nvme20";
> + reg = <4>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 5 {
> + label = "nvme21";
> + reg = <5>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 6 {
> + label = "nvme22";
> + reg = <6>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + led at 7 {
> + label = "nvme23";
> + reg = <7>;
> + retain-state-shutdown;
> + default-state = "keep";
> + type = <PCA955X_TYPE_LED>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> };
>
> &vuart1 {
> --
> 2.27.0
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs
2021-09-03 0:08 ` [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs Joel Stanley
@ 2021-09-03 21:40 ` Eddie James
0 siblings, 0 replies; 6+ messages in thread
From: Eddie James @ 2021-09-03 21:40 UTC (permalink / raw)
To: linux-aspeed
On Fri, 2021-09-03 at 00:08 +0000, Joel Stanley wrote:
> On Mon, 30 Aug 2021 at 21:46, Eddie James <eajames@linux.ibm.com>
> wrote:
> > Add all the missing system LEDs. These are all connected by GPIO
> > expanders.
> >
> > Signed-off-by: Eddie James <eajames@linux.ibm.com>
>
> Can you resend this with --minimal added to your git-format-patch
> line? It creates a much better diff that is easier to review.
>
> Please cc linux-arm-kernel so it ends up on lore.kernel.org.
>
> It would be good if you could cc some of the people involved in LEDs
> so they can review the patch for us. Andrew J and Ravindra perhaps?
Thanks for the tip, I will do so... was wondering why it was so bad.
Thanks,
Eddie
>
> Cheers,
>
> Joel
>
>
> > ---
> > arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 1541
> > +++++++++++++++---
> > 1 file changed, 1325 insertions(+), 216 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> > b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> > index d1467d5163f2..f222aea91b2e 100644
> > --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> > +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> > @@ -1126,6 +1126,62 @@ tmp275 at 4a {
> > reg = <0x4a>;
> > };
> >
> > + pca9551 at 60 {
> > + compatible = "nxp,pca9551";
> > + reg = <0x60>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + led at 0 {
> > + label = "cablecard0-cxp-top";
> > + reg = <0>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 1 {
> > + label = "cablecard0-cxp-bot";
> > + reg = <1>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > pca9546 at 70 {
> > compatible = "nxp,pca9546";
> > reg = <0x70>;
> > @@ -1182,6 +1238,118 @@ tmp275 at 49 {
> > reg = <0x49>;
> > };
> >
> > + pca9551 at 60 {
> > + compatible = "nxp,pca9551";
> > + reg = <0x60>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + led at 0 {
> > + label = "cablecard3-cxp-top";
> > + reg = <0>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 1 {
> > + label = "cablecard3-cxp-bot";
> > + reg = <1>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca9551 at 61 {
> > + compatible = "nxp,pca9551";
> > + reg = <0x61>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + led at 0 {
> > + label = "cablecard4-cxp-top";
> > + reg = <0>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 1 {
> > + label = "cablecard4-cxp-bot";
> > + reg = <1>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > pca9546 at 70 {
> > compatible = "nxp,pca9546";
> > reg = <0x70>;
> > @@ -1290,101 +1458,69 @@ &i2c7 {
> > multi-master;
> > status = "okay";
> >
> > - si7021-a20 at 40 {
> > - compatible = "silabs,si7020";
> > - reg = <0x40>;
> > - };
> > -
> > - tmp275 at 48 {
> > - compatible = "ti,tmp275";
> > - reg = <0x48>;
> > - };
> > -
> > - max: max31785 at 52 {
> > - compatible = "maxim,max31785a";
> > - reg = <0x52>;
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - fan0: fan at 0 {
> > - compatible = "pmbus-fan";
> > - reg = <0>;
> > - tach-pulses = <2>;
> > - };
> > -
> > - fan1: fan at 1 {
> > - compatible = "pmbus-fan";
> > - reg = <1>;
> > - tach-pulses = <2>;
> > - };
> > -
> > - fan2: fan at 2 {
> > - compatible = "pmbus-fan";
> > - reg = <2>;
> > - tach-pulses = <2>;
> > - };
> > -
> > - fan3: fan at 3 {
> > - compatible = "pmbus-fan";
> > - reg = <3>;
> > - tach-pulses = <2>;
> > - };
> > -
> > - fan4: fan at 4 {
> > - compatible = "pmbus-fan";
> > - reg = <4>;
> > - tach-pulses = <2>;
> > - };
> > -
> > - fan5: fan at 5 {
> > - compatible = "pmbus-fan";
> > - reg = <5>;
> > - tach-pulses = <2>;
> > - };
> > - };
> > -
> > - pca0: pca9552 at 61 {
> > - compatible = "nxp,pca9552";
> > - reg = <0x61>;
> > + pca9552 at 30 {
> > + compatible = "ibm,pca9552";
> > + reg = <0x30>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> >
> > gpio-controller;
> > #gpio-cells = <2>;
> >
> > - gpio at 0 {
> > + led at 0 {
> > + label = "pcieslot0";
> > reg = <0>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 1 {
> > + led at 1 {
> > + label = "pcieslot1";
> > reg = <1>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 2 {
> > + led at 2 {
> > + label = "pcieslot2";
> > reg = <2>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 3 {
> > + led at 3 {
> > + label = "pcieslot3";
> > reg = <3>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 4 {
> > + led at 4 {
> > + label = "pcieslot4";
> > reg = <4>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 5 {
> > + led at 5 {
> > + label = "cpu1";
> > reg = <5>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 6 {
> > + led at 6 {
> > + label = "cpu-vrm1";
> > reg = <6>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > gpio at 7 {
> > @@ -1392,9 +1528,12 @@ gpio at 7 {
> > type = <PCA955X_TYPE_GPIO>;
> > };
> >
> > - gpio at 8 {
> > + led at 8 {
> > + label = "lcd-russel";
> > reg = <8>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > gpio at 9 {
> > @@ -1433,116 +1572,955 @@ gpio at 15 {
> > };
> > };
> >
> > - ibm-panel at 62 {
> > - compatible = "ibm,op-panel";
> > - reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
> > - };
> > + pca9552 at 31 {
> > + compatible = "ibm,pca9552";
> > + reg = <0x31>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> >
> > - dps: dps310 at 76 {
> > - compatible = "infineon,dps310";
> > - reg = <0x76>;
> > - #io-channel-cells = <0>;
> > - };
> > + gpio-controller;
> > + #gpio-cells = <2>;
> >
> > - eeprom at 50 {
> > - compatible = "atmel,24c64";
> > - reg = <0x50>;
> > - };
> > + led at 0 {
> > + label = "ddimm0";
> > + reg = <0>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - eeprom at 51 {
> > - compatible = "atmel,24c64";
> > - reg = <0x51>;
> > - };
> > -};
> > + led at 1 {
> > + label = "ddimm1";
> > + reg = <1>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > -&i2c8 {
> > - status = "okay";
> > + led at 2 {
> > + label = "ddimm2";
> > + reg = <2>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - ucd90320 at 11 {
> > - compatible = "ti,ucd90320";
> > - reg = <0x11>;
> > - };
> > + led at 3 {
> > + label = "ddimm3";
> > + reg = <3>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - rtc at 32 {
> > - compatible = "epson,rx8900";
> > - reg = <0x32>;
> > - };
> > + led at 4 {
> > + label = "ddimm4";
> > + reg = <4>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - tmp275 at 48 {
> > - compatible = "ti,tmp275";
> > - reg = <0x48>;
> > - };
> > + led at 5 {
> > + label = "ddimm5";
> > + reg = <5>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - tmp275 at 4a {
> > - compatible = "ti,tmp275";
> > - reg = <0x4a>;
> > - };
> > + led at 6 {
> > + label = "ddimm6";
> > + reg = <6>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 7 {
> > + label = "ddimm7";
> > + reg = <7>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 8 {
> > + label = "ddimm8";
> > + reg = <8>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 9 {
> > + label = "ddimm9";
> > + reg = <9>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 10 {
> > + label = "ddimm10";
> > + reg = <10>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 11 {
> > + label = "ddimm11";
> > + reg = <11>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 12 {
> > + label = "ddimm12";
> > + reg = <12>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 13 {
> > + label = "ddimm13";
> > + reg = <13>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 14 {
> > + label = "ddimm14";
> > + reg = <14>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 15 {
> > + label = "ddimm15";
> > + reg = <15>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > + };
> > +
> > + pca9552 at 32 {
> > + compatible = "ibm,pca9552";
> > + reg = <0x32>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + led at 0 {
> > + label = "ddimm16";
> > + reg = <0>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 1 {
> > + label = "ddimm17";
> > + reg = <1>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 2 {
> > + label = "ddimm18";
> > + reg = <2>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 3 {
> > + label = "ddimm19";
> > + reg = <3>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 4 {
> > + label = "ddimm20";
> > + reg = <4>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 5 {
> > + label = "ddimm21";
> > + reg = <5>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 6 {
> > + label = "ddimm22";
> > + reg = <6>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 7 {
> > + label = "ddimm23";
> > + reg = <7>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 8 {
> > + label = "ddimm24";
> > + reg = <8>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 9 {
> > + label = "ddimm25";
> > + reg = <9>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 10 {
> > + label = "ddimm26";
> > + reg = <10>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 11 {
> > + label = "ddimm27";
> > + reg = <11>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 12 {
> > + label = "ddimm28";
> > + reg = <12>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 13 {
> > + label = "ddimm29";
> > + reg = <13>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 14 {
> > + label = "ddimm30";
> > + reg = <14>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 15 {
> > + label = "ddimm31";
> > + reg = <15>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > + };
> > +
> > + pca9552 at 33 {
> > + compatible = "ibm,pca9552";
> > + reg = <0x33>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + led at 0 {
> > + label = "planar";
> > + reg = <0>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 1 {
> > + label = "cpu0";
> > + reg = <1>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + led at 3 {
> > + label = "dasd-pyramid0";
> > + reg = <3>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 4 {
> > + label = "dasd-pyramid1";
> > + reg = <4>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 5 {
> > + label = "dasd-pyramid2";
> > + reg = <5>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 6 {
> > + label = "cpu0-vrm0";
> > + reg = <6>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 7 {
> > + label = "rtc-battery";
> > + reg = <7>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 8 {
> > + label = "base-blyth";
> > + reg = <8>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 9 {
> > + label = "pcieslot6";
> > + reg = <9>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 10 {
> > + label = "pcieslot7";
> > + reg = <10>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 11 {
> > + label = "pcieslot8";
> > + reg = <11>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 12 {
> > + label = "pcieslot9";
> > + reg = <12>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 13 {
> > + label = "pcieslot10";
> > + reg = <13>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 14 {
> > + label = "pcieslot11";
> > + reg = <14>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 15 {
> > + label = "tpm-wilson";
> > + reg = <15>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > + };
> > +
> > + si7021-a20 at 40 {
> > + compatible = "silabs,si7020";
> > + reg = <0x40>;
> > + };
> > +
> > + tmp275 at 48 {
> > + compatible = "ti,tmp275";
> > + reg = <0x48>;
> > + };
> > +
> > + max: max31785 at 52 {
> > + compatible = "maxim,max31785a";
> > + reg = <0x52>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + fan0: fan at 0 {
> > + compatible = "pmbus-fan";
> > + reg = <0>;
> > + tach-pulses = <2>;
> > + };
> > +
> > + fan1: fan at 1 {
> > + compatible = "pmbus-fan";
> > + reg = <1>;
> > + tach-pulses = <2>;
> > + };
> > +
> > + fan2: fan at 2 {
> > + compatible = "pmbus-fan";
> > + reg = <2>;
> > + tach-pulses = <2>;
> > + };
> > +
> > + fan3: fan at 3 {
> > + compatible = "pmbus-fan";
> > + reg = <3>;
> > + tach-pulses = <2>;
> > + };
> > +
> > + fan4: fan at 4 {
> > + compatible = "pmbus-fan";
> > + reg = <4>;
> > + tach-pulses = <2>;
> > + };
> > +
> > + fan5: fan at 5 {
> > + compatible = "pmbus-fan";
> > + reg = <5>;
> > + tach-pulses = <2>;
> > + };
> > + };
> > +
> > + pca0: pca9552 at 61 {
> > + compatible = "nxp,pca9552";
> > + reg = <0x61>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + led at 0 {
> > + label = "fan0";
> > + reg = <0>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 1 {
> > + label = "fan1";
> > + reg = <1>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 2 {
> > + label = "fan2";
> > + reg = <2>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 3 {
> > + label = "fan3";
> > + reg = <3>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 4 {
> > + label = "fan4";
> > + reg = <4>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 5 {
> > + label = "fan5";
> > + reg = <5>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 8 {
> > + reg = <8>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 9 {
> > + reg = <9>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 10 {
> > + reg = <10>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 11 {
> > + reg = <11>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 12 {
> > + reg = <12>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 13 {
> > + reg = <13>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 14 {
> > + reg = <14>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 15 {
> > + reg = <15>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + ibm-panel at 62 {
> > + compatible = "ibm,op-panel";
> > + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
> > + };
> > +
> > + dps: dps310 at 76 {
> > + compatible = "infineon,dps310";
> > + reg = <0x76>;
> > + #io-channel-cells = <0>;
> > + };
> > +
> > + eeprom at 50 {
> > + compatible = "atmel,24c64";
> > + reg = <0x50>;
> > + };
> > +
> > + eeprom at 51 {
> > + compatible = "atmel,24c64";
> > + reg = <0x51>;
> > + };
> > +};
> > +
> > +&i2c8 {
> > + status = "okay";
> > +
> > + ucd90320 at 11 {
> > + compatible = "ti,ucd90320";
> > + reg = <0x11>;
> > + };
> > +
> > + rtc at 32 {
> > + compatible = "epson,rx8900";
> > + reg = <0x32>;
> > + };
> > +
> > + tmp275 at 48 {
> > + compatible = "ti,tmp275";
> > + reg = <0x48>;
> > + };
> > +
> > + tmp275 at 4a {
> > + compatible = "ti,tmp275";
> > + reg = <0x4a>;
> > + };
> >
> > eeprom at 50 {
> > compatible = "atmel,24c64";
> > reg = <0x50>;
> > };
> >
> > - eeprom at 51 {
> > + eeprom at 51 {
> > + compatible = "atmel,24c64";
> > + reg = <0x51>;
> > + };
> > +
> > + pca_pres2: pca9552 at 61 {
> > + compatible = "nxp,pca9552";
> > + reg = <0x61>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio-line-names =
> > + "SLOT6_PRSNT_EN_RSVD",
> > "SLOT7_PRSNT_EN_RSVD",
> > + "SLOT8_PRSNT_EN_RSVD",
> > "SLOT9_PRSNT_EN_RSVD",
> > + "SLOT10_PRSNT_EN_RSVD",
> > "SLOT11_PRSNT_EN_RSVD",
> > + "SLOT6_EXPANDER_PRSNT_N",
> > "SLOT7_EXPANDER_PRSNT_N",
> > + "SLOT8_EXPANDER_PRSNT_N",
> > "SLOT9_EXPANDER_PRSNT_N",
> > + "SLOT10_EXPANDER_PRSNT_N",
> > "SLOT11_EXPANDER_PRSNT_N",
> > + "", "", "", "";
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 8 {
> > + reg = <8>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 9 {
> > + reg = <9>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 10 {
> > + reg = <10>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 11 {
> > + reg = <11>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 12 {
> > + reg = <12>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 13 {
> > + reg = <13>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 14 {
> > + reg = <14>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 15 {
> > + reg = <15>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > +};
> > +
> > +&i2c9 {
> > + status = "okay";
> > +
> > + tmp423a at 4c {
> > + compatible = "ti,tmp423";
> > + reg = <0x4c>;
> > + };
> > +
> > + tmp423b at 4d {
> > + compatible = "ti,tmp423";
> > + reg = <0x4d>;
> > + };
> > +
> > + eeprom at 50 {
> > + compatible = "atmel,24c128";
> > + reg = <0x50>;
> > + };
> > +};
> > +
> > +&i2c10 {
> > + status = "okay";
> > +
> > + tmp423a at 4c {
> > + compatible = "ti,tmp423";
> > + reg = <0x4c>;
> > + };
> > +
> > + tmp423b at 4d {
> > + compatible = "ti,tmp423";
> > + reg = <0x4d>;
> > + };
> > +
> > + eeprom at 50 {
> > + compatible = "atmel,24c128";
> > + reg = <0x50>;
> > + };
> > +};
> > +
> > +&i2c11 {
> > + status = "okay";
> > +
> > + tmp275 at 48 {
> > + compatible = "ti,tmp275";
> > + reg = <0x48>;
> > + };
> > +
> > + tmp275 at 49 {
> > + compatible = "ti,tmp275";
> > + reg = <0x49>;
> > + };
> > +
> > + pca9551 at 60 {
> > + compatible = "nxp,pca9551";
> > + reg = <0x60>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + led at 0 {
> > + label = "cablecard10-cxp-top";
> > + reg = <0>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 1 {
> > + label = "cablecard10-cxp-bot";
> > + reg = <1>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca9546 at 70 {
> > + compatible = "nxp,pca9546";
> > + reg = <0x70>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "okay";
> > + i2c-mux-idle-disconnect;
> > +
> > + i2c11mux0chn0: i2c at 0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0>;
> > +
> > + eeprom at 50 {
> > + compatible = "atmel,24c64";
> > + reg = <0x50>;
> > + };
> > + };
> > +
> > + i2c11mux0chn1: i2c at 1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <1>;
> > +
> > + eeprom at 51 {
> > + compatible = "atmel,24c64";
> > + reg = <0x51>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c12 {
> > + status = "okay";
> > +};
> > +
> > +&i2c13 {
> > + status = "okay";
> > +
> > + eeprom at 50 {
> > compatible = "atmel,24c64";
> > - reg = <0x51>;
> > + reg = <0x50>;
> > };
> >
> > - pca_pres2: pca9552 at 61 {
> > + pca9552 at 60 {
> > compatible = "nxp,pca9552";
> > - reg = <0x61>;
> > + reg = <0x60>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > +
> > gpio-controller;
> > #gpio-cells = <2>;
> >
> > - gpio-line-names =
> > - "SLOT6_PRSNT_EN_RSVD",
> > "SLOT7_PRSNT_EN_RSVD",
> > - "SLOT8_PRSNT_EN_RSVD",
> > "SLOT9_PRSNT_EN_RSVD",
> > - "SLOT10_PRSNT_EN_RSVD",
> > "SLOT11_PRSNT_EN_RSVD",
> > - "SLOT6_EXPANDER_PRSNT_N",
> > "SLOT7_EXPANDER_PRSNT_N",
> > - "SLOT8_EXPANDER_PRSNT_N",
> > "SLOT9_EXPANDER_PRSNT_N",
> > - "SLOT10_EXPANDER_PRSNT_N",
> > "SLOT11_EXPANDER_PRSNT_N",
> > - "", "", "", "";
> > -
> > - gpio at 0 {
> > + led at 0 {
> > + label = "nvme0";
> > reg = <0>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 1 {
> > + led at 1 {
> > + label = "nvme1";
> > reg = <1>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 2 {
> > + led at 2 {
> > + label = "nvme2";
> > reg = <2>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 3 {
> > + led at 3 {
> > + label = "nvme3";
> > reg = <3>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 4 {
> > + led at 4 {
> > + label = "nvme4";
> > reg = <4>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 5 {
> > + led at 5 {
> > + label = "nvme5";
> > reg = <5>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 6 {
> > + led at 6 {
> > + label = "nvme6";
> > reg = <6>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - gpio at 7 {
> > + led at 7 {
> > + label = "nvme7";
> > reg = <7>;
> > - type = <PCA955X_TYPE_GPIO>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > gpio at 8 {
> > @@ -1585,111 +2563,128 @@ gpio at 15 {
> > type = <PCA955X_TYPE_GPIO>;
> > };
> > };
> > -
> > };
> >
> > -&i2c9 {
> > +&i2c14 {
> > status = "okay";
> >
> > - tmp423a at 4c {
> > - compatible = "ti,tmp423";
> > - reg = <0x4c>;
> > - };
> > -
> > - tmp423b at 4d {
> > - compatible = "ti,tmp423";
> > - reg = <0x4d>;
> > - };
> > -
> > eeprom at 50 {
> > - compatible = "atmel,24c128";
> > + compatible = "atmel,24c64";
> > reg = <0x50>;
> > };
> > -};
> >
> > -&i2c10 {
> > - status = "okay";
> > + pca9552 at 60 {
> > + compatible = "nxp,pca9552";
> > + reg = <0x60>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> >
> > - tmp423a at 4c {
> > - compatible = "ti,tmp423";
> > - reg = <0x4c>;
> > - };
> > + gpio-controller;
> > + #gpio-cells = <2>;
> >
> > - tmp423b at 4d {
> > - compatible = "ti,tmp423";
> > - reg = <0x4d>;
> > - };
> > + led at 0 {
> > + label = "nvme8";
> > + reg = <0>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - eeprom at 50 {
> > - compatible = "atmel,24c128";
> > - reg = <0x50>;
> > - };
> > -};
> > + led at 1 {
> > + label = "nvme9";
> > + reg = <1>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > -&i2c11 {
> > - status = "okay";
> > + led at 2 {
> > + label = "nvme10";
> > + reg = <2>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - tmp275 at 48 {
> > - compatible = "ti,tmp275";
> > - reg = <0x48>;
> > - };
> > + led at 3 {
> > + label = "nvme11";
> > + reg = <3>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - tmp275 at 49 {
> > - compatible = "ti,tmp275";
> > - reg = <0x49>;
> > - };
> > + led at 4 {
> > + label = "nvme12";
> > + reg = <4>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - pca9546 at 70 {
> > - compatible = "nxp,pca9546";
> > - reg = <0x70>;
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - status = "okay";
> > - i2c-mux-idle-disconnect;
> > + led at 5 {
> > + label = "nvme13";
> > + reg = <5>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - i2c11mux0chn0: i2c at 0 {
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - reg = <0>;
> > + led at 6 {
> > + label = "nvme14";
> > + reg = <6>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> >
> > - eeprom at 50 {
> > - compatible = "atmel,24c64";
> > - reg = <0x50>;
> > - };
> > + led at 7 {
> > + label = "nvme15";
> > + reg = <7>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > };
> >
> > - i2c11mux0chn1: i2c at 1 {
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - reg = <1>;
> > + gpio at 8 {
> > + reg = <8>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> >
> > - eeprom at 51 {
> > - compatible = "atmel,24c64";
> > - reg = <0x51>;
> > - };
> > + gpio at 9 {
> > + reg = <9>;
> > + type = <PCA955X_TYPE_GPIO>;
> > };
> > - };
> > -};
> >
> > -&i2c12 {
> > - status = "okay";
> > -};
> > + gpio at 10 {
> > + reg = <10>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> >
> > -&i2c13 {
> > - status = "okay";
> > + gpio at 11 {
> > + reg = <11>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> >
> > - eeprom at 50 {
> > - compatible = "atmel,24c64";
> > - reg = <0x50>;
> > - };
> > -};
> > + gpio at 12 {
> > + reg = <12>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> >
> > -&i2c14 {
> > - status = "okay";
> > + gpio at 13 {
> > + reg = <13>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> >
> > - eeprom at 50 {
> > - compatible = "atmel,24c64";
> > - reg = <0x50>;
> > + gpio at 14 {
> > + reg = <14>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 15 {
> > + reg = <15>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > };
> > };
> >
> > @@ -1700,6 +2695,120 @@ eeprom at 50 {
> > compatible = "atmel,24c64";
> > reg = <0x50>;
> > };
> > +
> > + pca9552 at 60 {
> > + compatible = "nxp,pca9552";
> > + reg = <0x60>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + led at 0 {
> > + label = "nvme16";
> > + reg = <0>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 1 {
> > + label = "nvme17";
> > + reg = <1>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 2 {
> > + label = "nvme18";
> > + reg = <2>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 3 {
> > + label = "nvme19";
> > + reg = <3>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 4 {
> > + label = "nvme20";
> > + reg = <4>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 5 {
> > + label = "nvme21";
> > + reg = <5>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 6 {
> > + label = "nvme22";
> > + reg = <6>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + led at 7 {
> > + label = "nvme23";
> > + reg = <7>;
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + type = <PCA955X_TYPE_LED>;
> > + };
> > +
> > + gpio at 8 {
> > + reg = <8>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 9 {
> > + reg = <9>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 10 {
> > + reg = <10>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 11 {
> > + reg = <11>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 12 {
> > + reg = <12>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 13 {
> > + reg = <13>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 14 {
> > + reg = <14>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 15 {
> > + reg = <15>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > };
> >
> > &vuart1 {
> > --
> > 2.27.0
> >
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs
2021-09-03 21:48 [PATCH 0/2] ARM: dts: aspeed: p10 i2c and leds additions Eddie James
@ 2021-09-03 21:48 ` Eddie James
0 siblings, 0 replies; 6+ messages in thread
From: Eddie James @ 2021-09-03 21:48 UTC (permalink / raw)
To: linux-aspeed
Add all the missing system LEDs. These are all connected by GPIO
expanders.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 1133 +++++++++++++++++-
1 file changed, 1121 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index d1467d5163f2..f222aea91b2e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -1126,6 +1126,62 @@ tmp275 at 4a {
reg = <0x4a>;
};
+ pca9551 at 60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "cablecard0-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "cablecard0-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
pca9546 at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
@@ -1182,6 +1238,118 @@ tmp275 at 49 {
reg = <0x49>;
};
+ pca9551 at 60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "cablecard3-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "cablecard3-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca9551 at 61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "cablecard4-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "cablecard4-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
pca9546 at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
@@ -1290,6 +1458,531 @@ &i2c7 {
multi-master;
status = "okay";
+ pca9552 at 30 {
+ compatible = "ibm,pca9552";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "pcieslot0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "pcieslot1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "pcieslot2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "pcieslot3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "pcieslot4";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "cpu1";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "cpu-vrm1";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led at 8 {
+ label = "lcd-russel";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca9552 at 31 {
+ compatible = "ibm,pca9552";
+ reg = <0x31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "ddimm0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "ddimm1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "ddimm2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "ddimm3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "ddimm4";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "ddimm5";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "ddimm6";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "ddimm7";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 8 {
+ label = "ddimm8";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 9 {
+ label = "ddimm9";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 10 {
+ label = "ddimm10";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 11 {
+ label = "ddimm11";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 12 {
+ label = "ddimm12";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 13 {
+ label = "ddimm13";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 14 {
+ label = "ddimm14";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 15 {
+ label = "ddimm15";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca9552 at 32 {
+ compatible = "ibm,pca9552";
+ reg = <0x32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "ddimm16";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "ddimm17";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "ddimm18";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "ddimm19";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "ddimm20";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "ddimm21";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "ddimm22";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "ddimm23";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 8 {
+ label = "ddimm24";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 9 {
+ label = "ddimm25";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 10 {
+ label = "ddimm26";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 11 {
+ label = "ddimm27";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 12 {
+ label = "ddimm28";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 13 {
+ label = "ddimm29";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 14 {
+ label = "ddimm30";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 15 {
+ label = "ddimm31";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca9552 at 33 {
+ compatible = "ibm,pca9552";
+ reg = <0x33>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "planar";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "cpu0";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led at 3 {
+ label = "dasd-pyramid0";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "dasd-pyramid1";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "dasd-pyramid2";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "cpu0-vrm0";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "rtc-battery";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 8 {
+ label = "base-blyth";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 9 {
+ label = "pcieslot6";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 10 {
+ label = "pcieslot7";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 11 {
+ label = "pcieslot8";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 12 {
+ label = "pcieslot9";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 13 {
+ label = "pcieslot10";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 14 {
+ label = "pcieslot11";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 15 {
+ label = "tpm-wilson";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
si7021-a20 at 40 {
compatible = "silabs,si7020";
reg = <0x40>;
@@ -1352,34 +2045,52 @@ pca0: pca9552 at 61 {
gpio-controller;
#gpio-cells = <2>;
- gpio at 0 {
+ led at 0 {
+ label = "fan0";
reg = <0>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 1 {
+ led at 1 {
+ label = "fan1";
reg = <1>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 2 {
+ led at 2 {
+ label = "fan2";
reg = <2>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 3 {
+ led at 3 {
+ label = "fan3";
reg = <3>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 4 {
+ led at 4 {
+ label = "fan4";
reg = <4>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio at 5 {
+ led at 5 {
+ label = "fan5";
reg = <5>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
gpio at 6 {
@@ -1639,6 +2350,62 @@ tmp275 at 49 {
reg = <0x49>;
};
+ pca9551 at 60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "cablecard10-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "cablecard10-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
pca9546 at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
@@ -1682,6 +2449,120 @@ eeprom at 50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
+
+ pca9552 at 60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "nvme0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "nvme1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "nvme2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "nvme3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "nvme4";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "nvme5";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "nvme6";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "nvme7";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
&i2c14 {
@@ -1691,6 +2572,120 @@ eeprom at 50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
+
+ pca9552 at 60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "nvme8";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "nvme9";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "nvme10";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "nvme11";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "nvme12";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "nvme13";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "nvme14";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "nvme15";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
&i2c15 {
@@ -1700,6 +2695,120 @@ eeprom at 50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
+
+ pca9552 at 60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "nvme16";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "nvme17";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "nvme18";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "nvme19";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "nvme20";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "nvme21";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "nvme22";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "nvme23";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio at 8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio at 15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
&vuart1 {
--
2.27.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs
@ 2021-09-03 21:48 ` Eddie James
0 siblings, 0 replies; 6+ messages in thread
From: Eddie James @ 2021-09-03 21:48 UTC (permalink / raw)
To: linux-aspeed; +Cc: linux-arm-kernel, joel, andrew, lkammath, Eddie James
Add all the missing system LEDs. These are all connected by GPIO
expanders.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 1133 +++++++++++++++++-
1 file changed, 1121 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index d1467d5163f2..f222aea91b2e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -1126,6 +1126,62 @@ tmp275@4a {
reg = <0x4a>;
};
+ pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard0-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard0-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
pca9546@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
@@ -1182,6 +1238,118 @@ tmp275@49 {
reg = <0x49>;
};
+ pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard3-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard3-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca9551@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard4-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard4-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
pca9546@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
@@ -1290,6 +1458,531 @@ &i2c7 {
multi-master;
status = "okay";
+ pca9552@30 {
+ compatible = "ibm,pca9552";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "pcieslot0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "pcieslot1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "pcieslot2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "pcieslot3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "pcieslot4";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "cpu1";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "cpu-vrm1";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led@8 {
+ label = "lcd-russel";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca9552@31 {
+ compatible = "ibm,pca9552";
+ reg = <0x31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "ddimm0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "ddimm1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "ddimm2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "ddimm3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "ddimm4";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "ddimm5";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "ddimm6";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "ddimm7";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "ddimm8";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "ddimm9";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "ddimm10";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "ddimm11";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "ddimm12";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "ddimm13";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "ddimm14";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "ddimm15";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca9552@32 {
+ compatible = "ibm,pca9552";
+ reg = <0x32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "ddimm16";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "ddimm17";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "ddimm18";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "ddimm19";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "ddimm20";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "ddimm21";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "ddimm22";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "ddimm23";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "ddimm24";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "ddimm25";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "ddimm26";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "ddimm27";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "ddimm28";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "ddimm29";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "ddimm30";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "ddimm31";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca9552@33 {
+ compatible = "ibm,pca9552";
+ reg = <0x33>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "planar";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cpu0";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led@3 {
+ label = "dasd-pyramid0";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "dasd-pyramid1";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "dasd-pyramid2";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "cpu0-vrm0";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "rtc-battery";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "base-blyth";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "pcieslot6";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "pcieslot7";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "pcieslot8";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "pcieslot9";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "pcieslot10";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "pcieslot11";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "tpm-wilson";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
si7021-a20@40 {
compatible = "silabs,si7020";
reg = <0x40>;
@@ -1352,34 +2045,52 @@ pca0: pca9552@61 {
gpio-controller;
#gpio-cells = <2>;
- gpio@0 {
+ led@0 {
+ label = "fan0";
reg = <0>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio@1 {
+ led@1 {
+ label = "fan1";
reg = <1>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio@2 {
+ led@2 {
+ label = "fan2";
reg = <2>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio@3 {
+ led@3 {
+ label = "fan3";
reg = <3>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio@4 {
+ led@4 {
+ label = "fan4";
reg = <4>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
- gpio@5 {
+ led@5 {
+ label = "fan5";
reg = <5>;
- type = <PCA955X_TYPE_GPIO>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
};
gpio@6 {
@@ -1639,6 +2350,62 @@ tmp275@49 {
reg = <0x49>;
};
+ pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard10-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard10-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
pca9546@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
@@ -1682,6 +2449,120 @@ eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
+
+ pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "nvme0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "nvme1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "nvme2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "nvme3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "nvme4";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "nvme5";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "nvme6";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "nvme7";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
&i2c14 {
@@ -1691,6 +2572,120 @@ eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
+
+ pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "nvme8";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "nvme9";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "nvme10";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "nvme11";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "nvme12";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "nvme13";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "nvme14";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "nvme15";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
&i2c15 {
@@ -1700,6 +2695,120 @@ eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
+
+ pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "nvme16";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "nvme17";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "nvme18";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "nvme19";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "nvme20";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "nvme21";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "nvme22";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "nvme23";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
&vuart1 {
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-09-03 21:51 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-08-30 21:46 [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs Eddie James
2021-08-30 21:46 ` [PATCH 2/2] ARM: dts: aspeed: everest: Add I2C bus 15 muxes Eddie James
2021-09-03 0:08 ` [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs Joel Stanley
2021-09-03 21:40 ` Eddie James
-- strict thread matches above, loose matches on Subject: below --
2021-09-03 21:48 [PATCH 0/2] ARM: dts: aspeed: p10 i2c and leds additions Eddie James
2021-09-03 21:48 ` [PATCH 1/2] ARM: dts: aspeed: rainier: Add system LEDs Eddie James
2021-09-03 21:48 ` Eddie James
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.